PT5100 Series 1-A Positive Step-down Integrated Switching Regulator SLTS028B (Revised 11/8/2001) Features * 90%+ Efficiency * Internal Short-Circuit Protection * Pin-Compatible with 3-Terminal Linear Regulators * Laser-Trimmed Output Voltage * Over-Temperature Protection * Small Footprint * Wide Input Range * 5-Pin Mount Option (Suffixes L & M) Description Ordering Information The PT5100 modules are a series of economical, easy-to-use 1-A positive step-down, Integrated Switching Regulators (ISRs). These ISRs are compatible with most TO-220 style linear regulators, and when employed as a linear replacement, provide significant benefits in both efficiency and power dissipation. They are recommended for use in a wide variety of on-board power regulation applications. These include computer, data storage, industrial controls, and battery powered equipment. Modules are laser-trimmed for optimal output voltage accuracy, and exhibit excellent line and load regulation. The PT5100 also features output current limiting and thermal shutdown protection. PT5101 PT5102 PT5103 PT5105 PT5107 PT5109 PT5110 PT5111 PT5112 = +5.0 Volts = +12.0 Volts = +3.3 Volts = +6.5 Volts = +15.0 Volts = +5.6 Volts = +9.0 Volts = +10.0 Volts = +8.0 Volts Package (EAD) PT Series Suffix (PT1234x ) Case/Pin Configuration Order Suffix Vertical Horizontal SMD Horizontal, 2-pin Tab SMD, 2-Pin Tab N A C M L Pin-Out Information Pin Package Code (EAD) (EAA) (EAC) (EAM) (EAL) Function 1 Vin 2 GND 3 Vout (Reference the applicable package code drawing for the dimensions and PC board layout) Standard Application +VIN 1 PT5100 2 C1 C2 1F 100F COM +VOUT 3 + L O A D COM C1 = Optional 1F ceramic capacitor C2 = Required 100F electrolytic For technical support and more information, see inside back cover or visit www.ti.com PT5100 Series 1-A Positive Step-down Integrated Switching Regulator Specifications (Unless otherwise stated, Ta =25C, Vin =Vinmin, C out =100F, and Io =Iomax) Characteristic Symbol Output Current Input Voltage Range Io Vin Set Point Voltage Tolerance Temperature Variation Line Regulation Load Regulation Total Output Voltage Variation Vo tol Regtemp Regline Regload Votot Efficiency Vo Ripple (pk-pk) Transient Response Current Limit Switching Frequency Vr ttr Vtr Ilim s External Output Capacitance Operating Temperature Range Thermal Resistance Cout Ta ja Storage Temperature Reliability Ts MTBF Mechanical Shock -- Mechanical Vibration -- Weight -- Flammability -- Notes: (1) (2) (3) (4) Conditions Min Over Vin range Over Io Range Vo =3.3V Vo =5.0V Vo >5.0V 0 Ta +60C, Io =Iomin Over Vin range Over Io range Includes set-point, line, load, 0 Ta +60C Vo = 15V Vo = 12V Vo = 10V Vo =5.0V Vo =3.3V 20MHz bandwidth 1A/s load step, 50% to 100% Iomax Vo over/undershoot Vo = -1% Over Vin range Vo 5.0V Vo 3.3V Over Vin range Free-air convection (40-60LFM) -- Per Bellcore TR-332 50% stress, Ta =40C, ground benign Per Mil-Std-883D, method 2002.3, 1mS, half-sine, mounted to a fixture Per Mil-Std-883D, Method 2007.2 20-2000Hz, soldered in PC board Suffixes N, A, & C Suffixes L & M Materials meet UL 94V-0 Vo =3.3V Vo =5.0V Vo 12V 0.1 (1) 9 9 Vo + 4 -- -- -- -- PT5100 SERIES Typ Max -- -- -- -- 1 0.5 5 5 1.0 26 38 38 2 -- 10 10 Units A VDC %Vo %Vo mV mV -- 1.5 3 -- -- -- -- -- -- -- -- 1.2 500 575 100 -40 (2) -- -- -- -40 95 94 92 90 82 2 100 5.0 2.6 650 725 -- -- 45 50 60 -- -- -- -- -- -- -- 200 -- -- 800 875 -- +85 (3) -- -- -- +125 %Vo 11.3 -- -- 106 Hrs -- 500 -- G's -- 5 (4) -- G's -- -- 4.5 