1
Cable Ties and Installation Tooling
Available Styles
PAN-TY® Locking Cable Ties, Locking Lashing Ties, Releasable Ties, Releasable Lashing Ties,
Clamp Ties, Marker and Flag Ties, Winged Push Mount Ties, Push Mount Ties,
Weather Resistant Ties, Polypropylene Ties, Flame Retardant Ties, Nylon 12 Ties, HALAR* Ties,
TEFZEL**
Ties, Fluorescent Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26
DOME-TOP ®
Barb Ty Cable Ties, Clamp Ties, Marker Ties, DURA-TY™ WR Cable Ties,
Heat Stabilized Ties, Winged Push Mount Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-35
Parallel Entry (CONTOUR-TY®
Cable Ties,
BELT-TY™ IN-LINE Cable Ties, IN-LINE Cable Ties) . . . . . . . 36-39
Hook & Loop Cable Ties (TAK-TY®
Hook & Loop Cable Ties, Hook & Loop Strips/Rolls) . . . . . . . . . . . . 40-42
STA-STRAP ® Clamp Ties, Cable Ties, Chassis/Panel Mount Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-45
Specialty Ties (Stud Mounted Heat Stabilized, Releaseable Stud Mounted “Ladder” Cable Ties,
Multiple Loop, Double Hose Clamp, Polyethylene Marker Strap) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-50
PAN-POUCH ™ Telephone Cable Identification Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Cable Tie Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Cable Tie Installation Tools (manual/pneumatic/automatic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-61
Available Materials
Nylon 6.6 Cable Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13, 28, 30-33, 36-38, 43, 47
Heat Stabilized Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 30, 44, 46
Weather Resistant Nylon 6.6 Cable Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-18, 29, 31, 36, 38, 47, 48
Polypropylene Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
Flame Retardant Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Weather Resistant Nylon 12 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
HALAR* and TEFZEL** Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Fluorescent Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Weather Resistant Acetal Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Hook & Loop Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-42
Polyethylene Marker Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Additional Information
Lashing Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 15, 16
Military Cross Reference Aerospace Standard Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Custom Hot Stamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Selecting the Proper Cable Tie Material for Your Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Material Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Weathering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65
Flammability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-67
Radiation/Moisture/Temperature/Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Physical Characteristics of Cable Tie Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Chemical Resistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-74
Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-76
Stainless Steel Tie Products
PAN-STEEL ® Stainless Steel Tie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
WAVE-TY™ Superior Grip Standard Steel Tie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Stainless Steel Tie Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Metal Marker Plates/Tags/Marking Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Stainless Steel Strapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Wiring Accessories
Cable Tie Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-107
Wiring Accessories — used without cable ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108-123
Harness Board Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124-129
Communication Cable Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130-133
Selection and Use of Adhesive Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134-136
Abrasion Protection Products (Heat Shrink, Non-Shrink PVC Tubing,
Spiral Wrap, Grommet Edging and Braided Expandable Sleeving) . . . . . . . . . . . . . . . . . . . . . . . . . 139-181
*HALAR is a registered trademark of Solvay Solexis, Inc.
** TEFZ EL is a registered t rademark of E.I . DuPont de Nemo urs Co.
All reference dimensions in this catalog are shown in inches (and millimeters).
Cable Ties/Wiring Accessories Catalog—WW-CTCB03
(replaces SA-101N275C-WC)
Table of Contents
2Most commonly used parts appear in BOLD.
World Leader in Cable Ties and Wiring Accessories
PANDUIT ®
is a leading global producer of cable ties and wiring accessories, offering the
most complete selection of sizes, styles and materials. We continually provide new cable
tie and wiring accessory designs to meet the changing application challenges encountered
by our customers while providing lowest installed costs.
PANDUIT ®
also offers the largest selection of ergonomic cable tie installation tools —
from high speed automatic systems to hand operated tools. So, whatever the need,
PANDUIT ®
has the tool to help lower your total installed cost.
