PNP Epitaxial Silicon Transistor BSR16 PNP General Purpose Amplifier * This Device Designed for Use as General Purpose Amplifier and * * Switches Requiring Collector Currents to 500 mA Sourced from Process 63 See BCW68G for Characteristics www.onsemi.com 3 ABSOLUTE MAXIMUM RATINGS 2 (TA = 25C, unless otherwise specified.) Symbol Parameter Value Unit VCEO Collector-Emitter Voltage -60 V VCBO Collector-Base Voltage -60 V VEBO Emitter-Base Voltage -5.0 V IC Collector Current - Continuous -800 mA TJ, TST Operating and Storage Junction Temperature Range -55 ~ +150 _C 1 SOT-23 CASE 318BM MARKING DIAGRAM &Y T8&E&G Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. These ratings are based on a maximum junction temperature of 150C. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. &Y T8 &E &G THERMAL CHARACTERISTICS (TA = 25C, unless otherwise specified) Symbol PD RJA Parameter Max. Unit Total Device Dissipation Derate above 25_C 350 2.8 mW mW/_C Thermal Resistance, Junction to Ambient 357 _C/W ON Semiconductor Logo Specific Device Code Designates Space Date Code (Week) PIN ASSIGNMENT 3. Collector 3. Device mounted on FR-4 PCB 40 mm x 40 mm x 1.5 mm. 1. Base 2. Emitter ORDERING INFORMATION Device BSR16 Package Shipping SOT-23 (Pb-Free) 3,000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2002 September, 2020 - Rev. 1 1 Publication Order Number: BSR16/D BSR16 ELECTRICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) Symbol Parameter Test Conditions Min Typ Max Unit OFF CHARACTERISTICS BV(BR)CEO Collector-Emitter Breakdown Voltage IC = -10 mA, IB = 0 -60 V BV(BR)CBO Collector-Base Breakdown Voltage IC = -100 mA, IE = 0 -60 V BV(BR)EBO Emitter-Base Breakdown Voltage IE = -10 mA, IC = 0 -5.0 V ICBO Collector Cut-off Current VCB = -50 V VCB = -50 V, TA = 150_C -10 -10 nA mA ICEX Collector Cut-off Current VCE = -30 V, VEB = -0.5 V -50 nA IBEX Reverse Base Current VCE = -30 V, VEB = -3.0 V -50 nA ON CHARACTERISTICS hFE DC Current Gain IC = -0.1 mA, VCE = -10 V IC = -1.0 mA, VCE = -10 V IC = -10 mA, VCE = -10 V IC = -150 mA, VCE = -10 V IC = -500 mA, VCE = -10 V 75 100 100 100 50 300 VCE(sat) Collector-Emitter Saturation Voltage IC = -150 mA, IB = -15 mA IC = -500 mA, IB = -50 mA -0.4 -1.6 V VBE(sat) Base-Emitter Saturation Voltage IC = -150 mA, IB = -15 mA IC = -500 mA, IB = -50 mA -1.3 -2.6 V SMALL SIGNAL CHARACTERISTICS Current Gain Bandwidth Product IC = -50 mA, VCE = -20 V, f = 100 MHz, TA = 25_C Ccb Output Capacitance VCB = -10 V, IE = 0, f = 1.0 MHz 8.0 pF Ceb Emitter-Base Capacitance VCB = -2.0 V, IE = 0, f = 1.0 MHz 30 pF VCC = -30 V, IC = -150 mA, IB1 = -15 mA 45 ns 10 ns 40 ns VCC = -6 V, IC = -150 mA, IB1 = IB2 = -15 mA 100 ns 80 ns 30 ns fT 200 MHz SWITCHING CHARACTERISTICS ton Turn-On Time td Delay Time tr Rise Time toff Turn-Off Time ts Storage Time tf Fall Time Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOT-23 CASE 318BM ISSUE O DOCUMENT NUMBER: DESCRIPTION: 98AON13784G SOT-23 DATE 31 AUG 2016 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative