Dual Channel Line Receiver Hermetically Sealed Optocoupler Technical Data HCPL-1930 HCPL-1931 HCPL-193K 5962-89572 Features Applications Description * Dual Marked with Device Part Number and DSCC Standard Microcircuit Drawing * Manufactured and Tested on a MIL-PRF-38534 Certified Line * QML-38534, Class H and Class K * Hermetically Sealed 16-pin Dual In-Line Package * Performance Guaranteed Over -55C to +125C * High Speed - 10 Mb/s * Accepts a Broad Range of Drive Conditions * Adaptive Line Termination Included * Internal Shield Provides Excellent Common Mode Rejection * External Base Lead Allows "LED Peaking" and LED Current Adjustment * 1500 Vdc Withstand Test Voltage * High Radiation Immunity * HCPL-2602 Function Compatibility * Reliability Data Available * Military and Space * High Reliability Systems * Isolated Line Receiver * Simplex/Multiplex Data Transmission * Computer-Peripheral Interface * Microprocessor System Interface * Harsh Environmental Environments * Digital Isolation for A/D, D/A Conversion * Current Sensing * Instrument Input/Output Isolation * Ground Loop Elimination * Pulse Transformer Replacement The HCPL-193X devices are dual channel, hermetically sealed, high CMR, line receiver optocouplers. The products are capable of operation and storage over the full military temperature range and can be purchased as either a standard product or with full MIL-PRF-38534 Class Level H or K testing, or from the DSCC Standard Microcircuit Drawing (SMD) 5962-89572. This is a sixteen pin DIP which may be purchased with a variety of lead bend and plating options. See selection guide table for details. Standard Microcircuit Drawing (SMD) parts are available for each lead style. Truth Table Functional Diagram The connection of a 0.1 F bypass capacitor between pins 15 and 10 is recommended. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. 2 All devices are manufactured and tested on a MIL-PRF-38534 certified line and are included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Microcircuits. Each unit contains two independent channels, consisting of a GaAsP light emitting diode, an input current regulator, and an integrated high gain photon detector. The input regulator serves as a line termination for line receiver applications. It clamps the line voltage and regulates the LED current so line reflections do not interfere with circuit performance. The regulator allows a typical LED current of 12.5 mA before it starts to shunt excess current. The output of the detector IC is an open collector Schottky clamped transistor. An enable input gates the detector. The internal detector shield provides a guaranteed common mode transient immunity specification of +1000 V/sec. Selection Guide-Package Styles and Lead Configuration Options Agilent Part # and Options Commercial MIL-PRF-38534 Class H MIL-PRF-38534 Class K Standard Lead Finish Solder Dipped Butt Joint/Gold Plate Gull Wing/Soldered Crew Cut/Gold Plate Class H SMD Part # Prescript for all below Either Gold or Soldered Gold Plate Solder Dipped Butt Joint/Gold Plate Butt Joint/Soldered Gull Wing/Soldered Crew Cut/Gold Plate Crew Cut/Soldered Class K SMD Part # Prescript for all below Either Gold or Soldered Gold Plate Solder Dipped Butt Joint/Gold Plate Butt Joint/Soldered Gull Wing/Soldered HCPL-1930 HCPL-1931 HCPL-193K Gold Option #200 Option #100 Option #300 Option #600 59628957201EX 8957201EC 8957201EA 8957201YC 8957201YA 8957201XA Available Available 59628957202KEX 8957202KEC 8957202KEA 8957202KYC 8957202KYA 8957202KXA DC specifications are compatible with TTL logic and are guaranteed from -55C to +125C allowing trouble-free interfacing with digital logic circuits. An input current of 10 mA will sink a six gate fan-out (TTL) at the output with a typical propagation delay from input to output of only 45 nsec. 3 Outline Drawings 16 Pin DIP Through Hole, 2 Channels 20.06 (0.790) 20.83 (0.820) 8.13 (0.320) MAX. 0.89 (0.035) 1.65 (0.065) 4.45 (0.175) MAX. 0.51 (0.020) MIN. 3.81 (0.150) MIN. 2.29 (0.090) 2.79 (0.110) 0.51 (0.020) MAX. NOTE: DIMENSIONS IN MILLIMETERS (INCHES). Device Marking Agilent DESIGNATOR Agilent P/N DSCC SMD* DSCC SMD* PIN ONE/ ESD IDENT A QYYWWZ XXXXXX XXXXXXX XXX XXX 50434 * QUALIFIED PARTS ONLY COMPLIANCE INDICATOR,* DATE CODE, SUFFIX (IF NEEDED) COUNTRY OF MFR. Agilent CAGE CODE* 0.20 (0.008) 0.33 (0.013) 7.36 (0.290) 7.87 (0.310) 4 Hermetic Optocoupler Options Option 100 Description Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on commercial and hi-rel product. 