IMS 15 Series 15 Watt DC-DC Converters Wide input voltage ranges up to 75 V DC 1 or 2 outputs up to 48 V DC 1500 V DC I/O electric strength test voltage LGA * Magnetic feedback * Short circuit protection * Industry standard 2" x 1.6" case with 10.5 mm profile Selection chart Output 1 Output 2 Input voltage Uo nom Io nom Uo nom Io nom Ui [V DC] [mA] [V DC] [mA] [V DC] 5.1 2700 14...36 5.1 2700 36...75 12 1400 14...36 12 1400 36...75 15 1120 14...36 15 1120 36...75 +5.1 1600 +3.3 1600 14...36 +5.1 1600 +3.3 1600 36...75 5 1400 5 1400 14...36 5 1400 5 1400 36...75 12 700 12 700 14...36 12 700 12 700 36...75 15 560 15 560 14...36 15 560 15 560 36...75 24 350 24 350 14...36 24 350 24 350 36...75 1 For minimum order quantity and lead time contact Power-One. www.power-one.com Edition 06/10.2001 R1 Type 24 IMS 15-05-9R 48 IMS 15-05-9R 24 IMS 15-12-9C 48 IMS 15-12-9C 24 IMS 15-15-9C 48 IMS 15-15-9C 24 IMS 15-0503-9R 48 IMS 15-0503-9R 24 IMS 15-05-05-9 48 IMS 15-05-05-9 24 IMS 15-12-12-9 48 IMS 15-12-12-9 24 IMS 15-15-15-9 48 IMS 15-15-15-9 24 IMS 15-24-24-9 48 IMS 15-24-24-9 Options1 i, C, Z i, C, Z i, Z i, Z i, C, Z i, C, Z i, C, Z i, C, Z i, C, Z i, C, Z i, Z i, Z 1 Board Mountable IMS 15 Series Input Input voltage range 24 IMS15 48 IMS15 14...36 V DC 36...75 V DC Output Output voltage setting accuracy Minimum load Line/load regulation Line regulation Load regulation Output voltage switching noise Efficiency Ui nom, 50% lo nom, models with/without R 1%/1.5% Uo nom recommended for double output models 10% lo nom Ui min...Ui max, 50% lo nom, models R (magn. feedback) 0.5% Uo nom Ui min...Ui max, 50% lo nom, models without R 1% Uo nom Ui nom , 10...100% lo nom, models without R 3% Uo nom tracking output, models without R 3% Uo nom Ui nom , 0...100% lo nom, peak-peak, total max. 1...1.5% Uo nom Ui nom , lo nom up to typ 88% Control and protection Remote shut down Trim input for Uo Magnetic feedback Input overvoltage protection Input undervoltage lock-out Overload protection No-load protection Temperature protection disabled with 0.7 V 80...105% standard for all single output and -0503-models R suppressor diode TTL-compatible input Ui min...Ui max, fully protected, hiccup mode Ui min...Ui max Safety and EMC Electric strength test voltage Electromagnetic interference I/O conducted (with external filter) radiated 1500 V DC class B class A Environmental Operating ambient temperature Ui nom, lo nom Storage temperature non operational Relative humidity non condensing -40...71C -40...100C 93% Options Inhibit input (reverse logic) C-pinout Open version www.power-one.com Edition 06/10.2001 R1 TTL-compatible, disabled with 2.4 V or open-circuit connected outputs, no options possible no housing, not lacquered i C Z 2 IMS 15 Series 15 Watt DC-DC Converters Mechanical data Tolerances 0.3 mm (0.012") unless otherwise indicated. European Projection Standard and option K 45.72 (1.8") 10.5 (0.41") 12 13 1 2 15 3 36.83 (1.45") 11 0.8 (0.03") 5.08 (0.2") 40.65 (1.6") 2.54 (0.1") S09011 4 17 bottom view Fixing hole for M2 or KA 22 self tapping screws 47 (1.85") 50.8 (2") Measuring point of case temperature TC C pinout (option C) 0.5 (0.02") 35.5 (1.4") 11.2 (0.44") 15.2 (0.6") 5.08 (0.2") o 1.0 (0.04") 3 1 4 2 20.3 (0.8") 40.65 (1.6") 1.0 (0.04") S90010 5 bottom view 50.8 (2") Measuring point of case temperature TC www.power-one.com Edition 06/10.2001 R1 3 Board Mountable IMS 15 Series Open frame version (option Z) 10.5 (0.41") 45.72 (1.8") 11 12 13 1 2 15 3 38.8 (1.52") 0.8 (0.03") 6 x 5.08 (0.2") 3 x 5.08 (0.2") o 2.54 (0.1") S90011 4 bottom view 17 48.3 (1.9") Pin allocation Pin 1 2 3 4 5 6 11 12 13 15 17 single Vi+ Vi- SD Vo+ Vo- R www.power-one.com Edition 06/10.2001 R1 Standard double Vi+ Vi- Trim SD Vo1+ Vo1- Vo2+ Vo2- n.c. -0503Vi+ Vi- n.c. SD Vo2+ Go Vo1+ Go R Option C single dual Vi+ Vi+ Vi- Vi- Vo+ Vo+ Go Vo- Vo- - 4