Assured Quality To help assure optimum quality, PANDUIT ®
products are designed
and manufactured to meet applicable international, UL, military and customer standards:
ISO 9001 The International Standards Organization (ISO) establishes worldwide standards for products and
services in recognition of increasing globalization of markets. The ISO program sets up the requirements
for quality assurance systems of these worldwide standards. PANDUIT ®
is registered to ISO 9001, the
most comprehensive model in the standard, meant for companies who design, manufacture, install and
service the products they sell. Registration has been awarded by Underwriters Laboratories (Certificate
No. A2269) after extensive audit of QA systems employed at PANDUIT ®
.
Underwriters Laboratories, Inc. (File E56854)
Most PANDUIT ®
miniature, intermediate, standard, light-heavy and heavy cross-section ties are
Recognized (ZODZ(8)) or Listed in the US and Canada by Underwriters Laboratories (ZODZ(7)) in their
Directory under the category “Wire Positioning Devices.” Natural, pigmented and weather resistant
cable ties are recognized for indoor use at temperatures up to 85 °C (185°F). Weather resistant cable
ties are also UL Listed for outdoor applications. Heat stabilized ties are UL Recognized and Listed for
indoor use at temperatures up to 115°C (239°F).
Aerospace Standard SAE spec AS23190 covers the actual test requirements on cable ties. PANDUIT ®
cable ties, when tested, either meet or exceed the requirements of this specification.
Nuclear Regulatory
Commission
The NRC developed rules and regulations concerning Quality Assurance Criteria for Nuclear Power
Plants or Title 10, Chapter 10, Part 50, Appendix B (10CFR50). PANDUIT ®
Corp. Quality Assurance
program is designed to satisfy the 18 criteria set forth in NRC 10CFR50, Appendix B, Military
Specification AS23190.
Ford Motor Company
PANDUIT ®
has received Q1 certification status from Ford Motor Company. Q1 certification enables all
PANDUIT ®
cable tie manufacturing facilities to approve all initial samples and production shipments of
the parts destined for Ford operations throughout the world.
German (VG)
Military
Lloyd’s Register of
Shipping
RINA Germanischer
Lloyd
Nippon Kaiji
Kyokai
Bureau VeritasDet Norske
Veritas
International Approvals Independent Testing Facilities
KR
QS-9000 is the shorthand name for “Quality System Requirements QS-9000.” It is the common
supplier quality standard for the automotive industry. QS-9000 is based on the 1994 edition of
ISO 9001, but it contains additional requirements that are particular to the automotive industry.
These additions are considered automotive “interpretations” by the ISO community of accreditation
bodies and registrars. Registration has been awarded by Underwriters Laboratories Inc.
(Certificate No. A2269) for PANDUIT ®
cable ties.
QS-9000
Korean Register
of Shipping
Everywh ere you need us!
ISO14001 is a voluntary standard for Environmental Management Systems established by the
International Organization for Standardization. The international standard provides a benchmark for
continual improvement in environmental performance. Business partners can be confident that the
PANDUIT ® manufacturing facilities around the globe are engaged in an on-going process to maximize
value while minimizing impact on global natural resources.
ISO14001
Aerospace Standard AS23190
3
Most commonly used parts appear in BOLD.
Selection Guide
PAN-TY® Cable Ties
This line offers the largest selection of styles,
materials, and sizes. The ties are available in
nylon 6.6, nylon 12, polypropylene, HALAR*
and TEFZEL** material. Available in sizes from
.60" (15mm) maximum bundle diameter up to
13" (330mm) maximum bundle diameter.
All are self-locking and many sizes are
available in both releasable and non-releasable
types. PAN-TY®
Cable Ties are quickly installed
by hand or with PANDUIT®
installation tools.
These cable ties provide consistent performance
and reliability for those users who prefer a cable tie
with a stainless steel locking barb. They are infinitely
adjustable through their entire bundle range. On
selected popular sizes, the additional length of
DOME-TOP ® Barb Ty Cable Ties provides an
average of 30% more bundle area than other metal
barb cable ties. Available in sizes from .90" (23mm)
maximum bundle diameter up to 9.0" (229mm)
maximum bundle diameter and may be installed by
hand or with PANDUIT ®
installation tools.