4.32 (0.170) MAX. 0.20 (0.008) 0.33 (0.013) 0.51 (0.020) MIN. 1.14 (0.045) 1.40 (0.055) 2.29 (0.090) 2.79 (0.110) 7.36 (0.290) 7.87 (0.310) 0.51 (0.020) MAX. 200 Lead finish is solder dipped rather than gold plated. This option is available on commercial and hi-rel product. DSCC Drawing part numbers contain provisions for lead finish. 300 Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is available on commercial and hi-rel product. This option has solder dipped leads. 4.57 (0.180) MAX. 0.51 (0.020) MIN. 1.40 (0.055) 1.65 (0.065) 2.29 (0.090) 2.79 (0.110) 600 4.57 (0.180) MAX. 0.20 (0.008) 0.33 (0.013) 5 MAX. 9.65 (0.380) 9.91 (0.390) 0.51 (0.020) MAX. Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on commercial and hi-rel product. Contact factory for the availability of this option on DSCC part types. 3.81 (0.150) MIN. 0.51 (0.020) MIN. Note: Dimensions in millimeters (inches). 0.20 (0.008) 0.33 (0.013) 2.29 (0.090) 2.79 (0.110) 1.14 (0.045) 1.25 (0.049) 7.36 (0.290) 7.87 (0.310) 5 Absolute Maximum Ratings Storage Temperature ................................................. -65C to +150C Operating Temperature ............................................... -55C to +125C Lead Solder Temperature ................................................ 260C for 10 s 1.6 mm below seating plane Forward Input Current - II (each channel) ................................. 60 mA2 Reverse Input Current ................................................................. 60 mA Supply Voltage - VCC ....................................... 7 V (1 Minute Maximum) Enable Input Voltage - VE (each channel) ...................................... 5.5 V Not to exceed VCC by more than 500 mV Output Collector Current - IO (each channel) ............................. 25 mA Output Collector Power Dissipation (each channel) ................... 40 mW Output Collector Voltage - VO (each channel) ................................... 7 V Total Package Power Dissipation .............................................. 564 mW Input Power Dissipation (each channel) ................................... 168 mW Schematic A 0.1 F BYPASS CAPACITOR MUST BE CONNECTED BETWEEN PINS 10 AND 15 (SEE NOTE 1). ESD Classification (MIL-STD-883, Method 3015) .............................................. (), Class 1 Recommended Operating Conditions Parameter Symbol Min. Max. Units Input Current, Low Level IIL 0 250 A Input Current, High Level* IIH 12.5 60 mA Supply Voltage, Output VCC 4.5 5.5 V High Level Enable Voltage VEH 2.0 VCC V Low Level Enable Voltage VEL 0 0.8 V 5 TTL Loads 125 C Fan Out (@ RL = 4 k) N Operating Temperature TA -55 *12.5 mA condition permits at least 20% guardband for optical coupling variation. Initial switching threshold is 10 mA or less. 6 Electrical Specifications TA = -55C to 125C unless otherwise stated. See note 15. Parameter Symbol Test Conditions High Level Output Current IOH VCC = 5.5 V, VO = 5.5 V II = 250 A, VE = 2.0 V Low Level Output Voltage VOL VCC = 5.5 V; II = 10 mA VE = 2.0 V, IOL (Sinking) = 10 mA Group A Limits Subgroups Min. Typ.* Max. Units Fig. Note 1, 2, 3 20 250 A 3 3 1, 2, 3 0.3 0.6 V 1 3 2.2 2.6 V 2 3 2.35 2.75 II = 10 mA Input Voltage VI 1, 2, 3 II = 60 mA Input Reverse Voltage VR IR = 10 mA 1, 2, 3 0.8 1.10 V 3 Low Level Enable Current I EL VCC = 5.5 V, VE = 0.5 V 1, 2, 3 -1.45 -2.0 mA 3 High Level Enable Voltage VEH 1, 2, 3 V 3, 12 Low Level Enable Voltage VEL 1, 2, 3 0.8 V 3 High Level Supply Current ICCH VCC = 5.5 V; II = 0, VE = 0.5 V both channels 1, 2, 3 21 28 mA Low Level Supply Current ICCL VCC = 5.5 V; II = 60 mA, VE = 0.5 V both channels 1, 2, 3 27 36 mA 1 A Input-Output Insulation Leakage Current II-O Relative Humidity = 45% t = 5 s, VI-O = 1500 Vdc Propagation Delay Time to High Output Level t PLH RL = 510 ; CL = 50 pF, II = 13 mA,VCC = 5.0 V Propagation Delay Time to Low Output Level t PHL Common Mode Transient Immunity at High Output Level Common Mode Transient Immunity at Low Output Level 2.0 1 9 55 10, 11 |CMH| |CML| VCM = 50 V (peak), VO (min.) = 2 V, RL = 510 ; II = 0 mA, VCC = 5.0 V VCM = 50 V (peak), VO (max.) = 0.8 V, RL = 510 ; II = 10 mA, VCC = 5.0 V *All typical values are at VCC = 5 V, TA = 25C. 100 ns 4, 5 3, 5 ns 4, 5 3, 6 140 9 RL = 510 ; CL = 50 pF, II = 13 mA, VCC = 5.0 V 4 60 10, 11 100 120 9, 10, 11 1000 10,000 V/s 8, 9 3, 