BLM18BB121SH1C - Murata Manufacturing Co., Ltd.

Noise Suppression Products/EMI Suppression Filters

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

Chip Inductor Type

Chip Ferrite Bead BLM18_SH Series

Part Number Impedance (ohm)

(at 100MHz, Under Standard

Testing Condition)

Impedance

(ohm)

Typical

DC Resistance

(ohm max.)

Initial Values

DC Resistance

(ohm max.)

Values After Testing

BLM18PG300SH1 20 min. 30

Rated

Current

(mA) (∗1)

1000 0.05 0.10

Remark

For DC power line

BLM18PG330SH1 33±25% 33 3000 0.025 0.050 For DC power line

BLM18PG600SH1 40 min. 60 500 0.1 0.2 For DC power line

BLM18PG121SH1 120±25% 120 2000 0.050 0.100 For DC power line

BLM18PG181SH1 180±25% 180 1500 0.090 0.180 For DC power line

BLM18AG121SH1 120±25% 120 200 0.2 0.3 For general use

BLM18AG151SH1 150±25% 150 200 0.25 0.35 For general use

BLM18AG221SH1 220±25% 220 200 0.3 0.4 For general use

BLM18AG331SH1 330±25% 330 200 0.45 0.55 For general use

BLM18AG471SH1 470±25% 470 200 0.5 0.6 For general use

BLM18AG601SH1 600±25% 600 200 0.5 0.6 For general use

BLM18AG102SH1 1000±25% 1000 100 0.7 0.8 For general use

BLM18BB050SH1 5±25% 5 700 0.1 0.2 For high speed signal line

BLM18BA050SH1 5±25% 5 500 0.2 0.3 For high speed signal line

BLM18BB100SH1 10±25% 10 500 0.15 0.25 For high speed signal line

BLM18BA100SH1 10±25% 10 500 0.25 0.35 For high speed signal line

BLM18BB220SH1 22±25% 22 500 0.25 0.35 For high speed signal line

BLM18BA220SH1 22±25% 22 500 0.35 0.45 For high speed signal line

BLM18BB470SH1 47±25% 47 500 0.3 0.4 For high speed signal line

BLM18BA470SH1 47±25% 47 300 0.55 0.65 For high speed signal line

BLM18BB600SH1 60±25% 60 200 0.35 0.45 For high speed signal line

BLM18BA750SH1 75±25% 75 300 0.70 0.80 For high speed signal line

BLM18BB750SH1 75±25% 75 200 0.35 0.45 For high speed signal line

BLM18BB121SH1 120±25% 120 200 0.5 0.6 For high speed signal line

BLM18BD121SH1 120±25% 120 200 0.4 0.5 For high speed signal line

BLM18BA121SH1 120±25% 120 200 0.9 1.0 For high speed signal line

BLM18BB141SH1 140±25% 140 200 0.55 0.65 For high speed signal line

BLM18BB151SH1 150±25% 150 200 0.55 0.65 For high speed signal line

BLM18BD151SH1 150±25% 150 200 0.4 0.5 For high speed signal line

BLM18BB221SH1 220±25% 220 200 0.65 0.75 For high speed signal line

BLM18BD221SH1 220±25% 220 200 0.45 0.55 For high speed signal line

BLM18BB331SH1 330±25% 330 200 0.75 0.85 For high speed signal line

BLM18BD331SH1 330±25% 330 200 0.5 0.6 For high speed signal line

BLM18BD421SH1 420±25% 420 200 0.55 0.65 For high speed signal line

BLM18BB471SH1 470±25% 470 50 1.0 1.1 For high speed signal line

BLM18BD471SH1 470±25% 470 200 0.55 0.65 For high speed signal line

BLM18BD601SH1 600±25% 600 200 0.65 0.75 For high speed signal line

BLM18BD102SH1 1000±25% 1000 100 0.85 0.95 For high speed signal line

BLM18BD152SH1 1500±25% 1500 50 1.2 1.3 For high speed signal line

BLM18BD182SH1 1800±25% 1800 50 1.5 1.6 For high speed signal line

Continued on the following page.

0.4±0.2

1.6±0.15

0.8±0.15

(in mm)

Noise Suppression Products/EMI Suppression Filters

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

Continued from the preceding page.

Part Number Impedance (ohm)

(at 100MHz, Under Standard

Testing Condition)

Impedance

(ohm)

Typical

DC Resistance

(ohm max.)

Initial Values

DC Resistance

(ohm max.)

Values After Testing

Rated

Current

(mA) (∗1) Remark

BLM18BD222SH1 2200±25% 2200 50 1.5 1.6 For high speed signal line

BLM18BD252SH1 2500±25% 2500 50 1.5 1.6 For high speed signal line

Operating Temperature : -55 to +125°C

Storage Temperature : -55 to +125°C

(∗1) As for BLM18PG type, Rated Current is derated as right figure depending on the operating temperature.

■ Standard Testing Conditions

Temperature : Ordinary Temp. (15 to 35 °C )

Humidity : Ordinary Humidity (25 to 85% (RH))

Temperature : 20±2 °C

Humidity : 60 to 70% (RH)

Atmospheric pressure : 86 to 106kPa

Operating Temperature (˚C)

3A

2A

1.5A

3

2

1

85 125

1.5

0

Rated Current (A)

■ Specifications

No. Item Specifications Test Methods

1. Electrical Performance

1Impedance Meet rating table above

Impedance frequency

Characteristics(Typical) : see the appendix.