6.5 -- -- grams % %Vo s %Vo A kHz F C C/W C The ISR will operate at no load with reduced specifications. For operation below 0C, use a tantalum type capacitor for C2. See Thermal Derating curves. The tab pins on the 5-pin mount package types (suffixes L & M) must be soldered. For more information see the applicable package outline drawing. For technical support and more information, see inside back cover or visit www.ti.com Typical Characteristics PT5100 Series 1-A Positive Step-down Integrated Switching Regulator PT5103, 3.3 VDC PT5101, 5.0 VDC (See Note A) Efficiency vs Output Current PT5102, 12.0 VDC (See Note A) Efficiency vs Output Current Efficiency vs Output Current 90 100 (See Note A) 100 85 80 Vin 70 9.0V 12.0V 18.0V 60 Vin 75 9.0V 12.0V 18.0V 24.0V 30.0V 38.0V 70 65 60 55 Efficiency - % 90 80 Efficiency - % Efficiency - % 90 Vin 80 16.0V 20.0V 24.0V 30.0V 35.0V 38.0V 70 60 24.0V 50 26.0V 50 50 45 40 0 40 0 0.2 0.4 0.6 0.8 0.2 0.4 0.6 0.8 40 1 0 1 Iout-(Amps) Ripple vs Output Current 0.4 Ripple vs Output Current 60 120 50 100 40 80 26.0V 24.0V 18.0V 12.0V 9.0V 20 10 0.8 1 Ripple vs Output Current 250 200 Vin 38.0V 30.0V 24.0V 18.0V 60 12.0 V 9.0V 40 20 38.0V 35.0V 30.0V 24.0V 20.0V 16.0V 150 Ripple-(mV) Vin Ripple-(mV) 30 0.6 Iout-(Amps) Vin Ripple-(mV) 0.2 Iout-(Amps) 100 50 0 0 0 0 0.2 0.4 0.6 0.8 0.2 0.4 0.8 0 1 0 Iout-(Amps) Thermal Derating (Ta) 0.6 1 Thermal Derating (Ta) (See Note B) 60C Iout-(Amps) Iout-(Amps) Iout-(Amps) 50C 70C 0.6 0 85C 0.4 15 17 19 21 23 25 27 70C 0.6 85C 0.4 0.2 0 0 13 60C 0.8 0.2 11 (See Note B) 50C 0.2 9 1 1 0.8 0.4 0.8 Thermal Derating (Ta) (See Note B) 70C 0.8 85C 0.6 Iout-(Amps) 1 7 0.4 Iout-(Amps) 1 0.6 0.2 7 11 15 19 Vin-(Volts) 23 27 31 35 15 39 17 19 21 Vin-(Volts) Power Dissipation vs Output Current 25 27 29 31 33 35 37 Vin-(Volts) Power Dissipation vs Output Current 1.2 23 Power Dissipation vs Output Current 1. 8 2. 4 1. 6 1 2 1. 4 26.0V 24.0V 18.0V 0.6 12.0V 9.0V 0.4 38.0V 30.0V 24.0V 18.0V 12.0V 9.0V 1 0. 8 0. 6 0. 4 0.2 Vin Vin 1. 2 PD-(Watts) 0.8 PD-(Watts) PD-(Watts) Vin 1. 6 38 .0V 35 .0V 30 .0V 24 .0V 20 .0V 16 .0V 1. 2 0. 8 0. 4 0. 2 0 0 0 0 0.2 0.4 0.6 Iout-(Amps) 0.8 1 0 0. 2 0. 4 0. 6 0. 8 1 0 0. 2 Iout-(Amps) Note A: Characteristic data has been developed from actual products tested at 25C. This data is considered typical data for the Converter. Note B: Thermal derating graphs are developed in free-air convection cooling, which corresponds to approximately 40-60LFM of airflow. For technical support and more information, see inside back cover or visit www.ti.com 0. 4 0. 6 0. 8 Iout-(Amps) 1 39 PACKAGE OPTION ADDENDUM www.ti.com 28-Aug-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp Samples (Requires Login) PT5101A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5101C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5101CT NRND SIP MODULE EAC 3 200 TBD Call TI Level-1-215C-UNLIM PT5101G NRND SIP MODULE EAG 3 16 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5101H NRND SIP MODULE EAH 3 16 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5101J NRND SIP MODULE EAJ 3 16 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5101L NRND SIP MODULE EAL 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5101M NRND SIP MODULE EAM 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5101N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5101S NRND SIP MODULE EAF 3 16 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5101U NRND SIP MODULE EAU 