43.18mm [1.700"] 43.18mm [1.700"] Top View 2.54mm typ. [0.100"] 1 5 3 25.40mm [1.00"] assembled 12.70mm [0.50"] assembled 2 4 Side View 1 Substrate: 1.59mm 0.18mm [0.0625" 0.007"] FR4/G10 or equivalent high temp material. 17m [1/2 oz.] Cu clad. SnPb plating. 2 Pins: material- Brass Alloy 360 1/2 hard; finish0.25m [10"] Au over 1.27m [50"] Ni (min.). Description: CARRIER ADAPTOR: 68 position PLCC socket with test points to 68 position PLCC socket plug. 3 Pins: shell material- Brass Alloy 360 1/2 hard; finish- 0.25m [10"] Au over 1.27m [50"] Ni (min.). Contact material- BeCu; finish 0.25m [10"] Au over 2.54m [100"] Ni (min. ). 4 Leads: material- BeCu Alloy 194; plating- 60/40 SnPb 3.80-10.16m [150-400"]. 5 Test points: material- Phosphor Bronze; plating- Sn over 1.27m [50"] Ni. Gold flash on contact end. Tolerances: diameters 0.03mm [0.001"], PCB perimeters 0.13mm [0.005"], PCB thicknesses 0.18mm [0.007"], pitches (from true position) 0.08mm [0.003"], all other tolerances 0.13mm [0.005"] unless stated otherwise. CA-PLCC68-D-P-T-01 Drawing (c) 1998 IRONWOOD ELECTRONICS, INC. PO BOX 21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: Released Scale 2:1 Rev: B Drawing: P. Reed Date: 5/15/98 File: CA-PLCC068-D-P-T-01 Dwg Modified: 2/28/00