Measuring Equipment : Agilent 4291A or the equivalent

Measuring Frequency : 100±1MHz

Test Fixture : Agilent 16092A or the equivalent

(for BLM18BApppSH1p type : Agilent 16192A

or the equivalent)

2 DC Resistance Meet rating table above. Measuring Equipment : Digital multi meter

It should be soldered on the substrate.

Applying Force (F) : 6.8N

Applying Time : 5±1s

No. Item Specifications Test Methods

2. Mechanical Performance

1Appearance and

Dimensions Meet dimensions. Visual Inspection and measured with Silde Calipers.

4Bonding Strength

It should be soldered on the substrate.

Subatrate:100 x 40 x 1.6mm

Deflection (n) : 1.0mm (Glass-epoxy substrate)

Speed of Applying Force : 0.5mm/s

Keeping Time : 30s

5Bending Strength

3

Pre-Heating : 150±5°C, 60±5s

Solder : Sn/Pb=60/40

Solder Temperature : 270±5°C

Immersion Time : 10±0.5s

Immersion and emersion rates : 25mm/s

Then measured after exposure in the room condition for

48±4hrs..

Resistance to Soldering

Heat

Substrate

45mm

R340

F

Deflection

45mm Product

Pressure jig

Meet Table 1.

Continued on the following page.

The electrodes should be at least 95% covered with

new solder coating.

2

Flux : Ethanol solution of rosin, 25 (wt) %

Pre-Heating : 150±5°C, 60±5s

Solder : Sn/Pb=60/40

Solder Temperature : 230±5°C

Immersion Time : 4±1s

Immersion and emersion rates : 25mm/s

Solderability

R0.5

F

(Side view)

Noise Suppression Products/EMI Suppression Filters

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

Continued from the preceding page.

No. Item Specifications Test Methods

Meet Table 1.

No. Item Specifications Test Methods

3. Environmental Performance

It shall be soldered on the substrate.

4Temperature Cycle

Meet Table 1.

1 cycle:

1 step : -55°C (+0°C, -3°C) / 30±3min

2 step : Room Temperature / within 5min.

3 step : +125°C (+3°C, -0°C) / 30±3min

4 step : Room Temperature / within 5min.

Total of 1000 cycles

Then measured after exposure in the room condition for

48±4hrs..

1Humidity

Temperature : 70±2°C

Humidity : 90 to 95% (RH)

Time : 1000hrs. (+48hrs., -0hr.)

Then measured after exposure in the room condition for

48±4hrs..

2Heat Life

Temperature : 125±3°C

(for BLM18PG330SH1/121SH1/181SH1 : +85±2°C)

Applying Current : Rated Current

Time : 1000hrs. (+48hrs., -0hr.)

Then measured after exposure in the room condition for

48±4hrs..

3Cold Resistance

Temperature : -55±2°C

Time : 1000hrs. (+48hrs., -0hr.)

Then measured after exposure in the room condition for

48±4hrs..

It should be soldered on the substrate.

Oscillation Frequency : 10 to 2000 to 10Hz for 20 min.

Total Amplitude : 1.5mm or Acceleration amplitude 49 m/s2

whichever is smaller.

Testing Time : A period of 2 hours in each of 3 mutually

perpendicular directions. (Total 6 hrs.)

6Vibration

Table 1

Appearance No damaged

DC Resistance Meet rating table above.

Impedance Change within±30%

Noise Suppression Products/EMI Suppression Filters

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

Chip Capacitor

Chip 3-terminal Capacitor NFM21H Series

Part Number Rated Voltage Withstanding Voltage Rated Current DC Resistance (Rdc1,2)Capacitance

NFM21HC220U1H3 22pF±20% 50V (DC) 150V (DC) 300mA (DC) 0.3 ohm max.

50V (DC) 150V (DC) 300mA (DC) 0.3 ohm max.

50V (DC) 150V (DC) 2A (DC) 0.03 ohm max.

NFM21HC470U1H3 47pF±20%

NFM21HC101U1H3 100pF±20%

NFM21HC221R1H3 220pF±20%

NFM21HC471R1H3 470pF±20%

NFM21HC102R1H3 1000pF±20%

NFM21HC222R1H3 2200pF±20%

NFM21HC223R1H3 22000pF±20%

Insulation Resistance

1000M ohm min.

Operating Temperature / Storage Temperature : -55 to +125°C

■ Standard Testing Condition

Temperature : Ordinary Temp. / 15 to 35 °C

Humidity : Ordinary Humidity / 25 to 85 % (RH)

Temperature : 20±2 °C

Humidity : 60 to 70 % (RH)

Atmospheric pressure : 86 to 106 kPa

■ Specifications

No. Item Specifications Test Methods

1. Electrical Performance

1Capacitance (Cap.) Meet rating table above.

2Insulation Resistance

(I. R. ) Voltage : Rated Voltage

Charging Time : 2 minutes max.

3Withstanding Voltage Products should not be damaged. Test Voltage : 150V(DC)

Testing Time : 1 to 5 s

Charge/Dis charge Current : 50 mA max.

4DC Resistance (Rdc1,2)

Frequency

22 to 100pF : 1.0±0.1MHz

220 to 22000pF : 1.0±0.1kHz

Voltage : 1±0.2V (rms)

Meet rating table above.

