MGA-30316 3.3 -3.9GHz 1/2 Watt High Linearity Amplifier Data Sheet Description Features Avago Technologies' MGA-30316 is a high linearity 1/2 Watt PA with good OIP3 performance and exceptionally good PAE at p1dB gain compression point, achieved through the use of Avago Technologies' proprietary 0.25um GaAs Enhancement-mode pHEMT process. High linearity and P1dB The device required simple matching components to achieve wide bandwidth performance since it has a built in input prematch. Unconditionally Stable across load condition Built in adjustable temperature compensated internal bias circuitry With prematch - required simple matching GaAs E-pHEMT Technology [1] Standard QFN 3X3 package The adjustable temperature compensated internal bias circuit allowed the device to be operated at either class A or class AB operation 5V supply The MGA-30316 is housed inside a standard 16 pin QFN 3X3 package. MSL-1 and Lead-free Applications Class A driver amplifier for WiMAX Base Stations. General purpose gain block. High MTTF for base station application Specifications 3.5GHz; 5V, 198mA (typ) 44.4 dBm Output IP3 28.5 dBm Output Power at 1dB gain compression RFgnd 16 NC 15 NC 13 GND 14 16 pins QFN 3x3 NC 12 51.3% PAE at P1dB 2.7 dB Noise Figure 1 Vm VDD/RFout 11 2 Vbias GND VDD/RFout 10 3 RF in NC 9 4 NC Notes: 1. Enhancement mode technology employs positive gate voltage, thereby eliminating the need of negative gate voltage associated with conventional depletion mode devices. 5 NC 6 NC 7 GND 8 NC TOP VIEW Tape-and-Reel packaging option available 12.8 dB Gain Component Image 30316 YYWW XXXX Excellent uniformity in product specifications BOTTOM VIEW Notes: Package marking provides orientation and identification "30316" = Device Part Number "YYWW" = Year and Work Week of manufacture "XXXX" = Last 4 digit of Lot number Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 70 V ESD Human Body Model = 250 V Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control. Absolute Maximum Rating [1] TA=25C Symbol Parameter Units Absolute Max. Vdd,max Device Voltage, RF output to ground V 5.5 Ids,max Device Drain Current mA 400 Vctrl,max Control Voltage V 5.5 Pin,max CW RF Input Power dBm 22 Pdiss Total Power Dissipation [2] W 2.2 Tj, max Junction Temperature C 150 TSTG Storage Temperature C -65 to 150 Thermal Resistance [3] jc = 37 C/W (Vdd=5, Ids=200mA, Tc=85C) Notes: 1. Operation of this device in excess of any of these limits may cause permanent damage. 