MSMCGLCE6.5A - MXLSMCGLCE170Ae3, MSMCJLCE6.5A - MXLSMCJLCE170Ae3 Available 1500 Watt Low Capacitance Surface Mount Transient Voltage Suppressor Screening in reference to MIL-PRF-19500 available DESCRIPTION This high-reliability surface mount Transient Voltage Suppressor (TVS) product family includes a rectifier diode in series with and in the opposite direction to the primary TVS protection diode. The circuit being protected sees only the rectifier diode's low 100 pF capacitance. They are available in either a DO215AB (gull-wing) or DO-214AB (J-bend) package and RoHS compliant versions are available. The low capacitance of these TVS devices allows them to be applied to the protection of high-frequency signal and communication lines in inductive switching environments or systems exposed to the secondary effects of lightning per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. They also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar transient capability is required, two of these low capacitance TVS devices may be used in parallel and opposite directions (anti-parallel) for complete ac protection (figure 6). DO-215AB (SMCG) Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * * * * * * Available in standoff voltage range of 6.5 to 170 V. Low capacitance of 100 pF or less. Molding compound flammability rating: UL94V-O. Two different terminations available in C-bend (modified J-bend with DO-214AB) or Gull-wing (DO-215AB). Screening available in reference to MIL-PRF-19500. Refer to High Reliability Up-Screened Plastic Products Portfolio for more details on the screening options. (See part nomenclature for all available options.) RoHS compliant versions available. DO-214AB (SMCJ) Package NOTE: All SMC series are equivalent to prior SMM package identifications. Also available in: Commercial grade SMCG(J)LCE6.5 - SMCG(J)LCE170Ae3 APPLICATIONS / BENEFITS * * * * * * * * 1500 watts peak pulse power at 10/1000 s. Low capacitance for high frequency data line protection to 1 MHz. Protection for aircraft fast data rate lines up to level 5 waveform 4 and level 2 waveform 5A in RTCA/DO-160D (also see MicroNote 130) & ARINC 429 with bit rates of 100 kb/s (per ARINC 429, Part 1, par 2.4.1.1). IEC61000-4-2 ESD 15 kV (air), 8 kV (contact). IEC61000-4-5 (lightning) as further detailed in LCE6.5 thru LCE170A data sheet. T1/E1 line cards. Base stations, WAN & XDSL interfaces. CSU/DSU equipment. Case 1 package (axial-leaded) MLCE6.5 - MLCE170Ae3 MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com RF01002, Rev. C (1/4/13) (c)2013 Microsemi Corporation Page 1 of 7 MSMCGLCE6.5A - MXLSMCGLCE170Ae3, MSMCJLCE6.5A - MXLSMCJLCE170Ae3 MAXIMUM RATINGS @ 25 C unless otherwise stated Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-Lead Peak Pulse Power dissipation @ 25 C (at 10/1000 s, (2) see figures 1, 2, and 3) Clamping Factor @ Full Rated Power @ 50 % Rated Power t clamping (0 volts to V (BR) min.) Rated Average Power Dissipation TL = +50 C Solder Temperature @ 10 s Symbol TJ and TSTG R JL P PP Value -65 to +150 20 1500 Unit C C/W W CF 1.4 1.30 -9 < 5x10 5.0 260 s W o C t clamping P M(AV) TSP Notes: 1. Typical junction to lead (tab) at mounting plane. 