HK50A PA779-01-01B 19 20 21 DENSEI-LAMBDA SPECIFICATIONS DENSEI-LAMBDA HK50A PA779-01-03B SPECIFICATIONS DENSEI-LAMBDA HK50A SPECIFICATIONS PA779-01-04B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 MODEL ITEMS Nominal Output Voltage Maximum Output Current Maximum Output Power Efficiency (Typ) (*1) Input Voltage Range (*2) Input Current (Typ) (*1) In-rush Current (Typ) (*3) Output Voltage Range Maximum Ripple & Noise Maximum Line Regulation (*4) Maximum Load Regulation (*5) Over Current Protection (*6) Over Voltage Protection (*7) Hold-Up Time (Typ) (*1) Series Operation Operating Temperature (*8) Operating Humidity Storage Temperature Storage Humidity Cooling Temperature Coefficient (*9) Withstand Voltage (*10) 23 24 25 26 27 28 29 Isolation Resistance Vibration Shock Safety Conducted Radio Noise Weight Size (W.H.D) HK50A-9 mm 9V 5.6A 50.4W 80% 85~132VAC(47~440Hz) or 110~175VDC 1.2A at 100VAC 30A at 100VAC 10% 150mV 36mV 72mV 105% ~ 115% to 135% 20ms Possible 0C to +50C(100%), 60C(50%) 30% to 90% RH -30C to +85C 10% to 95% RH Convection Cooled 1%(Typ) at 0C to +50C Input-Chassis , Input-Output : 2kVAC (20mA) Output-Chassis : 500VAC (100mA) for 1min. More than 100M at 25C and 70% RH Output-FG 500VDC 10-55Hz (sweep 1 min) less than 19.6m/s2 X,Y,Z 1 h each Less than 196.1m/s2 Built to meet UL1950,CSA234 & DENAN 280g 31x68x119 (Refer to Outline Drawing) ==NOTES== *1: At 100VAC & Maximum Output Power,Ta = 25 C . *2: For cases where conformance to various safety specs (UL,CSA) are required to be described as 100-120VAC, 50/60Hz on name plate. *3: Typical value on cold start, Ta=25C . *4: From 85 to 132VAC or 110 to 175VDC, constant load. *5: From No load to Full load, constant input voltage. *6: Current limiting with automatic recovery. Avoid to operate over load or dead short for more than 30 seconds. *7: OVP circuit will shut down output, manual reset. *8: At standard mounting. (vertical) *9: Constant input voltage & load. *10: Refer to instruction manual for testing procedure. Standard Mounting