SKHH 6mm Square (Snap-in Type) TACT SwitchTM User friendly 6.0x6.0mm type, available in a wide variety Typical Specifications Items Specifications Sharp Feeling Ratingmax. 50mA 12V DC Ratingmin. 10A 1V DC Initial contact resistance 100m max. Travelmm 0.25 Soft Feeling Product Line Top push type Snap-in Type Product No. Operating force SKHHAJA010 Operating direction Surface Mount Type Radial Type Operating life 5mA 5V DC Stem color 0.98N 1,000,000 cycles Black SKHHALA010 1.57N 500,000 cycles Dark gray SKHHAQA010 2.55N 200,000 cycles Red SKHHAKA010 0.98N 1,000,000 cycles Black SKHHAMA010 1.57N 500,000 cycles Dark gray SKHHARA010 2.55N SKHHCQA010 3.53N SKHHCRA010 5.10N SKHHBVA010 0.98N SKHHBWA010 Red 200,000 cycles Height Minimum order unitpcs. Japan Export Drawing No. 1,000 1,000 1 h=4.3mm h=5mm Orange Yellow 1,000,000 cycles Black 1.57N 500,000 cycles Dark gray SKHHBYA010 2.55N 200,000 cycles Red SKHHANA010 0.98N 1,000,000 cycles Black SKHHAPA010 1.57N 500,000 cycles Dark gray SKHHBSA010 2.55N 200,000 cycles Red SKHHDTA010 0.98N 1,000,000 cycles Black SKHHDUA010 1.57N SKHHDHA010 0.98N SKHHDJA010 1.57N Top push h=7mm h=9.5mm h=13mm Dark gray 500,000 cycles Black h=17mm 300,000 cycles Dark gray Operating life 5mA 5V DC Stem color 1,000,000 cycles Black 500,000 cycles Dark gray 200,000 cycles Red Joint stem type Product No. Operating force SKHHCWA010 0.98N SKHHDAA010 1.57N SKHHDGA010 2.55N Operating direction Top push Height h=7.3mm Minimum order unitpcs. Japan Export Drawing No. 1,000 1,000 2 Refer to P.249 for soldering conditions. 188 SKHH6mm Square (Snap-in Type) Product Line With ground terminal type Product No. Operating force SKHHPJA010 Operating direction Black SKHHPLA010 1.57N 500,000 cycles Dark gray SKHHPQA010 2.55N 200,000 cycles Red SKHHPKA010 0.98N 1,000,000 cycles Black SKHHPMA010 1.57N 500,000 cycles Dark gray SKHHPRA010 2.55N 200,000 cycles Red SKHHQVA010 0.98N 1,000,000 cycles Black SKHHQWA010 1.57N 500,000 cycles Dark gray SKHHQYA010 2.55N 200,000 cycles Red SKHHPNA010 0.98N 1,000,000 cycles Black SKHHPPA010 1.57N 500,000 cycles Dark gray SKHHQNA010 2.55N 200,000 cycles Red Operating life 5mA 5V DC Stem color Japan Export Drawing No. 1,000 1,000 3 h=4.3mm h=5mm Top push h=7mm Surface Mount Type 1,000,000 cycles Minimum order unitpcs. Snap-in Type 0.98N Height Soft Feeling Stem color Sharp Feeling Operating life 5mA 5V DC TACT SwitchTM SKHH6mm Square (Snap-in Type) h=9.5mm Radial Type Side push type Product No. Operating force Operating direction SKHHLMA010 0.98N 1,000,000 cycles Black SKHHLNA010 1.57N 500,000 cycles Dark gray SKHHLPA010 2.55N 200,000 cycles Red SKHHLQA010 0.98N 1,000,000 cycles Black SKHHLRA010 1.57N 500,000 cycles Dark gray SKHHLSA010 2.55N 200,000 cycles Red SKHHLUA010 0.98N 1,000,000 cycles Black SKHHLVA010 1.57N 500,000 cycles Dark gray SKHHLWA010 2.55N 200,000 cycles Red SKHHNHA010 0.98N 500,000 cycles Black SKHHNJA010 1.57N 300,000 cycles Dark gray SKHHNKA010 2.55N 200,000 cycles Red Stem length Minimum order unitpcs. Japan Export Drawing No. 1,000 1,000 4 =3.85mm =8.35mm Side push =5.85mm =15.85mm Packing Specifications Bulk Product No. Number of packagespcs. 