POWER RELAY 1 POLE-- 5 A (MEDIUM LOAD CONTROL) VE SERIES RoHS compliant n FEATURES UL, CSA, VDE recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact l Low cost, miniature relay with big performance in small package --Surge strength: 4,000 V or 6,000 V l Slim type--meets high density mounting requirement l Wide operating range l Easy circuit design with completely separated terminal arrangement (coil and contact terminals) l Plastic sealed type l RoHS compliant since date code: 0434R Please see page 7 for more information l l n ORDERING INFORMATION [Example] VE - 12 H M S E - K - HV - VD (a) (*) (b) (c) (d) (e) (f ) (g) (h) (i) (a) (b) Series Name VE: VE Series Nominal Voltage Refer to the COIL DATA CHART (c) Contact Rating H : Heavy duty type (d) Contact Arrangement Nil: 1 form C (SPDT) M : 1 form A (SPST-NO) (e) Coil Type Nil: Standard type (360 mW) S : High sensitivity type (250 mW) (f) Contact Material (Rating) Nil: Gold overlay silver-nickel (N.C.: 3 A, N.O.: 5 A) E : Silver-nickel (N.C.: 3 A, N.O.: 5 A) 5 : Silver cadmium oxide (N.C.: 5 A, N.O.: 5 A) (g) Enclosure K : Plastic sealed type (h) Surge Strength Nil: Standard type (4,000 V) HV: High dielectric strength type (6,000 V) (i) Standard VD: UL, CSA, VDE approved type Note: Actual marking omits the hyphen (-) of (*) 1 VE SERIES n SAFETY STANDARD AND FILE NUMBERS UL508 (File No. E56140) C22.2 No. 14 (File No. LR35579) VDE 0435 (File No. 11039-4940-1011) Please note that UL/CSA ratings may differ from the standard ratings. Type Nominal voltage Contact rating VE-H 5 to 48 VDC Normally open: 1/14 HP 125 VAC/250 VAC 5 A 30 VDC/250 VAC, resistive Pilot duty D300 Normally close: 1/14 HP 125 VAC/250 VAC 3 A 30 VDC/250 VAC, resistive Pilot duty D150 VE-HM 5 to 48 VDC 1/12 HP 125 VAC/250 VAC 5 A 30 VDC/250 VAC, resistive Pilot duty D300 5 to 48 VDC Normally open: 1/10 HP 125 VAC/250 VAC 5 A 30 VDC/250 VAC, resistive Pilot duty D300 Normally close: 1/14 HP 125 VAC/250 VAC 5 A 30 VDC/250 VAC, resistive VE-H5 VE-HM5 VE SERIES n SPECIFICATIONS Item Contact VE-( ) HM(S)E-K VE-( ) H(S)E-K VE-( ) HM(S)5-K VE-( ) HM(S)-K VE-( ) H(S)-K Arrangement 1 form A (SPST-NO) 1 form C (SPDT) 1 form A (SPST-NO) 1 form C (SPDT) Material Gold overlay silver nickel, silver nickel Silver-cadmium oxide alloy Style Single Resistance (initial) (at 1 A 6 VDC) Maximum 70 m (VE-HM, H) Maximum 100 m (VE-HME, HE) VE-( ) H(S)5-K Maximum 200 m Rating (resistive) 5 A 250 VAC 5 A 250 VAC (N.O.) 5 A 250 VAC 3 A 250 VAC (N.C.) Maximum Carrying Current 7A Maximum Switching Power 1,250 VA (N.O.) 1,250 VA 750 VA (N.C.) Maximum Switching Voltage 250 VAC, 150 VDC Maximum Switching Current 5 A 5 A (N.O.) 5 A 3 A (N.C.) Minimum Switching Load*1 10 mA, 5 VDC (VE-HM, H), 100 mA 5 VDC (VE-HME, HE, HM5, H5) Coil Nominal Power (at 20C) Standard type: 0.36 W. High sensitivity type: 0.25 W Operate Power (at 20C) Standard type: 0.177 W. High sensitivity type: 0.13 W Operating Temperature Standard: -40C to +85C. High sensitivity: -40C to +90C (no frost) Time Value Operate (at nominal voltage) Maximum 10 ms Release (at nominal voltage) Maximum 5 ms Insulation Resistance (at 500 VDC) Minimum 1,000 M 1,250 VA between open 1,000 VAC 1 minute 750 VAC 1 minute 1,000 VAC 1 minute 750 VAC 1 minute contacts Dielectric Strength between coil 2,000 VAC 1 minute and contacts Surge Strength Standard type: 4,000 V (at 2 x 10 s) High dielectric strength type: 6,000 V (at 2 x 10 s) Life Mechanical 1 x 107 operations minimum Electrical (at Rating) Standard Type: 1 x 105 ops. min. High sensitivity type: 5 x 104 ops. min. Other Vibration Misoperation Resistance Endurance 10 to 55 Hz (double amplitude of 3.3 mm) Shock Misoperation Resistance Endurance 100 m/s2 (11 1 ms) 500 m/s2 (6 1 ms) Weight Approximately 8 g 10 to 55 Hz (double amplitude of 3.3 mm) *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. VE SERIES n COIL DATA CHART Coil Nominal resistance voltage (10%) Must operate voltage Must release voltage Nominal power VE- 5H (M) (E)-K VE- 5H (M) (E) 5-K 5 VDC 69 3.5 VDC 0.25 VDC 360 mW VE- 6H (M) (E)-K VE- 6H (M) (E) 5-K 6 VDC 100 4.2 VDC 0.3 VDC 360 mW VE- 9H (M) (E)-K VE- 9H (M) (E) 5-K 9 VDC 225 6.3 VDC 0.45 VDC 360 mW VE 12H (M) (E)-K VE-12H (M) (E) 5-K 12 VDC 400 8.4 VDC 0.6 VDC 360 mW VE-18H (M) (E)-K VE-18H (M) (E) 5-K 18 VDC 900 12.6 VDC 0.9 VDC 360 mW VE-24H (M) (E)-K VE-24H (M) (E) 5-K 24 VDC 1,600 16.8 VDC 1.2 VDC 360 mW VE-48H (M) (E)-K VE-48H (M) (E) 5-K 48 VDC 6,400 33.6 VDC 2.4 VDC 360 mW VE- 5H (M) S (E)-K VE- 5H (M) S5-K 5 VDC 100 3.6 VDC 0.25 VDC 250 mW VE- 6H (M) S (E)-K VE- 6H (M) S5-K 6 VDC 145 4.3 VDC 0.3 VDC 250 mW VE- 9H (M) S (E)-K VE- 9H (M) S5-K 9 VDC 325 6.5 VDC 0.45 VDC 250 mW VE 12H (M) S (E)-K VE-12H (M) S5-K 12 VDC 575 8.6 VDC 0.6 VDC 250 mW VE-18H (M) S (E)-K VE-18H (M) S5-K 18 VDC 1,300 13.0 VDC 0.9 VDC 250 mW VE-24H (M) S (E)-K VE-24H (M) S5-K 24 VDC 2,310 17.3 VDC 1.2 VDC 250 mW VE-48H (M) S (E)-K VE-48H (M) S5-K 48 VDC 9,220 34.7 VDC 2.4 VDC 250 mW Standard Type High Sensitive Type MODEL VE-( ) HM VE-( ) HME VE-( ) HM5 VE-( ) H VE-( ) HE VE-( ) H5 Note: All values in the table are measured at 20 C. n CHARACTERISTIC DATA VE SERIES n REFERENCE DATA VE SERIES n DIMENSIONS l Dimensions VE-M type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) VE type Unit: mm VE SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. VE SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: http://www.fujitsu.com/emea/services/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2005 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 12/12/2005.