2. This is limited by maximum Vdd and Ids. Derate 27mW/ oC for Tc > 68.6 oC. 3. Thermal resistance measured using Infra-Red measurement technique. Electrical Specifications [4] TA = 25 C, Vdd =5V, Vctrl =5V, RF performance at 3.5 GHz, measured on demo board (see Fig.7) unless otherwise specified. Symbol Parameter and Test Condition Units Min. Typ. Max. Ids Quiescent current mA 155 198 250 Ictrl Vctrl current mA - 7 - Gain Gain dB 11 12.8 14 OIP3 [5] Output Third Order Intercept Point dBm 40 44.4 - OP1dB Output Power at 1dB Gain Compression dBm 27 28.5 - PAE Power Added Efficiency % - 51.3 - NF Noise Figure dB - 2.7 - S11 Input Return Loss, 50 source dB - -10 - S22 Output Return Loss, 50 load dB - -8.5 - S12 Reverse Isolation dB - -27 - Notes: 4. Measurements at 3.5GHz obtained using demo board described in Figure 6 and 7. 5. 3.5GHz OIP3 test condition: FRF1 - FRF2 = 10MHz with input power of -5dBm per tone measured at worse side band 6. Use proper bias, heat sink and de-rating to ensure maximum channel temperature is not exceeded. See absolute maximum ratings and application note (if applicable) for more details. 2 Product Consistency Distribution Charts [1, 2] CPK = 1.25, Stdev = 11.4 Figure 1. Ids at 3.5GHz; LSL=155mA, nominal =198mA, USL=250mA CPK = 5.68 Stdev = 0.087 Figure 3. P1dB at 3.5GHz; LSL=27dBm, nominal =28.5dBm CPK = 3.38 Stdev = 0.44 Figure 2. OIP3 at 3.5GHz; LSL=40dBm, nominal=44.4dBm Stdev = 0.56 Figure 4. PAE@P1dB 3.5GHz; nominal=51.3% CPK = 2.34 Stdev = 0.17 Figure 5. Gain at 3.5GHz; LSL=11dB, nominal =12.8dB, USL=14dB Notes: 1. Distribution data sample size is 500 samples taken from 3 different wafer lots and 3 different wafers. Future wafers allocated to this product may have nominal values anywhere between the upper and lower limits. 2. Measurements were made on a characterization test board, which represents a trade-off between optimal OIP3, gain, P1dB and PAE. Circuit trace losses have not been de-embedded from measurements above. 3 S-Parameter (Vdd=5V, Vctrl=5V, T=25C, unmatched 50 ohm) Freq (GHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 -6.82 -4.78 -4.18 -3.47 -2.93 -2.63 -2.41 -2.23 -2.15 -2.15 -2.11 -2.13 -2.2 -2.23 -2.47 -2.49 -2.6 -2.77 -2.99 -3.21 -3.39 -3.61 -3.8 -4.05 -4.33 -4.65 -5.05 -5.54 -6.12 -6.9 -7.88 -9.23 -11.19 -14.22 -19.94 -30.95 -17.87 -12.15 -8.81 -6.56 -4.98 -3.84 -3 -2.39 -1.96 -1.61 -1.35 -1.18 -1.02 -0.89 -0.85 -0.79 -0.73 -0.75 -0.75 -0.75 -0.82 -0.89 -0.91 -1.03 -151.29 -159.01 -166.18 -169.93 -173.8 -177.69 178.2 174.29 170.69 167.04 163.4 159.95 156.03 152.09 147.67 144.86 140.23 135.94 131.36 127.11 122.76 117.96 112.9 107.72 102.21 96.41 90.74 84.58 78.29 71.89 64.98 57.3 49.31 39.62 23.89 -79.21 -146.45 -160.58 -171.12 179.84 172.2 165.23 159.18 154.5 150.27 146.62 144.08 141.63 139.62 138.34 137.14 135.92 135.3 134.69 133.99 133.62 133.4 133.12 132.85 132.62 27.03 25.15 23.78 22.65 21.61 20.68 19.59 18.64 17.86 17.01 16.34 15.76 15.16 14.67 14.12 13.79 13.35 13.05 12.76 12.63 12.59 12.48 12.38 12.31 12.23 12.13 12.1 12.05 