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5102A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5102C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5102CT NRND SIP MODULE EAC 3 200 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5102H NRND SIP MODULE EAH 3 16 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5102M NRND SIP MODULE EAM 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5102N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5103A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5103C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5103L NRND SIP MODULE EAL 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5103M NRND SIP MODULE EAM 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5103N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5105A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5105C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5105N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5107A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5107C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5107J NRND SIP MODULE EAJ 3 16 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5107M NRND SIP MODULE EAM 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5107N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type Addendum-Page 1 (3) PACKAGE OPTION ADDENDUM www.ti.com 28-Aug-2012 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5109C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5109N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5110A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5110C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5110N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type OBSOLETE SIP MODULE EAM 3 TBD Call TI Call TI EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5111A PT5111N NRND SIP MODULE Samples (Requires Login) PT5109A PT5111M (3) PT5112A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5112C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5112N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 28-Aug-2012 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 MECHANICAL DATA MPSI005 - MARCH 2001 EAA (R-PSIP-T3) PLASTIC SINGLE-IN-LINE MODULE 1.00 (25,40) MAX. 0.25 (6,35) 0.50 (12,70) 1.02 (25,90) MAX. 0.40 (10,16) 0.017 (0,43) TYP. 1 0.040 (1,01) 0.017 (0,43) TYP. 0.100 (2,54) TYP. 0.38 (9,65) MAX. 0.40 (10,16) 0.140 (3,55) MIN. 1.06 (26,92) 0.36 (9,14) Note E. 0.34 (8,63) Note F. 0.20 (5,08) 1.13 (28,70) 1 0.040 (1,01) 0.07 (1,77) o0.035 (0,88) MIN. 3 Places Plated through 0.43 (10,92) 0.100 (2,54) 2 Places PC LAYOUT 4201996/A 02/01 NOTES: A. B. C. D. E. F. All linear dimensions are in inches (mm). This drawing is subject to change without notice. 2-place decimals are " 0.030 (" 0, 76 mm). 3-place decimals are " 0.010 (" 0, 25 mm). Recommended mechanical keep-out area. No copper, power or signal traces in this area. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 MECHANICAL DATA MPSI006 - MARCH 2001 EAC (R-PSIP-G3) PLASTIC SINGLE-IN-LINE MODULE 1.00 (25,40) MAX. 0.25 (6,35) 0.50 (12,70) 1.02 (25,90) MAX. 0.40 (10,16) 1 0.080 (2,02) MIN. 0.017 (0,43) TYP. 0.100 (2,54) TYP. 0.40 (10,16) 0.38 (9,65) MAX. Seating Plane 0.006 (0,15) MAX. 1.06 (26,92) 0.36 (9,14) Note E. 0.34 (8,63) Note G 0.040 (1,01) 1.16 (29,46) 0.10 (2,54) 0 - 7 Gage Plane 1 0.017 (0,43) TYP. 0.17 (4,31) See Note F 0.150 (3,81) 0.040 (1,01) 3 Places 0.43 (10,92) 0.100 (2,54) 2 Places PC LAYOUT 4201997/A 02/01 NOTES: A. B. C. D. E. F. All linear dimensions are in inches (mm). This drawing is subject to change without notice. 