2. With a repetition rate of 0.01% or less. When pulse testing, do not pulse in opposite direction (see "application schematics" section herein and figures 5 & 6 for further protection in both directions.) MECHANICAL and PACKAGING * * * * * * * CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0. TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable to MIL-STD-750, method 2026. MARKING: Part number with abbreviated prefix (MCLC6.5A, MCLC6.5Ae3, MCLC33, MCLC33e3, etc.). POLARITY: Cathode indicated by band. TAPE & REEL option: Standard per EIA-481-B with 16 mm tape (add "TR" suffix to part number). Consult factory for quantities. WEIGHT: Approximately 0.25 grams. See Package Dimensions on last page. PART NOMENCLATURE M SM C G LC E 6.5 Reliability Level* M MA MX MXL *(see High Reliability Up-Screened Plastic Products Portfolio) A e3 RoHS Compliance e3 = RoHS Compliant Blank = non-RoHS Compliant +/-5%Tolerance Level Reverse Stand-Off Voltage (see Electrical Characteristics table) Surface Mount Package Encapsulated Plastic Package 1500 W Power Level Low Capacitance Lead Form G = Gull-wing J = J-bend RF01002, Rev. C (1/4/13) (c)2013 Microsemi Corporation Page 2 of 7 MSMCGLCE6.5A - MXLSMCGLCE170Ae3, MSMCJLCE6.5A - MXLSMCJLCE170Ae3 SYMBOLS & DEFINITIONS Definition Symbol I (BR) ID IF Breakdown Current: The current used for measuring breakdown voltage V (BR) . Standby Current: The current at the rated standoff voltage V WM . Forward Current: The forward current dc value, no alternating component. Average Rectified Output Current: The output current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave input and a 180 degree conduction angle. Peak Impulse Current: The peak current during the impulse. Peak Pulse Power: The peak power dissipation resulting from the peak impulse current I PP . Clamping Voltage: The maximum clamping voltage at specified I PP (peak pulse current) at the specified pulse conditions. Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Working Peak Voltage: The maximum peak voltage that can be applied over the operating temperature range. This is also referred to as the standoff voltage. IO I PP P PP VC V (BR) V WM ELECTRICAL CHARACTERISTICS @ 25 C unless otherwise stated Part Number Gull-Wing MSMCGLCE6.5A MSMCGLCE7.0A MSMCGLCE7.5A MSMCGLCE8.0A MSMCGLCE8.5A MSMCGLCE9.0A MSMCGLCE10A MSMCGLCE11A MSMCGLCE12A MSMCGLCE13A MSMCGLCE14A MSMCGLCE15A MSMCGLCE16A MSMCGLCE17A MSMCGLCE18A MSMCGLCE20A MSMCGLCE22A MSMCGLCE24A MSMCGLCE26A MSMCGLCE28A MSMCGLCE30A MSMCGLCE33A MSMCGLCE36A MSMCGLCE40A MSMCGLCE43A MSMCGLCE45A MSMCGLCE48A MSMCGLCE51A MSMCGLCE54A MSMCGLCE58A MSMCGLCE60A MSMCGLCE64A MSMCGLCE70A MSMCGLCE75A MSMCGLCE80A MSMCGLCE90A MSMCGLCE100A MSMCGLCE110A MSMCGLCE120A MSMCGLCE130A MSMCGLCE150A MSMCGLCE160A MSMCGLCE170A J-Bend MSMCJLCE6.5A MSMCJLCE7.0A MSMCJLCE7.5A MSMCJLCE8.0A MSMCJLCE8.5A MSMCJLCE9.0A MSMCJLCE10A MSMCJLCE11A MSMCJLCE12A MSMCJLCE13A MSMCJLCE14A MSMCJLCE15A MSMCJLCE16A MSMCJLCE17A MSMCJLCE18A MSMCJLCE20A MSMCJLCE22A MSMCJLCE24A MSMCJLCE26A MSMCJLCE28A MSMCJLCE30A MSMCJLCE33A MSMCJLCE36A MSMCJLCE40A MSMCJLCE43A MSMCJLCE45A MSMCJLCE48A MSMCJLCE51A MSMCJLCE54A MSMCJLCE58A MSMCJLCE60A MSMCJLCE64A