43.18mm
[1.700"]
43.18mm
[1.700"]
25.40mm [1.0 0"] assemb le d 12.70mm [0.5 0"] assemb le d
2.54mm typ.
[0.100"]
Side View
Top View
Status: Rel eased
Drawing : P. Ree d
Scale 2:1 Rev: B
Date: 5/15/98
Modified: 2/28/00
File: CA-PLCC068-D-P-T-01 Dwg
CA-PLCC68-D-P-T-01 Drawing
Description: CARRIER ADAPTOR:
68 position PLCC socket with test points to 68 position PLCC socket plug.
3
2
5
4
1
© 1998 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: (651) 452-8100
www.ironwoodelectronics.com
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true
position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise.
Pins: material- Brass Alloy 360 1/2 hard; finish-
0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.).
Pins: shell material- Brass Alloy 360 1/2 hard;
finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni
(min.). Contact material- BeCu; finish 0.25µm
[10µ"] Au over 2.54µm [100µ"] Ni (min. ).
3
2
Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"]
FR4/G10 or equivalent high temp material. 17µm [1/2
oz.] Cu clad. SnPb plating.
Leads: material- BeCu Alloy 194; plating- 60/40
SnPb 3.80-10.16µm [150-400µ"].
Test points: material- Phosphor Bronze; plating- Sn
over 1.27µm [50µ"] Ni. Gold flash on contact end.
5
4
1
