2013-3- 2012.11.22 11:22 PM 69 G4-1.25G(Mac 1) JETPDF 2400DPI 175LPI T SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS CK Chip type, Low Impedance, High CV Series Low Impedance Solvent Proof *Chip type, low impedance temperature range up to 105 C *Designed for surface mounting on high density PC board *Applicable to automatic insertion machine using carrier tape *Complied to the RoHS directive Item Operating temperature range Leakage current max. Capacitance tolerance Characteristics -55 ~ +105 C I = 0.01CV or 3 A whichever is greater (after 2 minutes) 20% at 120Hz, 20 C Dissipation factor max. (at 120Hz, 20 C) WV tan Low temperature characteristics (Impedance ratio at 120Hz) WV Z-25 C/Z+20 C Z-55 C/Z+20 C Load life (after application of the rated voltage for 2000 hours at 105 C) 6.3 0.24 Leakage current Capacitance change tan 10 0.19 6.3 2 3 16 0.16 25 0.14 10 2 3 35 0.12 16 2 3 50 0.12 25 2 3 63 0.10 35 2 3 80 0.10 100 0.10 50 2 3 63~100 3 4 Less than specified value Within 25% of initial value Less than 200% of specified value After 1000 hours no load test, leakage current, capacitance and tanare same as load life value. The measurement shall be performed at 20 C by the KS C 6035 clause 5.4. Resistance to soldering heat The following specifications shall be satisfied when the capacitors are restored to 20 C after exposing them at 250 C for 10 seconds. Less than specified value Leakage current Within 10% of initial value Capacitance change Less than specified value tan DRAWING Unit : mm -Series code of CK is "K" K (O6.3,O8x6.2) ODxL 6.3x5.8 6.3x7.7 8x6.2 8x10 10x10 12.5x13.5 A B C 2.4 6.6 6.6 2.4 6.6 6.6 3.3 8.3 8.3 2.9 8.3 8.3 3.2 10.3 10.3 4.6 12.8 12.8 E 2.2 2.2 2.3 3.1 4.5 4.5 R 0.5~0.8 0.5~0.8 0.5~0.8 0.8~1.1 0.8~1.1 0.8~1.4 K (O8x10, O10x10) (O12.5x13.5) 69 CHIP TYPES Shelf life (at 105 C) 2013-3- 2012.11.22 11:22 PM 70 G4-1.25G(Mac 1) JETPDF 2400DPI 175LPI T SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS CK series DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV F 6.3 10 16 25 35 50 10 6.3x5.8 0.88 165 15 6.3x5.8 0.88 165 22 6.3x5.8 0.88 165 6.3x7.7 0.68 280 6.3x5.8 0.44 230 6.3x5.8 0.44 230 6.3x5.8 0.44 230 33 8x6.2 0.63 300 6.3x7.7 0.68 280 6.3x5.8 0.44 230 6.3x5.8 0.44 230 6.3x5.8 0.44 230 6.3x5.8 0.44 230 47 8x6.2 0.63 300 8x10 0.34 450 6.3x7.7 0.34 280 6.3x5.8 0.44 230 6.3x5.8 0.44 230 6.3x5.8 0.44 230 6.3x5.8 0.44 230 68 8x6.2 0.26 300 8x10 0.17 450 10x10 0.18 670 8x10 0.17 450 6.3x7.7 0.34 280 6.3x5.8 0.44 230 6.3x5.8 0.44 230 6.3x5.8 0.44 230 100 8x6.2 0.26 300 8x10 0.17 450 8x10 0.17 450 10x10 0.09 670 6.3x7.7 0.34 280 6.3x5.8 0.44 230 6.3x5.8 0.44 230 150 8x6.2 0.26 300 6.3x7.7 0.34 280 6.3x7.7 0.34 280 6.3x5.8 0.44 230 220 8x6.2 0.26 300 8x6.2 0.26 300 8x10 0.17 450 0.17 450 10x10 0.09 670 8x10 0.17 450 10x10 0.09 670 6.3x7.7 0.34 280 330 8x6.2 0.26 300 470 8x10 0.17 450 680 8x10 0.17 450 10x10 0.09 670 1000 10x10 0.09 670 1500 10x10 0.09 670 WV F 10 22 33 47 68 100 150 220 8x10 63 6.3x5.8 6.3x7.7 8x10 8x10 10x10 10x10 12.5x13.5 12.5x13.5 80 2.3 2.1 0.9 0.9 0.45 0.45 0.32 0.32 80 120 250 250 400 400 800 800 6.3x7.7 8x10 8x10 10x10 12.5x13.5 12.5x13.5 12.5x13.5 100 2.4 1.3 1.3 0.7 0.45 0.45 0.45 60 130 130 200 500 500 500 8x10 10x10 12.5x13.5 12.5x13.5 1.3 0.7 0.45 0.45 130 200 500 500 Ripple current (mA r ms) at 105 C, 100kHz Impedance () at 20 C, 100kHz Case size OD X L (mm) FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT 70 Frequency 50Hz 120Hz 300Hz 1kHz 10kHz Coefficient 0.35 0.5 0.64 0.83 1.00