Phone 707-778-6311 • Fax 707-778-6401 • E-mail 73024.2314@compuserve.com • Website http://www.schurterinc.com
COMBI
FIT
see next page for drilling diagram and panel cut-out see next page for drilling diagram and panel cut-out
Pcb Mount, Snap-in or Screw-on • AC Inlet • AC Outlet
On / off Line Switch • Fuseholder for 5 x 20mm Fuses
Standards: IEC 320/C14/F; IEC 127-6; EN 60320; EN 60127-6. Fusedrawer meets tool-
only accessibility requirements of medical standards IEC 601-1, BS5724 part 1, DIN/VDE
0750 part 1.
AC inlet / outlet
AC inlet / switch
Complete MULTI
FIT
family on page 10
•Power entry module with line switch, fuseholder or inlet/outlet
•For “cold” connections 65° C, Protection Class I.
•Pcb mount with snap-in or screw-on feet (self-tapping M3 screws
provided, ø 3 x 8mm)
•Panel mount from rear or "sandwich" between top and bottom / side to
side panels
•Single or double pole shocksafe fuseholder according to IEC 65/VDE
0860 for 5 x 20mm fuses
•Integral 1-pole SPST on/off line switch or 2-pole DPST switch (70A/3-
4ms in-rush max.; 10,000 cycles lifetime)
• Insulation cover in back protects against inadvertant electric contact
•Ground terminal solder/quick-connect .187 x .032" (4.8 x 0.8mm) or
.250 x .032" (6.3 x 0.8mm)
•0.5 Nm screw torque required for screw-on type
•Max. power dissipation 3.2 watts (1-pole fusing) or 5 watts (2-pole fusing)
according to IEC 127-6. For additional values Pv in function of Tamb , see
page 6.
•For materials, options and accessories please see page 23
• For inlets with piggy-back fuse clips see GSF, page 13
Inlet / switch Inlet / outlet
UL recognition 10A/250V1) File #E96454 10A/250V File #E103791
CSA certification 10A/250V1) File #LR38456 10A/250V File #LR38456
VDE approval 10A/250V2) File #83482 10A/250V File #83482
SEMKO approval 10A/250V2) 10A/250V
SEV approval 10A/250V2) 10A/250V
1) 10A/250V approval with 1/2 HP; 10A/125V approval with 1/3 HP
2) 4A inductive load
Inlet / fuseholder
UL recognitation 10A/250V File #E93617
CSA certification 10A/250V File #LR38456
VDE approval 10A/250V File #83482
SEMKO approval 10A/250V
SEV approval 10A/250V
NEW
AC inlet / fuseholder
Medical
Fusedrawer
Screw-on pcb mountingSnap-in pcb mounting
Optional “back-pack”
FILTER
FIT
(see pg. 45)
Optional “back-pack”
SURGE
FIT
(see pg. 45)
Cascading multi-function design
streamlines packaging
File
numbers
on request
File numbers
on request
Continued ➠
Phone 707-778-6311 • Fax 707-778-6401 • E-mail 73024.2314@compuserve.com • Website http://www.schurterinc.com
COMBI
FIT
continued
Printed circuit board mounting
Panel mounting
Order Numbers
Stable snap feet requires
minimal insertion force Module must lay flat on the
pcb when soldering (see
diagram below)
0.5 Nm torque required for
screws
Insertion
from behind
“Sandwich”
mounting with
split enclosure panels
Screw-on mount uses self-
tapping screws
For 2-pole inlet/switch,2-pole
inlet/fuseholder and inlet/outlet For 1-pole inlet/switch and
1-pole inlet/fuseholder
Other dimensions for
2-pole modules:
d1 = 6 ± 0.05 (snap-in)
d1 = 3.6 (screw-on)
d2 = 2 ± 0.1 (screw-on)
Tolerances not marked:
≤ 15 = ± 0.05
≥ 15 = ± 0.1
Ground Terminal
0 = protection class II, without ground
1* = protection class I, solder/quick-connect
4.8 x 0.8mm, in connector axis
2 = protection class I, solder/quick-connect
6.3 x 0.8mm, in connector axis
6 = protection class I, solder/quick-connect
4.8 x 0.8mm, 90˚ to connector axis
7 = protection class I, solder/quick-connect
6.3 x 0.8mm, 90˚ to connector axis
KP01. 1 X X X . X X
Line switch
0 = without switch
non-illuminated illuminated 100- 250V~
1* = black 7*= red
2 = white 8*= green
3 = red 9 = orange
4 = green
5 = orange
Mounting
For snap-in Pcb mount (thickness 1.6 mm):
11 = slot for panel, thickness S = 1.0mm
12*= slot for panel, thickness S = 1.5 – 2.0mm
13*= slot for panel, thickness S = 2.5 – 3.0mm
14 = slot for panel, thickness S = 3.5 – 4.0mm
15 = without slot for panel fixation
For screw-on Pcb mount (thickness 1.2-2.5mm):
With or without self-tapping screws, ø3 x 8mm
With Without
51 61 panel thickness S = 1.0mm
52* 62 panel thickness S = 1.5 – 2.0mm
53* 63 panel thickness S = 2.5 – 3.0mm
54 64 panel thickness S = 3.5 – 4.0mm
55 65 panel thickness S = 0
Standard combinations
0 = AC inlet with ac outlet
1 = AC inlet with on/off line switch, 2-pole
2 = AC inlet with on/off line switch, 1-pole
3 = AC inlet with fuseholder, 2-pole
4 = AC inlet with fuseholder, 1-pole
* standard configuration. Contact Schurter for non-standard order minimums.
Color of Housing
1* = black
Basic Specification
KP01 = Power entry module for Pcb mounting,
SNAP
FIT
or SCREW
FIT
Prtotection class I, solder/quick-connect ground
terminal 4.8 x 0.8mm in connector axis
Black unlighted rocker switch
Snap-in pcb mounting (1.6mm pcb), with bezel for
1.5-2.0mm panel
Combination ac inlet with on/off line switch (2-pole)
Black housing
Power entry module for pcb mounting
Ordering example:
KP01.1112.11
