V i s h ay I n terte c h n o l o g y, I n c . 19 Rectifiers - Worldwide Leader in Power Rectifiers AND TEC O L OGY INNOVAT I N HN Rectifiers O 62-2012 Featured Products * * * * * Bridge Rectifiers Fast Recovery Rectifiers Schottky Rectifiers Standard Rectifiers Ultrafast Recovery Rectifiers Resources * For technical support, contact Rectifiers@vishay.com * For more information, contact DiodesAmericas@vishay.com, DiodesEurope@vishay.com, and DiodesAsia@vishay.com One of the World's Largest Manufacturers of Discrete Semiconductors and Passive Components selector guide 1/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . 19 Rectifiers - Worldwide Leader in Power Rectifiers AND TEC O L OGY INNOVAT I N HN Rectifiers O 62-2012 TABLE OF CONTENTS Featured Product Introduction............................................................................................................................ 03 Schottky Rectifiers.............................................................................................................................................. 07 * TMBS(R) (Trench MOS Barrier Schottky) Rectifiers...................................................................................... 12 * High Performance Schottky Rectifiers....................................................................................................... 19 -- HPS GEN 5.0 (HPS GEN 5.0 Tj = 175 C - Submicron Trench Technology)......................................... 19 -- HPS GEN 3.x (Planar Technology)........................................................................................................ 20 -- HPS GEN 2.x (Planar Technology)........................................................................................................ 21 Ultrafast Recovery Rectifiers............................................................................................................................... 32 * FRED Pt(R) (Fast Recovery Epitaxial Diodes)................................................................................................ 36 * HEXFRED(R). ................................................................................................................................................ 44 * Ultrafast Avalanche Rated Sinterglass Diodes........................................................................................... 47 Standard and Fast Recovery Rectifiers............................................................................................................... 49 * Standard Rectifiers..................................................................................................................................... 49 * Standard Avalanche Rated Sinterglass Diodes.......................................................................................... 51 * High-Voltage Standard Recovery Diodes - Plastics.................................................................................. 52 * ESD Capability Rectifiers............................................................................................................................ 54 * Fast Recovery Rectifiers............................................................................................................................. 55 * Fast Soft Recovery Rectifiers..................................................................................................................... 57 * Fast Avalanche Rated Sinterglass Diodes.................................................................................................. 60 Bridge Rectifiers.................................................................................................................................................. 62 Rectifier Packages.............................................................................................................................................. 67 Sample Package Construction............................................................................................................................ 68 selector guide 2/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Featured Product Information N HN Rectifiers O 19 62-2012 New Product - TMBS(R) Rectifiers - Worldwide Leader in Power Rectifiers Industry's First Commercial TMBS(R) Vishay General Semiconductor Trench MOS Barrier Schottky Rectifier Series (R)Vishay's patented Barrier Schottky (TMBS ) rectifiers Industry's First Commercial TMBSTrench MOS are available with seven voltage ratings from 45 V to 200 V Trench MOS Barrier Schottky Rectifier Series and several different package options to serve a wide range (R) TO-277A TO-277A(SMPC) (SMPC) TO-262AA ITO-220AC ITO-220AC TO-3PW of system requirements. TMBS offers several advantages over The TMBS(R) series is Vishay General Semiconductor's planar Schottky As operating moves to 45 V patented new Trenchrectifiers. MOS Barrier Schottkyvoltage rectifier (R) and above, planar Schottky rectifiers tend to lose product series. TMBS products are optimized with their advantage of ratings fast switching speeds forward voltage power selections from and 100 low V, 120 V, 150 V up drop to a substantial degree. system The patented TMBS structure to 200 V for different requirements and in addresses this numerous popular packages. issue by diminishing minority carrier injections to the drift region, thus minimizing stored charges and improving switching speeds. This is a rapid growing new product line with wide rangeForofdetailed productinformation, portfolios please for various application refer to the TMBS section of this (R) data sheets section needs, please refer to the TMBS selector guide or visit the Vishay website for the latest information for more part numbers and specification information, or on available devices. contact one of our VGS regional marketing colleagues for the most updated new parts information. FEATURES TO-263AB TO-262AB ITO-220AB ITO-220AB TO-220AB P600 Axial TMBS offers several advantages over planar Schottky * Patented Trenchvoltages structure rectifiers. As operating move to 100 V and above, rectifiers lose theirV, 150 V, 200 V * planar VoltageSchottky ratings: 45 V, 60 V,tend 80 V,to100 V, 120 advantage of high switching speed and low forward * Improved efficiency in AC/DC SMPS and DC/DC converters voltage drop to a substantial degree. The patented * structure, High power densitydiminishes and low forward TMBS however, minorityvoltage carrier injections to the drift region,options minimizing stored charges * Multiple package and improving switching speed. APPLICATIONS FEATURES * Adaptors for LCD monitors and TVs, mini PCs * Patented Trench structures, voltage ratings: 200 V, * PC and server power supplies 150 V, 120 V, 100 V * AD/DC SMPS DO-214AC (SMA) * Improved efficiency in AC/DC SMPS and DC/DC * DC/DC converters convertors * power Telecom and and server OR-ing * High density low forwarddiodes voltage * Multiple packagejunction options box as a bypass diode for protection * Solar Cell TO-220AB TO-220AC APPLICATIONS DO-214AA (SMB) * Adaptors for LCD monitors/TV, Mini PC * PC/Server power supplies * AC/DC SMPS * DC/DC convertors TO-262AA TO-220AC * Telecom and server OR-ing diodes DO-214AB (SMC) TO-247AD selector guide 3/69 VMN-SG2125-1208 www.vishay.com For technical questions within your region, please contact: Document Number: 89098 14 PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Revision: 30-Jun-08 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Featured Product Information N HN Rectifiers O 19 62-2012 FRED Pt(R) Series 200 V to 600 V, Tj max 175 C: Flexible Ultrafast Platform for Power Supplies and Inverters The Vishay Semiconductors FRED Pt(R) Gen 1 and Gen 2 series of ultrafast diodes offers designers a highly flexible solution that's equally at home In consumer and automotive applications. SMA / SMB / SMC DPAK (TO-252) (rated 4 A to 15 A) With ratings from 200 V to 600 V and from 3 A to 150 A -- unique in the industry -- this series allows designers to increase the efficiency of power supplies with devices designed to minimize conduction and/or switching losses. Their extreme low leakage current at high temperature, careful design of chip terminations, and construction with high-quality materials make FRED Pt the ideal choice for automotive applications as well. FEATURES TO-220AC / TO-220AB / Isolated TO-220AC (rated 8 A to 30 A) * VRRM 200 V to 600 V * Same current (A) rating is available for devices optimized for lowest conduction losses or lowest switching losses -- Lowest Qrr at 125 C -- Lowest VF at IF TO-220FPAC / AB (rated 8 A to 30 A) D2PAK (TO-263) (rated 8 A to 30 A) * Improved efficiency in SMPS * Soft recovery for reduced EMI at high di/dt * Tj (max) 175 C * AEC-Q101 qualified * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. APPLICATIONS I2PAK (TO-262) (rated 8 A to 30 A) * Power factor correction (PFC) for switchmode power supplies in -- Desktop PCs -- Lighting/ballast -- Servers and telecom -- PDP, TVs, LCD, monitors TO-247AC (rated 30 A to 60 A) PowerTab(R) (rated 80 A to 150 A) selector guide -- Game controllers * ECU for fuel injection on diesel/gasoline-fueled systems * Traction control systems * Solar inverters * Freewheeling diode for industrial applications 4/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . I INNOVAT 19 62-2012 New Product - eSMPTM Packages eSMP Flat Type Surface-Mount Vishay General Semiconductor with Space-Saving Footprint (R) Rectifiers - Worldwide Leader in Power Rectifiers O L OGY Featured Product Information AND TEC N HN Rectifiers O New eSMPTM Surface Mount Package Series with The Vishay Semiconductors eSMP flat type surface-mount Unique Wide Bottom Plate Designs and Space-Saving Footprints packages enables higher current density and power efficiency (R) SMP Rectifiers (3.8 mm x 2 mm x 1 mm) TVS (3.8 x 2 x 1) mm with Vishay a uniqueGeneral design that promotes better thermalthe performance Semiconductor developed new and reliability. eSMPTM high current density power efficiency surface mount package series with unique designs for better thermal performance and reliability. FEATURES * SMPC Rectifiers (6.7TVS mm x 4.8 mm x 1.1 mm) (6.7 x 4.8 x 1.1) mm MicroSMP Rectifiers (2.5 mm x 1.3 mm x 0.65 mm) TVS (2.5 x 1.3 x 0.68) mm * * * * Symmetrical Flat Types RTJL SMF MicroSMP SMP SMPC 30 C/W 15 C/W (3.7 mm x 1.8 mm x 0.98 mm) 3 C/W SlimSMA (5.2 mm x 2.6 mm x 0.95 mm) * * Space saving miniature packages: FEATURES -- SMP (3.8 mm x 2 mm x 1 mm) * Space saving miniature packages: (3.8 x 2mm x 1)x mm -- SMP SMPC (6.7 4.8 mm x 1.1 mm) SMPC (6.7 x 4.8 x 1.1) mm -- MicroSMP MicroSMP(2.5 (2.5xmm mm x 0.65 mm) 1.3 xx 1.3 0.65) mm -*- Special SMF (3.7 mmbottom x 1.8 mm 0.98 mm) wide platex design: Greater heat dissipation than other packages of Symmetrical leads similar sizes -- Wave and reflow solderable * Low device height -- SlimSMA (5.2 mm x 2.6 mm x 0.95 mm) * Low thermal resistance Symmetrical leads * AEC-Q101 qualified Special wide bottom plate design enables better heat * Availablethan for other Schottky, ultrafast andsizes standard dissipation packages of similar rectifiers Low device height Low thermal resistance APPLICATIONS AEC-Q101 qualified Efficient and space saving package choice for Halogen-free versions computer, available industrial and mobile telecom, automotive, consumer electronic applications Available for Schottky, ultrafast, and standard rectifiers APPLICATIONS * Telecom * Automotive * Computer * Industrial * Lighting * DC/DC converters * Free wheeling RJM * Mobile consumer electronics MicroSMP 30 C/W * Solar Cell junction box as a bypass diode for protection SMP 15 C/W SMPC 3 C/W SMF 25 C/W SlimSMA 12 C/W selector guide Document Number: 89099 Revision: 27-Aug-08 5/69 For technical questions within your region, please contact: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com VMN-SG2125-1208 www.vishay.com 15 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT Vishay General Semiconductor O L OGY Featured Product Information N HN Rectifiers New Product - PowerBridgeTM O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers PowerBridgeTM Series - Enhanced Power Bridge Rectifiers New isoCink+TM Series 25 A, 20 A, 15 A, 12 A, and 10 A Enhanced Power Bridge Rectifiers 10 A to 25 A (BU series) and 30 A to 45 A (PB series) Vishay's newdensity isoCink+TM power rectifier series gives a spacehome saving, high-current solution for bridge saving enhanced high current bridge (BU)bridge package for switch mode designers power supplies, rectifiers inefficient switchmode power comparable supplies (SMPS), home audio/video equipment, and more. With highly efficient nd audio/video equipments, performance to larger sizeappliances, bridge products in market. performance comparable larger sizerectifiers bridge products, the low heat thermal resistance resistance RTJC(L/A) , reduces heat-sink sizetowith bridge in system (less generated by of power bridge devices reduces size requirements heat products sinks, since less heat needs to be dissipated. Offering a lead pitch and pin layout compatible with y compared to larger size marketfor bridge of similar power performances). the conventional GBU and GSIB-55, isoCink+TM offers the designers the ability to upgrade system power without changing package, lead pitch andlayouts pin layout to conventional GBU package designoftime PCB or heat sinking. A maximum solder saves temperature 275when C/10changing s enables high reliability in manual soldering. ers with increased system power demand (not necessary to change P.C.B. layout and heat sink when er increased). 