*HALAR is a registered trademark of Solvay Solexis, Inc.
** TEFZ EL is a registered t rademark of E.I . DuPont de Nemo urs Co.
Styles of Cable Ties
Parallel Entry Cable Ties
Parallel Entry Ties are comprised of the
CONTOUR-TY®
, BELT-TY™ and IN-LINE Cable Tie
families. CONTOUR-TY ®Cable Tie’s fully enclosed
locking wedge insures consistent strength, lasting
performance and it is available in a new heavy-
standard cross section. BELT-TY™
Cable Ties have
low profile heads which help avoid snags and
reduce overall bundle size. IN-LINE Cable Ties are
exceptional for applications that require conformity
to large bundles. Unique IN-LINE design forms
completely around the bundle, increasing the
contact area. Serrations on the side of the head
assure positive grip during threading of the tie and
increases installation speed.
DOME-TOP ® Barb Ty Cable Ties
DURA-TY™
is a heavy-duty cable tie that is
ideal for all outdoor applications requiring
high strength and longer life. The acetal
strap and head provides excellent UV
light resistance and high tensile strength.
The smooth, rounded edges on the head
and body do not irritate the hands. The
ties are easy to install. Available in
standard lengths or dispenser rolls for
easy, cut to length convenience in custom
applications.
DURA-TY™
Cable Ties
4Most commonly used parts appear in BOLD.
Styles of Cable Ties
Specialty Ties
PANDUIT ®
continually develops new
products to help solve the unique
application problems of our customers.
One of these products is the polyethylene
cable marker strap that is used for
identifying telephone and fiber optic cable,
which typifies the design/manufacturing
capability of PANDUIT ®
to respond to
these special needs.
Stainless Steel Ties and Strapping
Underground, underwater, indoors,
outdoors — however hostile the
environment — PANDUIT ®
Stainless Steel
Ties and Strapping fasten and identify
components and cables quickly and easily.
Stainless steel ties stand up to most
chemicals, to nuclear and ultraviolet
radiation, to seawater and direct burial in
any soil, and to temperature extremes from
-112°F to 1700°F (-80°C to 925°C).
TAK-TY® Hook & Loop Cable Ties
PANDUIT ®
TAK-TY®
Hook & Loop Cable Ties
are ideal for applications that require
frequent cabling moves, adds and changes.
They can be used to secure a wide variety
of various sizes of cable bundles. Wide color
choice allows for quick and easy color
coding of separate cable bundles.
Selection Guide (cont.)
STA-STRAP ® Cable Ties
STA-STRAP ®
Cable Ties offer several unique
features. Harness modifications during
assembly are made easy as the two-piece
design affords releasability prior to final
tensioning and cut-off. The ties are extremely
flexible and lightweight. They also provide
the lowest thread force in the industry which
reduces operator fatigue. The unique design
allows this cable tie to secure a bundle
directly to a panel without the need for
additional fasteners or mounting devices and
reduces installation costs.
5
Most commonly used parts appear in BOLD.
PAN-TY®
Cable Tie Features/Benefits:
1. One Piece Construction 2. Smooth, Round Edges 3. Tensile Strength
4. Curved Tip 5. Finger Tip Grip 6. More Teeth Per Inch
7. Low Threading Force 8. One Piece Locking Design 9. Material Availability
• Consistent performance
and reliability
• Available in lengths from 2.8"
(71mm) up to 43.3"
(1100mm) to meet a variety
of application requirements
• Orients tip toward head to
speed installation — lowers
installed cost
• Faster initial threading
• Easier to pick up from
flat surfaces
• Lowest threading force of
any one piece cable tie in
the industry
• Reduces operator fatigue
• Thin tapered tip facilitates
threading, easier
initial insertion
• No irritation to installer’s hands,
increases productivity
• Prevents damage to
wire insulation
• Finger tip grip on selected
sizes assures positive grip
during threading of the tie
• Grip prevents tip from
slipping out of cable tie head
during threading
• Multiple locking tooth design
provides greater strength
and reliability
• Available in self locking or
releasable styles for use in
applications where changes
are anticipated
• Exceeds Industry and
Aerospace Standards
SAE (AS23190) standards
• Available in seven loop tensile
strengths from 8 lbs. (36N) up
to 250 lbs. (1112N) to provide
an economical selection
• Greater number of small
uniform teeth provides
tighter bundles
• Because they are flush with
surface they provide proper
wire bundle grip without wire
insulation damage
• Available in a variety of
materials to meet the needs
of special environments
• Properly selected ties can be
used indoors or outdoors
with assurance of long
lasting performance
PAN-TY®
Cable Ties
6Most commonly used parts appear in BOLD.