2-place decimals are " 0.030 (" 0, 76 mm). 3-place decimals are " 0.010 (" 0, 25 mm). Recommended mechanical keep-out area. Power pin connections should utilize two or more vias per input, ground and output pin. G. No copper, power or signal traces in this area. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 MECHANICAL DATA MPSI007A - MARCH 2001 0 REVISED JANUARY 2002 EAJ (R-PSIP-G3) PLASTIC SINGLE-IN-LINE MODULE Suffix J 1.00 (25,40) MAX. 0.16 (4,06) 0.25 (6,35) 0.68 (17,27) MAX. 0.50 (12,70) o0.156 (3,96) 2 Places 0.400 (10,16) 0.30 (7,62) 1.39 (35,30) MAX. Note H 1.16 (29,46) 1.02 (25,90) MAX. 0.40 (10,16) 1 0.017 (0,43) TYP. 0.100 (2,54) TYP. 0.40 (10,16) 0.080 (2,02) MIN. 0.38 (9,65) MAX. 1.06 (26,92) 0.16 (4,06) 0.36 (9,14) 0.006 (0,15) MAX. 0.74 (18,79) 0.400 (10,16) 0.34 (8,63) Seating Plane Hole for #6-32 screws Note E, H 0.040 (1,01) 0.100 (2,54) 1.180 (29,97) Note F 1.16 (29,46) 0.10 (2,54) 1.52 (38,60) 0 - 7 Gage Plane 0.017 (0,43) TYP 1 See Note G 0.17 (4,31) 0.150 (3,81) 0.040 (1,01) 3 Places 0.43 (10,92) 0.100 (2,54) 2 Places PC LAYOUT NOTES: A. B. C. D. E. F. 4201999/B 12/01 All linear dimensions are in inches (mm). This drawing is subject to change without notice. 2-place decimals are " 0.030 (" 0, 76 mm). 3-place decimals are " 0.010 (" 0, 25 mm). Recommended mechanical keep-out area. No copper, power or signal traces in this area. POST OFFICE BOX 655303 G. Power pin connections should utilize two or more vias per input, ground and output pin. H. The metal tab is isolated but electrically conductive. No signal traces are allowed under the metal tab area. A solid copper island is recommended, which may be grounded. * DALLAS, TEXAS 75265 1 MECHANICAL DATA MPSI008 - MARCH 2001 EAL (R-PSIP-G3) PLASTIC SINGLE-IN-LINE MODULE 0.040 (1,01) 1.00 (25,40) MAX. Note J. 0.19 (4,82) 0.25 (6,35) 0.50 (12,70) 0.042 (1,06) 0.36 (9,19) 0.036 (0,91) 0.210 (5,33) Note F. 1.02 (25,90) MAX. 0.67 (17,01) 0.40 (10,16) 1 0.40 (10,16) 0.38 (9,65) MAX. 0.080 (2,02) 0.017 (0,43) TYP. 0.100 (2,54) TYP. Seating Plane 0.006 (0,15) MAX. 1.06 (26,92) 0.34 (8,63) 0.36 (9,14) 0.040 (1,01) 0.425 (10,79) Note E. 0 - 7 Gage Plane 0.017 (0,43) TYP. Note L. 1.16 (29,46) 0.930 (23,62) CL to CL 0.10 (2,54) 0.080 (2,03) 2 Places Note H. 0.33 1 (8,38) See Note G. 0.17 (4,31) 0.040 (1,01) 3 Places 0.150 (3,81) 0.085 (2,16) 0.43 (10,92) 0.210 (5,33) 0.38 (9,65) 0.100 (2,54) 2 Places PC LAYOUT NOTES: Note K. 0.280 (7,11) A. B. C. D. E. F. All linear dimensions are in inches (mm). This drawing is subject to change without notice. 2-place decimals are " 0.030 (" 0, 76 mm). 3-place decimals are " 0.010 (" 0, 25 mm). Recommended mechanical keep-out area. The metal tab is isolated but electrically conductive. No signal traces are allowed under the metal tab area. A solid copper island is recommended, which may be grounded. G. Power pin connections should utilize two or more vias per input, ground and output pin. POST OFFICE BOX 655303 4202000/A 02/01 H. Minimum copper land area required for solder tab. Vias are recommended to improve copper adhesion or connect land to other ground area. J. Underside solder tabs detail K. Solder mask openings to copper island for solder joints to mechanical pins. L. No copper, power or signal traces in this area. * DALLAS, TEXAS 75265 1 MECHANICAL DATA MPSI010 - MARCH 2001 EAD (R-PSIP-T3) PLASTIC SINGLE-IN-LINE MODULE 1.00 (25,40) MAX. 0.25 (6,35) 0.50 (12,70) 1.02 (25,90) MAX. 0.40 (10,16) 1 0.170 (4,31) MIN. 0.017 (0,43) TYP. 0.40 (10,16) 0.38 (9,65) MAX. 0.100 (2,54) TYP. 1.06 (26,92) Note E 0.100 (2,54) 2 Places 0.43 (10,92) 0.017 (0,43) TYP. 0.040 (1,01) 1 0.42 (10,66) o0.035 (0,88) MIN. 3 Places Plated through PC LAYOUT 4202002/A 02/01 NOTES: A. B. C. D. E. All linear dimensions are in inches (mm). This drawing is subject to change without notice. 