05076 PLCDA03 - PLCDA24 Only One Name Means ProTek'TionTM 500 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY Description The PLCDAxx Series are ultra low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and CMOS bus line applications against the damaging effects of ESD, tertiary lightning and switching transients. The PLCDAxx Series has a peak pulse power rating of 500 Watts for an 8/20s waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. SO-8 package Features applications * Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV * Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns * Compatible with IEC 61000-4-5 (Surge): 24A, 8/20s - Level 2(LineGnd) & Level 3(Line-Line) * 500 Watts Peak Pulse Power per Line (tp = 8/20s) * Bidirectional Configuration * Available in Multiple Voltages Ranging from 3V to 24V * Protects Two Lines * Ultra Low Capacitance: 5pF * RoHS Compliant * REACH Compliant * * * * Computer Interface Protection Ethernet - 10/100/1000 Base T Audio/Video Inputs Cellular Phone Terminals Mechanical characteristics * Molded JEDEC SO-8 Package * Approximate Weight: 70 milligrams * Lead-Free Pure-Tin Plating (Annealed) * Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C * 12mm Tape and Reel Per EIA Standard 481 * Flammability Rating UL 94V-0 PIN CONFIGURATION 05076.R10 9/12 8 7 6 5 1 2 3 4 Page 1 www.protekdevices.com 05076 PLCDA03 - PLCDA24 Only One Name Means ProTek'TionTM typical device characteristics MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS TL -55 to 150 C Storage Temperature TSTG -55 to 150 C Peak Pulse Power (tp = 8/20s) - See Figure 1 PPP 500 Watts Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER (Note 1) DEVICE MARKING RATED STAND-OFF VOLTAGE minimum breakdown voltage MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE (Note 2) VWM VOLTS @1mA V(BR) VOLTS @I P = 1A VC VOLTS @V WM ID A @0V, 1MHz C pF PLCDA03 SGA 3.3 4.5 7.0 125 5 PLCDA05 SGB 5.0 6.0 9.8 20 5 PLCDA08 SGF 8.0 8.5 13.4 10 5 PLCDA12 SGC 12.0 13.3 19.0 1 5 PLCDA15 SGD 15.0 16.7 24.0 1 5 PLCDA24 SGE 24.0 26.7 43.0 1 5 Notes 1. Devices are designed to be used in parallel (see application). For other applications, contact the factory. Do not apply surge in the forward direction of this device. 2. Do not surge from pins 8 to 1, 2 to 7, 6 to 3, and 4 to 5. PIV typically greater than 100V for each rectifier diode. Electrical characteristics apply to pins 1 to 8, 7 to 2, 3 to 6 and 5 to 4. 05076.R10 9/12 Page 2 www.protekdevices.com 05076 PLCDA03 - PLCDA24 Only One Name Means ProTek'TionTM typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 10,000 1,000 500W, 8/20s Waveform 100 10 0.1 10 100 td - Pulse Duration - s Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8s td = 20s e-t 60 40 10,000 figure 3 power derating curve Peak Pulse Power 8/20s 80 % Of Rated Power tf 100 td = t/(IPP/2) 60 40 20 20 0 1,000 figure 2 pulse wave form 120 IPP - Peak Pulse Current - % of IPP 1 0 05076.R10 9/12 5 10 15 t - Time - s 20 25 30 Page 3 0 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - C 150 www.protekdevices.com 05076 PLCDA03 - PLCDA24 Only One Name Means ProTek'TionTM typical device characteristics figure 4 overshoot & clamping voltage for PLCDA05 40 5 Volts per Division 30 20 10 0 ESD Test Pulse - 25 kilovolt, 1/30ns (Waveshape) figure 6 return loss - plcda15 50 50 20 20 10 db per Division 10 db per Division figure 5 insertion loss - plcda15 0 -20 -50 -20 -50 100 MHz per Division 05076.R10 9/12 0 100 MHz per Division Page 4 www.protekdevices.com 05076 PLCDA03 - PLCDA24 Only One Name Means ProTek'TionTM SPICE MODEL figure 1 spice model I/O ABD LCRD LCRD ABD Lg 0.7nH ABD - Avalanche Breakdown Diode (TVS) LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance table 1 - spice parameters parameter unit abd(tvs) LCRD BV V See Table 2 200 IBV A 1 0.01 Cjo pF See Table 2 5 PART NUMBER 05076.R10 9/12 IS A See Table 2 1E-13 Vj V 0.6 0.6 M - 0.33 0.33 N - 1 1 RS Ohms See Table 2 0.31 TT s 1E-8 1E-9 EG eV 1.11 1.11 table 2 - abd specific spice parameters i s (amps) bv(volts) cjo(pF) rs(ohms) PLCDA03 4.5 438 1E-11 0.21 PLCDA05 6.0 284 1E-11 0.14 PLCDA08 8.5 146 1E-13 0.275 PLCDA12 13.3 123 1E-13 0.4 PLCDA15 16.7 102 1E-13 0.52 PLCDA24 26.7 61 1E-13 1.54 Page 5 www.protekdevices.com 05076 PLCDA03 - PLCDA24 Only One Name Means ProTek'TionTM application information D+ 8 7 6 5 1 2 3 4 USB IC D- GND figure 1 - BIDIRECTIONAL COMMON-MODE USB PROTECTION Circuit connectivity is as follows: * Pins 1, 2, 3 and 4 connected to ground. * Pins 5 and 6 connected to I/O Line D+. * Pins 7 and 8 connected to I/O Line D-. circuit board recommendations Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: * The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. * The path length between the TVS device and the protected line should be minimized. * All conductive loops including power and ground loops should be minimized. * The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. * Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. 05076.R10 9/12 Page 6 www.protekdevices.com 05076 PLCDA03 - PLCDA24 Only One Name Means ProTek'TionTM SO-8 package information outline dimensions dim millimeters -A- inches min max min max A 4.80 5.00 0.189 0.196 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.054 0.068 D 0.35 0.49 0.014 0.019 F 0.40 1.25 0.016 0.049 G 1.27 BSC 8 5 -B- 1 G 4 D 0.18 0.25 0.007 0.009 K 0.10 0.25 0.004 0.008 P 5.80 6.20 0.229 0.244 R 0.25 0.50 0.010 0.019 R x 45 C 0.05 BSC J + 0.010" (0.25mm) M B M 4 PL P 0 - 10 -T- K + 0.010" (0.25mm) M T B S A S 8 PL J F NOTES 1. 2. 3. 4. 5. 6. -T- = Seating plane and datum surface. Dimensions "A" and "B" are datum. Dimensions "A" and "B" do not include mold protrusion. Maximum mold protrusion is 0.015" (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. A pad layout dimensions dim millimeters B inches min max min max A 1.14 1.40 0.045 0.055 B 0.64 0.89 0.025 0.035 C 6.22 - 0.245 - D 3.94 4.17 0.155 0.165 E 1.02 1.27 0.040 0.050 NOTES 1. Controlling dimension: inches. 05076.R10 9/12 D C E Page 7 www.protekdevices.com 05076 PLCDA03 - PLCDA24 Only One Name Means ProTek'TionTM TAPE AND REEL P0 D t 10 Pitches Cumulative Tolerance on tape 0.2 P2 E F W K0 B0 A0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7") 12mm A0 B0 K0 D E F W P0 P2 P tmax 6.50 0.10 5.40 0.10 2.00 0.10 1.50 0.10 1.75 0.10 5.50 0.05 12.00 0.30 4.00 0.12 2.00 0.10 4.00 0.10 0.25 Notes 1. 2. 3. 4. 5. 6. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7" Reel - 1,000 pieces per 12mm tape. Suffix - T13 = 13" Reel - 2,500 pieces per 12mm tape. Bulk product shipped in tubes of 98 pieces per tube. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package. Package outline, pad layout and tape specifications per document number 06009.R3 9/10. ORDERING INFORMATION base PART NUMBER (xx = Voltage) LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PLCDAxx -LF -T7 1,000 7" 98 PLCDAxx -LF -T13 2,500 13" 98 This device is only available in a Lead-Free configuration. 05076.R10 9/12 Page 8 www.protekdevices.com 05076 PLCDA03 - PLCDA24 Only One Name Means ProTek'TionTM company information COMPANY PROFILE In business more than 20 years, ProTek DevicesTM is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT (c) ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05076.R10 9/12 Page 9 www.protekdevices.com