STANDARD CROSS SECTION
PLT1S-C 4.8
(122)
.190
(4.8)
.052
(1.3)
.220
(5.6)
.316
(8.0)
1.00
(25)
50
(222)
GTS, GS2B, GTH,
GS4H, PTS,
PPTS, STS2
or STH2
100 1000 1000 25000
PLT1.5S-C 6.2
(157)
1.50
(38)
100 1000 1000 25000
PLT2S-C 7.4
(188)
1.88
(48)
100 1000 1000 10000
PLT2.5S-C 9.8
(249)
.337
(8.6)
2.50
(64)
100 1000 1000 10000
PLT3S-C 11.5
(292)
3.00
(76)
100 1000 1000 10000
PLT4S-C 14.5
(368)
4.00
(102)
100 1000 1000 5000
PLT4.5S-C 15.5
(394)
4.50
(114)
100 1000 1000 5000
PLT5S-C 17.5
(445)
5.00
(127)
100 500 1000 5000
PAN-TY® Nylon 6.6
Locking Cable Ties —
Curved Tip
These versatile fasteners can be used in countless applications
wherever you need to bundle wire, cable, or hose. They tie bundle
diameters up to 13" (330mm), they also can be joined together for
even larger diameters. They have a minimum loop tensile strength
from 8 lbs. (36N) to 250 lbs. (1112N). Colors are available for
specific color-coding applications (see pages 24-26).
SUBMINIATURE AND MINIATURE CROSS SECTION
Part
Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
PLT.6SM-C 2.8
(71)
.070
(1.8)
.030
(.8)
.095
(2.4)
.125
(3.2)
.60
(15)
8
(36)
GTS, PTS 100 1000 1000 50000
PLT.7M-C 3.1
(79)
.090
(2.3)
.032
(.8)
.115
(2.9)
.180
(4.6)
.68
(17)
18
(80)
GTS, GS2B, PTS,
PPTS or STS2
100 1000 1000 50000
PLT1M-C 3.9
(99)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.87
(22)
100 1000 1000 50000
PLT1.5M-C 5.6
(142)
1.25
(32)
100 1000 1000 50000
PLT2M-C 8.0
(203)
2.00
(51)
100 1000 1000 25000
INTERMEDIATE CROSS SECTION
PLT1.5I-C 5.6
(142) .142
(3.6)
.045
(1.1)
.180
(4.6)
.240
(6.1)
1.38
(35)
40
(178)
GTS, GS2B, PTS,
PPTS or STS2
100 1000 1000 25000
PLT2I-C 8.0
(203)
2.00
(51)
100 1000 1000 25000
PLT2.5I-C 9.7
(246)
.145
(3.7)
.052
(1.3)
.260
(6.6)
2.50
(64)
100 1000 1000 10000
PLT3I-C 11.4
(290)
3.00
(76)
100 1000 1000 10000
PLT4I-C 14.5
(368)
4.00
(102)
100 1000 1000 10000
Nylon 6.6 Locking Cable Ties (PLT Series)
CURVED TIP
E
D
A REF.
B
C
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
Cable Ties for Automatic
Tools See Page 61.
Except PLT.6SM-C
7
Most commonly used parts appear in BOLD.
