SMDA05-6R2 Unidirectional TVS Array for High-Speed Data Line Protection The SMDA05-6R2 transient voltage suppressor is designed to protect equipment attached to up to six high speed communication lines from ESD, EFT, and lightning. Features: SO-8 VOLTAGE SUPPRESSOR 300 WATTS PEAK POWER 6 VOLTS * SO-8 Package * Peak Power - 400 Watts 8 x 20 mS * ESD Rating: * http://onsemi.com IEC 61000-4-2 (ESD) 15 kV (air) 8 kV (contact) IEC 61000-4-4 (EFT) 40 A (5/50 ns) IEC 61000-4-5 (lightning) 12 (8/20 ms) UL Flammability Rating of 94 V-0 PIN CONFIGURATION AND SCHEMATIC Typical Applications: * * * * * * * * High Speed Communication Line Protection 5.0 V Data and I/O Lines Microprocessor Based Equipment LAN/WAN Equipment Servers Notebook and Desktop PC Instrumentation Peripherals PINS 1-5: CATHODE PINS 6-7: ANODE PIN 8: CATHODE Value Unit Peak Power Dissipation 8 x 20 ms @ TA = 25C (Note 1) Ppk 400 W Peak Pulse Current 8 x 20 ms @ TA = 25C (Note 1) IPP 17 A TJ, Tstg -55 to +150 C TL 260 C Lead Solder Temperature - Maximum 10 Seconds Duration 7 3 6 4 5 1 Symbol Junction and Storage Temperature Range 8 2 8 SO-8 CASE 751 PLASTIC MAXIMUM RATINGS Rating 1 MARKING DIAGRAM SMDA5 LYWW SMDA5 = Device Code L = Location Code Y = Year WW = Work Week 1. Non-repetitive current pulse 8 x 20 mS exponential decay waveform ORDERING INFORMATION Device SMDA05-6R2 Package Shipping SO-8 2500 Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2006 July, 2006 - Rev. 3 1 Publication Order Number: SMDA05-6R2/D SMDA05-6R2 ELECTRICAL CHARACTERISTICS Characteristic Symbol Min Typ Max Unit VBR 6.0 - - V Reverse Leakage Current @ VRWM = 5.0 Volts IR N/A - 20 mA Maximum Clamping Voltage @ IPP = 1.0 A, 8 x 20 mS VC N/A - 9.8 V Maximum Clamping Voltage @ IPP = 5.0 A, 8 x 20 mS VC N/A - 11 V Maximum Peak Pulse Current IPP - - 17 A Reverse Breakdown Voltage @ It = 1.0 mA 100 tr 90 % OF PEAK PULSE CURRENT Ppk, PEAK SURGE POWER (WATTS) 1000 100 10 NOTE: Non-Repetitive Surge. 1 1 10 100 PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAY = 8 ms 80 70 60 HALF VALUE IRSM/2 @ 20 ms 50 40 30 tP 20 10 0 1000 PEAK VALUE IRSM @ 8 ms 0 t, TIME (ms) 20 40 60 t, TIME (ms) Figure 1. Pulse Width Figure 2. 8 x 20 ms Pulse Waveform http://onsemi.com 2 80 SMDA05-6R2 PACKAGE DIMENSIONS SO-8 CASE 751-07 ISSUE AB -X- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. 751-01 THRU 751-06 ARE OBSOLETE. NEW STANDAARD IS 751-07 A 8 5 S B 1 0.25 (0.010) M Y M 4 -Y- K G C N DIM A B C D G H J K M N S X 45 _ SEATING PLANE -Z- H 0.10 (0.004) D 0.25 (0.010) M Z Y S X M J S SOLDERING FOOTPRINT* 1.52 0.060 7.0 0.275 4.0 0.155 0.6 0.024 1.270 0.050 SCALE 6:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 3 MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.33 0.51 1.27 BSC 0.10 0.25 0.19 0.25 0.40 1.27 0_ 8_ 0.25 0.50 5.80 6.20 INCHES MIN MAX 0.189 0.197 0.150 0.157 0.053 0.069 0.013 0.020 0.050 BSC 0.004 0.010 0.007 0.010 0.016 0.050 0_ 8_ 0.010 0.020 0.228 0.244 SMDA05-6R2 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 http://onsemi.com 4 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. SMDA05-6R2/D