11.99 11.96 11.94 11.9 11.87 11.8 11.64 11.42 11.09 10.57 9.93 9.17 8.22 7.21 6.2 5.09 3.98 2.94 1.88 0.81 -0.15 -1.07 -2.07 -2.89 -3.7 -4.59 -5.33 -6 -6.76 -7.43 -8.01 -8.69 150.46 138.28 133.19 123.43 114.31 107.63 101.05 95.04 90.54 86.49 82.19 78.67 75.31 71.57 68.05 65.62 62.35 59.69 57.06 54.39 50.88 47.2 43.05 38.81 34.51 30.05 25.39 20.47 15.42 10.03 4.22 -1.9 -8.49 -15.78 -23.57 -31.82 -40.52 -49.43 -58.26 -66.62 -74.31 -81.56 -87.81 -93.09 -97.98 -102.25 -105.53 -108.81 -111.55 -113.65 -115.8 -117.73 -119.18 -120.78 -122.15 -123.2 -124.42 -125.61 -126.69 -127.93 -47.73 -41.95 -39.08 -37.52 -36.49 -35.95 -35.67 -35.37 -35.16 -35.02 -34.8 -34.6 -34.49 -34.32 -34.1 -33.46 -33.36 -33.04 -32.49 -31.8 -31.25 -30.93 -30.67 -30.34 -30.09 -29.85 -29.57 -29.32 -29.08 -28.83 -28.58 -28.45 -28.27 -28.12 -28.13 -28.22 -28.41 -28.82 -29.39 -30.07 -30.96 -31.96 -32.99 -34.14 -35.29 -36.42 -37.68 -38.92 -40.15 -41.37 -42.75 -44.04 -45.5 -47.13 -49.38 -50.75 -51.1 -51.76 -51.77 -52.06 71.5 64.79 55.33 46.92 38.95 33.44 29.42 26.01 23.86 22.13 20.22 19.29 18.58 17.24 20.11 15.95 14.77 15.06 15.09 12.77 8.84 5.55 1.89 -1.84 -4.96 -8.75 -12.78 -16.64 -21.03 -25.96 -31.04 -36.51 -42.81 -49.57 -56.85 -64.96 -73.3 -81.96 -90.63 -98.94 -106.74 -114.42 -121.08 -126.93 -132.83 -138.03 -143.09 -148.09 -153.01 -157.93 -163.22 -169.68 -176.84 174.68 167.69 167.52 157.54 147.91 135.29 122.98 -12.25 -8.27 -5.81 -4.38 -3.55 -3.15 -3.05 -2.97 -2.97 -3.08 -3.11 -3.2 -3.34 -3.42 -3.61 -3.69 -3.81 -3.93 -4.03 -3.97 -3.86 -3.88 -3.95 -3.95 -4.03 -4.11 -4.11 -4.17 -4.25 -4.25 -4.24 -4.26 -4.18 -4.05 -3.92 -3.72 -3.45 -3.21 -2.96 -2.73 -2.59 -2.48 -2.36 -2.33 -2.3 -2.27 -2.27 -2.29 -2.29 -2.29 -2.33 -2.34 -2.36 -2.41 -2.47 -2.48 -2.51 -2.53 -2.56 -2.61 -128.58 -130.03 -135.8 -143.58 -150.15 -155.24 -159.58 -162.74 -164.72 -166.58 -167.95 -168.64 -169.5 -170.22 -170.41 -170.18 -170.43 -169.7 -168.68 -168.24 -168.39 -168.52 -169.12 -169.52 -169.49 -169.94 -170.25 -170.13 -170.45 -170.58 -170.44 -170.23 -170.28 -170.11 -169.91 -170.28 -170.74 -171.49 -172.77 -174.21 -175.63 -177.43 -178.93 -179.99 178.66 177.63 177.01 176.27 175.63 175.36 175.03 174.63 174.49 174.31 174.11 174.1 174.03 173.71 173.44 173.08 4 S-Parameter Test circuit Vctr =5V Vdd =No Connect C6 =NU C10 =10pF L4=NU Rbias =0 ohm NC 1 12 Vdd RFout 2 9 Reference Plane NU = Not Used 5 8 4 NC NC 7 NC GND 10 6 3 NC C2 =NU R4 = 0 Ohm C11 = 0 Ohm Vdd RFout RFin NC L1 =NU 11 5 RFin C9 L3=NU Vm Vbias C1=0 Ohm C8 13 NC 14 GND 15 Vg 16 RFgnd C7 Reference Plane Top View RFout Bias Tee, 5V C3 =NU C5 =NU Demo Board Vctrl Vdd L4 C10 Rbias NC 1 12 Vdd RFout 2 11 R4 3 10 NC NC 4 9 RFout C5 8 NC 7 GND 6 NC NC C2 5 C3 L1 C11 Vdd RFout RFin RFin C9 L3 Vm Vbias C1 C8 13 NC 14 GND 15 Vg C7 16 RFgnd