PAN-TY
® Locking
Lashing Ties
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
EXTRA-HEAVY CROSS SECTION
PLT2EH-C‡ 9.0
(229)
.500
(12.7)
.075
(1.9)
.40
(10.2)
.80
(20.3)
2.00
(51)
250
(1112)
GS4EH, PPTEH
or ST2EH
— — 100 1000
PLT5EH-Q!20.1
(511)
5.00
(127)
25 250 100 1000
PLT6EH-Q!22.2
(564)
6.00
(152)
25 250 100 1000
PLT8EH-C‡ 28.3
(719)
.085
(2.2)
8.00
(203)
— — 100 1000
PLT10EH-C‡ 34.2
(869)
10.00
(254)
— — 100 500
PLT12EH-C‡ 40.1
(1019)
12.00
(305)
— — 100 500
Nylon 6.6 Locking Cable Ties (PLT Series)
Part
Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Te n s il e
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
LIGHT-HEAVY CROSS SECTION
PLT6LH-L 21.9
(556)
.300
(7.6)
.075
(1.9)
.325
(8.3)
.480
(12.2)
6.00
(152)
120
(534)
GTH, GS4H,
GS4EH
PPTEH, ST2EH
or STH2
50 500 100 2000
PLT7LH-L 24.7
(627)
7.00
(178)
50 500 100 2000
PLT8LH-L 27.6
(701)
8.00
(203)
50 500 100 2000
PLT9LH-L 30.5
(775)
9.00
(229)
50 500 100 1000
PLT10LH-L 34.3
(871)
10.31
(262)
50 1000 100 1000
HEAVY CROSS SECTION
PLT2H-L 8.1
(206)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
2.00
(51)
120
(534)
GTH, GS4H,
GS4EH
PPTEH, ST2EH
or STH2
50 500 250 2500
PLT2.5H-L 9.8
(251)
2.50
(64)
50 500 250 2500
PLT3H-L 11.4
(290)
3.00
(76)
50 500 250 2500
PLT4H-L 14.5
(368)
4.00
(102)
50 500 250 2500
PLT5H-L 17.7
(450)
.350
(8.9)
.078
(2.0)
.340
(8.6)
.560
(14.2)
5.00
(127)
175
(778)
50 500 100 2500
PLT6H-L 20.9
(530)
6.00
(152)
50 500 100 2000
PLT8H-L 30.6
(779)
9.00
(229)
50 500 100 1000
PLT13H-Q 43.3
(1100)
13.00
(330)
25 500 100 500
Lashing Ties typically are used on heavy duty jobs such as
securing conduit or large cable bundles to permanent structures,
indoors or out. Can be used with MCEH mounting clip
(see page 16).
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
!Available without buckle for applications that do not require mounting.
B
E
A REF.
PANDUIT
C
D
STRAIGHT TIP
E
D
A REF.
B
C
Light-Heavy and
Heavy Cross Section
Except PLT5H, 6H,
8H and 13H
8Most commonly used parts appear in BOLD.
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
STANDARD CROSS SECTION
PRT1S-C 4.8
(122)
.190
(4.8)
.052
(1.3)
.219
(5.6)
.316
(8.0)
1.00
(25)
50
(222)
Hand Installed
Only
100 1000 1000 10000
PRT1.5S-C 6.3
(160)
1.50
(38)
100 1000 1000 10000
PRT2S-C 7.4
(188)
1.88
(48)
100 1000 1000 10000
PRT3S-C 11.5
(292) .337
(8.6)
3.00
(76)
100 1000 1000 10000
PRT4S-C 14.5
(368)
4.00
(102)
100 1000 1000 5000
HEAVY CROSS SECTION
PRT2H-L 8.4
(213)
.300
(7.6)
.075
(1.9)
.300
(7.6)
.480
(12.2)
2.00
(51)
80
(356)
Hand Installed
Only
50 500 250 2500
PRT3H-L 11.4
(290)
3.00
(76)
50 500 250 2500
PRT4H-L 14.5
(368)
4.00
(102)
50 500 250 2500
PAN-TY®
Releasable Lashing Ties — Nylon 6.6
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
EXTRA-HEAVY CROSS SECTION
PRT2EH-C‡ 9.0
(229)
.500
(12.7)
.075
(1.9)
.40
(10.2)
.80
(20.3)
2.00
(51)
250
(1112)
Hand Installed
Only
— — 100 1000
PRT5EH-Q 20.1
(510)
5.00
(127)
25 250 100 1000
PRT6EH-Q 22.2
(564)
6.00
(152)
25 250 100 1000
PRT8EH-C‡ 28.3
(719)
.085
(2.2)
8.00
(203)
— — 100 1000
PRT10EH-C‡ 34.2
(869)
10.00
(254)
— — 100 500
PRT12EH-C‡ 40.1
(1019)
12.00
(305)
— — 100 500
PAN-TY®
Releasable
Nylon 6.6 Cable Ties
The extended tab end of releasable cable ties permits easy release and
re-use even after the tie has been pulled up snug by hand. Releasable
ties are particularly useful in applications where changes are anticipated
during development, production or servicing in the field.