0.3±0.2

(1) (3)

(2)

1.25±0.1

2.0±0.2

0.6±0.2

(in mm)

0.85±0.1

0.25±0.2

Equivalent Circuit

Input(1) Output (3)

(2)

GND * no polarity.

Measured with 100mA max.

Rdc1 : between signal terminals

Rdc2 : between ground terminals

Rdc 2

Rdc 1

Noise Suppression Products/EMI Suppression Filters

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

No. Item Specifications Test Methods

2. Mechanical Performance

1Appearance and

Dimensions Meet dimensions. Visual Inspection and measured with Slide Calipers.

2Solderability Electrodes should be at least 90%

covered with new solder coating.

Flux : Ethanol solution of rosin, 25(wt)%

Pre-heat : 150±5°C, 60±5 s

Solder : Sn / Pb = 60 / 40

Solder Temperature : 230 ± 5°C

Immersion Time : 2±0.5 s

Immersion and emersion rates : 25mm / s

3Resistance to

soldering heat

Flux : Ethanol solution of rosin, 25 (wt)%

Pre-heat : 150±5°C, 60±5s

Solder : Sn / Pb = 60 / 40

Solder Temperature : 270 ± 5°C

Immersion Time : 10 ± 1 s

Immersion and emersion rates : 25mm / s

Then measured after exposure in the room condition f

or following hours.

22 to 100pF : 24±2 hrs.

220 to 22000pF : 48±4 hrs.

Initial values : About 220 to 22000pF, measured after heat

treatment [150°C (+0, -10°C), 1hour] and exposure in the room

condition for 48±4h.

5Bending Strength

It should be soldered on the glass-epoxy substrate (t = 1.0mm).

Deflection : 2 mm

Keeping Time : 30 s

4Bonding Strength

It should be soldered on the glass-epoxy substrate.

Applying Force (F) : 17.6 N

Applying Time : 60 s

45

R230

F

Deflection

45 Product

Pressure jig

Meet Table 1.

Table 1

Appearance No damaged

Cap. Change within ± 7.5%

I. R.

Rdc 1, 2

meet rating table above

0.5Ω max.22 to 2200pF 0.05Ω max.22000pF

The electrodes should be no failure after tested.

Meet Table 2.

Table 2

Appearance No damaged

Cap. Change within ± 12.5%

Rdc 1, 2 0.5Ω max.22 to 2200pF 0.05Ω max.22000pF

6Vibration

It should be soldered on the glass-epoxy substrate.

Oscillation Frequency : 10 to 55 to 10Hz for 1 min

Total Amplitude : 1.5 mm or Acceleration anplitude 49m/s2

whichever is smaller.

Testing Time : A period of 2 hrs. in each of 3 mutually

perpendicular directions. (Total 6 hrs.)

Initial values : About 220 to 22000pF, measured after heat

treatment [150°C (+0, -10°C), 1hour] and exposure in the room

condition for 48±4h.

Meet Table 3.

Table 3

Appearance No damaged

Capacitance meet rating table above

Rdc 1, 2 0.5Ω max.22 to 2200pF 0.05Ω max.22000pF

(in mm)

0.6

1.0

0.6 0.6

Noise Suppression Products/EMI Suppression Filters

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

1 Cycle

1 step : -55 ±0

3 °C / 30 ±3 minutes

2 step : Room Temperature / within 5 min.

3 step : -125 ±3

0 °C / 30 ±3 minutes

4 step : Room Temperature / within 5 min.

Total of 1000 cycles

Then measured after exposure in the room

condition for following hours.

22 to 100pF : 24±2 hrs.

220 to 22000pF : 48±4 hrs.

Initial values : About 220 to 22000pF, measured after heat

treatment [150°C (+0, -10°C), 1hour] and exposure in the room

condition for 48±4h.

4Temperature Cycling

Meet Table 5.

Table 5

Appearance No damaged

Cap. Change within ± 7.5%

I. R.

Rdc 1, 2

meet rating table above

0.5Ω max.22 to 2200pF 0.05Ω max.22000pF

Meet Table 4.

Table 4

Appearance No damaged

Cap. Change within ± 12.5%

I. R.

Rdc 1, 2

meet rating table above

0.5Ω max.22 to 2200pF 0.05Ω max.22000pF

No. Item Specifications Test Methods

3. Environment Performance (It should be soldered on the glass-epoxy substrate.)

1 Humidity

Temperature : 70 ± 2 °C

Humidity : 90 to 95%(RH)

Time : 1000 hrs. (+48hrs., -0 hr.)

Then measured after exposure in the room

condition for following hours.

22 to 100pF : 24±2 hrs.

220 to 22000pF : 48±4 hrs.

2 Heat Life

Temperature : 125 ± 3 °C

Test Voltage : Rated Voltage x 200%

Applying Current : 50 mA max.

Time : 1000 hrs. (+48hrs., -0hr.)

Then measured after exposure in the room

condition for following hours.

22 to100pF : 24±2 hrs.

220 to 22000pF : 48±4 hrs.

Initial values : About 220 to 22000pF, measured after heat

treatment [150°C (+0, -10°C), 1hour] and exposure in the room

condition for 48±4h.

3 Cold Resistance

Temperature : -55 ± 2 °C

Time : 1000 hrs. (+48hrs., -0hr.)

Then measured after exposure in the room

condition for following hours.

22 to 100pF : 24±2 hrs.

