DTC143TUA SOT-323 DIGITAL TRANSISTOR TRANSISTORS(NPN) FEATURES * Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors.(see equivalent circuit). * The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. SOT-323 * Only the on/off conditions need to be set for operation marking device design easy. MECHANICAL DATA * * * * * 0.053(1.35) 0.045(1.15) Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.006 gram 0.006(0.15) 0.003(0.08) 0.043(1.10) 0.035(0.90) REF 0.021(0.53) 0.004(0.10) 0.000(0.00) 0.096(2.45) 0.085(2.15) 0.016(0.40) 0.008(0.20) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. (2) 1 0.055(1.40) 0.047(1.20) O 3 (1) (3) 0.087(2.20) 0.079(2.00) 2 (1) Base (2) Emitter (3) Collector Dimensions in inches and (millimeters) o MAXIMUM RATINGES ( @ TA = 25 C unless otherwise noted ) SYMBOL VALUE UNITS Collector-base voltage RATINGS V(BR)CBO 50 V Collector-emitter voltage V(BR)CEO 50 V Emitter-base voltage V(BR)EBO 5 V Collector current IC 100 mA Collector power dissipation PC 200 mW Junction temperature Tj 150 o C -55~150 o C Storage temperature Tstg ELECTRICAL CHARACTERISTICS ( @ TA = 25oC unless otherwise noted ) SYMBOL MIN. TYP. MAX. UNITS Collector-base breakdown voltage (IC= 50mA) CHARACTERISTICS V(BR)CBO 50 - - V Collector-emitter breakdown voltage (IC= 1mA) V(BR)CEO 50 - - V Emitter-base breakdown voltage (IE= 50mA) V(BR)EBO 5 - - V Collector cut-off current (VCB= 50V) ICBO - - 0.5 mA Emitter cut-off current (VEB= 4V) IEBO - - 0.5 mA Collector-emitter saturation voltage (IC= 5mA,IB= 0.25mA) hFE - - 0.3 V VCE(sat) 100 - 600 - Input resistor R1 3.29 4.7 6.11 KW Transition frequency (VO= 10V, IO= 5mA, f=100MHz) fT - 250 - DC current gain (VCE= 5V,IC= 1mA) NOTE: "Fully ROHS compliant", "100% Sn plating (Pb-free)". MHz 2006-3 RATING AND CHARACTERISTICS CURVES (DTC143TUA) 1 1000 VCE = 5V 200 O TA= 100 C O 25 C O -40 C 100 50 20 10 5 200m O TA= 100 C O 25 C O -40 C 100m 50m 20m 10m 5m 2m 2 1 IO / I B = 20 500m IO, OUTPUT CURRENT (A) VI(on), INPUT VOLTAGE (V) 500 100m 200m 500m 1m 2m 5m 10m 20m 50m 100m 1m 100m 200m IO, OUTPUT CURRENT (A) 2m 5m 10m 20m 50m 100m VI(off), INPUT VOLTAGE (V) Figure1 Input voltage vs. output current (ON Characteristics) Figure2 Output current vs. input voltage (OFF Characteristics) COLLECTOR BASE 500m 1m R1 EMITTER Figure3 Equivalent circuit DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.