Nylon 6.6 Releasable Cable Ties (PRT Series)
B
E
A REF.
PANDUIT
C
D
To release, grasp the head of the cable tie,
deflect release tab and pull the cable tie
away from the bundle.
E
D
B
A REF.
C
Head design for Standard Cross Section Ties
Head design for Heavy Cross Section Ties
STRAIGHT TIP
CURVED TIP
Except Heavy Ties
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
9
Most commonly used parts appear in BOLD.
Nylon 6.6 Locking Clamp Ties (PLC Series)
PAN-TY®
Nylon 6.6
Clamp Ties
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Boss
Height
D
in. (mm)
Boss
Width
E
in. (mm)
Hole
Dia.
F
in. (mm)
Screw
Size
(Metric)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Par t No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLC1M-S4-C 4.3
(110)
.100
(2.5)
.045
(1.2)
.153
(3.9)
.239
(6.1)
.118
(3.0)
#4
(M2.5)
.75
(20)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
100 1000 1000 50000
INTERMEDIATE CROSS SECTION
PLC1.5I-S8-C 6.1
(156)
.135
(3.4)
.045
(1.2)
.166
(4.2)
.335
(8.5)
.172
(4.4)
#8
(M4)
1.25
(32)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
100 1000 1000 25000
STANDARD CROSS SECTION
PLC2S-S6-C 7.9
(201)
.190
(4.8)
.047
(1.2)
.160
(4.1)
.373
(9.5)
.145
(3.7)
#6
(M3) 1.84
(47)
50
(222)
GTS, GS2B, GTH,
GS4H, PTS,
PPTS, STS2
or STH2
100 1000 1000 10000
PLC2S-S10-C 7.9
(201)
.206
(5.2)
#10
(M5)
100 1000 1000 10000
PLC3S-S10-C 12.0
(305) .052
(1.3)
.220
(5.6)
#10
(M5)
3.00
(76)
100 1000 1000 5000
PLC4S-S10-C 15.0
(381)
#10
(M5)
4.00
(102)
100 1000 1000 5000
HEAVY CROSS SECTION
PLC2H-S25-L 9.0
(228) .300
(7.6)
.075
(1.9)
.265
(6.7)
.500
(12.7)
.260
(6.6)
1/4
(M6)
2.00
(51) 120
(534)
GTH, GS4H,
GS4EH,PPTEH
STH2 or ST2EH
50 500 250 2500
PLC4H-S25-L 15.1
(384)
4.00
(102)
50 500 250 2500
F
E
B
C
A REF.
D
Clamp ties are used to attach a bundle to another surface
such as a control panel, wall or ceiling using another fastener.
The design allows for bundling before or after screwing clamp
in place.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
10 Most commonly used parts appear in BOLD.
PAN-TY®
Nylon 6.6
Marker and Flag Ties
Marker and Flag Ties fasten and identify bundles at the same time.
They can be marked with PANDUIT ®
Marker Pens or you can use
PANDUIT ®
Custom Hot Stamping Service.