220 to 22000pF : 48±4 hrs.

Noise Suppression Products/EMI Suppression Filters

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

Chip LC Combined

T-type Chip EMIFILr NFE61H Series

Part Number Rated Voltage Withstanding Voltage Rated Current Insulation ResistanceCapacitance

NFE61HT330U2A9 33pF±30% 100V (DC) 250V (DC) 2A (DC) 1000Mohm min.

100V (DC) 250V (DC) 2A (DC) 1000Mohm min.

NFE61HT680R2A9 68pF±30%

NFE61HT101Z2A9 100pF±30%

NFE61HT181C2A9 180pF±30%

NFE61HT361C2A9 360pF±20%

NFE61HT681D2A9 680pF±30%

NFE61HT102F2A9 1000pF +80, -20%

NFE61HT332Z2A9 3300pF +80, -20%

Operating Temperature : -55 to +125 °C

Storage Temperature : -55 to +125 °C

■ Standard Testing Condition

Temperature : Ordinary Temp. 15 to 35°C

Humidity : Ordinary Humidity 25 to 85% (RH)

Temperature : 20±2°C

Humidity : 60 to 70% (RH)

Atmospheric pressure : 86 to 106kPa

■ Specifications

No. Item Specifications Test Methods

1. Electrical Performance

1Capacitance Meet rating table above

2Insulation Resistance

(I. R. ) Meet rating table above Voltage : 100 V (DC)

Charging Time : 60±5s

3Withstanding Voltage Products should not be damaged. Test Voltage : 250 V (DC)

Testing Time : 1 to 5 s

Charge/Discharge current : 10mA max.

4Resistance to

Surge Voltage

Attenuating transient voltage of exponential function should be

applied to products on the condition.

Peak Voltage : 400 V

Force Period : 1 s

The number of Surges : 105

Table 1 Capacitance Voltage

180, 360, 680, 1000, 3300 (pF) 1±0.2 V (rms)

33,68,100 (pF) 1 to 5 V (rms) Frequency

1kHz±10%

1MHz±10%

Relay 10 ohm

Filter

100 ohm

0.47µF

EB

1

23

EB 400V

Meet Table 2.

Table 2

Appearance No damaged

I. R. Meet rating table above.

Withstanding

Voltage No damaged

Cap. Change within±15%

within±30%

33, 68, 100, 180,

360, 680 (pF)

1000, 3300 (pF)

2.6±0.3

6.8

0.7±0.20.7±0.2

1.6±0.3

(in mm)

+0.3

-0.5

(1) (2) (3)

Equivalent Circuit

Input Output

GND

No polarity.

(1) (3)

(2)

Noise Suppression Products/EMI Suppression Filters

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

No. Item Specifications Test Methods

2. Mechanical Performance

1Appearance and

Dimensions Meet dimensions. Visual Inspection and measured with Slide Calipers

2Solderability The electrodes should be at least 75% covered with

new solder coating.

Flux : Ethanol solution of rosin,25 (wt)%

Pre-heat : 150±5 °C, 60±5 s

Solder : Sn/Pb = 60/40

Solder Temperature : 230±5 °C

Immersion Time : 4±1 s

Immersion and emersion rates : 25mm / s

3Resistance to

soldering heat

Flux : Ethanol solution of rosin,25 (wt)%

Pre-heat : 150±5 °C, 60±5 s

Solder : Sn/Pb = 60/40

Solder Temperature : 270±5 °C

(for NFE61HT332Z2A9p : 250±5°C)

Immersion Time : 10±1 s

Immersion and emersion rates : 25 mm/s.

5Vibration

Oscillation Frequency : 10 to 2000 to 10Hz for 20 min

Total Amplitude : 1.5 mm or Acceleration amplitude 49m/s2

whichever is smaller

Testing Time : A period of 2 hours on each of 3 mutually

perpendicular directions (Total 6 hrs.)

4Bending Strength

It should be soldered on the Paper-phenol substrate. (t=1.6mm)

Deflection : 3 mm

Keeping Time : 30 s

45

R340

F

Deflection

45 Product

Pressure jig

Meet Table 3.

Table 3

Appearance No damaged

Cap. Change within±15%

within±30%

33, 68, 100, 180,

360, 680 (pF)

1000, 3300 (pF) (in mm)

No. Item Specifications Test Methods

3. Environment Performance (It should be soldered on the substrate.)

1 Humidity

Temperature : 85±2 °C

Humidity : 85 % (RH)

Time : 1000 hrs. (+48 hrs. , -0 hr.)

Then measured after exposure in the room condition for 4 to

48 hrs..

2 Heat Life

Temperature : 125±2 °C

Test Voltage :

33,68,100,180,360,680 (pF) : Rated Voltage x 200%

1000,3300 (pF) : Rated Voltage x 150%

Time : 1000 hrs. (+48hrs. , -0hr.)

Then measured after exposure in the room condition for 4 to

48 hrs..

3 Cold Resistance Temperature : -55±2 °C

Time : 500 hrs. (+24hrs., -0hr.)

4 Temperature Cycling

1 Cycle

1step : -55°C (+0°C, -3°C) / 30±3 min.

2step : Room Temperature / within 5 min.

3step : +125°C (+3°C, -0°C) / 30±3 min.

4step : Room Temperature / within 5 min.

Total of 500 cycles

Then measured after exposure in the room condition for 4 to

48 hrs..