C6 Top View Figure 6. Demo board and application schematic Demo Board Part List Circuit Symbol Size Value Part Number Description L1 0402 2.2nH LLP1005-FH2N2C (Toko) MLC Inductor L3 0402 1.0nH LLP1005-FH1N0B (Toko) MLC Inductor GRM1555C1H1R0CZ01B (Murata) Ceramic Chip Capacitor L4 NU C1 0402 1.0pF C2 0402 NU C3 0402 1.3pF GJM1555C1H1R3CB01E (Murata) Ceramic Chip Capacitor C5 0402 0.5pF GJM1555C1HR50BB01 (Murata) Ceramic Chip Capacitor C6 NU C7 0402 0.1uF GRM155R71C104KA88D (Murata) Ceramic Chip Capacitor C8 0402 10pF GRM1555C1H100JZ01B (Murata) Ceramic Chip Capacitor C9 0805 2.2uF GRM21BR61E225KA12L (Murata) Ceramic Chip Capacitor C10 0402 10pF GRM1555C1H100JZ01B (Murata) Ceramic Chip Capacitor C11 0402 4.7pF GRM1555C1H4R7CZ01B (Murata) Ceramic Chip Capacitor R4 0402 0 ohm RK73Z1ETTP (KOA) Chip Resistor Note: Rbias is used to lower the quiescent current. Default is 0 ohm 6 Figure 7. Demo board Layout Recommended PCB material is 10 mils Rogers RO4350, with FR4 backing for mechanical strength. Suggested component values may vary according to layout and PCB material. MGA-30316 Typical Performance 250 240 230 220 210 200 190 180 170 160 150 OIP3 (dB) Ids (mA) TA = +25 C, Vdd = 5V, Vctrl = 5V, Input Signal = CW unless stated otherwise. 85C 25C -40C 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Frequency (GHz) Figure 8. Over Temperature Ids vs Frequency 7 3.8 3.9 4 48 47 46 45 44 43 42 41 40 39 38 85C 25C -40C 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Frequency (GHz) Figure 9. Over Temperature OIP3 vs Frequency 3.8 3.9 4 MGA-30316 Typical Performance TA = +25C, Vdd = 5V, Vctrl = 5V, Input Signal = CW unless stated otherwise. 31 16 15 14 13 12 11 10 9 8 7 6 30 Gain (dB) P1dB (dBm) 29 28 27 85C 25C -40C 26 25 24 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Frequency (GHz) 3.8 3.9 85C 25C -40C 3.2 3.3 3.4 3.5 3.6 3.7 Frequency (GHz) 3.8 3.9 4 S12 (dB) EVM(%) 3.3 3.4 3.5 3.6 3.7 Frequency (GHz) Figure 14. Over Temperature S12 vs Frequency 8 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 3.1 85C 25C -40C 3.2 3.3 3.4 3.5 3.6 3.7 Frequency (GHz) 3.8 3.9 4 85C 25C -40C 3.2 3.3 3.4 3.5 3.6 3.7 Frequency (GHz) 3.8 3.9 4 22 23 24 Figure 13. Over Temperature S22 vs Frequency Figure 12. Over Temperature S11 vs Frequency -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 3.1 3.2 Figure 11. Over Temperature Gain vs Frequency S22 (dB) S11 (dB) 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 3.1 3.1 4 Figure 10. Over Temperature P1dB vs Frequency 85C 25C -40C 3.8 3.9 4 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 85C 25C -40C 15 16 17 18 19 20 Pout(dBm) Figure 15. Over temperature EVM vs Pout at 3.5GHz 21 PCB Layout and Stencil Design 0.490 Chamfer 0.24 0.325 0.500 Chamfer 0.192 