PolySwitch(R) PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com PRODUCT : VLR175F DOCUMENT: SCD 25501 PCN: A86976 REV LETTER: F REV DATE: JUNE 25, 2007 PAGE NO.: 1 OF 1 Overcurrent Protection Device Raychem Circuit Protection Products Specification Status: Released Maximum Electrical Rating Operating Voltage: 12Vdc Interrupt Current: 100A Chip Size: 3 X 12mm Leads: Nickel 1/4H 0.125mm nominal thickness Tape: Polyester (White) 13mm nominal width Solder: Lead-free ORIENTATION MARK (Purple) Marking: (Color: Green) Manufacturer's Mark R1X Part Identification Lot Identification TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX 23.0 24.5 2.9 3.3 (0.91) (0.96) (0.11) (0.13) *Rounded off approximation C MIN 0.5 (0.02) D MAX 0.8 (0.03) MIN 4.7 (0.19) E MAX 7.2 (0.28) MIN 3.8 (0.15) F MAX 5.4 (0.21) MIN 2.4 (0.09) G MAX 2.6 (0.10) MIN MAX TABLE II. PERFORMANCE RATINGS: As measured in Mueller Kelvin Clips model BU-75K. I HOLD AMPS 25C HOLD 1.75 CURRENT TRIP LIMITS TIME TO TRIP REFERENCE RESISTANCE AMPS AMPS AMPS AMPS SECONDS AT OHMS AT 0C AT 25C AT 60C AT 80C 25C, 8.75A AT 25C HOLD TRIP HOLD TRIP HOLD TRIP HOLD TRIP MIN MAX MIN MAX 2.4 5.6 1.75 4.2 0.8 2.0 ------5 0.017 0.031 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: Materials Information: ROHS Compliant ONE-HOUR POST-TRIP RESISTANCE OHMS AT 25C MIN MAX 0.017 0.062 TRIPPEDSTATE POWER DISSIPATION WATTS AT 25C, 12V MAX 1.4 UL, TUV, CSA PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. ELV Compliant (c) 2006, 2007 Tyco Electronics Corporation. All rights reserved. Pb-Free