1 case /Japan 1 case /export packing Other 10,000 30,000 SKHHDT, SKHHDU SKHHDH, SKHHDJ SKHHNH, SKHHNJ SKHHNK 5,000 15,000 Export package measurementsmm 309x476x347 189 SKHH 6mm Square (Snap-in Type) No. Unit:mm Photo PC board mounting hole dimensions Viewed from switch mounting face Style Top push type H6 1 2 4.5 Sharp Feeling Stem 4 oA A 4.3 3.5 5 3.5 7 3.3 9.5 3 13 3 17 3 Snap-in Type 3.5 h 3 3.5 Soft Feeling 1 h 0.7 6.5 4.5 TACT SwitchTM Dimensions Surface Mount Type 4-o1 hole 6.5 4-o1 hole 6.5 0.7 Joint stem type 1 2 H2.4 4 4.5 Radial Type H6 Stem 4.5 3 3.5 3.5 7.3 1.8 2 0.7 H6 2 4.5 1 3 4 3 Stem oA h A 4.3 3.5 5 3.5 7 3.3 9.5 3 6.5 4.5 With ground terminal type 4.1 0.7 6.5 h 3.5 3.6 5-o1 hole 0.7 6.5 5 190 0.7 0.7 4.1 Ground terminal hole SKHH6mm Square (Snap-in Type) No. Unit:mm Photo PC board mounting hole dimensions Viewed from switch mounting face Style Side push type 7.5 4 0.3 3.5 5.85 3.3 8.35 3 15.85 3 2-o1.3 hole 7.1 2.5 4 3.85 3.5 4 2-o1 hole Snap-in Type 4.5 7 1 0.3 1 0.7 Soft Feeling Stem 6.2 A Sharp Feeling oA R TACT SwitchTM Dimensions 2.55 2.5 0.7 2 4 Surface Mount Type R 4.5 7 Note Radial Type Please use 1.6mm thick PC boards. Circuit Diagram Top push type / Joint stem type 1 2 3 4 With ground terminal type Side push type 1 2 3 5 4 1 Product Line of Knobs Applicable model 2 Unit:mm Variety Dimensions Color Model H4 Keytop Applicable to joint stem type 5.5 2.8 SKHH Red Blue Ivory Black Yellow SK2AA00410 SK2AA00420 SK2AA00430 SK2AA00440 SK2AA00450 Note The knob will be delivered together with the switch but packed separately. 191 TACT SwitchTM List of Varieties Snap-in SKHL SKHH SKHW SKQJ SKQB SKQE SKHC Features -- -- -- -- -- Long-life -- Water-proof -- -- -- -- -- -- Dust-proof -- -- -- IP standard -- -- -- -- -- -- -- Top push Side push -- -- -- -- -- -- -- W 6 D 3.5 6.6 10 12 H 4.3/5 4.3/5 5 5/13/23.2 See the relevant pages for respective product descriptions 0.3 0.25 -- -- Series TACT SwitchTM Sharp Feeling Type Type Photo See the relevant pages for respective product descriptions Snap-in Type 6 Surface Mount Type 1N max. 1N to 2N Operation force coverage Soft Feeling Dimensions mm Sharp Feeling Operating direction 2N to 3N 3N to 4N 4N to 5N Ground terminal 0.25 -- Operating temperature range Automotive use -40 to 90 0.3 -- -20 to 70 -- -- -40 to 90 -- -- -- Radial Type Travelmm -40 to 85 -- Life Cycle Electrical performance Ratingmax. Resistive load 50mA 12V DC Ratingmin. Resistive load 10A 1V DC Insulation resistance 100M min. 100V DC 1min. Voltage proof 250V AC 1min. Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively Lifetime Shall be in accordance with individual specifications. Durability Environmental performance Cold -40 96h -30 96h -40 96h Dry heat 90 96h 80 96h 90 96h Damp heat Page 60, 90 to 95%RH 1,000h 60, 90 to 95%RH 96h 186 188 192 193 195 60, 90 to 95%RH 96h 197 199 WWidth. The most outer dimension excluding terminal portion. D Depth. The most outer dimension excluding terminal portion. H Height. The minimum dimension if there are variances. TACT SwitchTM Soldering Conditions 249 TACT SwitchTM Cautions 250 Notes 1. The automotive operating temperature range to be individually discussed upon request. 2. Indicates applicability to all products in the series. 