Chamfer 0.06 0.500 0.260 0.560 1.240 1.550 0.210 0.325 0.230 0.500 0.490 0.350 1.240 1.550 PCB Land Pattern (Top View) Stencil Outline 0.500 0.230 1.240 1.550 0.210 0.360 1.240 1.550 Combined PCB & Stencil Layouts Notes: 1. All dimensions are in milimeters. Part Number Ordering Information Product Family Part Number No. of Devices Container MGA-30316-TR1G 1000 MGA-30316-TR2G 3000 MGA-30316-BLKG 9 100 Frequency Band 7" Reel Output Power 700MHz-1GHz 1.7- 2.7GHz 3.3-3.9GHz 13" Reel 0.5W MGA-30116 MGA-30216 MGA-30316 1W ALM-31122 ALM-31222 ALM-31322 2W ALM-32120 ALM-32220 ALM-32320 antistatic bag Package Dimensions 0.20 Ref Pin 1 Dot by marking PIN #1 IDENTIFICATION CHAMFER 0.30 X 45 1.550.05 Exp.DAP 3.00 0.10 0.400.05 3.00 0.10 0.50 Bsc 30316 YYWW XXXX 1.550.05 Exp.DAP 0.230.05 0.00 0.05 1.50 Ref. 0.85 0.05 Bottom View Side View Top View Notes: 1. All dimensions are in milimeters 2. Dimensions are inclusive of plating 3. Dimensions are exclusive of mold flash and metal burr Device Orientation REEL USER FEED DIRECTION CARRIER TAPE USER FEED DIRECTION 30316 YYWW XXXX 30316 YYWW XXXX 30316 YYWW XXXX TOP VIEW END VIEW COVER TAPE Tape Dimensions 2.0 0.1[1] 0.3 0.05 4.0 0.1[2] 1.75 0.1 1.55 0.05 5.5 0.1[1] CL 3.3 0.1 1.6 0.1 12.0 0.3 R 0.3 Typical 1.55 0.1 8.0 0.1 Notes: 1. Measured from centerline of sprocket hole to centerline of pocket 2. Cumulative tolerance of 10 sprocket holes is 0.20 3. All dimensions in millimeter unless otherwise stated 10 3.30.1 Reel Dimension - 7 inch 6.25mm EMBOSSED LETTERS LETTERING THICKNESS: 1.6mm SLOT HOLE "a" SEE DETAIL "X" O178.00.5 SLOT HOLE "b" FRONT BACK 6 PS SLOT HOLE(2x) 180 APART. SLOT HOLE "a": 3.00.5mm(1x) SLOT HOLE "b": 2.50.5mm(1x) FRONT VIEW 45 1.5 MIN. +1.5* -0.0 +0.5 O13.0 -0.2 O20.2 MIN. 45 EMBOSSED RIBS RAISED: 0.25mm, WIDTH: 1.25mm BACK VIEW 11 BACK O55.00.5 FRONT O178.00.5 O51.20.3 SEE DETAIL "Y" 18.0* MAX. DETAIL "X" O178.00.5 R5.2 R10.65 120 65 12.4 3.5 DETAIL "Y" (Slot Hole) 1.0 6 PS RECYCLE LOGO Reel Dimension - 13 inch 11 12 1 2 0 2 10 9 7 6 5 3 4 DATE CODE 12MM 8 EMBOSSED LETTERING 16.0mm HEIGHT x MIN. 0.4mm THICK. O329.01.0 HUB O100.00.5 6 PS 02 12 12 10 911 876534 MP N CPN EMBOSSED LETTERING 7.5mm HEIGHT EMBOSSED LETTERING 7.5mm HEIGHT 1.5 (MI N.) FRONT VIEW EMBOSSED LINE (2x) 89.0mm LENGTH LINES 147.0mm AWAY FROM CENTER POINT +0.5 -0.2 20.2(MIN.) O13.0 ESD LOGO 11.9-15.4** +2.0* 12.4 -0.0 O16.0 6 PS RECYCLE LOGO Detail "X" SEE DETAIL "X" O100.00.5 O329.01.0 6 PS R19.00.5 BACK VIEW SLOT 5.00.5(3x) O12.30.5(3x) For product information and a complete list of distributors, please go to our web site: 18.4 MAX.* www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright (c) 2005-2012 Avago Technologies Limited. All rights reserved. AV02-1064EN - March 13, 2012