Meet Table 4.

Table 4

Appearance No damaged

I. R. 100 MΩ min.

Withstanding

Voltage No damaged

Cap. Change within±15%

within±30%

33, 68, 100, 180,

360, 680 (pF)

1000, 4700 (pF)

Meet Table 2

Noise Suppression Products/EMI Suppression Filters

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

Chip Common Mode Choke Coils Winding Type

Wire Wonud DLW31SH Series

Part Number Common Mode Impedance

(at 100MHz, Under Standard Testing Condition) Rated

Voltage V (DC) Withstanding

Voltage V (DC) Rated

Current (mA) DC

Resistance

DLW31SH222SQ2 2200 ohm±25% 32 80 80 1.6 ohm±20% 10

Operating Temperature : -40 to +125°C Storage Temperature : -40 to +125°C

Notice (Handling)

■ Standard Testing Condition

■ Specifications

Temperature : Ordinary Temperature 15 to 35°C

Humidity : Ordinary Humidity 25 to 85% (RH)

Temperature : 20±2°C

Humidity : 60 to 70% (RH)

Atmospheric Pressure : 86 to 106kPa

Insulation

Resistance

(Mohm min.)

Equivalent Circuit

(1) (2)

(4) (3)

No polarity

3.2±0.2

(0.6)(0.6)

1.9±0.2

1.6±0.2

(0.6) (0.6)

(1) (2)

(3)(4)

in mm

No. Item Specifications Test Methods

1. Electrical Performance

1Common Mode

Impedance (Zc) Meet rating table above

Measuring Equipment : HP4291A or the equivalent

Measuring Frequency :100±1MHz

Test Fixture : Agilent 16092A or equivalent

3 Withstanding Voltage Products should not be damaged. Test Voltage : 2.5 times for Rated Voltage

Tsting Time : 1 to 5 s

Charge/Dis charge Current : 1 mA max.

4 DC Resistance (Rdc) Meet rating table above Measuring current : 10mA max.

(In case of doubt in the above mentioned standard condition,

measure by 4 terminal methods.)

2Insulation

Resistance (I.R.) Measuring voltage : Rated Voltage

Charging time : 1 minute max.

Do not make any resin coating.

Resin coating may cause;

• a change in impedance value

• open circuit of wire

Noise Suppression Products/EMI Suppression Filters

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

5 Bending Strength

It should be soldered on the Glass-epoxy substrate (t=1.0mm).

Deflection (n) : 2.0mm

Keeping time : 5 s

Speed of Applying Force : 0.5mm/s

6 Vibration

It should be soldered on the substrate.

Oscillation Frequency : 10 to 2000 to 10Hz for 20 min

Total Amplitude 1.5mm or Acceleration amplitude 49m/s2

whichever is smaller.

Testing Time : A period of 2 hrs. in each of 3 mutually

perpendicular directions. (Total 6 hrs.)

3Resistance to

Soldering Heat Meet Table 1.

Flux : Ethanol solution of rosin,25(wt)% includes activator

equipment to 0.06 to 0.10(wt)% chlorine

Pre-Heating : 150±5°C, 60±5s

Solder: Sn/Pb=60/40

Solder Temperature : 260±5°C

Immersion Time : 10±1s

Immersion and emersion rates : 25mm / s

Then measured after exposure in the room condition for 4 to

48 hrs..

45

R230

F

Deflection

45 Product (in mm)

Pressure jig

Meet Table 1.

No. Item Specifications Test Methods

3. Environmental Performance (Products shall be soldered on the substrate.)

Meet Table 1.

1Humidity

Temperature : 85±2°C

Humidity : 85%(RH)

Time : 1000hrs. (+48 hrs., -0 hr.)

Then measured after exposure in the room condition for 4 to

48 hrs..

2 Heat Life

Temperature : 125±2°C

Applying Voltage : Rated Current

Time : 1000hrs. (+48 hrs., -0 hr.)

Then measured after exposure in the room condition for 4 to

48 hrs..

3 Cold Resistance

Temperature : -40± 2°C

Time : 1000hrs. (+48 hrs., -0 hr.)

Then measured after exposure in the room condition for 4 to

48 hrs..

4 Bonding Strength No evidence of coming off substrate.

Products should not be mechanical damaged.

It should be soldered on the substrate.

Applying Force(F) : 10N

Applying Time : 5±1 s

Pressure

Product

Test board fixture

Substrate

Continued on the following page.

No. Item Specifications Test Methods

2. Mechanical Performance

1Appearance

and Dimensions Meet dimensions. Visual Inspection and measured with Slide Calipers

2Solderability The electrodes should be at least 90% covered with

new solder coating.

The electrodes should be at least 90% covered with new solder

coating.

Flux : Ethanol solution of rosin,25 (wt) % includes activator

equivalent to 0.06 to 0.10 (wt) % chlorine

Pre-Heating : 150±5°C, 60±5s

Solder : Sn/Pb=60/40

Solder Temperature : 230±5°C

Immersion Time : 3±0.5 s

Immersion and emersion rates : 25mm / s

Please hold product

expect these part.