179 TACT SwitchTM List of Varieties TACT SwitchTM Sharp Feeling Type Type Snap-in Radial SKHL SKHH SKQJ SKQB SKRC Features -- -- -- -- Round terminal type Water-proof -- -- -- Dust-proof -- -- IP standard -- -- -- -- -- Top push -- -- -- -- Side push -- W 7.3 7.5 7.5 11.5 D 7.22 7.85 7.85 11.9 H 4.3 7.4 7.3 11.3 13 0.3 0.25 -- -- -- -20 to +70 -40 to +95 -30 to 85 -- -- Series Photo Sharp Feeling Soft Feeling Operating direction Snap-in Type Dimensions mm V9 Surface Mount Type 1N max. 1N to 2N Operation force coverage 2N to 3N 3N to 4N 4N to 5N Radial Type Travelmm Ground terminal 0.25 Operating temperature range Automotive use -40 to 90 Life Cycle Electrical performance Ratingmax. Resistive load 50mA 12V DC Ratingmin. Resistive load 10A 1V DC Insulation resistance 100M min. 100V DC 1min. Voltage proof 250V AC 1min. Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively Lifetime Shall be in accordance with individual specifications. Durability Environmental performance Cold -40 96h -30 96h -40 96h Dry heat 90 96h 80 96h 90 96h Damp heat Page 60, 90 to 95%RH 96h 186 188 60, 90 to 95%RH 1,000h 193 195 242 WWidth. The most outer dimension excluding terminal portion. D Depth. The most outer dimension excluding terminal portion. H Height. The minimum dimension if there are variances. TACT SwitchTM Soldering Conditions 249 TACT SwitchTM Cautions 250 Notes 1. The automotive operating temperature range to be individually discussed upon request. 2. Indicates applicability to all products in the series. 180 TACT SwitchTM / Soldering Conditions TACT SwitchTM Condition for Reflow Available for Surface Mount Type. Temperature profile Temperature (C ) 260C max. 3s max. 230C Sharp Feeling 180 150 Time Soft Feeling 120s max. pre-heating 40s max. 3 to 4min. Time inside soldering equipment Snap-in Type Notes 1. Please confirm the specifications of our product for the detailed condition. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Surface Mount Type Conditions for Auto-dip Manual Soldering Available for Snap-in Type and Radial Type. Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 100 max. Items Condition Soldering temperature 350 max. Duration of soldering 3s max. Capacity of soldering iron 60W max. Preheating time 60s max. Soldering temperature 260 max. Duration of immersion 5s max. Items Condition Number of soldering 2times max. Soldering temperature 360 max. Duration of soldering 3s max. Capacity of soldering iron 60W max. SKHH Series Radial Type Items SKHH, SKHW Series Items Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 110 max. Items Condition Preheating time 60s max. Soldering temperature 350 max. Soldering temperature 260 max. Duration of soldering 3s max. Duration of immersion 5s max. Capacity of soldering iron 20W max. Number of soldering 2times max. SKTD, SKTG, SKQJ Series SKHLTop Push Type, SKQJ Series Items Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 100 max. Preheating time 45s max. Soldering temperature 255 max. Duration of immersion 5s max. Number of soldering 2times max. Notes 1. Prevent flux penetration from the top side of the TACT SwitchTM. 2. Switch terminals and a PC board should not be coated with flux prior to soldering. 3. The second soldering should be done after the switch is stable with normal temperature. 4. Use the flux with a specific gravity of min 0.81. EC-19S-8 by TAMURA CORPORATION, or equivalents. 249