260 C, 40 s of solder dipping process enables high reliability in manual soldering. APPLICATIONS INCLUDE IONS INCLUDE* Primary rectification circuit of switch mode power supplies and adaptors for desktop PCs, servers, notebook PCs, plasma display (PDP) LCD TVs, and monitors ctification circuit of switch mode powerpanel supplies andTVs, adaptors for desktop PCs, servers, notebook PCs, play panel (PDP) TVs, LCD TVs, and monitors. * Primary rectification circuit of inverter type home appliance as in refrigerator, washing machine, air conditioner and induction heater systemsas in refrigerator, washing machine, air conditioner and ctification circuit of inverter type home appliance heater systems. * Primary rectification circuit in telecom SMPS ctification circuit of switch mode power supplies in telecommunication systems Part Number Description ER ber: 89101 l-08 BU2506 to BU2510 DESCRIPTION 600 thru 1000 V BU2006 to BU2010 25 A single phase bridge rectifier 600 thru 1000 V 20 A single phase bridge rectifier BU1506 to BU1510 600 thru 1000 V 15 A single phase bridge rectifier BU1206 to BU1210 600 thru 1000 V 12 A single phase bridge rectifier BU1006 600 thru 1000toV BU1010 10 A single phase bridge rectifier 600 V to 1000 V Package VF at IF Per Chip, Tj BU 0.87 V typical at 12.5 A, 125 C 25 A single-phase bridge rectifier PACKAGE VF AT IF PER CHIP, TJ 600 V to 1000 V0.87 V typical at 12.5 A, 125 C BU BU 20 A single-phase bridge rectifier 0.85 V typical at 10 A, 125 C BU 600 V to 1000 V 0.85 V typical at 10 A, 125 C BU 15 A single-phase bridge rectifier 0.87 V typical at 7.5 A, 125 C BU 0.87 V typical at 7.5 A, 125 C BU 0.88 V typical at 6 A, 125 C 600 V to 1000 V 12 A single-phase bridge rectifier BU 600 V to 1000 V BU 10BU A single-phase bridge rectifier 0.88 V typical at 5 A, 125 C 0.88 V typical at 6 A, 125 C 0.88 V typical at 5 A, 125 C PB3006 to PB3010 600 V to 1000 V 30 A single-phase bridge rectifier PB 0.97 V typical at 15 A, +125 C PB3506 to PB3510 600 V to 1000 V 35 A single-phase bridge rectifier PB 0.90 V typical at 17.5 A, +125 C PB4006 to PB4010 600 V to 1000 V 40 A single-phase bridge rectifier PB 0.94 V typical at 20 A, +125 C PB5006 to PB5010 600 V to 1000 V 45 A single-phase bridge rectifier PB 0.90 V typical at 22.5 A, +125 C For technical questions within your region, please contact: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com selector guide www.vishay.com 17 6/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers I INNOVAT O L OGY Schottky Rectifiers AND TEC N HN Rectifiers O 19 62-2012 Schottky Rectifiers are the ideal product for high-speed and low power loss applications. Their metalsilicon junctions and majority carrier condition result in extremely fast recovery times (less than 10 ns) and very low forward voltage drops. Vishay's unique sputtered metallization process and ion implanted guardring technology result in a highly reliable Schottky product. We offer our customers the opportunity to select the best device for their applications by providing the flexibility of different barrier heights. IF(AV) (A) Device(1) 0.6 SB020 to SB060 Package Family(3) Plastic Axial Max VF at IF Type V(BR) Range (V) (V) (A) MPG06 20 to 60 0.55 / 0.70 0.6 1.0 1N5817 to 1N5819 Plastic Axial DO-204AL (DO-41) 20 to 40 0.45 to 0.60 1.0 1.0 BYM13-20 to BYM13-60 Plastic SMD DO-213AB (MELF) 20 to 60 0.50 to 0.70 1.0 1.0 MSS1P2L and MSS1P3L Plastic SMD MicroSMP 20 to 30 0.50 1.0 1.0 MSS1P3 and MSS1P4 Plastic SMD MicroSMP 30 to 40 0.55 1.0 1.0 MSS1P5 and MSS1P6 Plastic SMD MicroSMP 50 to 60 0.68 1.0 1.0 SB120 to SB160 Plastic Axial DO-204AL (DO-41) 20 to 60 0.48 to 0.65 1.0 1.0 SB1H90 and SB1H100 Plastic Axial DO-204AL (DO-41) 90 to 100 0.77 1.0 1.0 SGL41-20 to SGL41-60 Plastic SMD DO-213AB (MELF) 20 to 60 0.50 to 0.70 1.0 1.0 SS12 to SS16 Plastic SMD DO-214AC (SMA) 20 to 60 0.50 to 0.75 1.0 1.0 B120 to B160 Plastic SMD DO-214AC (SMA) 20 to 60 0.52 to 0.75 1.0 1.0 1.0 SS1H9 and SS1H10 Plastic SMD DO-214AC (SMA) 90 to 100 0.77 1.0 SS1P3L and SS1P4L Plastic SMD DO-220AA (SMP) 30 to 40 0.45 to 0.48 1.0 1.0 SS1P3 and SS1P4 Plastic SMD DO-220AA (SMP) 30 to 40 0.50 to 0.53 1.0 1.0 SS1P5L and SS1P6L Plastic SMD DO-220AA (SMP) 50 to 60 0.59 1.0 1.1 SL02 Plastic SMD DO-219AB 20 0.42 1.0 1.1 SL03 Plastic SMD DO-219AB 30 0.45 1.0 1.1 SL04 Plastic SMD DO-219AB 40 0.53 1.0 1.5 BYS10-25 to BYS10-45 Plastic SMD DO-214AC (SMA) 25 to 45 0.5 1.0 1.5 BYS11-90 Plastic SMD DO-214AC (SMA) 90 0.75 1.0 1.5 BYS12-90 Plastic SMD DO-214AC (SMA) 90 0.36 / 0.75 0.015 / 1.0 1.5 SL12 and SL13 Plastic SMD DO-214AC (SMA) 20 to 30 0.36 / 0.445 0.1 / 1.0 1.5 SS29 and SS210 Plastic SMD DO-214AA(SMB) 90 to 100 0.75/0.95 1.0/3.0 2.0 SB220 to SB260 Plastic Axial DO-204AC (DO-15) 20 to 60 0.5 / 0.68 2.0 2.0 SB220S to SB260S Plastic Axial DO-204AL (DO-41) 20 to 60 0.55 / 070 2.0 2.0 SB2H90 and SB2H100 Plastic Axial DO-204AC (DO-15) 90 to 100 0.79 2.0 2.0 MSS2P2 and MSS2P3 Plastic SMD MicroSMP 20 to 30 0.6 2.0 2.0 B230LA and B240A Plastic SMD DO-214AC (SMA) 30 to 40 0.50 to 0.55 2.0 2.0 SL22 and SL23 Plastic SMD DO-214AA (SMB) 20 to 30 0.395 / 0.44 1.0 / 2.0 2.0 2.0 SS22 to SS26 Plastic SMD DO-214AA (SMB) 20 to 60 0.50 to 0.70 2.0 SS22S, SS23S and SS24S Plastic SMD DO-214AC (SMA) 20 to 40 0.55 2.0 2.0 SS25S and SS26S Plastic SMD DO-214AC (SMA) 50 to 60 0.75 2.0 2.0 SS2H9 and SS2H10 Plastic SMD DO-214AA (SMB) 90 to 100 0.79 2.0 2.0 SS2P2, SS2P3 and SS2P4 Plastic SMD DO-220AA (SMP) 20 to 40 0.55 2.0 2.0 SS2P2L and SS2P3L Plastic SMD DO-220AA (SMP) 20 to 30 0.5 2.0 2.0 SS2P5 and SS2P6 Plastic SMD DO-220AA (SMP) 50 to 60 0.7 2.0 Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide 3. All Schottky die are planar with oxide passivation 4. 35 V to 45 V product/50 V to 60 V product 7/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . I INNOVAT O L OGY Schottky Rectifiers AND TEC N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Schottky Rectifiers, continued IF(AV) (A) Device(1) 2.0 SS2PH9 and SS2PH10 2.0 SSA23L and SSA24 3.0 B330LA and B340A 3.0 B340LB 3.0 B350A and B360A 3.0 3.0 3.0 Package Type V(BR) Range (V) Plastic SMD DO-220AA (SMP) Plastic SMD DO-214AC (SMA) Plastic SMD Plastic SMD Plastic SMD B350B and B360B 1N5820 to 1N5822 Family(3) Max VF at IF (V) (A) 90 to 100 0.8 2.0 30 to 40 0.45 to 0.49 2.0 DO-214AC (SMA) 30 to 40 0.50 to 0.55 3.0 DO-214AA (SMB) 40 0.45 3.0 DO-214AC (SMA) 50 to 60 0.72 3.0 Plastic SMD DO-214AA (SMB) 50 to 60 0.66 3.0 Plastic Axial DO-201AD 20 to 40 0.475 to 0.525 3.0 SB320 to SB360 Plastic Axial DO-201AD 20 to 60 0.49 to 0.68 3.0 3.0 SB320S to SB360S Plastic Axial DO-204AC (DO-15) 20 to 60 0.50 to 0.70 3.0 3.0 SB3H90 and SB3H100 Plastic Axial DO-201AD 90 to 100 0.8 3.0 3.0 3.0 SS32 to SS36 Plastic SMD DO-214AB (SMC) 20 to 60 0.5 to 0.75 3.0 SS3H9 and SS3H10 Plastic SMD DO-214AB (SMC) 90 to 100 0.8 3.0 3.0 SS3P3 Plastic SMD DO-220AA (SMP) 30 0.58 3.0 3.0 SS3P4 Plastic SMD DO-220AA (SMP) 40 0.6 3.0 3.0 SS3P5 and SS3P6 Plastic SMD DO-220AA (SMP) 50 to 60 0.78 3.0 3.0 SSA33L and SSA34 Plastic SMD DO-214AC (SMA) 30 to 40 0.45 to 0.49 3.0 3.0 SS3P3L and SS3P4L Plastic SMD TO-277A (SMPC) 30 to 40 0.47 3.0 3.0 SS3P5L and SS3P6L Plastic SMD TO-277A (SMPC) 50 to 60 0.60 3.0 4.0 SL42 and SL43 Plastic SMD DO-214AB (SMC) 20 to 30 0.42 / 0.47 4.0 / 8.0 4.0 SL44 Plastic SMD DO-214AB (SMC) 40 0.44 / 0.50 4.0 / 8.0 4.0 SSB43L and SSB44 Plastic SMD DO-214AA (SMB) 30 to 40 0.45 to 0.49 4.0 5.0 SB520 to SB560 Plastic Axial DO-201AD 20 to 60 0.48 to 0.65 5.0 5.0 SB520A to SB560A Plastic Axial DO-201AD 20 to 60 0.50 to 0.70 5.0 5.0 SB5H90 and SB5H100 Plastic Axial DO-201AD 90 to 100 0.8 5.0 5.0 SSC53L and SSC54 Plastic SMD DO-214AB (SMC) 30 to 40 0.45 to 0.49 5.0 5.0 SS5P3 and SS5P4 Plastic SMD TO-277A (SMPC) 30 to 40 0.52 5.0 5.0 SS5P5 and SS5P6 Plastic SMD TO-277A (SMPC) 50 to 60 0.69 5.0 5.0 SS5P9 and SS5P10 Plastic SMD TO-277A (SMPC) 90 to 100 0.88 5.0 6.0 SS6P4C Plastic SMD TO-277A (SMPC) 40 0.65 3.0 7.5 MBR735 to MBR760 Plastic Power Pack TO-220AC 35 to 60 0.84 / 0.75(4) 15.0 / 7.5 7.5 MBRB735 to MBRB760 Power Pack SMD TO-263AB (D2PAK) 35 to 60 0.84 / 0.75(4) 15.0 / 7.5 7.5 MBRF735 to MBRF760 Isolated Power Pack ITO-220AC 35 to 60 0.84 / 0.75(4) 15.0 / 7.5 7.5 MBR7H35 to MBR7H60 Plastic Power Pack TO-220AC 35 to 60 0.63 / 0.73(4) 7.5 7.5 MBRB7H35 to MBRB7H60 Power Pack SMD TO-263AB (D PAK) 35 to 60 0.63 / 0.73 7.5 7.5 MBRF7H35 to MBRF7H60 Isolated Power Pack ITO-220AC 35 to 60 0.63 / 0.73(4) 7.5 8.0 SBL8L40 Plastic Power Pack TO-220AC 40 0.44/0.50 4.0/8.0 8.0 SS8P2L and SS8P3L Plastic SMD TO-277A (SMPC) 20 to 30 0.57 8.0 8.0 SS8PH9 and SS8PH10 Plastic SMD TO-277A (SMPC) 90 to 100 0.9 8.0 8.0 SS8P2CL and SS8P3CL (2) Plastic SMD TO-277A (SMPC) 20 to 30 0.54 4.0 8.0 SS8P3C and SS8P4C Plastic SMD(2) TO-277A (SMPC) 30 to 40 0.58 4.0 (2) 2 Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide (4) 3. All Schottky die are planar with oxide passivation 4. 35 V to 45 V product/50 V to 60 V product 8/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Schottky Rectifiers, continued IF(AV) (A) Device(1) Package Family(3) Type V(BR) Range (V) Max VF at IF (V) (A) 8.0 SS8P5C and SS8P6C Plastic SMD TO-277A (SMPC) 50 to 60 0.70 4.0 10.0 MBR1035 to MBR1060 Plastic Power Pack TO-220AC 35 to 60 0.84 / 0.80(4) 20.0 / 10.0 10.0 MBRB1035 to MBRB1060 Power Pack SMD TO-263AB (D2PAK) 35 to 60 0.84 / 0.80(4) 20.0 / 10.0 10.0 MBRF1035 to MBRF1060 Isolated Power Pack ITO-220AC 35 to 60 0.84 / 0.80(4) 20.0 / 10.0 10.0 MBR10H35 to MBR10H60 Plastic Power Pack TO-220AC 35 to 60 0.63 / 0.71(4) 10.0 10.0 MBRB10H35 to MBRB10H60 Power Pack SMD TO-263AB (D PAK) 35 to 60 (4) 0.63 / 0.71 10.0 10.0 MBRF10H35 to MBRF10H60 Isolated Power Pack ITO-220AC 35 to 60 0.63 / 0.71(4) 10.0 10.0 MBR10H90 and MBR10H100 Plastic Power Pack TO-220AC 90 to 100 0.77 10.0 10.0 MBRB10H90 and MBR10H100 Power Pack SMD T0-263AB (D PAK) 90 to 100 0.77 10.0 10.0 MBRF10H90 and MBR10H100 Isolated Power Pack ITO-220AC 90 to 100 0.77 10.0 5.0 (2) 2 2 10.0 MBR10H90CT and MBR10H100CT Plastic Power Pack TO-220AB 90 to 100 0.76 10.0 MBRB10H90CT and MBRB10H100CT Power Pack SMD(2) T0-263AB (D2PAK) 90 to 100 0.76 5.0 10.0 MBRF10H90CT and MBRF10H100CT Isolated Power Pack(2) ITO-220AB 90 to 100 0.76 5.0 10.0 MBR10H150CT Plastic Power Pack(2) TO-220AB 150 0.88 5.0 10.0 SB10H150CT-1 Plastic Power Pack(2) TO-262AA 150 0.88 5.0 (2) 10.0 MBRF10H150CT Isolated Power Pack ITO-220AB 150 0.88 5.0 10.0 SBL1030 and SBL1040 Plastic Power Pack TO-220AC 30 to 40 0.6 10.0 10.0 SBLB1030 and SBLB1040 Power Pack SMD TO-263AB (D2PAK) 30 to 40 0.6 10.0 (2) 10.0 SBLF1030 and SBLF1040 Isolated Power Pack ITO-220AC 30 to 40 0.6 10.0 10.0 SBL1030CT and SBL1040CT Plastic Power Pack(2) TO-220AB 30 to 40 0.55 5.0 10.0 SBLB1030CT and SBLB1040CT Power Pack SMD TO-263AB (D PAK) 30 to 40 0.55 5.0 10.0 SBLF1030CT and SBLF1040CT Isolated Power Pack(2) ITO-220AB 30 to 40 0.55 5.0 10.0 SBL10L25 Plastic Power Pack TO-220AC 25 0.46 10.0 10.0 SBLB10L25 Power Pack SMD TO-263AB (D PAK) 25 0.46 10.0 10.0 SBLF10L25 Isolated Power Pack ITO-220AC 25 0.46 10.0 10.0 SBL10L30 Plastic Power Pack TO-220AC 30 0.52 10.0 10.0 SBLB10L30 Power Pack SMD TO-263AB (D2PAK) 30 0.52 10.0 10.0 SBLF10L30 Isolated Power Pack ITO-220AC 30 0.52 10.0 10.0 SS10P2CL and SS10P3CL Plastic SMD TO-277A (SMPC) 20 to 30 0.52 5.0 10.0 SS10P3C and SS10P4C Plastic SMD TO-277A (SMPC) 30 to 40 0.53 5.0 10.0 (2) 2 2 10.0 SS10P3 and SS10P4 Plastic SMD TO-277A (SMPC) 30 to 40 0.56 10.0 SS10P5 and SS10P6 Plastic SMD TO-277A (SMPC) 50 to 60 0.67 10.0 10.0 SS10PH45 Plastic SMD TO-277A (SMPC) 45 0.72 10.0 10.0 SS10PH9 and SS10PH10 Plastic SMD TO-277A (SMPC) 90 to 100 0.88 10.0 12.0 SS12P2L and SS12P3L Plastic SMD TO-277A (SMPC) 20 to 30 0.56 12.0 12.0 SS12P4C Plastic SMD TO-277A (SMPC) 40 0.52 6.0 12.0 12.0 SS12P4S Plastic SMD TO-277A (SMPC) 40 0.60 15.0 SB15H45 Plastic Axial P600 45 0.64 15.0 MBR1535CT to MBR1560CT Plastic Power Pack TO-220AB 15.0 MBRB1535CT to MBRB1560CT Power Pack SMD(2) TO-263AB (D2PAK) (2) Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide 15.0 35 to 60 0.84 / 0.75 (4) 15.0 / 7.5 35 to 60 0.84 / 0.75(4) 15.0 / 7.5 3. All Schottky die are planar with oxide passivation 4. 35 V to 45 V product/50 V to 60 V product 9/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Schottky Rectifiers, continued Package IF(AV) (A) Device(1) 15.0 MBRF1535CT to MBRF1560CT Isolated Power Pack 15.0 MBR15H35CT to MBR15H60CT Plastic Power Pack(2) 15.0 MBRB15H35CT to MBRB15H60CT 15.0 MBRF15H35CT to MBRF15H60CT 15.0 SS15P3S 16.0 Max VF at IF Type V(BR) Range (V) (V) ITO-220AB 35 to 60 0.84 / 0.75 TO-220AB 35 to 60 0.63 / 0.73(4) 7.5 Power Pack SMD TO-263AB (D PAK) 35 to 60 0.63 / 0.73 7.5 Isolated Power Pack(2) ITO-220AB 35 to 60 0.63 / 0.73(4) 7.5 Plastic SMD TO-277A (SMPC) 30 0.57 15.0 MBR1635 to MBR1660 Plastic Power Pack TO-220AC 35 to 60 0.63 / 0.75(4) 16.0 16.0 MBRB1635 to MBRB1660 Power Pack SMD TO-263AB (D PAK) 35 to 60 0.63 / 0.75(4) 16.0 16.0 MBRF1635 to MBRF1660 Isolated Power Pack ITO-220AC 35 to 60 0.63 / 0.75(4) 16.0 16.0 MBR16H35 to MBR16H60 Plastic Power Pack TO-220AC 35 to 60 (4) 0.66 / 0.73 16.0 16.0 MBRB16H35 to MBRB16H60 Power Pack SMD TO-263AB (D2PAK) 35 to 60 0.66 / 0.73(4) 16.0 16.0 MBRF16H35 to MBRF16H60 Isolated Power Pack ITO-220AC 35 to 60 0.66 / 0.73 16.0 16.0 SBL1630CT and SBL1640CT Plastic Power Pack(2) TO-220AB 30 to 40 0.55 8.0 16.0 SBLB1630CT and SBLB1640CT Power Pack SMD(2) TO-263AB (D2PAK) 30 to 40 0.55 8.0 Family(3) (2) (2) 2 2 (A) (4) (4) (4) 15.0 / 7.5 16.0 SBLF1630CT and SBLF1640CT Isolated Power Pack ITO-220AB 30 to 40 0.55 8.0 20.0 MBR2035CT to MBR2060CT Plastic Power Pack(2) TO-220AB 35 to 60 0.65 / 0.80(4) 10.0 20.0 MBRB2035CT to MBRB2060CT Power Pack SMD(2) TO-263AB (D2PAK) 35 to 60 0.65 / 0.80(4) 10.0 20.0 MBRF2035CT to MBRF2060CT Isolated Power Pack ITO-220AB 35 to 60 0.65 / 0.80(4) 10.0 20.0 MBR20H35CT to MBR20H60CT Plastic Power Pack(2) TO-220AB 35 to 60 0.63 / 0.71(4) 10.0 20.0 MBRB20H35CT to MBRB20H60CT Power Pack SMD TO-263AB (D PAK) 35 to 60 (4) 0.63 / 0.71 10.0 20.0 MBRF20H35CT to MBRF20H60CT Isolated Power Pack(2 ITO-220AB 35 to 60 0.63 / 0.71(4) 10.0 10.0 (2) (2) (2) 2 20.0 MBR20H90CT and MBR20H100CT Plastic Power Pack TO-220AB 90 to 100 0.77 20.0 MBRB20H90CT and MBRB20H100CT Power Pack SMD(2) TO-263AB (D2PAK) 90 to 100 0.77 10.0 20.0 MBRF20H90CT and MBRF20H100CT Isolated Power Pack(2) ITO-220AB 90 to 100 0.77 10.0 20.0 MBR20H90CTG and MBR20H100CTG Plastic Power Pack(2) TO-220AB 90 to 100 0.85 10.0 20.0 MBR20H150CT Plastic Power Pack(2) TO-220AB 150 0.9 10.0 20.0 SB20H150CT-1 Plastic Power Pack TO-262AA 150 0.9 10.0 20.0 MBRF20H150CT Isolated Power Pack(2) ITO-220AB 150 0.9 10.0 20.0 MBR20H200CT Plastic Power Pack(2) TO-220AB 200 0.88 10.0 20.0 SB20H200CT-1 Power Pack SMD TO-262AA 200 0.88 10.0 20.0 MBRF20H200CT Isolated Power Pack(2) ITO-220AB 200 0.88 10.0 (2) (2) (2) 20.0 M2035S and M2045S Plastic Power Pack TO-220AB 35 to 45 0.7 20.0 20.0 MI2050C to MI2060C Plastic Power Pack(2) TO-262AA 50 to 60 0.74 10.0 20.0 SBL2030CT and SBL2040CT Plastic Power Pack(2) TO-220AB 30 to 40 0.6 10.0 20.0 SBLB2030CT and SBL2040CT Power Pack SMD TO-263AB (D PAK) 30 to 40 0.6 10.0 20.0 SBLF2030CT and SBL2040CT Isolated Power Pack(2) ITO-220AB 30 to 40 0.6 10.0 20.0 SBL2030PT and SBL2040PT Plastic Power Pack(2) TO-247AD (TO-3P) 30 to 40 0.55 10.0 25.0 SBL25L20CT to SBL25L30CT Plastic Power Pack TO-220AB 20 to 30 0.49 12.5 25.0 SBLB25L20CT to SBLB25L30CT Power Pack SMD(2) TO-263AB (D2PAK) 20 to 30 0.49 12.5 25.0 SBLF25L20CT to SBLF25L30CT Isolated Power Pack ITO-220AB 20 to 30 0.49 12.5 30.0 MBR2535CT to MBR2560CT Plastic Power Pack(2) TO-220AB 35 to 60 0.82 / 0.75(4) 30.0 / 15.0 Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide (2) 2 (2) (2) 3. All Schottky die are planar with oxide passivation 4. 35 V to 45 V product/50 V to 60 V product 10/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Schottky Rectifiers, continued Package IF(AV) (A) Device(1) 30.0 MBRB2535CT to MBRB2560CT Power Pack SMD 30.0 MBRF2535CT to MBRF2560CT Isolated Power Pack(2) (V) TO-263AB (D PAK) ITO-220AB Type (2) Max VF at IF V(BR) Range (V) Family(3) 2 (A) 35 to 60 (4) 0.82 / 0.75 30.0 / 15.0 35 to 60 0.82 / 0.75(4) 30.0 / 15.0 (4) 15.0 30.0 MBR25H35CT to MBR25H60CT Plastic Power Pack TO-220AB 35 to 60 0.64 / 0.70 30.0 MBRB25H35CT to MBRB25H60CT Power Pack SMD(2) TO-263AB (D2PAK) 35 to 60 0.64 / 0.70(4) 15.0 30.0 MBRF25H35CT to MBRF25H60CT Isolated Power Pack(2) ITO-220AB 35 to 60 0.64 / 0.70(4) 15.0 30.0 (2) 30.0 MBR3035CT and MBR3045CT Plastic Power Pack TO-220AB 35 to 45 0.76 30.0 MBRB3035CT and MBRB3045CT Power Pack SMD(2) TO-263AB (D2PAK) 35 to 45 0.76 30.0 30.0 MBRF3035CT and MBRF3045CT Isolated Power Pack(2) ITO-220AB 35 to 45 0.76 30.0 30.0 MBR30H35CT to MBR30H60CT Plastic Power Pack(2) TO-220AB 35 to 60 0.62 / 0.68(4) 15.0 30.0 MBRB30H35CT to MBRB30H60CT Power Pack SMD(2) TO-263AB (D2PAK) 35 to 60 0.62 / 0.68(4) 15.0 30.0 MBRF30H35CT to MBRF30H60CT Isolated Power Pack ITO-220AB 35 to 60 0.62 / 0.68 30.0 MBR3035PT to MBR3060PT Plastic Power Pack(2) TO-247AD (TO-3P) 35 to 60 0.76 / 0.75(4) 30.0 / 20.0 30.0 MBR30H35PT to MBR30H60PT Plastic Power Pack(2) TO-247AD (TO-3P) 35 to 60 0.66 / 0.74(4) 20.0 (2) (2) (4) 15.0 30.0 MBR30H90CT and MBR30H100CT Plastic Power Pack TO-220AB 90 to 100 0.82 15.0 30.0 MBRF30H90CT and MBRF30H100CT Isolated Power Pack(2) ITO-220AB 90 to 100 0.82 15.0 30.0 MBRB30H90CT and MBRB30H100CT Power Pack SMD TO-263AB (D PAK) 90 to 100 0.82 15.0 30.0 MBR30H90PT and MBR30H100PT Plastic Power Pack(2) TO-247AD (TO-3P) 90 to 100 0.82 15.0 30.0 MBR30H150CT Plastic Power Pack(2) TO-220AB 150 0.90 15.0 30.0 SB30H150CT-1 Plastic Power Pack 30.0 MBRF30H150CT Isolated Power Pack(2) (2) (2) 2 (2) TO-262AA 150 0.90 15.0 ITO-220AB 150 0.90 15.0 30.0 30.0 M3035S and M3045S Plastic Power Pack TO-220AB 35 to 45 0.70 30.0 MB3035S and MB3045S Power Pack SMD TO-263AB (D2PAK) 35 to 45 0.70 30.0 30.0 MI3035S and MI3045S Plastic Power Pack TO-262AA 35 to 45 0.70 30.0 30.0 M3060C Plastic Power Pack(2) TO-220AB 60 0.72 15.0 30.0 MI3060C Plastic Power Pack(2) TO-262AA 60 0.72 15.0 30.0 MF3060C Isolated Power Pack ITO-220AB 60 0.72 15.0 30.0 M30L40C Plastic Power Pack(2) TO-220AB 40 0.55 15.0 30.0 M30L45C Plastic Power Pack(2) TO-220AB 45 0.60 15.0 30.0 SBL3030PT and SBL3040PT Plastic Power Pack TO-247AD (TO-3P) 30 to 40 0.55 15.0 (2) (2) 30.0 SD241P Plastic Power Pack(2) TO-247AD (TO-3P) 45 0.47 / 0.60 10.0 / 20.0 (125 C) 40.0 MBR4035PT to MBR4060PT Plastic Power Pack(2) TO-247AD (TO-3P) 35 to 60 0.70 / 0.72(4) 20.0 40.0 MBR40H35CT to MBR40H60CT Plastic Power Pack TO-220AB 35 to 60 0.64 / 0.68(4) 20.0 40.0 MBR40H35PT to MBR40H60PT Plastic Power Pack(2) TO-247AD (TO-3P) 35 to 60 0.63 / 0.69(4) 20.0 40.0 SBL4030PT to SBL4040PT Plastic Power Pack(2) TO-247AD (TO-3P) 30 to 40 0.58 20.0 60.0 MBR60100CT Plastic Power Pack(2) TO-220AB 100 0.82 / 1.0 30.0 / 60.0 60.0 M6035C to M6060C Plastic Power Pack(2) TO-220AB 35 to 60 0.61/0.65(4) 30.0 60.0 M6035P to M6060P Plastic Power Pack TO-247AD (TO-3P) 35 to 60 0.60 / 0.64(4) 30.0 (2) Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide (2) 3. All Schottky die are planar with oxide passivation 4. 35 V to 45 V product/50 V to 60 V product 11/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 TMBS(R) ( Trench MOS Barrier Schottky ) Rectifiers IF(AV) (A) Device(1) 2 Package Max VF at IF Type V(BR) Range (V) (V) (A) DO-204AL (DO-41) 200 1.23 2.0 Plastic SMD DO-214AC (SMA) 100 0.70 2.0 Plastic SMD DO-220AA (SMP) 60 0.63 3.0 VSB3200S Plastic Axial DO-204AC (DO-15) 200 1.40 3.0 2 VSB3200 Plastic Axial DO-201AD 200 1.20 3.0 3 VSSA310S Plastic SMD DO-214AC (SMA) 100 0.80 3.0 3.0 Family(3) VSB220S Plastic Axial 2 VSSA210 3 V3P6 2 3 VSSB310 Plastic SMD DO-214AA(SMB) 100 0.7 3 VSSA36S Plastic SMD DO-214AC (SMA) 60 0.63 3.0 3 VSSA3L6S Plastic SMD DO-214AC (SMA) 60 0.58 3.0 3 VSSB3L6S Plastic SMD DO-214AA(SMB) 60 0.59 3.0 4 VSSB410S Plastic SMD DO-214AA(SMB) 100 0.77 4.0 4.0 4 VSSB420S Plastic SMD DO-214AA(SMB) 200 1.9 5 VT5200 Plastic Power Pack TO-220AC 200 1.60 5.0 5 VSSC520S Plastic SMD DO-214AB(SMC) 200 1.7 5.0 5 VFT5200 Isolated Power Pack ITO-220AC 200 1.60 5.0 5 VBT5200 Power Pack SMD TO-263AB (D2PAK) 200 1.60 5.0 5 VIT5200 Plastic Power Pack TO-262AA 200 1.60 5.0 7 VT760 Plastic Power Pack TO-220AC 60 0.80 7.5 7 VFT760 Isolated Power Pack ITO-220AC 60 0.80 7.5 7 VBT760 Power Pack SMD TO-263AB (D2PAK) 60 0.80 7.5 7 VIT760 Plastic Power Pack TO-262AA 60 0.80 7.5 8 V8P10 Plastic SMD TO-277A (SMPC) 100 0.68 8.0 8 V8P12 Plastic SMD TO-277A (SMPC) 120 0.84 8.0 8 V8P20 Plastic SMD TO-277A (SMPC) 200 1.40 8.0 10 V10P10 Plastic SMD TO-277A (SMPC) 100 0.68 10 10 V10P12 Plastic SMD TO-277A (SMPC) 120 0.82 10 10 V10P20 Plastic SMD TO-277A (SMPC) 200 1.34 10 10 V10P45 Plastic SMD TO-277A (SMPC) 45 0.57 10 10 V10P45S Plastic SMD TO-277A (SMPC) 45 0.57 10 10 V10PL45 Plastic SMD TO-277A (SMPC) 45 0.52 MBR1090 and MBR10100 Plastic Power Pack TO-220AC 90 - 100 0.80 10 MBRF1090 and MBRF10100 Isolated Power Pack ITO-220AC 90 - 100 0.80 10 MBRB1090 and MBRB10100 Power Pack SMD TO-263AB (D2PAK) 90 - 100 0.80 10 10 MBR1090CT and MBR10100CT Plastic Power Pack(2) TO-220AB 90 - 100 0.85 5.0 10 MBRF1090CT and MBRF10100CT Isolated Power Pack(2) ITO-220AB 90 - 100 0.85 5.0 VT1060C Plastic Power Pack(2) TO-220AB 60 0.70 5.0 VFT1060C Isolated Power Pack(2) ITO-220AB 60 0.70 5.0 VBT1060C Power Pack SMD TO-263AB (D PAK) 60 0.70 5.0 VIT1060C Plastic Power Pack(2) TO-262AA 60 0.70 5.0 10 10 10 (2) 2 Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide 12/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers TMBS(R), continued IF(AV) (A) Package Device(1) 10 10 10 10 10 10 10 10 12 15 Family(3) Max VF at IF Type V(BR) Range (V) (V) (A) VT1080C Plastic Power Pack TO-220AB 80 0.72 5.0 VFT1080C Isolated Power Pack(2) ITO-220AB 80 0.72 5.0 VBT1080C Power Pack SMD TO-263AB (D PAK) 80 0.72 5.0 VIT1080C Plastic Power Pack(2) TO-262AA 80 0.72 5.0 VT1080S Plastic Power Pack TO-220AB 80 0.81 10 (2) (2) 2 VFT1080S Isolated Power Pack ITO-220AB 80 0.81 10 VBT1080S Power Pack SMD TO-263AB (D2PAK) 80 0.81 10 VIT1080S Plastic Power Pack TO-262AA 80 0.81 10 V10150C Plastic Power Pack TO-220AB 150 1.41 5 VF10150C Isolated Power Pack(2) ITO-220AB 150 1.41 5 VB10150C Power Pack SMD TO-263AB (D PAK) 150 1.41 5 VI10150C Plastic Power Pack(2) TO-262AA 150 1.41 5 V10150S Plastic Power Pack TO-220AB 150 1.2 10 VF10150S Isolated Power Pack ITO-220AB 150 1.2 10 VB10150S Power Pack SMD TO-263AB (D2PAK) 150 1.2 10 (2) (2) 2 VI10150S Plastic Power Pack TO-262AA 150 1.2 10 VT10200C Plastic Power Pack(2) TO-220AB 200 1.60 5.0 VFT10200C Isolated Power Pack(2) ITO-220AB 200 1.60 5.0 VBT10200C Power Pack SMD TO-263AB (D PAK) 200 1.60 5.0 VIT10200C Plastic Power Pack(2) TO-262AA 200 1.60 5.0 (2) 2 VT1045C Plastic Power Pack TO-220AB 45 0.58 5.0 VFT1045C Isolated Power Pack(2) ITO-220AB 45 0.58 5.0 VBT1045C Power Pack SMD(2) TO-263AB (D2PAK) 45 0.58 5.0 VIT1045C (2) Plastic Power Pack TO-262AA 45 0.58 5.0 VT1045CBP Plastic Power Pack(2) TO-220AB 45 0.58 5.0 (2) VFT1045CBP Isolated Power Pack ITO-220AB 45 0.58 5.0 VBT1045CBP Power Pack SMD(2) TO-263AB (D2PAK) 45 0.58 5.0 VT1045BP Plastic Power Pack(2) TO-220AC 45 0.68 10 (2) VFT1045BP Isolated Power Pack ITO-220AC 45 0.68 10 VBT1045BP Power Pack SMD(2) TO-263AB (D2PAK) 45 0.68 10 V12P10 Plastic SMD TO-277A (SMPC) 100 0.70 12 V12P12 Plastic SMD TO-277A (SMPC) 120 0.80 12 V15P45 Plastic SMD TO-277A (SMPC) 45 0.58 15 15 (2) 15 V15P45S Plastic SMD TO-277A (SMPC) 45 0.58 15 VSB1545 Plastic Axial P600 45 0.59 15 15 VSB15L45 Plastic Axial P600 45 0.57 15 MBR2090CT and MBR20100CT Plastic Power Pack(2) TO-220AB 100 0.80 10 MBRF2090CT and MBRF20100CT Isolated Power Pack(2) ITO-220AB 100 0.80 10 MBRB2090CT and MBRB20100CT Power Pack SMD TO-263AB (D PAK) 100 0.80 10 20 (2) 2 Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide 13/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers TMBS(R), continued IF(AV) (A) Package Device(1) Family(3) V(BR) Range (V) Type Max VF at IF (V) (A) 20 VSB2045 Plastic Axial P600 45 0.58 20 20 VSB20L45 Plastic Axial P600 45 0.56 20 VT2045C Plastic Power Pack(2) TO-220AB 45 0.58 10 VFT2045C Isolated Power Pack(2) ITO-220AB 45 0.58 10 VBT2045C Power Pack SMD(2) TO-263AB (D2PAK) 45 0.58 10 VIT2045C Plastic Power Pack(2) TO-262AA 45 0.58 10 VT2045CBP Plastic Power Pack(2) TO-220AB 45 0.58 10 VFT2045CBP Isolated Power Pack(2) ITO-220AB 45 0.58 10 VBT2045CBP Power Pack SMD TO-263AB (D PAK) 45 0.58 10 VT2045BP Plastic Power Pack(2) TO-220AC 45 0.66 20 20 20 20 20 20 20 20 20 20 20 (2) 2 VFT2045BP Isolated Power Pack ITO-220AC 45 0.66 20 VBT2045BP Power Pack SMD(2) TO-263AB (D2PAK) 45 0.66 20 VT2060C Plastic Power Pack(2) TO-220AB 60 0.65 10 (2) VFT2060C Isolated Power Pack ITO-220AB 60 0.65 10 VBT2060C Power Pack SMD(2) TO-263AB (D2PAK) 60 0.65 10 VIT2060C Plastic Power Pack(2) TO-262AA 60 0.65 10 VT2060G Plastic Power Pack(2) TO-220AB 60 0.90 10 VFT2060G Isolated Power Pack(2) ITO-220AB 60 0.90 10 VBT2060G Power Pack SMD TO-263AB (D PAK) 60 0.90 10 VIT2060G Plastic Power Pack(2) TO-262AA 60 0.90 10 10 (2) (2) 2 VT2080C Plastic Power Pack TO-220AB 80 0.81 VFT2080C Isolated Power Pack(2) ITO-220AB 80 0.81 10 VBT2080C Power Pack SMD(2) TO-263AB (D2PAK) 80 0.81 10 VIT2080C Plastic Power Pack(2) TO-262AA 80 0.81 10 VT2080S Plastic Power Pack TO-220AB 80 0.92 20 (2) VFT2080S Isolated Power Pack ITO-220AB 80 0.92 20 VBT2080S Power Pack SMD TO-263AB (D2PAK) 80 0.92 20 VIT2080S Plastic Power Pack TO-262AA 80 0.92 20 V20100C Plastic Power Pack TO-220AB 100 0.79 10 VF20100C Isolated Power Pack(2) ITO-220AB 100 0.79 10 VB20100C Power Pack SMD TO-263AB (D PAK) 100 0.79 10 VI20100C Plastic Power Pack(2) TO-262AA 100 0.79 10 V20100R Plastic Power Pack(2) TO-220AB 100 0.90 10 VF20100R Isolated Power Pack ITO-220AB 100 0.90 10 V20100S Plastic Power Pack TO-220AB 100 0.90 20 VB20100S Power Pack SMD TO-263AB (D2PAK) 100 0.90 20 VF20100S Isolated Power Pack ITO-220AB 100 0.90 20 VI20100S Plastic Power Pack TO-262AA 100 0.90 20 (2) (2) 2 (2) Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide 14/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers TMBS(R), continued IF(AV) (A) 20 20 20 20 20 20 20 20 20 20 Package Device(1) Family(3) Max VF at IF Type V(BR) Range (V) (V) (A) V20100SG Plastic Power Pack TO-220AB 100 1.07 20 VF20100SG Isolated Power Pack ITO-220AB 100 1.07 20 VB20100SG Plastic Power Pack TO-263AB (D PAK) 100 1.07 20 VI20100SG Plastic Power Pack TO-262AA 100 1.07 20 V20120C Plastic Power Pack(2) TO-220AB 120 0.90 10 2 VF20120C Isolated Power Pack ITO-220AB 120 0.90 10 VB20120C Power Pack SMD(2) TO-263AB (D2PAK) 120 0.90 10 VI20120C Plastic Power Pack(2) TO-262AA 120 0.90 10 (2) V20M120C Plastic Power Pack TO-220AB 120 0.91 10 VF20M120C Isolated Power Pack(2) ITO-220AB 120 0.91 10 VB20M120C Power Pack SMD TO-263AB (D PAK) 120 0.91 10 VI20M120C Plastic Power Pack(2) TO-262AA 120 0.91 10 V20120S Plastic Power Pack TO-220AB 120 1.12 20 (2) (2) 2 VF20120S Isolated Power Pack ITO-220AB 120 1.12 20 VB20120S Power Pack SMD TO-263AB (D2PAK) 120 1.12 20 VI20120S Plastic Power Pack TO-262AA 120 1.12 20 V20120SG Plastic Power Pack TO-220AB 120 1.33 20 VF20120SG Isolated Power Pack ITO-220AB 120 1.33 20 VB20120SG Power Pack SMD TO-263AB (D PAK) 120 1.33 20 VI20120SG Plastic Power Pack TO-262AA 120 1.33 20 V20150C Plastic Power Pack(2) TO-220AB 150 1.20 10 VF20150C Isolated Power Pack(2) ITO-220AB 150 1.20 10 VB20150C Power Pack SMD(2) TO-263AB (D2PAK) 150 1.20 10 VI20150C Plastic Power Pack(2) TO-262AA 150 1.20 10 V20150S Plastic Power Pack TO-220AB 150 1.43 20 2 VF20150S Isolated Power Pack ITO-220AB 150 1.43 20 VB20150S Power Pack SMD TO-263AB (D2PAK) 150 1.43 20 VI20150S Plastic Power Pack TO-262AA 150 1.43 20 V20150SG Plastic Power Pack TO-220AB 150 1.60 20 VF20150SG Isolated Power Pack ITO-220AB 150 1.60 20 VB20150SG Power Pack SMD TO-263AB (D PAK) 150 1.60 20 VI20150SG Plastic Power Pack TO-262AA 150 1.60 20 V20200C Plastic Power Pack(2) TO-220AB 200 1.60 10 2 VF20200C Isolated Power Pack ITO-220AB 200 1.60 10 VB20200C Power Pack SMD(2) TO-263AB (D2PAK) 200 1.60 10 VI20200C Plastic Power Pack(2) TO-262AA 200 1.60 10 (2) V20200G Plastic Power Pack TO-220AB 200 1.70 10 VF20200G Isolated Power Pack(2) ITO-220AB 200 1.70 10 VB20200G Power Pack SMD TO-263AB (D PAK) 200 1.70 10 VI20200G Plastic Power Pack(2) TO-262AA 200 1.70 10 (2) (2) 2 Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide 15/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers TMBS(R), continued IF(AV) (A) 30 30 30 30 30 30 30 30 30 30 Package Device(1) Family(3) Max VF at IF Type V(BR) Range (V) (V) (A) VT3045C Plastic Power Pack TO-220AB 45 0.57 15 VFT3045C Isolated Power Pack(2) ITO-220AB 45 0.57 15 VBT3045C Power Pack SMD TO-263AB (D PAK) 45 0.57 15 VIT3045C Plastic Power Pack(2) TO-262AA 45 0.57 15 VT3045CBP Plastic Power Pack(2) TO-220AB 45 0.57 15 (2) (2) 2 VFT3045CBP Isolated Power Pack ITO-220AB 45 0.57 15 VBT3045CBP Power Pack SMD(2) TO-263AB (D2PAK) 45 0.57 15 