SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 5000-hours-life, 105C New! @Endurance : 5,000 hours at 105C @Low impedance @Rated voltage range : 6.3 to 35V @Nominal capacitance range : 10 to 150MF @Suitable for high reliability products @Solvent resistant type @RoHS Compliant MVY Longer life MZK ?SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -25 to +105C 6.3 to 35Vdc P20%(M) I=0.01CV or 3MA, whichever is greater Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) 6.3V 10V 16V 25V 35V Rated voltage (Vdc) 0.32 0.28 0.26 0.16 0.14 tanE (Max.) 6.3V 10V 16V 25V 35V Rated voltage(Vdc) 4 3 2 2 2 Z(-10C)/Z(+20C) 1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47MF:470,100MF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,35V:350) Series code Category P CP0.2 BP0.2 FDP0.5 0.3max. LP0.3 AP0.2 A 5.3 6.6 11 E MZK AAA A DA AAA M AAA G W L 5.8 5.8 (at 20C,120Hz) ?PART NUMBERING SYSTEM @Terminal Code : A D 5 6.3 (at 20C, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 5,000 hours at 105C. Capacitance change [P30% of the initial value D.F. (tanE) [300% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 105C without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change [P30% of the initial value D.F. (tanE) [300% of the initial specified value Leakage current [The initial specified value ?DIMENSIONS [mm] Size code E61 F61 (at 20C,120Hz) B 5.3 6.6 C 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 P 1.4 1.9 Please refer to "Product code guide (surface mount type)" ?MARKING EX) 35V47MF 9C 47 V ZK @Rated voltage symbol Rated voltage (Vdc) 6.3 Symbol j 10 A 16 C 25 E 35 V ?STANDARD RATINGS WV (Vdc) Cap (mF) Size code Impedance (omax/20c,100kHz) Rated ripple current (mArms/105c,100kHz) 6.3 10 100 150 33 47 100 68 10 10 22 22 33 47 E61 F61 E61 E61 F61 F61 E61 F61 E61 F61 F61 F61 2.2 1.1 2.2 2.2 1.1 1.1 2.2 1.1 2.2 1.1 1.1 1.1 95 140 95 95 140 140 95 140 95 140 140 140 16 25 35 (1/1) Part No. EMZK6R3ADA101ME61G EMZK100ADA151MF61G EMZK160ADA330ME61G EMZK160ADA470ME61G EMZK160ADA101MF61G EMZK250ADA680MF61G EMZK350ADA100ME61G EMZK350ADA100MF61G EMZK350ADA220ME61G EMZK350ADA220MF61G EMZK350ADA330MF61G EMZK350ADA470MF61G CAT. No. E1001K