9, 14 9, 10, 11 1000 10,000 V/s 8, 9 3, 10, 14 7 Typical Specifications TA = 25C, VCC = 5 V Parameter Symbol Typ. Units Test Conditions Fig. Note Resistance (Input-Output) R I-O 10 VI-O = 500 V dc 3, 13 Capacitance (Input-Output) CI-O 1.7 pF f = 1 MHz 3, 13 Input-Input Insulation Leakage Current II-I 0.5 nA 45% Relative Humidity, VI-I = 500 Vdc, t = 5 s 11 Resistance (Input-Input) R I-I 1012 VI-I = 500 Vdc 11 Capacitance (Input-Input) CI-I 0.55 pF f = 1 MHz 11 Propagation Delay Time of Enable from VEH to VEL tELH 35 ns Propagation Delay Time of Enable from VEL to VEH tEHL 35 ns Output Rise Time (10-90%) tr 30 ns Output Fall Time (90-10%) tf 24 ns Input Capacitance CI 60 pF 12 RL = 510 , CL = 15 pF, II = 13 mA, V EH = 3 V, V EL = 0 V RL = 510 , CL = 15 pF, II = 13 mA 6, 7 3, 7 6, 7 3, 8 3 3 f = 1 MHz, VI = 0, PINS 1 to 2 or 5 to 6 3 Notes: 1. Bypassing of the power supply line is required, with a 0.1 F ceramic disc capacitor adjacent to each isolator. The power supply bus for the isolators should be separate from the bus for any active loads, otherwise additional bypass capacitance may be needed to suppress regenerative feedback via the power supply. 2. Derate linearly at 1.2 mA/C above TA = 100C. 3. Each channel. 4. Device considered a two terminal device: pins 1 through 8 are shorted together, and pins 9 through 16 are shorted together. 5. The tPLH propagation delay is measured form the 6.5 mA point on the trailing edge of the input pulse to the 1.5 V point on the trailing edge of the output pulse. 6. The tPHL propagation delay is measured from the 6.5 mA point on the leading edge of the input pulse to the 1.5 V point on the leading edge of the output pulse. 7. The tELH enable propagation delay is measured from the 1.5 V point on the trailing edge of the enable input pulse to the 1.5 V point on the trailing edge of the output pulse. 8. The tEHL enable propagation delay is measured from the 1.5 V point on the leading edge of the enable input pulse to the 1.5 V point on the leading edge of the output pulse. 9. CMH is the maximum tolerable rate of rise of the common mode voltage to assure that the output will remain in a high logic state, i.e. VOUT > 2.0 V. 10. CML is the maximum tolerable rate of fall of the common mode voltage to assure that the output will remain in a low logic state, i.e. VOUT < 0.8 V. 11. Measured between adjacent input leads shorted together, i.e. between 1, 2 and 4 shorted together and pins 5, 6 and 8 shorted together. 12. No external pull up is required for a high logic state on the enable input. 13. Measured between pins 1 and 2 or 5 and 6 shorted together, and pins 10 through 15 shorted together. 14. Parameters shall be tested as part of device initial characterization and after process changes. Parameters shall be guaranteed to the limits specified for all lots not specifically tested. 15. Standard parts receive 100% testing at 25C (Subgroups 1 and 9). Hi-Rel and SMD parts receive 100% testing at 25, 125, and -55C (Subgroups 1 and 9, 2 and 10, 3 and 11, respectively). 8 Figure 1. Input-Output Characteristics. Figure 2. Input Characteristics. Figure 4. Propagation Delay vs. Temperature. Figure 5. Test Circuit for tPHL and tPLH. Figure 6. Enable Propagation Delay vs. Temperature. Figure 7. Test Circuit for tEHL and t ELH. Figure 3. High Level Output Current vs. Temperature. 9 Figure 8. Typical Common Mode Transient Immunity. 1 IIN VIN 5V 16 A 2 B 3 14 4 13 5 12 VCC 15 6 11 7 GND 10 8 510 OUTPUT VO MONITORING 0.01 F NODE BYPASS 9 VCM + - PULSE GEN. Figure 9. Test Circuit for Common Mode Transient Immunity and Typical Waveforms. VCC +5.5 V VOUT +2.6 V 100 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 200 100 200 - VIN +5.0 V + 0.01 F CONDITIONS: II = 30 mA IO = 10 mA VCC = 5.5 V Figure 10. Burn In Circuit. TA = +125 C 10 Application Circuits* HCPL-193X Figure A1. Polarity Non-Reversing. HCPL-193X Figure A2. Polarity Reversing, Split Phase. 11 Figure A3. Flop-Flop Configurations. MIL-PRF-38534 Class H, Class K, and DSCC SMD Test Program Agilent Technologies' Hi-Rel Optocouplers are in compliance with MIL-PRF-38534 Class H and K. Class H and Class K devices are also in compliance with DSCC drawing 5962-89572. Testing consists of 100% screening and quality conformance inspection to MIL-PRF-38534. www.semiconductor.agilent.com Data subject to change. Copyright (c) 2000 Agilent Technologies Obsoletes 5967-5809E 5968-9401E (4/00)