VT3045BP Plastic Power Pack(2) TO-220AC 45 0.70 30 (2) VFT3045BP Isolated Power Pack ITO-220AC 45 0.70 30 VBT3045BP Power Pack SMD(2) TO-263AB (D2PAK) 45 0.70 30 VT3060C Plastic Power Pack(2) TO-220AB 60 0.70 15 VFT3060C Isolated Power Pack(2) ITO-220AB 60 0.70 15 VBT3060C Power Pack SMD(2) TO-263AB (D2PAK) 60 0.70 15 VIT3060C Plastic Power Pack(2) TO-262AA 60 0.70 15 VT3060G Plastic Power Pack(2) TO-220AB 60 0.73 15 (2) VFT3060G Isolated Power Pack ITO-220AB 60 0.73 15 VBT3060G Power Pack SMD(2) TO-263AB (D2PAK) 60 0.73 15 VIT3060G Plastic Power Pack(2) TO-262AA 60 0.73 15 (2) VT3080C Plastic Power Pack TO-220AB 80 0.82 15 VFT3080C Isolated Power Pack(2) ITO-220AB 80 0.82 15 VBT3080C Power Pack SMD TO-263AB (D PAK) 80 0.82 15 VIT3080C Plastic Power Pack(2) TO-262AA 80 0.82 15 VT3080S Plastic Power Pack TO-220AB 80 0.95 30 VFT3080S Isolated Power Pack ITO-220AB 80 0.95 30 VBT3080S Power Pack SMD TO-263AB (D2PAK) 80 0.95 30 VIT3080S Plastic Power Pack TO-262AA 80 0.95 30 V30100C Plastic Power Pack(2) TO-220AB 100 0.80 15 VF30100C Isolated Power Pack(2) ITO-220AB 100 0.80 15 VB30100C Power Pack SMD TO-263AB (D PAK) 100 0.80 15 VI30100C Plastic Power Pack(2) TO-262AA 100 0.80 15 30 (2) (2) (2) 2 2 V30100S Plastic Power Pack TO-220AB 100 0.91 VF30100S Isolated Power Pack ITO-220AB 100 0.91 30 VB30100S Power Pack SMD TO-263AB (D2PAK) 100 0.91 30 VI30100S Plastic Power Pack TO-262AA 100 0.91 30 V30100SG Plastic Power Pack TO-220AB 120 1.00 30 VF30100SG Isolated Power Pack ITO-220AB 120 1.00 30 VB30100SG Power Pack SMD TO-263AB (D PAK) 120 1.00 30 VI30100SG Plastic Power Pack TO-262AA 120 1.00 30 2 Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide 16/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers TMBS(R), continued IF(AV) (A) 30 30 30 30 30 30 30 40 40 40 40 Package Device(1) Family(3) Max VF at IF Type V(BR) Range (V) (V) (A) V30120C Plastic Power Pack TO-220AB 120 0.97 15 VF30120C Isolated Power Pack(2) ITO-220AB 120 0.97 15 VB30120C Power Pack SMD TO-263AB (D PAK) 120 0.97 15 VI30120C Plastic Power Pack(2) TO-262AA 120 0.97 15 V30M120C Plastic Power Pack(2) TO-220AB 120 0.98 15 (2) (2) 2 VF30M120C Isolated Power Pack ITO-220AB 120 0.98 15 VB30M120C Power Pack SMD(2) TO-263AB (D2PAK) 120 0.98 15 VI30M120C Plastic Power Pack(2) TO-262AA 120 0.98 15 (2) V30120S Plastic Power Pack TO-220AB 120 1.10 30 VF30120S Isolated Power Pack ITO-220AB 120 1.10 30 VB30120S Power Pack SMD TO-263AB (D PAK) 120 1.10 30 VI30120S Plastic Power Pack TO-262AA 120 1.10 30 V30120SG Plastic Power Pack TO-220AB 120 1.28 30 VF30120SG Isolated Power Pack ITO-220AB 120 1.28 30 VB30120SG Power Pack SMD TO-263AB (D2PAK) 120 1.28 30 VI30120SG Plastic Power Pack TO-262AA 120 1.28 30 V30150C Plastic Power Pack(2) TO-220AB 150 1.36 15 VF30150C Isolated Power Pack(2) ITO-220AB 150 1.36 15 VB30150C Power Pack SMD TO-263AB (D PAK) 150 1.36 15 VI30150C Plastic Power Pack(2) TO-262AA 150 1.36 15 15 2 (2) 2 V30200C Plastic Power Pack TO-220AB 200 1.10 VF30200C Isolated Power Pack(2) ITO-220AB 200 1.10 15 VB30200C Power Pack SMD(2) TO-263AB (D2PAK) 200 1.10 15 VI30200C Plastic Power Pack(2) TO-262AA 200 1.10 15 V30100PW Plastic Power Pack(2) TO-3PW 100 0.91 15 20 (2) VT4045C Plastic Power Pack TO-220AB 45 0.58 VFT4045C Isolated Power Pack(2) ITO-220AB 45 0.58 20 VBT4045C Power Pack SMD(2) TO-263AB (D2PAK) 45 0.58 20 VIT4045C Plastic Power Pack(2) TO-262AA 45 0.58 20 VT4045BP Plastic Power Pack(2) TO-220AC 45 0.67 40 (2) VFT4045BP Isolated Power Pack ITO-220AC 45 0.67 40 VBT4045BP Power Pack SMD(2) TO-263AB (D2PAK) 45 0.67 40 V40100C Plastic Power Pack(2) TO-220AB 100 0.73 20 (2) VF40100C Isolated Power Pack ITO-220AB 100 0.73 20 VB40100C Power Pack SMD(2) TO-263AB (D2PAK) 100 0.73 20 VI40100C Plastic Power Pack(2) TO-262AA 100 0.73 20 (2) V40100G Plastic Power Pack TO-220AC 100 0.81 20 VF40100G Isolated Power Pack(2) ITO-220AB 100 0.81 20 VB40100G Power Pack SMD(2) TO-263AB (D2PAK) 100 0.81 20 VI40100G Plastic Power Pack TO-262AA 100 0.81 20 (2) (2) Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide 17/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers TMBS(R), continued IF(AV) (A) Device(1) 40 40 40 Package Max VF at IF Type V(BR) Range (V) (V) (A) V40100K (2) Plastic Power Pack TO-220AB 100 0.82 20 V40120C Plastic Power Pack(2) TO-220AB 120 0.88 20 Family(3) VF40120C Isolated Power Pack ITO-220AB 120 0.88 20 VB40120C Power Pack SMD(2) TO-263AB (D2PAK) 120 0.88 20 VI40120C Plastic Power Pack(2) TO-262AA 120 0.88 20 20 (2) V40M120C Plastic Power Pack TO-220AB 120 0.89 VF40M120C Isolated Power Pack(2) ITO-220AB 120 0.89 20 VB40M120C Power Pack SMD(2) TO-263AB (D2PAK) 120 0.89 20 VI40M120C Plastic Power Pack(2) TO-262AA 120 0.89 20 V40150C Plastic Power Pack(2) TO-220AB 150 1.43 20 (2) VF40150C Isolated Power Pack ITO-220AB 150 1.43 20 VB40150C Power Pack SMD(2) TO-263AB (D2PAK) 150 1.43 20 VI40150C Plastic Power Pack(2) TO-262AA 150 1.43 20 40 V40100PW (2) Plastic Power Pack TO-3PW 100 0.77 20 40 V40100PGW Plastic Power Pack(2) TO-3PW 100 0.85 20 50 V50100PW Plastic Power Pack TO-3PW 100 0.84 25 VT6045C Plastic Power Pack(2) TO-220AB 45 0.64 30 VFT6045C Isolated Power Pack(2) ITO-220AB 45 0.64 30 VBT6045C Power Pack SMD TO-263AB (D PAK) 45 0.64 30 VIT6045C Plastic Power Pack(2) TO-262AA 45 0.64 30 30 40 60 (2) (2) (2) 2 VT6045CBP Plastic Power Pack TO-220AB 45 0.64 VFT6045CBP Isolated Power Pack(2) ITO-220AB 45 0.64 30 VBT6045CBP Power Pack SMD(2) TO-263AB (D2PAK) 45 0.64 30 V60100C Plastic Power Pack(2) TO-220AB 100 0.79 30 VB60100C Power Pack SMD(2) TO-263AB (D2PAK) 100 0.79 30 V60120C Plastic Power Pack(2) TO-220AB 120 0.95 30 VB60120C Plastic Power Pack(2) TO-263AB (D2PAK) 120 0.95 30 60 V60100PW Plastic Power Pack(2) TO-3PW 100 0.86 30 60 V60200PGW (2) Plastic Power Pack TO-3PW 200 1.48 30 80 V80100PW Plastic Power Pack(2) TO-3PW 100 0.84 40 60 60 60 (2) Note: 1. Bold text indicates new product 2. Dual center-tapped device (VF limit at IF is per diode) selector guide 18/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 The Vishay portfolio of Schottky diodes offers the industry's widest range of current and voltage ratings in a broad range of through-hole and surface-mount packages. Addressing every application area where Schottky diodes are used, these high performance devices are built by Vishay on well-established with planar technology as well as on our leading-edge submicron trench technology. Gen 5.0 trench based devices feature a maximum junction temperature of 175 C and voltage ratings of 45 V and 100 V. Gen 2.0 and Gen 3.1 planar technology devices feature 125 C, 150 C, or 175 C maximum junction temperatures and several voltage rating options from 15 V to 150 V. Both device types offer specific advantages based on the final customer application, Including superior efficiency, robust avalanche capability, and the ability to withstand voltage spikes. HPS GEN 5.0 (Submicron Trench Technology) Package V(BR) Range (V) Max VF at IF IF(AV) (A) Device(5) Source(4) 6 VS-6CUT04x I Power Plastic SMD(2)(3)(9) TO-251AA (IPAK) 40 0.49 3 175 6 VS-6CWT04FNx I Power Plastic SMD(2)(3)(9) TO-252AA (DPAK) 40 0.49 3 175 8 VS-8TT100 I Power Plastic Through Hole(1)(8) TO-220AC 100 0.58 8 175 10 VS-MBR10T100 I Power Plastic Through Hole(1)(8) TO-220AC 100 0.68 10 175 (1)(3)(9) TO-251AA (IPAK) 100 0.53 10 175 TO-252AA (DPAK) 100 0.53 10 175 (1)(8) Family Type (V) (A) Tj Max (C) 10 VS-10UT10x I Power Plastic SMD 10 VS-10WT10FNx I Power Plastic SMD(1)(3)(9) 15 VS-15TT100 I Power Plastic Through Hole TO-220AC 100 0.67 15 175 16 VS-16CTT100 I Power Plastic Through Hole(2)(8) TO-220AB 100 0.69 8 175 18 VS-18TT045-F I (1)(8) Power Plastic Through Hole TO-220AC 45 0.50 18 175 20 VS-20TT100 I Power Plastic Through Hole(1)(8) TO-220AB 100 0.67 20 175 20 VS-MBR20T100CT I Power Plastic Through Hole (2)(8) TO-220AB 100 0.80 10 175 20 VS-21TT100 I Power Plastic Through Hole(1)(8) TO-220AC 100 0.68 20 175 (1)(3)(9) TO-251AA (IPAK) 40 0.415 20 175 TO-252AA (DPAK) 40 0.415 20 175 (2)(3)(9) TO-251AA (IPAK) 100 0.615 10 175 TO-252AA (DPAK) 100 0.615 10 175 (2)(8) TO-220AB 45 0.50 15 175 TO-220AB 50 0.50 15 175 20 VS-20UT04x I Power Plastic SMD 20 VS-20WT04FNx I Power Plastic SMD(1)(3)(9) 20 VS-20CUT10x I Power Plastic SMD 20 VS-20CWT10FNx I Power Plastic SMD(2)(3)(9) 30 VS-30CTT045 I Power Plastic Through Hole 30 VS-30CTT050-F I Power Plastic Through Hole(2)(8) 30 VS-30CTT100 I Power Plastic Through Hole TO-220AB 100 0.79 15 175 30 VS-30PT100 I Power Plastic Through Hole(1)(8) TO-247AC (mod) 100 0.64 30 175 30 VS-30CPT100 I Power Plastic Through Hole(2)(8) TO-247AC 100 0.79 15 175 40 VS-43CTT100 I Power Plastic Through Hole (2)(8) TO-220AB 100 0.80 20 175 60 VS-60CPT045 I Power Plastic Through Hole(2)(8) TO-247AC 45 0.50 30 175 40 VS-MBR40H100WT-F I Power Plastic Through Hole (2)(8) TO-247AC 100 0.63 20 175 60 VS-63CPT100 I Power Plastic Through Hole(2)(8) TO-247AC 100 0.76 30 175 Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (2)(8) 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 19/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 HPS GEN 3.x (Planar Technology) Package V(BR) Range (V) Max VF at IF (V) (A) Tj Max (C) SMC 100 0.62 3 175 DO-204AR 60-80-100 0.52 5 175 IF(AV) (A) Device(5) Source(4) 3 30BQ100GPBF I Plastic SMD(1)(3)(9) 5 VS-50SQ100Gx I Plastic Axial(1)(3)(9) 5 VS-50SQ100Gx-M3 I Plastic Axial DO-204AR 60-80-100 0.52 5 175 8 VS-8TQ100GSxPBF I Power Plastic SMD(1)(3)(6) D2PAK 80-100 0.58 8 175 8 VS-8TQ100GPBF I Power Plastic Through Hole(1)(8) TO-220AC 80-100 0.58 8 175 8 VS-8TQ100G-N3 I Power Plastic Through Hole(1)(7) TO-220AC 80-100 0.58 8 175 16 VS-16CTQ100GSxPBF I Power Plastic SMD(2)(3)(6) D2PAK 60-80-100 0.69 8 175 16 VS-16CTQ100GPBF I Power Plastic Through Hole(2)(8) TO-220AB 60-80-100 0.69 8 175 Family Type (1)(3)(7) 16 VS-16CTQ100G-N3 I TO-220AB 60-80-100 0.69 8 175 16 VS-16CTQ100G-1PBF I Power Plastic Through Hole Power Plastic Through Hole(2)(6) TO-262 80-100 0.69 8 175 20 VS-MBRB20100CTGxPBF I Power Plastic SMD(2)(3)(6) D2PAK 100 0.85 10 175 20 VS-MBR20100CTG-1P I Power Plastic Through Hole TO-262 80-100 0.85 10 175 30 VS-30CTQ100GSxPBF I Power Plastic SMD(2)(3)(6) D2-PAK 80-100 0.82 15 175 30 VS-30CTQ100GPBF I Power Plastic Through Hole TO-220AB 80-100 0.82 15 175 30 VS-30CTQ100G-N3 I Power Plastic Through Hole(2)(7) TO-220AB 80-100 0.82 15 175 30 VS-30CTQ100G-1PBF I Power Plastic Through Hole(2)(6) TO-262 80-100 0.82 15 175 30 VS-30CPQ100GPBF I Power Plastic Through Hole(2)(8) TO-247 80-100 0.81 15 175 30 VS-30CPQ100G-N3 I TO-247 80-100 0.81 15 175 40 VS-43CTQ100GSxPBF I Power Plastic SMD(2)(3)(6) D2PAK 80-100 0.81 20 175 40 VS-43CTQ100GPBF I Power Plastic Through Hole(2)(8) TO-220AB 100 0.81 20 175 40 VS-43CTQ100G-N3 I Power Plastic Through Hole(2)(7) TO-220AB 80-100 0.81 20 175 40 VS-43CTQ100G-1PBF I Power Plastic Through Hole(2)(6) TO-262 80-100 0.81 20 175 40 VS-40CPQ100GPBF I Power Plastic Through Hole(2)(8) TO-247 80-100 0.75 20 175 40 VS-40CPQ100G-N3 I TO-247 80-100 0.75 20 175 60 VS-63CTQ100GPBF I TO-220AB 100 0.83 30 175 (2)(7) (2)(6) (2)(8) Power Plastic Through Hole Power Plastic Through Hole (2)(7) (2)(7) Power Plastic Through Hole(2)(8) 60 VS-63CTQ100G-N3 I TO-220AB 100 0.83 30 175 60 VS-63CPQ100GPBF I Power Plastic Through Hole Power Plastic Through Hole(2)(8) TO-247 80-100 0.76 30 175 60 VS-63CPQ100G-N3 I Power Plastic Through Hole(2)(7) TO-247 80-100 0.76 30 175 (2)(7) Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 20/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 HPS GEN 2.x (Planar Technology) IF(AV) (A) Device(5) Source(4) Package Family (3) 1 VS-1N5817x I Plastic Axial 1 VS-1N5817x-M3 I Plastic Axial(1)(3)(6) (1)(3)(9) 1 VS-MBR1100x I Plastic Axial 1 VS-MBR1100x-M3 I Plastic Axial(1)(3)(6) (1)(3)(9) 1 VS-1N5819x I Plastic Axial 1 VS-1N5819x-M3 I Plastic Axial(1)(3)(6) (1)(3)(9) 1 VS-MBR160x I Plastic Axial 1 VS-MBR160x-M3 I Plastic Axial(1)(3)(6) (1)(3)(9) 1 VS-MBRA120PBF I Plastic SMD 1 VS-10MQ040-M3 I Plastic SMD(1)(3)(6) (1)(3)(9) Type V(BR) Range (V) Max VF at IF (V) (A) Tj Max (C) DO-204AL 20 0.45 1 150 DO-204AL 20 0.45 1 150 DO-204AL 100 0.68 1 150 DO-204AL 100 0.68 1 150 DO-204AL 30-40 0.55 1 150 DO-204AL 30-40 0.55 1 150 DO-204AL 50-60 0.65 1 150 DO-204AL 50-60 0.65 1 150 SMA 20 0.35 1 150 SMA 40 0.49 1 150 1 VS-MBRA140PBF I Plastic SMD SMA 40 0.49 1 150 1 VS-10MQ060-M3 I Plastic SMD(1)(3)(6) SMA 60 0.57 1 150 (1)(3)(9) (1)(3)(9) 1 VS-10BQ015PBF I Plastic SMD SMB 15 0.32 1 125 1 VS-MBRS120PBF I Plastic SMD(1)(3)(9) SMB 20 0.35 1 150 1 VS-10BQ030PBF I (1)(3)(9) Plastic SMD SMB 30 0.30 1 150 1 VS-MBRS130LPBF I Plastic SMD (1)(3)(9) SMB 30 0.30 1 125 1 VS-MBRS130PBF I Plastic SMD(1)(3)(9) SMB 30 0.42 1 125 1 VS-10BQ040PBF I (1)(3)(9) Plastic SMD SMB 40 0.49 1 150 1 VS-MBRS140PBF I Plastic SMD(1)(3)(9) SMB 40 0.53 1 150 1 VS-10BQ060PBF I (1)(3)(9) Plastic SMD SMB 60 0.57 1 150 1 VS-10BQ100PBF I Plastic SMD(1)(3)(9) SMB 100 0.62 1 175 (1)(3)(9) SMB 90-100 0.62 1 175 SMA 60 0.63 1.5 150 1 VS-MBRS1100PBF I Plastic SMD 1.5 VS-10MQ060NPBF I Plastic SMD(1)(3)(9) 1.1 VS-11DQ04x I Plastic Axial(1)(3)(9) DO-204AL 30-40 0.50 1 150 1.1 VS-11DQ04x-M3 I Plastic Axial(1)(3)(6) DO-204AL 30-40 0.50 1 150 DO-204AL 50-60 0.53 1 150 DO-204AL 50-60 0.53 1 150 DO-204AL 90-100 0.68 1 150 DO-204AL 90-100 0.68 1 150 1.1 VS-11DQ06x I Plastic Axial 1.1 VS-11DQ06x-M3 I Plastic Axial(1)(3)(6) (1)(3)(9) 1.1 VS-11DQ10x I Plastic Axial 1.1 VS-11DQ10x-M3 I Plastic Axial(1)(3)(6) 1.5 VS-15MQ040-M3 I Plastic SMD SMA 40 0.34 1.5 150 2 VS-21DQ04x I Plastic Axial(1)(3)(9) DO-204AL 40 0.50 2 150 2 VS-21DQ04x-M3 I Plastic Axial(1)(3)(6) DO-204AL 40 0.50 2 150 2 VS-21DQ06x I Plastic Axial(1)(3)(9) DO-204AL 60 0.55 2 150 2 VS-21DQ06x-M3 I Plastic Axial(1)(3)(6) DO-204AL 60 0.55 2 150 (1)(3)(6) Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (1)(3)(9) 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 21/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HPS GEN 2.x (Planar Technology), continued Type V(BR) Range (V) (V) (A) Tj Max (C) Plastic SMD(1)(3)(9) SMB 30 0.37 2 150 I (1)(3)(6) Plastic SMD SMA 40 0.63 2 150 I Plastic SMD(1)(3)(6) SMA 60 0.68 2 150 IF(AV) (A) Device(5) Source(4) 2 VS-20BQ030PBF I 2 VS-20MQ040-M3 2 VS-20MQ060-M3 