ZM4728A to ZM4764A Vishay Semiconductors Zener Diodes Features * Silicon planar power Zener diodes * For use in stablilizing and clipping circuits with high power rating * Standard Zener voltage tolerance is 5 % * These diodes are also available in the DO-41 case with type designation 1N4728A to 1N4764A * AEC-Q101 qualified * Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC * Halogen-free according to IEC 61249-2-21 definition 18315 Mechanical Data Case: MELF DO-213AB (glass) Weight: approx. 135 mg Cathode band color: black Packaging codes/options: GS18/5K per 13" reel (12 mm tape), 10K/box GS08/1.5K per 7" reel (12 mm tape), 12K/box Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Test condition Symbol Value Unit Ptot 1 1) W Zener current (see Table "Characteristics") Power dissipation Note: 1) Valid provided that electrodes are kept at ambient temperature. Thermal Characteristics Tamb = 25 C, unless otherwise specified Parameter Test condition Thermal resistance junction to ambient air Symbol RthJA Value Unit 1) K/W 170 Junction temperature Tj 175 C Storage temperature Tstg - 65 to + 175 C Note: 1) Valid provided that electrodes are kept at ambient temperature. Document Number 85786 Rev. 1.4, 15-Sep-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 ZM4728A to ZM4764A Vishay Semiconductors Electrical Characteristics Part number Nominal Zener voltage 1) Test current VZ at IZT IZT Maximum dynamic impedance ZZT at IZT ZZK at IZK IZK Maximum reverse leakage current IR Surge current 3) Test voltage at TA = 25 C VR IR Maximum regulator current 2) IZM V mA mA A V mA mA ZM4728A 3.3 76 10 400 1 100 1 1380 276 ZM4729A 3.6 69 10 400 1 100 1 1260 252 ZM4730A 3.9 64 9 400 1 50 1 1190 234 ZM4731A 4.3 58 9 400 1 10 1 1070 217 ZM4732A 4.7 53 8 500 1 10 1 970 193 ZM4733A 5.1 49 7 550 1 10 1 890 178 ZM4734A 5.6 45 5 600 1 10 2 810 162 ZM4735A 6.2 41 2 700 1 10 3 730 146 ZM4736A 6.8 37 3.5 700 1 10 4 660 133 ZM4737A 7.5 34 4 700 0.5 10 5 605 121 ZM4738A 8.2 31 4.5 700 0.5 10 6 550 110 ZM4739A 9.1 28 5 700 0.5 10 7 500 100 ZM4740A 10 25 7 700 0.25 10 7.6 454 91 ZM4741A 11 23 8 700 0.25 5 8.4 414 83 ZM4742A 12 21 9 700 0.25 5 9.1 380 76 ZM4743A 13 19 10 700 0.25 5 9.9 344 69 ZM4744A 15 17 14 700 0.25 5 11.4 304 61 ZM4745A 16 15.5 16 700 0.25 5 12.2 285 57 ZM4746A 18 14 20 750 0.25 5 13.7 250 50 ZM4747A 20 12.5 22 750 0.25 5 15.2 225 45 ZM4748A 22 11.5 23 750 0.25 5 16.7 205 41 ZM4749A 24 10.5 25 750 0.25 5 18.2 190 38 ZM4750A 27 9.5 35 750 0.25 5 20.6 170 34 ZM4751A 30 8.5 40 1000 0.25 5 22.8 150 30 ZM4752A 33 7.5 45 1000 0.25 5 25.1 135 27 ZM4753A 36 7 50 1000 0.25 5 27.4 125 25 ZM4754A 39 6.5 60 1000 0.25 5 29.7 115 23 ZM4755A 43 6 70 1500 0.25 5 32.7 110 22 ZM4756A 47 5.5 80 1500 0.25 5 35.8 95 19 ZM4757A 51 5 95 1500 0.25 5 38.8 90 18 ZM4758A 56 4.5 110 2000 0.25 5 42.6 80 16 ZM4759A 62 4 125 2000 0.25 5 47.1 70 14 ZM4760A 68 3.7 150 2000 0.25 5 51.7 65 13 ZM4761A 75 3.3 175 2000 0.25 5 56 60 12 ZM4762A 82 3 200 3000 0.25 5 62.2 55 11 ZM4763A 91 2.8 250 3000 0.25 5 69.2 50 10 ZM4764A 100 2.5 350 3000 0.25 5 76 45 9 Notes: 1) The zener impedance is derived from the 1 kHz AC voltage which results when an AC current having an RMS value equal to 10 % of the zener current (IZT or IZK) is superimposed on IZT or IZK. Zener impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units 2) Valid provided that electrodes are kept at ambient temperature 3) Measured under thermal equilibrium and DC test conditions. www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85786 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.4, 15-Sep-10 ZM4728A to ZM4764A Vishay Semiconductors Typical Characteristics Tamb = 25 C, unless otherwise specified W 1.0 Ptot 0.8 0.6 0.4 0.2 0 18289 0 100 200 C Tamb Figure 1. Admissible Power Dissipation vs. Ambient Temperature Package Dimensions in millimeters (inches): MELF DO-213AB (glass) 2.6 (0.102) 2.4 (0.094) Cathode identification 0.55 (0.022) 5.2 (0.205) 4.8 (0.189) The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 4.00 (0.157) max. 3.00 (0.118) min. min. 1.25 (0.049) 6.50 (0.256) 18317 ref. Document Number 85786 Rev. 1.4, 15-Sep-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1