MSMCJLCE70A MSMCJLCE75A MSMCJLCE80A MSMCJLCE90A MSMCJLCE100A MSMCJLCE110A MSMCJLCE120A MSMCJLCE130A MSMCJLCE150A MSMCJLCE160A MSMCJLCE170A Reverse Stand-Off Voltage V WM Volts 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 80 90 100 110 120 130 150 160 170 Breakdown Voltage V (BR) @ I (BR) Volts MIN 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 88.7 100 111 122 133 144 167 178 189 MAX 7.98 8.60 10.2 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 85.0 92.1 98.0 111 123 135 147 159 185 197 209 mA 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Reverse Leakage @V WM ID Maximum Clamping Voltage @I PP VC Maximum Peak Pulse Current I PP @10/1000 Amps A 1000 500 250 100 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Volts 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.5 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 129 146 162 178 193 209 243 259 275 100 100 100 100 100 97 88 82 75 70 65 61 57 54 51 46 42 39 36 33 31 28.1 25.8 23.3 21.6 20.6 19.4 18.2 17.2 16.0 15.5 14.6 13.3 12.4 11.6 10.3 9.3 8.4 7.8 7.2 6.2 5.8 5.4 Maximum Capacitance @ 0 Volts, f = 1 MHz Working Inverse Blocking Voltage V WIB Inverse Blocking Leakage Current I IB Peak Inverse Blocking Voltage V PIB pF 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 90 90 90 90 90 90 90 90 90 90 90 90 90 Volts 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 150 150 150 150 150 150 150 150 150 150 150 300 300 300 300 300 300 300 300 A 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Volts 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 400 400 400 400 400 400 NOTE 1: TVS are normally selected according to the reverse standoff voltage" (V WM ) which should be equal to or greater than the dc or peak operating voltage level. RF01002, Rev. C (1/4/13) (c)2013 Microsemi Corporation Page 3 of 7 MSMCGLCE6.5A - MXLSMCGLCE170Ae3, MSMCJLCE6.5A - MXLSMCJLCE170Ae3 (PPP) - Peak Pulse Power - kW GRAPHS tp - Pulse Time - sec Peak Pulse Power (PPP) or continuous o Power in Percent of 25 C Rating IPP - Peak Pulse Current - % IPP FIGURE 1 Peak Pulse Power vs. Pulse Time Test wave form parameters tr = 10 sec. tp = 1000 sec. o t - Time (msec) TL Lead Temperature C FIGURE 2 Pulse Waveform RF01002, Rev. C (1/4/13) FIGURE 3 Derating Curve (c)2013 Microsemi Corporation Page 4 of 7 MSMCGLCE6.5A - MXLSMCGLCE170Ae3, MSMCJLCE6.5A - MXLSMCJLCE170Ae3 APPLICATION SCHEMATICS The TVS low capacitance device configuration is shown in figure 4. As a further option for unidirectional applications, an additional low capacitance rectifier diode may be used in parallel in the same polarity direction as the TVS as shown in figure 5. In applications where random high voltage transients occur, this will prevent reverse transients from damaging the internal low capacitance rectifier diode and also provide a low voltage conducting direction. The added rectifier diode should be of similar low capacitance and also have a higher reverse voltage rating than the TVS clamping voltage V C . The Microsemi recommended rectifier part number for the application in figure 5 is the "SMBJLCR80" or "SMBGLCR80" depending on the terminal configuration desired. If using two (2) low