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Write-on
Area
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLF1M-C 4.3
(109)
.098
(2.5)
.045
(1.1)
.154
(3.9)
.180
(4.6)
.31 X .75
(7.9 X 19.1) .87
(22)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
100 1000 1000 25000
PLF1MA-C 5.1
(130)
.76 X 1.04
(19.1 X 26.4)
100 1000 1000 25000
PLF1MB -C 4.0
(101)
.31 X .92
(7.9 X 23.4) .75
(19)
100 1000 1000 25000
PLM1M-C 3.9
(99) .035
(.9)
.26 X .95
(6.6 X 24.1)
100 1000 1000 10000
PLM2M-C 8.0
(203)
2.00
(51)
100 1000 1000 10000
PLM2S
PLM4S
PL2M2S
Marker Ties are also available in weather resistant black nylon for outdoor use. May be marked with PANDUIT ® PX-10 White Marking Pen found on page 105.
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Write-on
Area
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
STANDARD CROSS SECTION
PLM2S-C 7.4
(188)
.185
(4.7)
.052
(1.3)
.220
(5.6)
.320
(8.1)
.44 x .87
(11.1 x 22.1)
1.75
(45)
50
(222)
GT S, GS 2B,
GT H, GS4H ,
PTS, PPTS,
STS2
or STH2
100 1000 500 10000
PLM4S-C 14.6
(371)
.44 x 2.00
(11.1 x 50.8)
4.00
(102)
100 1000 500 5000
PL2M2S-L 7.4
(188)
.87 x 1.07
(22.1 x 27.2)
1.75
(45)
50 500 500 2500
PL3M2S-L 7.4
(188)
.87 x 1.79
(22.1 x 45.5)
1.75
(45)
50 500 500 2500
Custom Hot Stamping Available; See page 52.
Nylon 6.6 Marker and Flag Ties (PLF/PLM Series)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
E
DC
A REF.
B
PLM1M
PLM1M
PLM2M
PLF1M PLF1MB
PLF1MA
PL3M2S
11
Most commonly used parts appear in BOLD.
Winged Nylon 6.6 Push Mount Ties — Locking Style (PLWP)
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Nominal
Hole
Dia.
in. (mm)
Max.
Panel
Thickness
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLWP1M-C 4.3
(109)
.098
(2.5)
.044
(1.1)
.220
(5.6)
.187
(4.7)
.093
(2.4)
.87
(22)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
100 1000 500 5000
INTERMEDIATE CROSS SECTION
PLWP1.5I-C 6.0
(152)
.135
(3.4)
.045
(1.2)
.280
(7.1)
.187
(4.7)
.093
(2.4)
1.25
(32)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
100 1000 500 5000
STANDARD CROSS SECTION
PLWP1S-C 5.2
(132)
.190
(4.8)
.052
(1.3)
.370
(9.4)
.252
(6.4)
.105
(2.7)
1.00
(25)
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or
STH2
100 1000 500 5000
PLWP1SA -D‡ 5.1
(130) .187
(4.7)
.093
(2.4)
— — 500 5000
PLWP1SB -D‡ 5.2
(132)
.157
(4.0)
— — 500 5000
PLWP1.5S-D‡ 6.8
(173)
.252
(6.4)
.105
(2.7) 1.50
(38)
— — 500 5000
PLWP1.5SA-D‡ 6.7
(170)
.187
(4.7)
.093
(2.4)
— — 500 5000
PLWP2S-C 7.8
(198)
.252
(6.4)
.105
(2.7) 1.75
(45)
100 1000 500 5000
PLWP2SA -D‡ 7.7
(196) .187
(4.7)
.093
(2.4)
— — 500 5000
PLWP2SB -D‡ 7.8
(198)
.157
(4.0)
1.75
(45)
— — 500 5000
HEAVY CROSS SECTION
PLWP2H-TL‡ 8.9
(226) .300
(7.6)
.075
(1.9)
.370
(9.4)
.266
(6.8)
.105
(2.7)
2.00
(51) 120
(534)
GTH, GS4H,
STH2 or
PPTEH
— — 250 2500
PLWP3H-TL‡ 12.0
(305)
3.00
(76)
— — 250 2500
Winged Nylon 6.6 Push Mount Ties — Releasable Style (PRWP)
STANDARD CROSS SECTION
PRWP1S-C 5.2