Stainless tweezers

Noise Suppression Products/EMI Suppression Filters

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

No. Item Terminal to be Tested

4. Test Terminal (When measuring and supplying the voltage,the following terminal is applied.)

1Common Mode Impedance (Measurement Terminal)

2Withstanding Voltage (Measurement Terminal)

3DC Resistance (Measurement Terminal)

4Insulation Resistance (Measurement Terminal)

5Heat Life (Supply Terminal)

Terminal Terminal

Terminal

Terminal Terminal

Terminal

■ Measuring Method for Common Mode Impedance

Measured common mode impedance may be included

measurement error due to stray capacitance, residual

inductance of test fixture.

To correct this error, the common mode impedance should

be calculate as follows;

(1) Measure admittance of the fixture (opened), Go Bo.

(2) Measure impedance of the fixture (shorted), Rs Xs.

(3) Measure admittance of the specimen, Gm Bm.

(4) Calculate corrected impedance |Z| using the formula

below.

|Z| = (Rx2+Xx2) 1/2

Where

Rx = Gm - Go - Rs

(Gm-Go)2 + (Bm-Bo)2

Xx = -(Bm - Bo) - Xs

(Gm-Go)2 + (Bm-Bo)2

Continued from the preceding page.

4Temperature Cycle Meet Table 1.

1 Cycle

Step 1 -40°C (+0°C, -3°C) / 30±3 min

Step 2 Room Temperature / within 5 min.

Step 3 +125°C (+3°C, -0°C) / 30±3 min

Step 4 Room Temperature / within 5 min.

Total of 1000 cycles

Then measured after exposure in the room condition for 4 to

48 hrs..

No. Item Specifications Test Methods

Table 1

Appearance No damaged

Common Mode

Impedance Change

Withstanding Voltage

within±20%

No damaged

Insulation Resistance 10MΩ min.

Noise Suppression Products/(EMIFILr)

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

Ferrite Cores for EMI Suppression

Plate Cores

A

B

H

Part Number A: Outer Dimension

(mm) B: Width Dimension

(mm) H: Thickness Dimension

(mm)

FSSA100008RN000T 10.0 10.0 0.8

FSSA100010RN000T 10.0 10.0 1.0

FSSA190010RN000T 19.0 6.0 1.0

FSSA100Z55RN000T 10.0 10.0 0.55

FSSA202010RN000T 20.0 16.5 1.0

FSSA202015RN000T 20.0 16.5 1.5

FSSA203005RN000T 20.0 20.0 0.5

FSSA203010RN000T 20.0 20.0 1.0

FSSA222011RT000T 22.8 16.5 1.1

FSSA230008RN000T 23.0 23.0 0.8

FSSA230010RN000T 23.0 23.0 1.0

FSSA230015RN000T 23.0 23.0 1.5

FSSA270010RN000T 27.0 20.0 1.0

FSSA271010RN000T 27.0 27.0 1.0

FSSA271020RN000T 27.0 27.0 2.0

FSSA271050RN000T 27.0 27.0 5.0

FSSA300010RN000T 30.0 30.0 1.0

FSSA450015RT000T 45.0 10.0 1.5

FSSA530015RT000T 52.8 28.5 1.5

FSSA600020RN000T 60.5 30.6 2.0

Noise Suppression Products/(EMIFILr)

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

Ferrite Cores for EMI Suppression

Ring Core

B

A

H

Part Number Phi A: Outer Dimension

(mm) Phi B: Inner Dimension

(mm) H: Length Dimension

(mm) Impedance at 100MHz (3 turns)

(ohm)

FSRB060040RNB00B 5.5 2.7 4.0 290

FSRB071040RNB00B 7.0 4.0 4.0 222

FSRB090060RNB00B 9.0 5.0 6.0 356

FSRB090080RNB00B 9.0 5.0 8.0 466

FSRB091060RNB00B 9.0 4.3 6.0 451

FSRB091080RNB00B 9.0 4.3 8.0 582

FSRB100030RTB00B 10.0 6.0 3.0 170

FSRB100060RTB00B 10.0 6.0 6.0 316

FSRB100080RTB00B 10.0 6.0 8.0 388

FSRB100100RTB00B 10.0 6.0 10.0 475

FSRB120050RTB00T 12.0 7.0 5.0 264

FSRB120060RTB00T 12.0 7.0 6.0 310

FSRB120080RTB00T 12.0 7.0 8.0 400

FSRB120100RTB00T 12.0 7.0 10.0 450

FSRB121060RTB00T 12.0 5.6 6.0 406

FSRB121080RTB00T 12.0 5.6 8.0 490

FSRB121100RTB00T 12.0 5.6 10.0 535

FSRB140080RNB00T 14.0 10.0 8.0 340

FSRB140140RNB00T 14.0 10.0 14.0 450

FSRB142060RXB00T 14.0 8.0 6.0 325

FSRB142080RXB00T 14.0 8.0 8.0 415

FSRB142100RXB00T 14.0 8.0 10.0 492

FSRB143140RNB00T 14.0 11.0 14.0 364

FSRB160G75RN000T 16.0 12.0 7.75 247

FSRB162030RNB00T 16.3 8.3 3.0 230

FSRB162050RN000T 16.3 8.3 5.0 310

FSRB162100RNB00T 16.3 8.3 10.0 557

FSRB162160RN000T 16.3 8.3 16.0 640

FSRB190060RTB00T 19.0 10.0 6.0 360

FSRB190100RT000T 19.0 10.0 10.0 480

FSRB190180RT000T 19.0 10.0 18.0 619

FSRB221080RNB00T 22.0 14.0 8.0 360

FSRB250120RT000T 25.0 15.0 12.0 470

FSRB300080RT000T 30.0 20.0 8.0 300

Noise Suppression Products/(EMIFILr)

