Noise Suppression Products/EMI Suppression Filters
!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification
before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.
• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.
Chip Inductor Type
Chip Ferrite Bead BLM18_SH Series
Part Number Impedance (ohm)
(at 100MHz, Under Standard
Testing Condition)
Impedance
(ohm)
Typical
DC Resistance
(ohm max.)
Initial Values
DC Resistance
(ohm max.)
Values After Testing
BLM18PG300SH1 20 min. 30
Rated
Current
(mA) (∗1)
1000 0.05 0.10
Remark
For DC power line
BLM18PG330SH1 33±25% 33 3000 0.025 0.050 For DC power line
BLM18PG600SH1 40 min. 60 500 0.1 0.2 For DC power line
BLM18PG121SH1 120±25% 120 2000 0.050 0.100 For DC power line
BLM18PG181SH1 180±25% 180 1500 0.090 0.180 For DC power line
BLM18AG121SH1 120±25% 120 200 0.2 0.3 For general use
BLM18AG151SH1 150±25% 150 200 0.25 0.35 For general use
BLM18AG221SH1 220±25% 220 200 0.3 0.4 For general use
BLM18AG331SH1 330±25% 330 200 0.45 0.55 For general use
BLM18AG471SH1 470±25% 470 200 0.5 0.6 For general use
BLM18AG601SH1 600±25% 600 200 0.5 0.6 For general use
BLM18AG102SH1 1000±25% 1000 100 0.7 0.8 For general use
BLM18BB050SH1 5±25% 5 700 0.1 0.2 For high speed signal line
BLM18BA050SH1 5±25% 5 500 0.2 0.3 For high speed signal line
BLM18BB100SH1 10±25% 10 500 0.15 0.25 For high speed signal line
BLM18BA100SH1 10±25% 10 500 0.25 0.35 For high speed signal line
BLM18BB220SH1 22±25% 22 500 0.25 0.35 For high speed signal line
BLM18BA220SH1 22±25% 22 500 0.35 0.45 For high speed signal line
BLM18BB470SH1 47±25% 47 500 0.3 0.4 For high speed signal line
BLM18BA470SH1 47±25% 47 300 0.55 0.65 For high speed signal line
BLM18BB600SH1 60±25% 60 200 0.35 0.45 For high speed signal line
BLM18BA750SH1 75±25% 75 300 0.70 0.80 For high speed signal line
BLM18BB750SH1 75±25% 75 200 0.35 0.45 For high speed signal line
BLM18BB121SH1 120±25% 120 200 0.5 0.6 For high speed signal line
BLM18BD121SH1 120±25% 120 200 0.4 0.5 For high speed signal line
BLM18BA121SH1 120±25% 120 200 0.9 1.0 For high speed signal line
BLM18BB141SH1 140±25% 140 200 0.55 0.65 For high speed signal line
BLM18BB151SH1 150±25% 150 200 0.55 0.65 For high speed signal line
BLM18BD151SH1 150±25% 150 200 0.4 0.5 For high speed signal line
BLM18BB221SH1 220±25% 220 200 0.65 0.75 For high speed signal line
BLM18BD221SH1 220±25% 220 200 0.45 0.55 For high speed signal line
BLM18BB331SH1 330±25% 330 200 0.75 0.85 For high speed signal line
BLM18BD331SH1 330±25% 330 200 0.5 0.6 For high speed signal line
BLM18BD421SH1 420±25% 420 200 0.55 0.65 For high speed signal line
BLM18BB471SH1 470±25% 470 50 1.0 1.1 For high speed signal line
BLM18BD471SH1 470±25% 470 200 0.55 0.65 For high speed signal line
BLM18BD601SH1 600±25% 600 200 0.65 0.75 For high speed signal line
BLM18BD102SH1 1000±25% 1000 100 0.85 0.95 For high speed signal line
BLM18BD152SH1 1500±25% 1500 50 1.2 1.3 For high speed signal line
BLM18BD182SH1 1800±25% 1800 50 1.5 1.6 For high speed signal line
Continued on the following page.
0.4±0.2
1.6±0.15
0.8±0.15
0.8±0.15
(in mm)