Package Family (3) Max VF at IF 2 VS-20MQ100-M3 I Plastic SMD SMA 100 0.72 2 150 2.1 VS-10MQ040NPBF I Plastic SMD(1)(3)(9) SMA 40 0.56 1.5 150 2.1 VS-20MQ040PBF I Plastic SMD(1)(3)(9) SMA 40 0.63 2 150 2.1 VS-20MQ060PBF I Plastic SMD(1)(3)(9) SMA 60 0.68 2 150 2.1 VS-10MQ100NPBF I Plastic SMD 2.1 VS-10MQ100-M3 I Plastic SMD(1)(3)(6) 2.1 VS-20MQ100PBF 3 VS-1N5820x 3 3 (1)(3)(6) SMA 100 0.68 1.5 150 SMA 100 0.63 1 150 I Plastic SMD (1)(3)(9) SMA 100 0.72 2 150 I Plastic Axial(1)(3)(9) C-16 20 0.47 3 150 VS-1N5820x-M3 I Plastic Axial C-16 20 0.47 3 150 VS-MBR340x I Plastic Axial(1)(3)(9) DO-204AL 40 0.49 3 150 3 VS-MBR340x-M3 I Plastic Axial(1)(3)(6) DO-204AL 40 0.49 3 150 3 VS-MBR360x I Plastic Axial(1)(3)(9) C-16 50-60 0.64 3 150 3 VS-MBR360x-M3 I Plastic Axial(1)(3)(6) C-16 50-60 0.64 3 150 3 VS-15MQ040NPBF I Plastic SMD(1)(3)(9) SMA 40 0.43 2 150 3 VS-30BQ015-M3 I Plastic SMD(1)(3)(6) SMC 15 0.30 3 125 3 VS-30BQ015PBF I (1)(3)(9) Plastic SMD SMC 15 0.30 3 125 3 VS-MBRS320PBF I Plastic SMD(1)(3)(9) SMC 20 0.36 3 150 3 VS-30MQ040-M3 I (1)(3)(6) Plastic SMD SMA 40 0.46 3 150 3 VS-30BQ040-M3 I Plastic SMD(1)(3)(6) SMC 40 0.43 3 150 3 VS-30BQ040PBF I Plastic SMD(1)(3)(9) SMC 40 0.43 3 150 3 VS-MBRS340PBF I Plastic SMD(1)(3)(9) SMC 40 0.43 3 150 (1)(3)(9) (1)(3)(6) 3 VS-30BQ060-M3 I Plastic SMD SMC 60 0.52 3 150 3 VS-30BQ060PBF I Plastic SMD(1)(3)(9) SMC 60 0.52 3 150 (1)(3)(6) 3 VS-30BQ100-M3 I Plastic SMD SMC 100 0.62 3 175 3 VS-30BQ100PBF I Plastic SMD(1)(3)(9) SMC 100 0.62 3 175 3 VS-MBRS360PBF I Plastic SMD SMC 50-60 0.61 3 150 3 VS-MBRD320xPBF I Power Plastic SMD(1)(3)(9) TO-252AA (DPAK) 20 0.49 3 150 (1)(3)(6) (1)(3)(9) 3 VS-MBRD320x-M3 I Power Plastic SMD TO-252AA (DPAK) 20 0.49 3 150 3 VS-MBRD330xPBF I Power Plastic SMD(1)(3)(9) TO-252AA (DPAK) 30 0.49 3 150 3 VS-MBRD330x-M3 I Power Plastic SMD TO-252AA (DPAK) 30 0.49 3 150 3 VS-MBRD340xPBF I Power Plastic SMD(1)(3)(9) TO-252AA (DPAK) 40 0.49 3 150 Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (1)(3)(6) (1)(3)(6) 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 22/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HPS GEN 2.x (Planar Technology), continued Package IF(AV) (A) Device(5) Source(4) 3 VS-MBRD340x-M3 I 3.3 VS-31DQ04x I Plastic Axial 3.3 VS-31DQ04x-M3 I Plastic Axial(1)(3)(6) Family Power Plastic SMD(1)(3)(6) 3.3 VS-31DQ06x I Plastic Axial VS-31DQ06x-M3 I Plastic Axial(1)(3)(6) I Plastic Axial 3.3 VS-31DQ10x VS-31DQ10x-M3 3.5 VS-30WQ03FNxPBF 3.5 VS-30WQ04FNxPBF (V) (A) Tj Max (C) TO-252AA (DPAK) 40 0.49 3 150 C-16 30-40 0.51 3 150 C-16 30-40 0.51 3 150 C-16 50-60 0.54 3 150 C-16 50-60 0.54 3 150 (1)(3)(9) 3.3 3.3 Type V(BR) Range (V) (3) (1)(3)(9) Max VF at IF C-16 90-100 0.69 3 150 C-16 90-100 0.69 3 150 I Power Plastic SMD (1)(3)(9) TO-252AA (DPAK) 30 0.35 3 150 I Power Plastic SMD(1)(3)(9) TO-252AA (DPAK) 40 0.49 3 150 (1)(3)(9) Plastic Axial(1)(3)(6) 3.5 VS-30WQ04FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 40 0.49 3 150 3.5 VS-30WQ06FNxPBF I Power Plastic SMD(1)(3)(9) TO-252AA (DPAK) 60 0.53 3 150 (1)(3)(6) 3.5 VS-30WQ06FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 60 0.53 3 150 3.5 VS-30WQ10FNxPBF I Power Plastic SMD(1)(3)(9) TO-252AA (DPAK) 100 0.63 3 150 (1)(3)(6) (1)(3)(6) 3.5 VS-30WQ10FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 100 0.63 3 150 3.5 VS-30WQ03FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 30 0.35 3 150 5 VS-50SQ100x I Plastic Axial DO-204AR 60-80-100 0.52 5 175 5 VS-50SQ100x-M3 I Plastic Axial(1)(3)(6) DO-204AR 60-80-100 0.52 5 175 5.5 VS-50WQ03FNxPBF I Power Plastic SMD(1)(3)(9) TO-252AA (DPAK) 30 0.35 5 150 (1)(3)(9) 5.5 VS-50WQ03FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 30 0.35 5 150 5.5 VS-50WQ04FNxPBF I Power Plastic SMD(1)(3)(9) TO-252AA (DPAK) 40 0.44 5 150 (1)(3)(6) 5.5 VS-50WQ04FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 40 0.44 5 150 5.5 VS-50WQ06FNxPBF I Power Plastic SMD(1)(3)(9) TO-252AA (DPAK) 60 0.54 5 150 (1)(3)(6) 5.5 VS-50WQ06FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 60 0.54 5 150 5.5 VS-50WQ10FNxPBF I Power Plastic SMD(1)(3)(9) TO-252AA (DPAK) 100 0.63 5 150 5.5 VS-50WQ10FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 100 0.63 5 150 6 VS-6CWQ03FNxPBF I Power Plastic SMD(2)(3)(9) TO-252AA (DPAK) 30 0.46 6 150 (1)(3)(6) (1)(3)(6) 6 VS-6CWQ03FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 30 0.46 6 150 6 VS-6CWQ04FNxPBF I Power Plastic SMD(2)(3)(9) TO-252AA (DPAK) 40 0.62 6 150 (2)(3)(6) 6 VS-6CWQ04FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 40 0.62 6 150 6 VS-6CWQ06FNxPBF I Power Plastic SMD(2)(3)(9) TO-252AA (DPAK) 60 0.65 3 150 (2)(3)(6) 6 VS-6CWQ06FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 60 0.65 3 150 6 VS-6CWQ10FNxPBF I Power Plastic SMD(2)(3)(9) TO-252AA (DPAK) 100 0.74 6 150 6 VS-6CWQ10FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 100 0.74 6 150 6 VS-MBRD660CTxPBF I Power Plastic SMD(2)(3)(9) TO-252AA (DPAK) 50-60 0.65 3 150 Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (2)(3)(6) (2)(3)(6) 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 23/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HPS GEN 2.x (Planar Technology), continued Package IF(AV) (A) Device(5) Source(4) 6 VS-MBRD660CTx-M3 I Power Plastic SMD(2)(3)(6) TO-252AA (DPAK) 6 VS-6TQ045SxPBF I Power Plastic SMD 6 VS-6TQ045PBF I Power Plastic Through Hole(1)(8) 6 VS-6TQ045-N3 I 7.5 VS-MBRB745xPBF 7.5 Family Type (3) V(BR) Range (V) Max VF at IF (V) (A) Tj Max (C) 50-60 0.65 3 150 2 TO-263AB (D PAK) 35-40-45 0.53 6 175 TO-220AC 35-40-45 0.53 6 175 Power Plastic Through Hole(1)(7) TO-220AC 35-40-45 0.53 6 175 I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 35-40-45 0.57 7.5 150 VS-MBR745PBF I Power Plastic Through Hole(1)(8) TO-220AC 35-40-45 0.57 7.5 150 7.5 VS-MBR745-N3 I Power Plastic Through Hole(1)(7) TO-220AC 35-40-45 0.57 7.5 150 (1)(3)(6) 8 VS-80SQ045x I Plastic Axial DO-204AR 30-35-40-45 0.44 8 175 8 VS-80SQ045x-M3 I Plastic Axial(1)(3)(6) DO-204AR 30-35-40-45 0.44 8 175 8 VS-8TQ100SxPBF I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 80-100 0.58 8 175 8 VS-8TQ100PBF I Power Plastic Through Hole(1)(8) TO-220AC 60-80-100 0.69 8 175 8 VS-8TQ100-N3 I Power Plastic Through Hole(1)(7) TO-220AC 60-80-100 0.69 8 175 9 VS-95SQ015x I Plastic Axial(1)(3)(9) DO-204AR 15 0.30 9 125 9 VS-95SQ015x-M3 I Plastic Axial(1)(3)(6) DO-204AR 15 0.30 9 125 9 VS-90SQ045x I Plastic Axial(1)(3)(9) DO-204AR 30-35-40-45 0.42 9 150 Plastic Axial (1)(3)(9) 9 VS-90SQ045x-M3 I DO-204AR 30-35-40-45 0.42 9 150 10 VS-10WQ045FNxPBF I Power Plastic SMD(1)(3)(9) TO-252AA (DPAK) 45 0.53 10 175 10 VS-10WQ045FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 45 0.53 10 175 10 VS-10CTQ150SxPBF I Power Plastic SMD (2)(3)(6) TO-263AB (D PAK) 150 0.86 5 175 10 VS-10TQ045SxPBF I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 35-40-45 0.49 10 175 10 VS-MBRB1045xPBF I Power Plastic SMD TO-263AB (D PAK) 35-40-45 0.57 10 150 10 VS-10CTQ150-1PBF I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 150 0.86 5 175 Power Plastic Through Hole TO-220AB 150 0.86 5 175 TO-220AB 150 0.86 5 175 TO-220AC 35-40-45 0.49 10 175 TO-220AC 35-40-45 0.49 10 175 TO-220AB 35-40-45 0.57 10 150 TO-220AB 35-40-45 0.57 10 150 10 VS-10CTQ150PBF I 10 VS-10CTQ150-N3 I 10 VS-10TQ045PBF I 10 VS-10TQ045-N3 I (1)(3)(6) (1)(3)(6) 2 (1)(3)(6) 2 (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (1)(8) Power Plastic Through Hole(1)(7) 10 VS-MBR1045PBF I 10 VS-MBR1045-N3 I Power Plastic Through Hole 12 VS-12CWQ03FNxPBF I Power Plastic SMD 12 VS-12CWQ03FNx-M3 I Power Plastic SMD(2)(3)(6) 12 VS-12CWQ04FNxPBF I Power Plastic SMD(2)(3)(9) TO-252AA (DPAK) 40 0.64 6 150 12 VS-12CWQ04FNx-M3 I Power Plastic SMD(2)(3)(6) TO-252AA (DPAK) 40 0.64 6 150 12 VS-12CWQ06FNxPBF I Power Plastic SMD(2)(3)(9) TO-252AA (DPAK) 60 0.72 6 150 12 VS-12CWQ06FNx-M3 I Power Plastic SMD(2)(3)(6) TO-252AA (DPAK) 60 0.72 6 150 Power Plastic Through Hole(2)(7) Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (2)(8) (2)(3)(9) TO-252AA (DPAK) 30 0.49 6 150 TO-252AA (DPAK) 30 0.49 6 150 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 24/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HPS GEN 2.x (Planar Technology), continued IF(AV) (A) Device(5) Source(4) 12 VS-12CWQ10FNxPBF I Package Type V(BR) Range (V) (V) (A) Tj Max (C) Power Plastic SMD(2)(3)(9) TO-252AA (DPAK) 100 0.78 6 150 Family (3) Max VF at IF 12 VS-12CWQ10FNx-M3 I Power Plastic SMD TO-252AA (DPAK) 100 0.78 6 150 12 VS-12CTQ045SxPBF I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 35-40-45 0.64 6 175 12 VS-12TQ045SxPBF I Power Plastic SMD 12 VS-12CTQ045PBF I 12 VS-12CTQ045-N3 12 (2)(3)(6) 2 TO-263AB (D PAK) 35-40-45 0.50 15 150 Power Plastic Through Hole(2)(8) TO-220AB 35-40-45 0.64 6 175 I Power Plastic Through Hole(2)(7) TO-220AB 35-40-45 0.64 6 175 VS-12TQ045PBF I Power Plastic Through Hole(1)(8) TO-220AC 35-40-45 0.50 12 150 12 VS-12TQ045-N3 I Power Plastic Through Hole(1)(7) TO-220AC 35-40-45 0.50 12 150 15 VS-150SQ045x I Plastic Axial(1)(3)(9) DO-204AR 30-35-40-45 0.64 15 150 15 VS-150SQ045x-M3 I Plastic Axial(1)(3)(6) DO-204AR 30-35-40-45 0.64 15 150 15 VS-15TQ060SxPBF I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 60 0.56 15 150 15 VS-15CTQ045SxPBF I Power Plastic SMD (2)(3)(6) TO-263AB (D PAK) 35-40-45 0.65 7.5 150 15 VS-MBRB1545CTxPBF I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 35-40-45 0.72 7.5 150 15 VS-15CTQ045-1PBF I Power Plastic Through Hole (2)(6) TO-262 (I PAK) 35-40-45 0.65 7.5 150 15 VS-MBR1545CT-1PBF I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 35-40-45 0.72 7.5 150 Power Plastic Through Hole (1)(3)(6) 2 15 VS-15TQ060PBF I 15 VS-15TQ060-N3 I 15 VS-15CTQ045PBF I Power Plastic Through Hole 15 VS-15CTQ045-N3 I Power Plastic Through Hole 15 VS-MBR1545CTPBF I Power Plastic Through Hole(2)(8) 15 VS-MBR1545CT-N3 I 16 VS-MBRB1645xPBF 16 16 16 16 2 TO-220AC 60 0.56 15 150 TO-220AC 60 0.56 15 150 TO-220AB 35-40-45 0.65 7.5 150 TO-220AB 35-40-45 0.65 7.5 150 TO-220AB 35-40-45 0.72 7.5 150 Power Plastic Through Hole(2)(7) TO-220AB 35-40-45 0.72 7.5 150 I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 35-40-45 0.57 16 150 VS-16CTQ100SxPBF I Power Plastic SMD TO-263AB (D PAK) 80-100 0.69 8 175 VS-MBRB1645-1PBF I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 35-40-45 0.57 16 150 VS-16CTQ100-1PBF I Power Plastic Through Hole TO-262 (I PAK) 80-100 0.69 8 175 VS-MBR1645PBF I Power Plastic Through Hole(1)(8) TO-220AC 35-40-45 0.57 16 150 16 VS-MBR1645-N3 I Power Plastic Through Hole(1)(7) TO-220AC 35-40-45 0.57 16 150 18 VS-18TQ045PBF I Power Plastic Through Hole(1)(8) TO-220AC 35-40-45-50 0.53 18 175 18 VS-18TQ045-N3 I Power Plastic Through Hole(1)(7) TO-220AC 35-40-45-50 0.53 18 175 16 VS-16CTQ100PBF I Power Plastic Through Hole(2)(8) TO-220AB 60-80-100 0.69 8 175 16 VS-16CTQ100-N3 I Power Plastic Through Hole(2)(7) TO-220AB 60-80-100 0.69 8 175 18 VS-18TQ045SxPBF I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 35-40-45 0.53 18 175 19 VS-19TQ015SxPBF I Power Plastic SMD 19 VS-19TQ015PBF I (1)(8) Power Plastic Through Hole(1)(7) (2)(7) (2)(3)(6) 2 (2)(6) (1)(3)(6) 2 2 TO-263AB (D PAK) 15 0.32 19 125 TO-220AC 15 0.32 19 125 Power Plastic Through Hole(1)(8) Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (2)(8) 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 25/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HPS GEN 2.x (Planar Technology), continued IF(AV) (A) Device(5) Source(4) 19 VS-19TQ015-N3 I Package Family Type (3) Power Plastic Through Hole(1)(7) TO-220AC V(BR) Range (V) Max VF at IF (V) (A) Tj Max (C) 15 0.32 19 125 20 VS-20L15TSxPBF I Power Plastic SMD TO-263AB (D PAK) 15 0.33 20 125 20 VS-20CTQ150SxPBF I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 150 0.77 10 175 20 VS-20CTQ045SxPBF I Power Plastic SMD (2)(3)(6) TO-263AB (D PAK) 35-40-45 0.68 10 175 20 VS-20TQ045SxPBF I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 35-40-45 0.51 10 150 20 VS-MBRB2045CTxPBF I Power Plastic SMD TO-263AB (D PAK) 35-40-45 0.72 10 150 20 VS-MBRB20100CTxPBF I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 80-90-100 0.85 10 150 20 VS-20CTQ045-1PBF 20 VS-20CTQ150-1PBF 20 20 (1)(3)(6) 2 2 (2)(3)(6) 2 I Power Plastic Through Hole (2)(6) TO-262 (I PAK) 45 0.68 10 175 I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 150 0.77 10 175 VS-MBR2045CT-1PBF I (2)(6) Power Plastic Through Hole TO-262 (I PAK) 35-40-45 0.72 10 150 VS-MBR20100CT-1PBF I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 80-90-100 0.85 10 150 Power Plastic Through Hole 20 VS-20L15TPBF I 20 VS-20L15T-N3 I 20 VS-20CTQ150PBF I 20 VS-20CTQ150-N3 I 2 2 (1)(8) Power Plastic Through Hole(1)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) 20 VS-20CTQ045PBF I 20 VS-20CTQ045-N3 I 20 VS-20TQ045PBF I Power Plastic Through Hole 20 VS-20TQ045-N3 I Power Plastic Through Hole 20 VS-MBR2045CTPBF I Power Plastic Through Hole(2)(8) 20 VS-MBR2045CT-N3 I Power Plastic Through Hole(2)(7) 20 VS-MBR20100CTK-N3 I Power Plastic Through Hole(2)(7) 25 VS-25CTQ045SxPBF 25 VS-MBRB2545CTxPBF 25 25 15 0.33 20 125 15 0.33 20 125 TO-220AB 150 0.77 10 175 TO-220AB 150 0.77 10 175 TO-220AB 35-40-45 0.68 10 175 TO-220AB 35-40-45 0.68 10 175 TO-220AC 35-40-45 0.51 10 150 TO-220AC 35-40-45 0.51 10 150 TO-220AB 35-40-45 0.72 10 150 TO-220AB 35-40-45 0.72 10 150 TO-220AB 60-80-100 0.65 10 175 I Power Plastic SMD (2)(3)(6) TO-263AB (D PAK) 35-40-45 0.64 12.5 150 I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 45 0.73 12.5 150 VS-MBR2545CT-1PBF I (2)(6) Power Plastic Through Hole TO-262 (I PAK) 35-40-45 0.73 12.5 150 VS-25CTQ045-1PBF I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 35-40-45 0.64 12.5 150 Power Plastic Through Hole 25 VS-25CTQ045PBF I 25 VS-25CTQ045-N3 I 25 VS-MBR2545CTPBF I 25 VS-MBR2545CT-N3 I 30 VS-32CTQ030SxPBF 30 VS-MBRB3030CTLxPBF 30 30 Power Plastic Through Hole TO-220AC TO-220AC (2)(8) Power Plastic Through Hole(2)(7) (1)(8) (1)(7) 2 2 (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole TO-220AB 35-40-45 0.64 12.5 150 TO-220AB 35-40-45 0.64 12.5 150 TO-220AB 45 0.73 12.5 150 TO-220AB 45 0.73 12.5 150 I Power Plastic SMD (2)(3)(6) TO-263AB (D PAK) 30 0.53 15 150 