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

Ferrite Cores for EMI Suppression

Beads Core

BH

A

Part Number Phi A: Outer Dimension

(mm) Phi B: Inner Dimension

(mm) H: Length Dimension

(mm) Impedance at 100MHz (1 turn)

(ohm)

FSRH021049RNB00B 1.95 1.02 4.9 34

FSRH030060RNB00B 3.36 1.1 6.0 74

FSRH041D85RNB00B 3.6 1.0 4.85 66

FSRH044050RNB00B 3.6 1.5 5.0 53

FSRH050050RN000B 4.7 1.4 5.0 64

FSRH050100RN000B 4.7 1.4 10.0 120

FSRH060080RN000B 5.5 2.7 8.0 64

FSRH070080RN000B 7.0 4.0 8.0 59

FSRH070140RN000B 7.0 4.0 14.0 82

FSRH090100RN000B 9.0 5.0 10.0 72

FSRH090160RN000B 9.0 5.0 16.0 100

FSRH090200RN000T 9.0 5.0 20.0 135

FSRH091100RN000B 9.0 4.3 10.0 94

FSRH091160RN000T 9.0 4.3 16.0 145

FSRH100150RTB00T 10.0 6.0 15.0 92

FSRH120150RT000T 12.0 7.0 15.0 90

FSRH120200RT000T 12.0 7.0 20.0 120

FSRH120285RT000T 12.0 7.0 28.5 175

FSRH121150RT000T 12.0 5.6 15.0 130

FSRH121200RT000T 12.0 5.6 20.0 170

FSRH121250RT000T 12.0 5.6 25.0 223

FSRH142150RX000T 14.0 8.0 15.0 97

FSRH142200RX000T 14.0 8.0 20.0 127

FSRH142280RX000T 14.0 8.0 28.0 170

FSRH162200RN000T 16.3 8.3 20.0 162

FSRH162280RN000T 16.3 8.3 28.0 225

FSRH190285RT000T 19.0 10.0 28.5 200

Noise Suppression Products/(EMIFILr)

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

Ferrite Cores for EMI Suppression

Flat Cables

o Thin Type

C

B

A

OC-C

E dim. < 4mm

E

H

Part Number A: Outer

Dimension

(mm)

B: Inner

Dimension

(mm)

H: Length

Dimension

(mm)

E: Width

Dimension

(mm)

C: Gap

Dimension

(mm)

Impedance

at 100MHz

(ohm)

Number

of Turn

FSRC080030RTB00B 8.0 6.0 3.0 2.7 0.7 28 1

FSRC080060RTB00B 8.0 6.0 6.0 2.7 0.7 39 1

FSRC080090RTB00B 8.0 6.0 9.0 2.7 0.7 51 1

FSRC080120RTB00B 8.0 6.0 12.0 2.7 0.7 63 1

FSRC100030RTB00B 10.0 8.0 3.0 1.75 0.7 25 1

FSRC100060RTB00B 10.0 8.0 6.0 1.75 0.7 30 1

FSRC120020RXB00B 11.5 8.0 2.0 3.0 0.7 24 1

FSRC120050RXB00B 11.5 8.0 5.0 3.0 0.7 35 1

FSRC120060RXB00B 11.5 8.0 6.0 3.0 0.7 36 1

FSRC120090RXB00B 11.5 8.0 9.0 3.0 0.7 48 1

FSRC120120RXB00B 11.5 8.0 12.0 3.0 0.7 59 1

FSRC150030RTB00B 15.6 13.6 3.0 1.85 0.7 25 1

FSRC150060RTB00B 15.6 13.6 6.0 1.85 0.7 30 1

FSRC160040RTB00T 15.6 13.6 4.0 2.8 0.7 26 1

FSRC171030RTB00T 17.0 13.6 3.0 2.8 0.7 26 1

FSRC171060RTB00T 17.0 13.6 6.0 2.8 0.7 37 1

FSRC171090RTB00T 17.0 13.6 9.0 2.8 0.7 44 1

FSRC171120RTB00T 17.0 13.6 12.0 2.8 0.7 53 1

FSRC221150RTF10T 22.8 18.8 15.0 2.8 0.55 73 1

FSRC222060RX000T 22.8 18.7 6.0 2.8 0.7 37 1

FSRC222090RX000T 22.8 18.7 9.0 2.8 0.7 46 1

FSRC222120RX000T 22.8 18.7 12.0 2.8 0.7 53 1

FSRC230060RTB00T 22.7 20.6 6.0 1.75 0.6 33 1

FSRC230090RTB00T 22.7 20.6 9.0 1.75 0.6 39 1

FSRC253060RT000T 25.0 21.0 6.0 3.0 0.8 41 1

FSRC253090RT000T 25.0 21.0 9.0 3.0 0.8 48 1

FSRC253120RT000T 25.0 21.0 12.0 3.0 0.8 56 1

FSRC280060RX000T 28.0 24.0 6.0 3.5 0.8 39 1

FSRC280090RX000T 28.0 24.0 9.0 3.5 0.8 46 1

FSRC280120RX000T 28.0 24.0 12.0 3.5 0.8 56 1

FSRC360060RX000T 36.0 32.0 6.0 3.5 0.8 40 1

FSRC360090RX000T 36.0 32.0 9.0 3.5 0.8 47 1

FSRC360120RX000T 36.0 32.0 12.0 3.5 0.8 56 1

FSRC420060RX000T 42.0 38.0 6.0 2.8 0.7 42 1

FSRC420090RX000T 42.0 38.0 9.0 2.8 0.7 48 1

FSRC420120RX000T 42.0 38.0 12.0 2.8 0.7 57 1

Noise Suppression Products/(EMIFILr)