2-place decimals are " 0.030 (" 0, 76 mm). 3-place decimals are " 0.010 (" 0, 25 mm). Recommended mechanical keep-out area. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 MECHANICAL DATA MPSI011 - MARCH 2001 EAF (R-PSIP-T3) PLASTIC SINGLE-IN-LINE MODULE 1.00 (25,40) MAX. 0.16 (4,06) 0.25 (6,35) 0.68 (17,27) MAX. 0.50 (12,70) o0.156 (3,96) 2 Places 0.400 (10,16) 0.30 (7,62) 1.39 (35,30) MAX. 1.16 (29,46) 1.02 (25,90) MAX. Note F 0.40 (10,16) 1 0.017 (0,43) TYP. 0.40 (10,16) 0.170 (4,31) MIN. 1.06 (26,92) 0.100 (2,54) 2 Places 0.43 (10,92) 0.017 (0,43) TYP. 0.38 (9,65) MAX. 0.100 (2,54) TYP. Note E 0.040 (1,01) 1 0.42 (10,66) o0.035 (0,88) MIN. 3 Places Plated through PC LAYOUT 4202003/A 02/01 NOTES: A. B. C. D. E. F. All linear dimensions are in inches (mm). This drawing is subject to change without notice. 2-place decimals are " 0.030 (" 0, 76 mm). 3-place decimals are " 0.010 (" 0, 25 mm). Recommended mechanical keep-out area. The metal tab is isolated but electrically conductive, it can be grounded. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 MECHANICAL DATA MPSI012 - MARCH 2001 EAU (S-PSIP-T3) PLASTIC SINGLE-IN-LINE MODULE 0.90 (22,86) 0.26 (6,60) 0.90 (22,86) 0.92 (23,36) 1.09 (27,68) REF. 0.170 (4,31) Seating Plane 1 0.017 (0,43) TYP. 0.350 (8,89) 0.017 (0,43) TYP. 0.32 (8,12) 0.100 (2,54) TYP. 0.96 (24,38) 0.38 (9,65) 0.100 (2,54) TYP. 0.040 (1,01) 1 0.26 (6,60) o0.035 (0,88) MIN. 3 Places Plated through 0.38 (9,65) 0.50 (12,70) Note E PC LAYOUT 4202004/A 02/01 NOTES: A. B. C. D. E. All linear dimensions are in inches (mm). This drawing is subject to change without notice. 2-place decimals are " 0.030 (" 0, 76 mm). 3-place decimals are " 0.010 (" 0, 25 mm). Recommended mechanical keep-out area. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 MECHANICAL DATA MPSI023A - MARCH 2001 - REVISED JANUARY 2002 EAH (R-PSIP-T3) PLASTIC SINGLE-IN-LINE MODULE 1.00 (25,40) MAX. 0.16 (4,06) Suffix H 0.68 (17,27) MAX. 0.50 (12,70) 0.25 (6,35) o0.156 (3,96) 2 Places 0.400 (10,16) 0.30 (7,62) 1.16 (29,46) 1.39 (35,30) MAX. Note G 1.02 (25,90) MAX. 0.40 (10,16) 0.017 (0,43) TYP. 1 0.017 (0,43) TYP. 0.40 (10,16) 0.040 (1,01) 0.100 (2,54) TYP. 1.140 (3,55) MIN. 0.38 (9,65) MAX. 1.06 (26,92) 0.16 (4,06) 0.74 (18,79) 0.400 (10,16) 0.34 (8,63) 0.36 (9,14) Hole for #6-32 screws Note E, G 1.190 (30,22) 0.100 (2,54) Note F 1.13 (28,70) 1.49 (37,84) 0.20 (5,08) 1 0.07 (1,77) 0.040 (1,01) 0.43 (10,92) o0.035 (0,88) MIN. 3 Places Plated through 0.100 (2,54) 2 Places NOTES: PC LAYOUT A. All linear dimensions are in inches (mm). B. This drawing is subject to change without notice. C. 2-place decimals are " 0.030 (" 0, 76 mm). D. 3-place decimals are " 0.010 (" 0, 25 mm). E. Recommended mechanical keep-out area. POST OFFICE BOX 655303 4201998/B 12/01 F. No copper, power or signal traces in this area. G. The metal tab is isolated but electrically conductive. No signal traces are allowed under the metal tab area. A solid copper island is recommended, which may be grounded. * DALLAS, TEXAS 75265 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated