Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.

Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.

1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,

AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: "901/902..." MAY BE REPLACED BY "Axxx".) OTHER CODES AND

SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.

DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.

THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.

REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.

10-31-06

Revision

F

This specification sheet forms a part of the latest issue of Raychem Specification 44.

CABLE CONSTRUCTION DETAILS

PART NUMBER

44A083X-24-* 24 .117 .121 8.3

44A083X-22-* 22 .134 .140 11.9

44A083X-20-* 20 .151 .158 16.8

44A083X-18-* 18 .173 .179 24.5

44A083X-16-* 16 .192 .201 30.9

44A083X-14-* 14 .233 .242 47.4

44A083X-12-* 12 .272 .281 70.4

44A083X-10-* 10 .335 .346 109.

44A083X- 8-* 8 .462 .475 192.

44A083X- 6-* 6 .570 .585 304.

TEMPERATURE RATING: 150°C

Maximum continuous conductor temperature

VOLTAGE RATING: 600 volts (rms) at sea level

INSULATION FLAWS:

Spark Test: 5.7 kV (rms) at 3 kHz

Impulse Dielectric Test, 8.0 kV (peak)

3 nickel-coated copper

4 silver-coated high strength copper alloy (AWG's 26-20 only)

The "*" in the part numbers above shall be replaced by color code

designators with a slash separating component wire colors. Colors

shown do not necessarily reflect the sequence of manufacturing.

1/ Example: AWG 20, tin-coated copper conductors; black, brown and

red component wires: 44A0831-20-0/1/2

NOTE: Nominal values are for information only

Nominal values are not requirements.