capacitance TVS devices in anti-parallel for bidirectional applications, this added protective feature for both directions (including the reverse of each rectifier diode) is inherently provided in Figure 6. The unidirectional and bidirectional configurations in figure 5 and 6 will both result in twice the capacitance of figure 4. FIGURE 4 FIGURE 5 FIGURE 6 TVS with internal low capacitance rectifier diode Optional Unidirectional configuration (TVS and separate rectifier diode) in parallel) Optional Bidirectional configuration (two TVS devices in anti-parallel) RF01002, Rev. C (1/4/13) (c)2013 Microsemi Corporation Page 5 of 7 MSMCGLCE6.5A - MXLSMCGLCE170Ae3, MSMCJLCE6.5A - MXLSMCJLCE170Ae3 PACKAGE DIMENSIONS SMCG (DO-215AB) Ltr A B C E F K Dimensions Inch Millimeters Min Max Min Max .115 .121 2.92 3.07 .260 .280 6.60 7.11 .220 .245 5.59 6.22 .077 .110 1.95 2.80 .380 .400 9.65 10.16 .025 .040 0.635 1.016 NOTES: Dimension "E" exceeds the JEDEC outline as shown. Typical Standoff Height: 0.004" - 0.008" (0.1 mm - 0.2 mm). SMCJ (DO-214AB) Ltr A B C D E L Dimensions Inch Millimeters Min Max Min Max .115 .121 2.92 3.07 .260 .280 6.60 7.11 .220 .245 5.59 6.22 .305 .320 7.75 8.13 .077 .110 1.95 2.80 .030 .060 .760 1.52 NOTES: Dimension "E" exceeds the JEDEC outline in height as shown. Typical Standoff Height: 0.004" - 0.008" (0.1 mm - 0.2 mm). RF01002, Rev. C (1/4/13) (c)2013 Microsemi Corporation Page 6 of 7 MSMCGLCE6.5A - MXLSMCGLCE170Ae3, MSMCJLCE6.5A - MXLSMCJLCE170Ae3 PAD LAYOUT RF01002, Rev. C (1/4/13) Ltr A B C SMCG (DO-215AB) Inch Millimeters .510 12.95 .110 2.79 .150 3.81 Ltr A B C SMCJ (DO-214AB) Inch Millimeters .390 9.90 .110 2.79 .150 3.81 (c)2013 Microsemi Corporation Page 7 of 7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microsemi: MXSMCJLCE160A MXLSMCGLCE20A MSMCJLCE40A MXLSMCJLCE18A MSMCJLCE90A MASMCGLCE64A MXLSMCJLCE26Ae3 MXSMCJLCE13Ae3 MASMCGLCE40A MSMCGLCE24A MXLSMCJLCE7.0A MSMCGLCE54Ae3 MSMCGLCE160Ae3 MSMCJLCE14Ae3 MXSMCJLCE90A MXLSMCGLCE12A MXSMCGLCE15Ae3 MXSMCJLCE6.5Ae3 MXSMCJLCE54A MSMCGLCE80A MXSMCGLCE130Ae3 MSMCJLCE100A MXSMCGLCE28A MXSMCGLCE36Ae3 MASMCJLCE70A MSMCJLCE24Ae3 MSMCGLCE14A MSMCGLCE22A MXSMCGLCE16A MASMCJLCE51A MXSMCJLCE90Ae3 MXSMCJLCE8.5Ae3 MXSMCGLCE28Ae3 MXLSMCGLCE15A MXSMCGLCE20Ae3 MXLSMCGLCE80Ae3 MXSMCJLCE9.0Ae3 MSMCJLCE11A MSMCGLCE13Ae3 MSMCGLCE30Ae3 MXLSMCGLCE6.5Ae3 MSMCJLCE70Ae3 MXSMCGLCE6.5A MASMCJLCE100Ae3 MSMCJLCE160Ae3 MASMCGLCE7.0A MXLSMCGLCE24A MASMCGLCE22A MXLSMCGLCE26Ae3 MSMCGLCE17A MSMCGLCE40A MASMCJLCE28Ae3 MXLSMCJLCE36A MXLSMCJLCE33A MASMCJLCE26A MSMCJLCE26A MXSMCJLCE64A MSMCJLCE60A MXLSMCGLCE11A MASMCJLCE15Ae3 MASMCGLCE150Ae3 MSMCJLCE20Ae3 MXSMCJLCE7.5Ae3 MASMCJLCE30A MSMCGLCE36Ae3 MSMCGLCE14Ae3 MXLSMCJLCE17Ae3 MSMCJLCE17A MXSMCJLCE9.0A MASMCGLCE80A MXLSMCJLCE9.0Ae3 MSMCJLCE40Ae3 MXSMCJLCE11A MXSMCJLCE17Ae3 MXSMCGLCE170Ae3 MXLSMCJLCE9.0A MSMCJLCE60Ae3 MXSMCJLCE70Ae3 MXLSMCGLCE26A MASMCGLCE10Ae3 MXSMCJLCE24A MXSMCJLCE7.5A MASMCGLCE17Ae3 MXSMCJLCE17A MXLSMCJLCE100A MASMCJLCE64A MSMCGLCE170A MXLSMCJLCE75A MXLSMCGLCE20Ae3 MXLSMCGLCE16Ae3 MXSMCJLCE18A MASMCJLCE33Ae3 MXSMCGLCE48Ae3 MXLSMCGLCE16A MXSMCGLCE11Ae3 MXLSMCJLCE6.5Ae3 MXLSMCGLCE70Ae3 MASMCJLCE24Ae3 MSMCGLCE160A MXSMCJLCE45Ae3