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

o Standard Type

C

B

A

OC-B

Normal type

E

H

Part Number A: Outer

Dimension

(mm)

B: Inner

Dimension

(mm)

H: Length

Dimension

(mm)

E: Width

Dimension

(mm)

C: Gap

Dimension

(mm)

Impedance

at 100MHz

(ohm)

Number

of Turn

FSRC140030RXB00T 13.8 9.6 3.0 5.0 0.8 30 1

FSRC140040RXB00T 13.8 9.6 4.0 5.0 0.8 36 1

FSRC140060RXB00T 13.8 9.6 6.0 5.0 0.8 44 1

FSRC140090RXB00T 13.8 9.6 9.0 5.0 0.8 66 1

FSRC140120RX000T 13.8 9.6 12.0 5.0 0.8 78 1

FSRC140200RXB00T 13.8 9.6 20.0 5.0 0.8 126 1

FSRC141060RXB00T 13.8 10.8 6.0 5.0 1.3 39 1

FSRC141120RXB00T 13.8 10.8 12.0 5.0 1.3 62 1

FSRC170030RTB00T 17.0 13.0 3.0 5.0 0.8 26 1

FSRC170060RTB00T 17.0 13.0 6.0 5.0 0.8 37 1

FSRC170070RT000T 17.0 13.0 7.0 5.0 0.8 45 1

FSRC170090RTB00T 17.0 13.0 9.0 5.0 0.8 53 1

FSRC170120RT000T 17.0 13.0 12.0 5.0 0.8 75 1

FSRC170200RT000T 17.0 13.0 20.0 5.0 0.8 107 1

FSRC192090RTB00T 18.8 14.6 9.0 5.9 1.6 47 1

FSRC240150RX000T 23.8 18.8 15.0 6.3 1.1 76 1

FSRC250070RT000T 25.0 21.0 7.0 5.0 0.8 45 1

FSRC250120RT000T 25.0 21.0 12.0 5.0 0.8 70 1

FSRC252050RT000T 25.0 21.0 5.0 5.0 1.2 35 1

FSRC252060RT000T 25.0 21.0 6.0 5.0 1.2 39 1

FSRC252090RT000T 25.0 21.0 9.0 5.0 1.2 47 1

FSRC252120RT000T 25.0 21.0 12.0 5.0 1.2 55 1

FSRC260060RT000T 26.0 22.0 6.0 5.0 1.2 38 1

FSRC260090RT000T 26.0 22.0 9.0 5.0 1.2 49 1

FSRC271113RN000T 27.0 22.25 11.3 8.05 2.15 60 1

FSRC310060RN000T 31.0 27.0 6.0 5.0 0.8 47 1

FSRC310090RN000T 31.0 27.0 9.0 5.0 0.8 58 1

FSRC310120RN000T 31.0 27.0 12.0 5.0 0.8 70 1

FSRC310200RN000T 31.0 27.0 20.0 5.0 0.8 102 1

FSRC320080RT000T 32.0 27.8 8.0 6.5 1.3 45 1

FSRC320120RT000T 32.0 27.8 12.0 6.5 1.3 60 1

FSRC400120RTF10T 40.0 35.0 12.0 4.0 0.5 80 1

FSRC401120RT000T 40.0 35.0 12.0 4.5 1.0 65 1

FSRC410150RN000T 41.2 35.0 15.0 7.7 1.5 70 1

FSRC560120RT000T 56.2 52.2 12.0 4.8 0.9 70 1

FSRC580060RT000T 58.0 52.8 6.0 6.7 1.5 46 1

FSRC580120RT000T 58.0 52.8 12.0 6.7 1.5 62 1

FSRC581180RTF00T 58.0 52.8 18.0 6.2 1.0 95 1

FSRC800127RTF30T 80.0 68.6 12.7 10.0 2.6 71 1

FSRC600100RN000T 60.0 48.0 10.0 12.0 1.9 69 1

FSRC600127RN000T 60.0 48.0 12.7 12.0 1.9 72 1

Noise Suppression Products/(EMIFILr)

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

o Wide Type

C

B

A

OC-A

C dim. U 3mm

E

H

Part Number A: Outer

Dimension

(mm)

B: Inner

Dimension

(mm)

H: Length

Dimension

(mm)

E: Width

Dimension

(mm)

C: Gap

Dimension

(mm)

Impedance

at 100MHz

(ohm)

Number

of Turn

FSRC142150RTB00T 14.0 9.0 15.0 9.0 4.0 90 1

FSRC190060RTB00T 19.0 15.0 6.0 7.0 3.5 34 1

FSRC191085RT000T 19.0 13.0 8.5 18.0 12.0 44 1

FSRC321100RN000T 32.0 28.0 10.0 7.5 3.5 35 1

FSRC321150RN000T 32.0 28.0 15.0 7.5 3.5 47 1

FSRC440100RN000T 44.0 40.0 10.0 7.5 3.8 34 1