I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 30 0.51 15 150 VS-30CTQ045SxPBF I Power Plastic SMD (2)(3)(6) TO-263AB (D PAK) 45 0.70 15 175 VS-MBRB3045CTxPBF I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 45 0.72 15 150 Power Plastic Through Hole(2)(7) Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (2)(8) 2 2 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 26/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . I INNOVAT AND TEC O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HPS GEN 2.x (Planar Technology), continued Package V(BR) Range (V) (V) (A) Tj Max (C) TO-263AB (D2PAK) 60 0.71 15 150 TO-263AB (D PAK) 80-100 0.82 15 175 TO-262 (I2PAK) 30 0.50 15 150 I Power Plastic Through Hole (2)(6) TO-262 (I PAK) 30 0.53 15 150 I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 45 0.70 15 175 VS-MBR3045CT-1PBF I (2)(6) Power Plastic Through Hole TO-262 (I PAK) 45 0.72 15 150 VS-30CTQ060-1PBF I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 60 0.71 15 150 30 VS-30CTQ100-1PBF I Power Plastic Through Hole TO-262 (I PAK) 80-100 0.82 15 175 30 VS-30L30CTPBF I Power Plastic Through Hole(2)(8) TO-220AB 30 0.50 15 150 30 VS-30L30CT-N3 I Power Plastic Through Hole(2)(7) TO-220AB 30 0.50 15 150 30 VS-MBR3045CTPBF I Power Plastic Through Hole(2)(8) TO-220AB 45 0.72 15 150 30 VS-MBR3045CT-N3 I Power Plastic Through Hole TO-220AB 45 0.72 15 150 Power Plastic Through Hole IF(AV) (A) Device(5) Source(4) 30 VS-30CTQ060SxPBF I Power Plastic SMD(2)(3)(6) 30 VS-30CTQ100SxPBF I Power Plastic SMD 30 VS-30L30CT-1PBF I Power Plastic Through Hole(2)(6) 30 VS-32CTQ030-1PBF 30 VS-30CTQ045-1PBF 30 30 30 VS-32CTQ030PBF I 30 VS-32CTQ030-N3 I Family Type (3) (2)(3)(6) 2 (2)(6) (2)(7) 25-30 0.53 15 150 25-30 0.53 15 150 (2)(8) TO-220AB 35-40-45 0.70 15 175 TO-220AB 35-40-45 0.70 15 175 TO-220AB 50-60 0.71 15 150 TO-220AB 50-60 0.71 15 150 VS-30CTQ045PBF I Power Plastic Through Hole VS-30CTQ045-N3 I Power Plastic Through Hole(2)(7) 30 VS-30CTQ060PBF I Power Plastic Through Hole 30 VS-30CTQ060-N3 I VS-30CTQ100PBF I VS-30CTQ100-N3 I 30 VS-30CPQ150PBF I 30 VS-30CPQ150-N3 I 30 VS-30CPQ045PBF I 30 VS-30CPQ045-N3 I 30 VS-MBR3045WTPBF I 30 VS-MBR3045WT-N3 I 30 VS-30CPQ060PBF I 30 VS-30CPQ060-N3 I 30 VS-30CPQ100PBF I 30 VS-30CPQ100-N3 I (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole 2 TO-220AB Power Plastic Through Hole(2)(7) 30 30 2 TO-220AB (2)(8) 30 30 2 Max VF at IF TO-220AB 80-100 0.65 15 175 TO-220AB 80-100 0.65 15 175 TO-247AC 150 0.93 15 175 TO-247AC 150 0.93 15 175 TO-247AC 35-40-45 0.64 15 150 TO-247AC 35-40-45 0.64 15 150 TO-247AC 35-40-45 0.72 30 150 TO-247AC 35-40-45 0.72 30 150 TO-247AC 50-60 0.70 15 150 TO-247AC 50-60 0.70 15 150 TO-247AC 80-90-100 0.81 15 175 TO-247AC 80-90-100 0.81 15 175 (2)(3)(6) (2)(8) Power Plastic Through Hole(2)(7) 40 VS-40L15CTSxPBF I Power Plastic SMD TO-263AB (D PAK) 15 0.50 20 125 40 VS-47CTQ020SxPBF I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 20 0.42 20 150 40 VS-42CTQ030SxPBF I Power Plastic SMD (2)(3)(6) TO-263AB (D PAK) 30 0.51 20 150 40 VS-40CTQ045SxPBF I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 45 0.67 20 150 Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 2 2 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 27/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HPS GEN 2.x (Planar Technology), continued Package V(BR) Range (V) (V) (A) Tj Max (C) 45 0.75 20 150 TO-263AB (D PAK) 60 0.75 20 150 TO-263AB (D2PAK) 150 0.85 20 175 TO-263AB (D PAK) 80-100 0.81 20 175 TO-262 (I2PAK) 15 0.50 20 125 I Power Plastic Through Hole (2)(6) TO-262 (I PAK) 20 0.42 20 150 I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 30 0.51 20 150 VS-40CTQ045-1PBF I Power Plastic Through Hole (2)(6) TO-262 (I PAK) 45 0.67 20 150 VS-MBR4045CT-1PBF I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 45 0.75 20 150 VS-48CTQ060-1PBF I Power Plastic Through Hole (2)(6) TO-262 (I PAK) 60 0.75 20 150 VS-40CTQ150-1PBF I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 150 0.85 20 175 40 VS-43CTQ100-1PBF I Power Plastic Through Hole TO-262 (I PAK) 80-100 0.81 20 175 40 VS-40L15CTPBF I Power Plastic Through Hole(2)(8) TO-220AB 15 0.50 20 125 40 VS-40L15CT-N3 I Power Plastic Through Hole(2)(7) TO-220AB 15 0.5 20 125 40 VS-47CTQ020PBF I Power Plastic Through Hole(2)(8) TO-220AB 20 0.42 20 150 40 VS-47CTQ020-N3 I Power Plastic Through Hole(2)(7) TO-220AB 20 0.42 20 150 40 VS-42CTQ030PBF I Power Plastic Through Hole(2)(8) TO-220AB 30 0.51 20 150 40 VS-42CTQ030-N3 I Power Plastic Through Hole(2)(7) TO-220AB 30 0.51 20 150 IF(AV) (A) Device(5) Source(4) 40 VS-MBRB4045CTxPBF I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 40 VS-48CTQ060SxPBF I Power Plastic SMD (2)(3)(6) 40 VS-40CTQ150SxPBF I Power Plastic SMD(2)(3)(6) 40 VS-43CTQ100SxPBF I Power Plastic SMD 40 VS-40L15CT-1PBF I Power Plastic Through Hole(2)(6) 40 VS-47CTQ020-1PBF 40 VS-42CTQ030-1PBF 40 40 40 40 40 VS-40CTQ045PBF I 40 VS-40CTQ045-N3 I 40 VS-MBR4045CTPBF I 40 VS-MBR4045CT-N3 I 40 VS-48CTQ060PBF I 40 VS-48CTQ060-N3 I 40 VS-43CTQ100PBF I 40 VS-43CTQ100-N3 I 40 VS-40CTQ150PBF I 40 VS-40CTQ150-N3 I 40 VS-40L15CWPBF I 40 VS-40L15CW-N3 I 40 VS-MBR40L15CWPBF I 40 VS-MBR40L15CW-N3 I 40 VS-40L40CWPBF I 40 VS-40L40CW-N3 I Family 2 (2)(3)(6) Power Plastic Through Hole 2 2 2 2 (2)(6) 2 (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide Type (3) Max VF at IF TO-220AB 45 0.67 20 150 TO-220AB 45 0.67 20 150 TO-220AC 45 0.75 20 150 TO-220AC 45 0.75 20 150 TO-220AB 60 0.75 20 150 TO-220AB 60 0.75 20 150 TO-220AB 100 0.81 20 175 TO-220AB 100 0.81 20 175 TO-220AB 150 0.85 20 175 TO-220AB 150 0.85 20 175 TO-247AC 15 0.50 40 125 TO-247AC 15 0.50 40 125 TO-247AC 15 0.50 20 125 TO-247AC 15 0.50 20 125 TO-247AC 40 0.70 20 150 TO-247AC 40 0.70 20 150 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 28/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HPS GEN 2.x (Planar Technology), continued Package Type V(BR) Range (V) Max VF at IF (V) (A) Tj Max (C) TO-247AC 45 0.70 20 150 IF(AV) (A) Device(5) Source(4) 40 VS-40L45CWPBF I 40 VS-40L45CW-N3 I TO-247AC 45 0.70 20 150 40 VS-MBR4045WTPBF I Power Plastic Through Hole(2)(8) TO-247AC 45 0.72 40 150 40 VS-MBR4045WT-N3 I Power Plastic Through Hole(2)(7) TO-247AC 45 0.72 40 150 40 VS-MBR4060WTPBF I Power Plastic Through Hole(2)(8) TO-247AC 60 0.62 40 150 40 VS-MBR4060WT-N3 I Power Plastic Through Hole(2)(7) TO-247AC 60 0.62 40 150 40 VS-40CPQ045PBF I Power Plastic Through Hole(2)(8) TO-247AC 35-40-45 0.56 20 150 40 VS-40CPQ045-N3 I Power Plastic Through Hole(2)(7) TO-247AC 35-40-45 0.56 20 150 40 VS-40CPQ060PBF I Power Plastic Through Hole(2)(8) TO-247AC 50-60 0.64 20 150 40 VS-40CPQ060-N3 I Power Plastic Through Hole(2)(7) TO-247AC 50-60 0.64 20 150 40 VS-40CPQ100PBF I Power Plastic Through Hole(2)(8) TO-247AC 80-100 0.75 20 175 40 VS-40CPQ100-N3 I Power Plastic Through Hole(2)(7) TO-247AC 80-100 0.75 20 175 50 VS-52CPQ030PBF I Power Plastic Through Hole(2)(8) TO-247AC 30 0.49 25 150 50 VS-52CPQ030-N3 I Power Plastic Through Hole(2)(7) TO-247AC 30 0.49 25 150 60 VS-62CTQ030PBF I Power Plastic Through Hole(2)(8) TO-220AC 30 0.59 30 150 60 VS-62CTQ030-N3 I Power Plastic Through Hole(2)(7) TO-220AC 30 0.59 30 150 60 VS-63CTQ100PBF I Power Plastic Through Hole(2)(8) TO-220AB 100 0.83 30 175 60 VS-63CTQ100-N3 I Power Plastic Through Hole(2)(7) TO-220AB 100 0.83 30 175 TO-220AB 150 0.87 30 175 TO-220AB 150 0.87 30 175 TO-220AC 35-40-45 0.75 30 150 TO-220AC 35-40-45 0.75 30 150 60 VS-60CTQ150PBF I 60 VS-60CTQ150-N3 I 60 VS-60CTQ045PBF I 60 VS-60CTQ045-N3 I 60 VS-61CTQ045PBF I 60 VS-61CTQ045-N3 I 60 VS-MBR6045WTPBF I 60 VS-MBR6045WT-N3 I 60 VS-63CPQ100PBF I 60 VS-63CPQ100-N3 I 60 VS-60CPQ150PBF I 60 VS-60CPQ150-N3 I 65 VS-65PQ015PBF I 65 VS-65PQ015-N3 I 70 VS.72CPQ030PBF I 70 VS.72CPQ030-N3 I Family Power Plastic Through Hole(2)(8) Power Plastic Through Hole Power Plastic Through Hole (2)(7) (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole TO-220AC 35-40-45 0.74 30 175 TO-220AC 35-40-45 0.74 30 175 TO-247AC 45 0.55 30 150 TO-247AC 45 0.55 30 150 TO-247AC 100 0.76 30 175 TO-247AC 100 0.76 30 175 TO-247AC 150 0.77 30 175 TO-247AC 150 0.77 30 175 TO-247AC (mod) 15 0.46 65 125 Power Plastic Through Hole(1)(7) TO-247AC (mod) 15 0.46 65 125 TO-247AC 30 0.58 35 150 TO-247AC 30 0.58 35 150 (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (1)(8) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (3) 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 29/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HPS GEN 2.x (Planar Technology), continued Package Type V(BR) Range (V) Max VF at IF (V) (A) Tj Max (C) TO-247AC 20 0.46 40 150 IF(AV) (A) Device(5) Source(4) 80 VS-80CPQ020PBF I 80 VS-80CPQ020-N3 I TO-247AC 20 0.46 40 150 80 VS-80CPQ150PBF I Power Plastic Through Hole(2)(8) TO-247AC 150 0.85 40 175 80 VS-80CPQ150-N3 I Power Plastic Through Hole(2)(7) TO-247AC 150 0.85 40 175 80 VS-85CNQ015APBF I Power Plastic Through Hole(2)(9) D61-8 15 0.42 40 125 80 VS-87CNQ020APBF I Power Plastic Through Hole(2)(9) D61-8 20 0.39 40 150 80 VS-82CNQ030APBF I Power Plastic Through Hole(2)(9) D61-8 30 0.47 40 150 80 VS-88CNQ060APBF I (2)(9) Power Plastic Through Hole D61-8 60 0.67 40 150 80 VS-80CNQ045APBF I Power Plastic Through Hole(2)(9) D61-8 40-45 0.61 40 150 80 VS-81CNQ045APBF I (2)(9) Power Plastic Through Hole D61-8 40-45 0.66 40 175 80 VS-83CNQ100APBF I Power Plastic Through Hole(2)(9) D61-8 80-100 0.82 40 175 80 VS-85CNQ015ASLPBF I (2)(9) Power Plastic Through Hole D61-8-SL 15 0.42 40 125 80 VS-87CNQ020ASLPBF I Power Plastic Through Hole(2)(9) D61-8-SL 20 0.39 40 150 80 VS-82CNQ030ASLPBF I (2)(9) Power Plastic Through Hole D61-8-SL 30 0.47 40 150 80 VS-88CNQ060ASLPBF I Power Plastic Through Hole(2)(9) D61-8-SL 60 0.67 40 150 80 VS-80CNQ045ASLPBF I (2)(9) Power Plastic Through Hole D61-8-SL 35-40-45 0.61 40 150 80 VS-81CNQ045ASLPBF I Power Plastic Through Hole(2)(9) D61-8-SL 35-40-45 0.66 40 175 80 VS-83CNQ100ASLPBF I Power Plastic Through Hole D61-8-SL 80-100 0.82 40 175 (2)(9) Family (3) Power Plastic Through Hole(2)(8) Power Plastic Through Hole (2)(7) (2)(9) 80 VS-85CNQ015ASMPBF I Power Plastic SMD D61-8-SM 15 0.42 40 125 80 VS-87CNQ020ASMPBF I Power Plastic SMD(2)(9) D61-8-SM 20 0.39 40 150 80 VS-82CNQ030ASMPBF I (2)(9) Power Plastic SMD D61-8-SM 30 0.47 40 150 80 VS-88CNQ060ASMPBF I Power Plastic SMD(2)(9) D61-8-SM 60 0.67 40 150 80 VS-80CNQ045ASMPBF I (2)(9) Power Plastic SMD D61-8-SM 35-40-45 0.61 40 150 80 VS-81CNQ045ASMPBF I Power Plastic SMD(2)(9) D61-8-SM 35-40-45 0.66 40 175 Power Plastic SMD 80 VS-83CNQ100ASMPBF I D61-8-SM 80-100 0.82 40 175 100 VS-100BGQ015 I Power Plastic Through Hole(1)(8) PowerTabTM 15 0.42 100 125 100 VS-100BGQ030 I Power Plastic Through Hole (1)(8) PowerTabTM 30 0.51 100 150 100 VS-100BGQ045 I Power Plastic Through Hole(1)(8) PowerTabTM 45 0.68 100 150 100 VS-100BGQ100 I Power Plastic Through Hole PowerTabTM 100 0.77 100 175 110 VS-115CNQ015APBF I Power Plastic Through Hole(2)(9) D61-8 15 0.43 55 125 110 VS-112CNQ030APBF I Power Plastic Through Hole(2)(9) D61-8 30 0.51 55 150 110 VS-110CNQ045APBF I Power Plastic Through Hole(2)(9) D61-8 45 0.69 55 150 110 VS-111CNQ045APBF I (2)(9) Power Plastic Through Hole D61-8 45 0.69 55 175 110 VS-113CNQ100APBF I Power Plastic Through Hole(2)(9) D61-8 100 0.79 33 175 (2)(9) Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (1)(8) 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 30/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Schottky Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HPS GEN 2.x (Planar Technology), continued Type V(BR) Range (V) (V) (A) Tj Max (C) Power Plastic Through Hole(2)(9) D61-8-SL 15 0.43 55 125 I (2)(9) Power Plastic Through Hole D61-8-SL 30 0.51 55 150 I Power Plastic Through Hole(2)(9) D61-8-SL 45 0.69 55 175 VS-113CNQ100ASLPBF I (2)(9) Power Plastic Through Hole D61-8-SL 100 0.79 55 175 VS-110CNQ045ASLPBF I Power Plastic Through Hole(2)(9) D61-8-SL 40-45 0.69 55 150 (2)(9) IF(AV) (A) Device(5) Source(4) 110 VS-115CNQ015ASLPBF I 110 VS-112CNQ030ASLPBF 110 VS-111CNQ045ASLPBF 110 110 Package Family (3) Max VF at IF 110 VS-115CNQ015ASMPBF I Power Plastic SMD D61-8-SM 15 0.43 55 125 110 VS-112CNQ030ASMPBF I Power Plastic SMD(2)(9) D61-8-SM 30 0.51 55 150 110 VS-110CNQ045ASMPBF I (2)(9) Power Plastic SMD D61-8-SM 45 0.69 55 150 110 VS-111CNQ045ASMPBF I Power Plastic SMD(2)(9) D61-8-SM 45 0.69 55 175 110 VS-113CNQ100ASMPBF I Power Plastic SMD D61-8-SM 100 0.79 55 175 175 VS-175BGQ030 I Power Plastic Through Hole(1)(8) PowerTabTM 30 0.49 175 150 175 VS-175BGQ045 I Power Plastic Through Hole PowerTabTM 45 0.64 175 150 (2)(9) Note: 1. Singled die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (1)(8) 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs Compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free 9. RoHs compliant 31/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Ultrafast Recovery Rectifiers have very fast reverse recovery times (as low as 15 ns) and voltage levels as high as 1500 V. They are ideally suited for very high frequency switching power supplies, inverters, and freewheeling diodes. Both platinum-doped types with excellent high-temperature leakage current and gold-doped types for soft reverse recovery with excellent recovery temperature stability are offered. Package Device(1) 0.6 UG06A to UG06D Plastic Axial(2) MPG06 50 - 200 0.95 0.6 15 1.0 ES1A to ES1D Plastic SMD(2) DO-214AC (SMA) 50 - 200 0.92 1.0 15 1.0 ES1PB, ES1PC and ES1PD Plastic SMD(2) DO-220AA (SMP) 100 - 200 0.865 / 0.92 0.6 / 1.0 15 1.0 ESH1B, ESH1C and ESH1D Plastic SMD(2) DO-214AC (SMA) 100 - 200 0.87 / 0.90 0.7 / 1.0 25 1.0 ESH1PB, ESH1PC and ESH1PD Plastic SMD(2) DO-220AA (SMP) 100 - 200 0.86 / 0.90 0.7 / 1.0 25 1.0 MUH1PB, MUH1PC and MUH1PD Plastic SMD(4) Micro SMP 100 - 200 1.05 1.0 25 1.0 MUR120 Plastic Axial(2) DO-204AC (DO-15) 200 0.88 1.0 25 1.0 MUR140 and MUR160 Plastic Axial(2) DO-204AC (DO-15) 400 - 600 1.25 1.0 50 1.0 MURS120 (2) Plastic SMD DO-214AA (SMB) 200 0.88 1.0 25 1.0 MURS140 and MURS160 Plastic SMD(2) DO-214AA (SMB) 400 - 600 1.25 1.0 50 1.0 U1B, U1C and U1D Plastic SMD DO-214AC (SMA) 100 - 200 0.92 1.0 15 1.0 UF4001 to UF4007 Plastic Axial(2) DO-204AL (DO-41) 50 - 1000 1.0 / 1.7 1.0 50 / 75 1.0 UG1A to UG1D Plastic Axial(2) DO-204AL (DO-41) 50 - 200 0.95 1.0 15 1.0 UH1B, UH1C and UH1D Plastic SMD(4) DO-214AC (SMA) 100 - 200 1.05 1.0 25 1.0 UH1PB, UH1PC and UH1PD Plastic SMD (4) DO-220AA (SMP) 100 - 200 1.05 1.0 25 1.0 US1A to US1M Plastic SMD(2) DO-214AC (SMA) 50 - 1000 1.0 / 1.7 1.0 50 / 75 1.2 ES07B Plastic SMD(2) DO-219AB (SMF) 100 0.98 1.0 25 1.2 ES07D Plastic SMD(2) DO-219AB (SMF) 200 0.98 1.0 25 1.5 BYG20D to BYG20J Plastic SMD (2) DO-214AC (SMA) 200 - 600 1.30 1.0 75 1.5 BYG23M Plastic SMD(2) DO-214AC (SMA) 1000 1.70 1.0 75 2.0 BYG22A to BYG22D Plastic SMD (2) DO-214AC (SMA) 50 - 200 1.10 2.0 25 2.0 ES2A to ES2D Plastic SMD(2) DO-214AA (SMB) 50 - 200 0.90 2.0 20 2.0 ES2F and ES2G Plastic SMD (2) DO-214AA (SMB) 300 - 400 1.10 2.0 35 2.0 ESH2B, ESH2C and ESH2D Plastic SMD(2) DO-214AA (SMB) 100 - 200 0.93 2.0 25 2.0 2.0 Type Family(3) (4) V(BR) Range (V) Max VF at IF IF(AV) (A) (V) (A) Trr (ns) ESH2PB, ESH2PC and ESH2PD Plastic SMD (2) DO-220AA (SMP) 100 - 200 0.98 2.0 25 MURS240 and MURS260 Plastic SMD(2) DO-214AA (SMB) 400 - 600 1.45 2.0 50 2.0 SBYV27-50 to SBYV27-200 Plastic Axial(2) DO-204AC (DO-15) 50 - 200 1.07 3.0 15 2.0 U2B, U2C and U2D Plastic Axial(4) DO-214AA (SMB) 100 - 200 0.90 2.0 20 (2) 2.0 UG2A to UG2D Plastic Axial DO-204AC (DO-15) 50 - 200 0.95 2.0 15 2.0 UG2F and UG2G Plastic Axial(2) DO-204AC (DO-15) 300 - 400 1.10 2.0 35 2.0 UH2B, UH2Cand UH2D (4) Plastic Axial DO-214AA (SMB) 100 - 200 1.05 2.0 25 2.0 USB260 Plastic SMD(2) DO-214AA (SMB) 600 1.60 2.0 30 3.0 31GF4 Plastic Axial DO-201AD 400 1.25 3.0 30 3.0 31GF6 Plastic Axial DO-201AD 600 1.60 3.0 30 Note: 1. Bold text indicates new product 2. Glass passivated die selector guide (2) (2) 3. Dual center-tapped device (VF limit at IF is per diode) 4. Oxide planar die 32/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Ultrafast Recovery Rectifiers, continued IF(AV) (A) Device(1) 3.0 Package Max VF at IF V(BR) Range (V) (V) (A) Trr (ns) DO-214AB (SMC) 50 - 200 0.90 3.0 20 DO-214AB (SMC) 300 - 400 1.10 3.0 35 ESH3B, ESH3C and ESH3D Plastic SMD (2) DO-214AB (SMC) 100 - 200 0.90 3.0 25 MURS320 Plastic SMD(2) DO-214AB (SMC) 200 0.88 3.0 25 3.0 MURS340 and MURS360 Plastic SMD DO-214AB (SMC) 400 & 600 1.25 / 1.28 3.0 / 4.0 50 3.0 MURS340S and MURS360S Plastic Axial(2) DO-214AA (SMB) 400 & 600 1.45 3.0 50 Family(3) Type ES3A to ES3D Plastic SMD(2) 3.0 ES3F and ES3G Plastic SMD(2) 3.0 3.0 (2) 3.0 U3B, U3C and U3D Plastic SMD DO-214AB (SMC) 100 - 200 0.90 3.0 20 3.0 UF5400 to UF5408 Plastic Axial(2) DO-201AD 50 - 1000 1.0 / 1.7 3.0 50 / 75 3.0 UH3B, UH3C and UH3D Plastic SMD(4) DO-214AB (SMC) 100 - 200 1.05 3.0 25 3.5 SBYV28-50 to SBYV28-200 Plastic Axial(2) DO-201AD 50 - 200 1.10 3.5 20 4.0 MUR420 Plastic Axial(2) DO-201AD 200 0.89 4.0 25 4.0 MUR440 and MUR460 Plastic Axia DO-201AD 400 - 600 1.28 4.0 50 4.0 UH4PBC, UH4PCC and UH4PDC Plastic SMD(4) TO-277A (SMPC) 100 - 200 1.05 2.0 25 4.0 UG4A to UG4D Plastic Axial(2) DO-201AD 50 - 200 0.95 4.0 20 5.0 GUR5H60 Plastic Power Pack TO-220AC 600 1.80 5.0 30 5.0 GURB5H60 Power Pack SMD(2) TO-263AB (D2PAK) 600 1.80 5.0 30 (4) l(2) (2) 5.0 GURF5H60 Isolated Power Pack ITO-220AC 600 1.80 5.0 30 5.0 UG5HT and UG5JT Plastic Power Pack(2) TO-220AC 500 - 600 1.75 5.0 25 5.0 UGB5HT and UGB5JT Power Pack SMD(2) TO-263AB (D2PAK) 500 - 600 1.75 5.0 25 5.0 UGF5HT and UGF5JT Isolated Power Pack(2) ITO-220AC 500 - 600 1.75 5.0 25 6.0 FEP6AT to FEP6DT Plastic Power Pack(2)(3) TO-220AB 50 - 200 0.98 3.0 35 6.0 FEPB6AT to FEPB6DT Power Pack SMD(2)(3) TO-263AB (D2PAK) 50 - 200 0.98 3.0 35 (2) 6.0 FEPF6AT to FEPF6DT 6.0 UH6PD Isolated Power Pack Plastic SMD(4) ITO-220AB 50 - 200 0.98 3.0 35 TO-277A (SMPC) 200 1.05 6.0 25 6.0 UH6PJ Plastic SMD(4) TO-277A (SMPC) 600 3.0 6.0 25 8.0 BYV29-300 and BYV29-400 8.0 BYV29B-300 and BYV29B-400 Plastic Power Pack TO-220AC 300 - 400 1.25 8.0 35 Power Pack SMD(2) TO-263AB (D2PAK) 300 - 400 1.25 8.0 35 (2)(3) (2) 8.0 BYV29F-300 and BYV29F-400 Isolated Power Pack ITO-220AC 300 - 400 1.25 8.0 35 8.0 BYW29-50 to BYW29-200 Plastic Power Pack(2) TO-220AC 50 - 200 1.30 20 25 8.0 BYWB29-50 to BYWB29-200 Power Pack SMD(2) TO-263AB (D2PAK) 50 - 200 1.30 20 25 8.0 BYWF29-50 to BYWF29-200 Isolated Power Pack ITO-220AC 50 - 200 1.30 20 25 8.0 FES8AT to FES8JT Plastic Power Pack(2) TO-220AC 50 - 600 0.95 / 1.3 / 1.5 8.0 35 / 50 8.0 FESB8AT to FESB8JT Power Pack SMD(2) TO-263AB (D2PAK) 50 - 600 0.95 / 1.3 / 1.5 8.0 35 / 50 (2) (2) (2) 8.0 FESF8AT to FESF8JT Isolated Power Pack ITO-220AC 50 - 600 0.95 / 1.3 / 1.5 8.0 35 / 50 8.0 U8BT to U8DT Plastic Power Pack(4) TO-220AC 100 - 200 1.02 8.0 20 8.0 UF8BT to UF8DT Isolated Power Pack ITO-220AC 100 - 200 1.02 8.0 20 8.0 UB8BT to UB8DT Power Pack SMD(4) TO-263AB (D2PAK) 100 - 200 1.02 8.0 20 Note: 1. Bold text indicates new product 2. Glass passivated die selector guide (4) 3. Dual center-tapped device (VF limit at IF is per diode) 4. Oxide planar die 33/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Ultrafast Recovery Rectifiers, continued IF(AV) (A) Device(1) 8.0 GI1401 to GI1404 8.0 Package Max VF at IF Type V(BR) Range (V) (V) (A) Trr (ns) Plastic Power Pack(2) TO-220AC 50 - 200 0.98 8.0 35 GIB1401 to GIB1404 Power Pack SMD(2) TO-263AB (D2PAK) 50 - 200 0.98 8.0 35 Family(3) 8.0 UG8AT to UG8DT Plastic Power Pack TO-220AC 50 - 200 1.00 8.0 20 8.0 UGB8AT to UGB8DT Power Pack SMD(2) TO-263AB (D2PAK) 50 - 200 1.00 8.0 20 (2) 8.0 UGF8AT to UGF8DT Isolated Power Pack ITO-220AC 50 - 200 1.00 8.0 20 8.0 UG8FT and UG8GT Plastic Power Pack(2) TO-220AC 300 - 400 1.25 8.0 35 8.0 UGB8FT and UGB8GT Power Pack SMD(2) TO-263AB (D2PAK) 300 - 400 1.25 8.0 35 8.0 UGF8FT and UGF8GT Isolated Power Pack(2) ITO-220AC 300 - 400 1.25 8.0 35 8.0 UG8HT and UG8JT Plastic Power Pack(2) TO-220AC 500 - 600 1.75 8.0 25 8.0 UGB8HT and UGB8JT Power Pack SMD(2) TO-263AB (D2PAK) 500 - 600 1.75 8.0 25 8.0 UGF8HT and UGF8JT Isolated Power Pack ITO-220AC 500 - 600 1.75 8.0 25 Plastic Power Pack TO-220AB 500 - 600 1.75 4.0 25 TO-263AB (D2PAK) 500 - 600 1.75 4.0 25 (2) (2) 8.0 UG8HCT and UG8JCT 8.0 UGB8HCTand UGB8JCT 8.0 UGF8HCT and UGF8JCT ITO-220AB 500 - 600 1.75 4.0 25 10 BYQ28E-100 to BYQ28E-200 Power Pack SMD(2)(3) TO-220AB 100 - 200 1.10 5.0 20 10 BYQ28EB-100 to BYQ28EB-200 Power Pack SMD(2)(3) TO-263AB (D2PAK) 100 - 200 1.10 5.0 20 10 BYQ28EF-100 to BYQ28EF-200 ITO-220AB 100 - 200 1.10 5.0 20 10 BYT28-300 and BYT28-400 Plastic Power Pack(2)(3) TO-220AB 300 - 400 1.30 5.0 35 10 BYT28B-300 and BYT28B-400 Power Pack SMD(2)(3) TO-263AB (D2PAK) 300 - 400 1.30 5.0 35 (2)(3) Power Pack SMD(2)(3) Isolated Power Pack Isolated Power Pack (2)(3) (2)(3) 10 BYT28F-300 and BYT28F-400 Isolated Power Pack ITO-220AB 300 - 400 1.30 5.0 35 10 UG10BCT to UG10DCT Plastic Power Pack(2)(3) TO-220AB 100 - 200 1.10 5.0 20 10 UGB10BCT to UGB10DCT Power Pack SMD(2)(3) TO-263AB (D2PAK) 100 - 200 1.10 5.0 20 10 UGF10BCT to UGF10DCT Isolated Power Pack(2)(3) ITO-220AB 100 - 200 1.10 5.0 20 10 UG10FCT and UG10GCT Plastic Power Pack(2)(3) TO-220AB 300 - 400 1.30 5.0 35 10 UGB10FCT and UGB10GCT Power Pack SMD(2)(3) TO-263AB (D2PAK) 300 - 400 1.30 5.0 35 (2)(3) 10 UGF10FCT and UGF10GCT ITO-220AB 300 - 400 1.30 5.0 35 10 UH10FT Isolated Power Pack Plastic Power Pack(4) TO-220AC 300 1.2 10 25 10 UHB10FT Power Pack SMD(4) TO-263AB (D2PAK) 300 1.2 10 25 10 U10BCT to U10DCT Plastic Power Pack(3)(4) TO-220AB 100 - 200 1.10 5.0 20 TO-263AB (D PAK) 100 - 200 1.10 5.0 20 ITO-220AB 100 - 200 1.10 5.0 20 Power Pack SMD (2)(3) 10 UB10BCT to UB10DCT 10 UF10BCT to UF10DCT Isolated Power Pack(3)(4) 12 UG12HT and UG12JT Plastic Power Pack TO-220AC 500 - 600 1.75 12 30 12 UGB12HT and UGB12JT Power Pack SMD(2) TO-263AB (D2PAK) 500 - 600 1.75 12 30 (3)(4) (2) 2 12 UGF12HT and UGF12JT Isolated Power Pack ITO-220AC 500 - 600 1.75 12 30 15 UG15HT and UG15JT Plastic Power Pack(2) TO-220AC 500 - 600 1.75 15 35 15 UGB15HT and UGB15JT Power Pack SMD(2) TO-263AB (D2PAK) 500 - 600 1.75 15 35 15 UGF15HT and UGF15JT Isolated Power Pack(2) ITO-220AC 500 - 600 1.75 15 35 Note: 1. Bold text indicates new product 2. Glass passivated die selector guide (2) 3. Dual center-tapped device (VF limit at IF is per diode) 4. Oxide planar die 34/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Ultrafast Recovery Rectifiers, continued IF(AV) (A) Device(1) 16 Package Family(3) Type V(BR) Range (V) FEP16AT to FEP16JT Plastic Power Pack(2)(3) TO-220AB 16 FEPB16AT to FEPB16JT Power Pack SMD(2)(3) 16 FEPF16AT to FEPF16JT 16 Max VF at IF (V) (A) Trr (ns) 50 - 600 0.95 / 1.30 / 1.50 8 35 / 50 TO-263AB (D2PAK) 50 - 600 0.95 / 1.30 / 1.50 8 35 / 50 Isolated Power Pack(2)(3) ITO-220AB 50 - 600 0.95 / 1.30 / 1.50 8 35 / 50 FES16AT to FES16JT Plastic Power Pack(2) TO-220AC 50 - 600 0.975 / 1.30 / 1.50 16 35 / 50 16 FESB16AT to FESB16JT Power Pack SMD(2) TO-263AB (D2PAK) 50 - 600 0.975 / 1.30 / 1.50 16 35 / 50 16 FESF16AT to FESF16JT Isolated Power Pack(2) ITO-220AC 50 - 600 0.975 / 1.30 / 1.50 16 35 / 50 16 GI2401 to GI2404 Plastic Power Pack(2)(3) TO-220AB 50 - 200 0.98 8.0 35 16 GIB2401 to GIB2404 TO-263AB (D PAK) 50 - 200 0.98 8.0 35 16 U16BCT to U16DCT Plastic Power Pack(3)(4) TO-220AB 100 - 200 1.10 8.0 35 16 UB16BCT to UB16DCT Power Pack SMD(3)(4) TO-263AB (D2PAK) 100 - 200 1.10 8.0 35 18 BYV32-50 to BYV32-200 Plastic Power Pack(2)(3) TO-220AB 50 - 200 1.15 20 25 18 BYVB32-50 to BYVB32-200 Power Pack SMD TO-263AB (D PAK) 50 - 200 1.15 20 25 Isolated Power Pack ITO-220AB 50 - 200 1.15 20 25 TO-220AB 50 - 200 1.10 9.0 20 Power Pack SMD (2)(3) (2)(3) 2 2 18 BYVF32-50 to BYVF32-200 18 UG18ACT to UG18DCT 18 UGB18ACT to UGB18DCT 18 UGF18ACT to UGF18DCT Isolated Power Pack(2)(3) 20 U20BCT to U20DCT Plastic Power Pack(3)(4) TO-220AB 100 - 200 1.00 10 35 20 UB20BCT to UB20DCT Power Pack SMD(3)(4) TO-263AB (D2PAK) 100 - 200 1.00 10 35 20 UH20FCT Plastic Power Pack(3)(4) TO-220AB 300 1.2 10 25 20 UHB20FCT Power Pack SMD(3)(4) TO-263AB (D2PAK) 300 1.2 10 25 20 UHF20FCT Isolated Power Pack(3)(4) ITO-220AB 300 1.2 10 25 30 FEP30AP to FEP30JP Plastic Power Pack(2)(3) TO-247AD 50 - 600 0.95 / 1.3 / 1.5 15 35 / 50 30 U30BCT to U30DCT Plastic Power Pack(3)(4) TO-220AB 100 - 200 1.05 15 25 30 UB30BCT to UB30DCT Power Pack SMD(3)(4) TO-263AB (D2PAK) 100 - 200 1.05 15 25 30 UG30APT to UG30DPT Plastic Power Pack(2)(3) TO-247AD 50 - 200 1.00 15 25 Note: 1. Bold text indicates new product 2. Glass passivated die selector guide (2)(3) Plastic Power Pack(2)(3) Power Pack SMD (2)(3) TO-263AB (D PAK) 50 - 200 1.10 9.0 20 ITO-220AB 50 - 200 1.10 9.0 20 2 3. Dual center-tapped device (VF limit at IF is per diode) 4. Oxide planar die 35/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 FRED Pt(R) (Fast Recovery Epitaxial Diodes) Package IF(AV) (A) Device(5) 4 VS-4EWH02FNx-M3 5 Source(4) Typ trr at Typ Qrr at V(BR) Max VF at IF 25 C 125 C Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) Family Type I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 200 0.95 4 20 4 A, 200 A/us, 160 V 20 at R.T. VS-5EWH06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 1.85 5 21 5 A, 200 A/us, 390 V 33 at R.T. 5 VS-5EWL06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 1.25 5 154 5 A, 200 A/us, 390 V 826 at R.T. 5 VS-5EWX06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 2.90 5 16 5 A, 200 A/us, 390 V 19 at R.T. 6 VS-6CWH02FNx-M3 I Power Plastic SMD(2)(3)(6) TO-252AA (DPAK) 200 1.00 3 19 3 A, 200 A/us, 160 V 60 at R.T. 6 VS-MURD620CTx-M3 I Power Plastic SMD(2)(3)(6) TO-252AA (DPAK) 200 1.2 6 19 3 A, 200 A/us, 160 V 60 6 VS-6EWH06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 2.10 6 21 6 A, 200 A/us, 390 V 33 at R.T. 6 VS-6EWL06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 1.35 6 173 6 A, 200 A/us, 390 V 988 at R.T. 6 VS-6EWX06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 3.10 6 16 6 A, 200 A/us, 390 V 19 at R.T. 8 VS-8S2TH06I-M I Power Plastic Through Hole(1)(6) ITO-220AC 600 3.1 8 11 8 A, 200 A/us, 390 V 35 8 VS-MUR820PBF I Power Plastic Through Hole(1)(8) TO-220AC 200 0.975 8 20 8 A, 200 A/us, 160 V 23 at R.T. 8 VS-MUR820-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 200 0.975 8 20 8 A, 200 A/us, 160 V 23 at R.T. 8 VS-8ETH03PBF I Power Plastic Through Hole(1)(8) TO-220AC 300 1.25 8 27 8 A, 200 A/us, 200 V 106 8 VS-8ETH03-N3 I TO-220AC 300 1.25 8 27 8 A, 200 A/us, 200 V 106 8 VS-8ETU04PBF I Power Plastic Through Hole(1)(8) TO-220AC 400 1.3 8 43 8 A, 200 A/us, 200 V 210 8 VS-8ETU04-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 400 1.3 8 43 8 A, 200 A/us, 200 V 210 8 VS-8ETH06PBF I Power Plastic Through Hole(1)(8) TO-220AC 600 2.4 8 25 8 A, 200 A/us, 400 V 120 8 VS-ETH0806-M3 I Power Plastic Through Hole(1)(6) TO-220AC 600 2.65 8 21 8 A, 200 A/us, 400 V 110 8 VS-8ETH06-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 600 2.4 8 25 8 A, 200 A/us, 400 V 120 (A) Power Plastic Through Hole (1)(7) 8 VS-8ETL06PBF I TO-220AC 600 1.05 8 170 8 A, 200 A/us, 400 V 2200 8 VS-ETL0806-M3 I Power Plastic Through Hole(1)(8) TO-220AC 600 1.05 8 170 8 A, 200 A/us, 400 V 2200 8 VS-8ETL06-N3 I Power Plastic Through Hole TO-220AC 600 1.05 8 170 8 A, 200 A/us, 400 V 2200 Power Plastic Through Hole (A) Power Plastic Through Hole (1)(8) (1)(7) 8 VS-8ETX06PBF I 8 VS-ETX0806-M3 I Power Plastic Through Hole(1)(6) 8 VS-8ETX06-N3 I Power Plastic Through Hole I Isolated Power Plastic(1)(6) 8 (A) VS-ETH0806FP-M3 (1)(8) (1)(7) Note: 1. Single die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide TO-220AC 600 3 8 17 8 A, 200 A/us, 400 V 88 TO-220AC 600 3.40 8 17 8 A, 200 A/us, 400 V 72 TO-220AC 600 3 8 17 8 A, 200 A/us, 400 V 88 TO-220FPAC 600 2.4 8 25 8 A, 200 A/us, 400 V 120 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free A. Automotive Grade Device available on request 36/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers FRED Pt(R) (Fast Recovery Epitaxial Diodes), continued IF(AV) (A) Package Device Source (5) (4) Family Type Typ trr at Typ Qrr at V(BR) Max VF at IF 25 C 125 C Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) 8 VS-8ETH06FPPBF I Isolated Power Plastic(1)(8) TO-220FPAC 600 2.4 8 25 8 A, 200 A/us, 400 V 120 8 VS-8ETH06FP-N3 I Isolated Power Plastic(1)(7) TO-220FPAC 600 2.4 8 25 8 A, 200 A/us, 400 V 