Specifications
SATA to eSATA Transition Cable (7Pin/7Pin), 18-
in.
MODEL NUMBER: P952-18I
Description
Tripp Lite's SATA to eSATA Transition Cable allows new eSATA devices to be connected to older style
SATA ports. Cable is optimized for data storage with up to 6Gbps transfer rate.
Features
SATA Internal "L" to External eSATA "I" Data Cable - 18 in.
●
Supports data transfer rates up to 6Gbps
●
Fully shielded cable to protect against EMI/RFI line noise
●
Highlights
SATA Internal "L" to External
eSATA "I" Cable - 18 in.
●
Supports data transfer rates of
up to 6.0 Gbps
●
Cable is shielded to protect
against EMI/RFI line noise
●
Package Includes
SATA to eSATA Transition
Cable - 18 in.
●
INPUT
Cable Length (ft.) 1.5
Cable Length (m) 0.5
Cable Length (in.) 18
Cable Length (cm) 45.72
PHYSICAL
Color Red
CONNECTIONS
Side A - Connector 1 7 PIN SATA (MALE)
1 / 2
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
Side B - Connector 1 7 PIN ESATA (MALE)
WARRANTY
Product Warranty Period
(Worldwide) Lifetime limited warranty
2 / 2