120 8 VS-8ETL06FPPBF I TO-220FPAC 600 1.05 8 170 8 A, 200 A/us, 400 V 2200 8 VS-ETL0806FP-M3 I Isolated Power Plastic(1)(6) TO-220FPAC 600 1.07 8 180 8 A, 200 A/us, 400 V 2400 8 VS-8ETL06FP-N3 I Isolated Power Plastic TO-220FPAC 600 1.05 8 170 8 A, 200 A/us, 400 V 2200 8 VS-8ETX06FPPBF I TO-220FPAC 600 3 8 17 8 A, 200 A/us, 400 V 88 8 VS-ETX0806FP-M3 I (1)(6) Isolated Power Plastic TO-220FPAC 600 3.40 8 17 8 A, 200 A/us, 400 V 72 8 VS-8ETX06FP-N3 I Isolated Power Plastic(1)(7) TO-220FPAC 600 3 8 17 8 A, 200 A/us, 400 V 88 8 VS-8EWH02FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 200 0.97 8 24 8 A, 200 A/us, 160 V 27 at R.T. 8 VS-8CWH02FNx-M3 I Power Plastic SMD(2)(3)(6) TO-252AA (DPAK) 200 0.95 4 20 4A, 200A/us, 160V 20 at R.T. 8 VS-8EWH06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 2.40 8 25 8 A, 200 A/us, 390 V 25 at R.T. 8 VS-8EWL06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 1.05 8 170 8 A, 200 A/us, 390 V 1300 at R.T. 8 VS-8EWX06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 3.40 8 17 8 A, 200 A/us, 390 V 20 at R.T. 8 VS-MURB820-1PBF(A) I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 200 0.975 8 20 8 A, 200 A/us, 160 V 23 at R.T. 8 (A) VS-8ETH03-1PBF I Power Plastic Through Hole TO-262 (I PAK) 300 1.25 8 27 8 A, 200 A/us, 200 V 106 8 VS-8ETU04-1PBF(A) I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 400 1.3 8 43 8 A, 200 A/us, 200 V 210 8 (A) VS-8ETH06-1PBF I Power Plastic Through Hole TO-262 (I PAK) 600 2.4 8 25 8 A, 200 A/us, 400 V 120 8 VS-8ETL06-1PBF(A) I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 600 1.05 8 170 8 A, 200 A/us, 400 V 2200 8 VS-8ETX06-1PBF(A) I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 600 3 8 17 8 A, 200 A/us, 400 V 88 Isolated Power Plastic (1)(8) (1)(7) Isolated Power Plastic(1)(8) (1)(6) (1)(6) 2 2 8 VS-MURB820xPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 8 VS-8ETH03SxPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 300 1.25 8 27 8 A, 200 A/us, 200 V 106 8 VS-8ETU04SxPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 400 1.3 8 43 8 A, 200 A/us, 200 V 210 8 VS-8ETH06SxPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 2.4 8 25 8 A, 200 A/us, 400 V 120 8 VS-8ETL06SxPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 1.05 8 170 8 A, 200 A/us, 400 V 2200 8 VS-8ETX06SxPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 3 8 17 8 A, 200 A/us, 400 V 88 Note: 1. Single die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 200 0.975 8 20 8 A, 200 A/us, 160 V 23 at R.T. 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free A. Automotive Grade Device available on request 37/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers FRED Pt(R) (Fast Recovery Epitaxial Diodes), continued IF(AV) (A) Package Device Source (5) (4) Family Type Typ trr at Typ Qrr at V(BR) Max VF at IF 25 C 125 C Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) 10 VS-MUR1020CTPBF I Power Plastic Through Hole(2) TO-220AB 200 1.25 10 24 5 A, 200 A/us, 160 V 76 10 VS-MUR1020CT-N3(A) I Power Plastic Through Hole(2)(7) TO-220AB 200 1.25 10 24 5 A, 200 A/us, 160 V 76 10 VS-10CWH02FNx-M3 I Power Plastic SMD(2)(3)(6) TO-252AA (DPAK) 200 0.98 5 21 5 A, 200 A/us, 160 V 20 at R.T. Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 200 1.25 10 24 5 A, 200 A/us, 160 V 76 10 VS-MURB1020CT-1PBF(A) I 10 VS-MURB1020CTxPBF(A) I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 200 1.25 10 24 5 A, 200 A/us, 160 V 76 12 VS-12EWH06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 2.50 12 26 12 A, 200 A/us, 390 V 48 at R.T. 15 VS-MUR1520PBF I Power Plastic Through Hole(1)(8) TO-220AC 200 1.05 15 22 15 A, 200 A/us, 160 V 90 15 VS-MUR1520-N3 I TO-220AC 200 1.05 15 22 15 A, 200 A/us, 160 V 90 15 VS-15ETH03PBF I Power Plastic Through Hole(1)(8) TO-220AC 300 1.25 15 32 15 A, 200 A/us, 200 V 137 15 VS-15ETH03-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 300 1.25 15 32 15 A, 200 A/us, 200 V 137 15 VS-15ETH06PBF I Power Plastic Through Hole(1)(8) TO-220AC 600 2.2 15 29 15 A, 200 A/us, 390 V 300 15 VS-ETH1506-M3 I Power Plastic Through Hole(1)(6) TO-220AC 600 2.45 15 29 15 A, 200 A/us, 390 V 240 15 VS-15ETH06-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 600 2.2 15 29 15 A, 200 A/us, 390 V 300 15 VS-ETU1506-M3 I Power Plastic Through Hole TO-220AC 600 1,9 15 40 15 A, 200 A/us, 390 V 730 15 VS-15ETL06PBF I Power Plastic Through Hole(1)(8) TO-220AC 600 1.05 15 220 15 A, 200 A/us, 390 V 4300 15 VS-ETL1506-M3 I Power Plastic Through Hole(1)(6) TO-220AC 600 1.07 15 210 15 A, 200 A/us, 390 V 4000 15 VS-15ETL06-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 600 1.05 15 220 15 A, 200 A/us, 390 V 4300 TO-220AC 600 3.2 15 22 15 A, 200 A/us, 390 V 150 TO-220AC 600 3.40 15 20 15 A, 200 A/us, 390 V 135 (A) Power Plastic Through Hole (1)(7) (1)(6) 15 VS-15ETX06PBF I 15 VS-ETX1506-M3 I Power Plastic Through Hole(1)(6) 15 (A) VS-15ETX06-N3 I Power Plastic Through Hole TO-220AC 600 3.2 15 22 15 A, 200 A/us, 390 V 150 15 VS-15ETH06FPPBF I Isolated Power Plastic(1)(8) TO-220FPAC 600 2.2 15 29 15 A, 200 A/us, 390 V 300 15 VS-ETH1506FP-M3 I Isolated Power Plastic(1)(6) TO-220FPAC 600 2.2 15 29 15 A, 200 A/us, 390 V 300 15 VS-15ETH06FP-N3 I Isolated Power Plastic(1)(7) TO-220FPAC 600 2.2 15 29 15 A, 200 A/us, 390 V 300 15 VS-ETU1506FP-M3 I Isolated Power Plastic TO-220FPAC 600 1,9 15 40 15 A, 200 A/us, 390 V 730 15 VS-15ETL06FPPBF I Isolated Power Plastic(1)(8) TO-220FPAC 600 1.05 15 220 15 A, 200 A/us, 390 V 4300 15 VS-ETL1506FP-M3 I Isolated Power Plastic(1)(6) TO-220FPAC 600 1.07 15 210 15 A, 200 A/us, 390 V 4000 15 VS-15ETL06FP-N3 I Isolated Power Plastic(1)(7) TO-220FPAC 600 1.05 15 220 15 A, 200 A/us, 390 V 4300 15 VS-15ETX06FPPBF I Isolated Power Plastic 15 VS-ETX1506FP-M3 15 VS-15ETX06FP-N3 Power Plastic Through Hole (1)(8) (1)(7) (1)(6) TO-220FPAC 600 3.2 15 22 15 A, 200 A/us, 390 V 150 I (1)(6) Isolated Power Plastic TO-220FPAC 600 3.40 15 20 15 A, 200 A/us, 390 V 135 I Isolated Power Plastic(1)(7) TO-220FPAC 600 3.2 15 22 15 A, 200 A/us, 390 V 150 (1)(8) Note: 1. Single die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free A. Automotive Grade Device available on request 38/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers FRED Pt(R) (Fast Recovery Epitaxial Diodes), continued IF(AV) (A) Package Device Source (5) (4) Family Type Typ trr at Typ Qrr at V(BR) Max VF at IF 25 C 125 C Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) 15 VS-15AWL06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 1.05 15 250 15 A, 200 A/us, 390 V 4000 15 VS-15EWH06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 2.10 15 31 15 A, 200 A/us, 390 V 60 at R.T. 15 VS-15EWL06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 1.05 15 250 15 A, 200 A/us, 390 V 4000 15 VS-15EWX06FNx-M3 I Power Plastic SMD(1)(3)(6) TO-252AA (DPAK) 600 3.20 15 22 15 A, 200 A/us, 390 V 29 at R.T. 15 VS-MURB1520-1PBF(A) I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 200 1.05 15 22 15 A, 200 A/us, 160 V 90 15 VS-15ETH03-1PBF(A) I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 300 1.25 15 32 15 A, 200 A/us, 200 V 137 15 VS-15ETH06-1PBF I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 600 2.2 15 29 15 A, 200 A/us, 390 V 300 15 VS-ETH1506-1-M3(A) I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 600 2.25 15 29 15 A, 200 A/us, 390 V 280 15 VS-15ETL06-1PBF I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 600 1.05 15 220 15 A, 200 A/us, 390 V 4300 15 VS-ETL1506-1-M3(A) I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 600 1.07 15 210 15 A, 200 A/us, 390 V 4000 15 VS-ETU1506-1-M3(A) I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 600 1.9 15 40 15 A, 200 A/us, 390 V 730 15 VS-15ETX06-1PBF I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 600 3.2 15 22 15 A, 200 A/us, 390 V 150 15 (A) VS-ETX1506-1-M3 I 3.4 15 20 15 A, 200 A/us, 390 V 140 15 VS-MURB1520xPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 200 1.05 15 22 15 A, 200 A/us, 160 V 90 15 VS-15ETH03SxPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 300 1.25 15 32 15 A, 200 A/us, 200 V 137 15 VS-15ETH06SxPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 2.2 15 29 15 A, 200 A/us, 390 V 300 15 VS-ETH1506Sx-M3(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 2.25 15 29 15 A, 200 A/us, 390 V 280 15 VS-ETU1506Sx-M3(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 1.9 15 40 15 A, 200 A/us, 390 V 730 15 VS-15ETL06SxPBF I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 1.05 15 220 15 A, 200 A/us, 390 V 4300 15 VS-ETL1506Sx-M3(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 1.07 15 210 15 A, 200 A/us, 390 V 4000 15 VS-15ETX06SxPBF I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 3.2 15 22 15 A, 200 A/us, 390 V 150 15 VS-ETX1506Sx-M3(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 3.4 15 20 15 A, 200 A/us, 390 V 140 16 VS-MUR1620CTPBF I Power Plastic Through Hole(2)(8) TO-220AB 200 0.975 8 20 8 A, 200 A/us, 160 V 23 at R.T. Power Plastic Through Hole (1)(6) Note: 1. Single die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide TO-262 (I PAK) 600 2 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free A. Automotive Grade Device available on request 39/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers FRED Pt(R) (Fast Recovery Epitaxial Diodes), continued IF(AV) (A) Package Device Source (5) (4) Family Type Typ trr at Typ Qrr at V(BR) Max VF at IF 25 C 125 C Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) 16 VS-MUR1620CT-N3(A) I Power Plastic Through Hole(2)(7) TO-220AB 200 0.975 8 20 8 A, 200 A/us, 160 V 23 at R.T. 16 VS-16CTU04PBF I Power Plastic Through Hole(2)(8) TO-220AB 400 1.3 8 43 8 A, 200 A/us, 200 V 210 16 VS-16CTU04-N3 I TO-220AB 400 1.3 8 43 8 A, 200 A/us, 200 V 210 16 VS-MURB1620CT-1PBF(A) I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 200 0.975 8 20 8 A, 200 A/us, 160 V 23 at R.T. 16 I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 400 8 43 8 A, 200 A/us, 200 V 210 (A) VS-16CTU04-1PBF(A) Power Plastic Through Hole (2)(7) 1.3 16 VS-MURB1620CTxPBF(A) I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 16 VS-16CTU04SxPBF(A) I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 400 1.3 8 43 20 VS-MUR2020CTPBF I Power Plastic Through Hole(2)(8) TO-220AB 200 1.15 16 21 10 A, 200 A/us, 160 V 25 at R.T. 20 VS-MUR2020CT-N3(A) I Power Plastic Through Hole(2)(7) TO-220AB 200 1.15 16 21 10 A, 200 A/us, 160 V 25 at R.T. 20 VS-20CTH03PBF I Power Plastic Through Hole(2)(8) TO-220AB 300 1.25 10 31 10 A, 200 A/us, 200 V 120 20 VS-20CTH03-N3(A) I Power Plastic Through Hole(2)(7) TO-220AB 300 1.25 10 31 10 A, 200 A/us, 200 V 120 20 VS-20CTH03FPPBF I 20 VS-20CTH03FP-N3 I Isolated Power Plastic (2)(8) Isolated Power Plastic(2)(7) 200 0.975 8 20 8 A, 200 A/us, 160 V 23 at R.T. 8 A, 200 A/us, 200 V 210 TO-220FPAB 300 1.25 10 31 10 A, 200 A/us, 200 V 120 TO-220FPAB 300 1.25 10 31 10 A, 200 A/us, 200 V 120 20 VS-MURB2020CT-1PBF(A) I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 200 1.15 16 21 10 A, 200 A/us, 160 V 25 at R.T. 20 I Power Plastic Through Hole 1.25 10 31 10 A, 200 A/us, 200 V 120 VS-20CTH03-1PBF (A) (2)(6) TO-262 (I PAK) 300 2 20 VS-MURB2020CTxPBF(A) I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 20 VS-20CTH03SxPBF(A) I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 300 1.25 10 31 30 VS-30CTH02PBF I Power Plastic Through Hole(2)(8) TO-220AB 200 1.05 15 26 15 A, 200 A/us, 160 V 37 at R.T. 30 VS-30CTH02-N3 I Power Plastic Through Hole(2)(7) TO-220AB 200 1.05 15 26 15 A, 200 A/us, 160 V 37 at R.T. 30 VS-30CTH03PBF I Power Plastic Through Hole(2)(8) TO-220AB 300 1.25 15 33 15 A, 200 A/us, 200 V 160 30 VS-30CTH03-N3 I Power Plastic Through Hole(2)(7) TO-220AB 300 1.25 15 33 15 A, 200 A/us, 200 V 160 30 VS-30ETH06PBF I TO-220AC 600 2.6 30 31 30 A, 200 A/us, 200 V 345 30 VS-ETH3006-M3 I Power Plastic Through Hole(1)(6) TO-220AC 600 2.65 30 26 30 A, 200 A/us, 200 V 280 30 VS-ETU3006-M3 I (1)(6) Power Plastic Through Hole TO-220AC 600 2.00 30 45 30 A, 200 A/us, 200 V 580 30 VS-30ETH06-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 600 2.6 30 31 30 A, 200 A/us, 200 V 345 (A) (A) Power Plastic Through Hole (1)(8) 200 1.15 16 21 10 A, 200 A/us, 160 V 25 at R.T. 10 A, 200 A/us, 200 V 120 30 VS-30CTH02FPPBF I 30 VS-30CTH02FP-N3 I Isolated Power Plastic(2)(7) 30 VS-30ETH06FP-F3 I Isolated Power Plastic(1)(7) TO-220FPAB 600 2.60 30 31 30 A, 200 A/us, 200 V 345 30 VS-ETH3006FP-M3 I Isolated Power Plastic(1)(6) TO-220FPAB 600 2.65 30 26 30 A, 200 A/us, 200 V 280 30 VS-ETU3006FP-M3 I Isolated Power Plastic(1)(6) TO-220FPAB 600 2.00 30 45 30 A, 200 A/us, 200 V 580 Isolated Power Plastic (2)(8) Note: 1. Single die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide TO-220FPAB 200 1.05 15 26 15 A, 200 A/us, 160 V 37 at R.T. TO-220FPAB 200 1.05 15 26 15 A, 200 A/us, 160 V 37 at R.T. 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free A. Automotive Grade Device available on request 40/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers FRED Pt(R) (Fast Recovery Epitaxial Diodes), continued IF(AV) (A) Package Device Source (5) (4) Family Type Typ trr at Typ Qrr at V(BR) Max VF at IF 25 C 125 C Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) 30 VS-30ETH06FP-N3 I Isolated Power Plastic(1)(7) TO-220FPAB 600 2.6 30 31 30 A, 200 A/us, 200 V 345 30 VS-MUR3020WTPBF I Power Plastic Through Hole(2)(8) TO-247AC 200 1.05 15 22 15 A, 200 A/us, 160 V 19 at R.T. 30 VS-MUR3020WT-N3(A) I Power Plastic Through Hole(2)(7) TO-247AC 200 1.05 15 22 15 A, 200 A/us, 160 V 19 at R.T. 30 VS-30CPH03PBF I Power Plastic Through Hole(2)(8) TO-247AC 300 1.25 15 33 15 A, 200 A/us, 200 V 160 30 VS-30CPH03-N3 I TO-247AC 300 1.25 15 33 15 A, 200 A/us, 200 V 160 30 VS-30CPU04PBF I Power Plastic Through Hole(2)(8) TO-247AC 400 1.25 15 46 15 A, 200 A/us, 200 V 345 30 VS-30CPU04-N3(A) I Power Plastic Through Hole(2)(7) TO-247AC 400 1.25 15 46 15 A, 200 A/us, 200 V 345 300 1.25 30 38 30 A, 200 A/us, 200 V 190 (A) Power Plastic Through Hole (2)(7) 30 VS-30EPH03PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 30 VS-30EPH03-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 300 1.25 30 38 30 A, 200 A/us, 200 V 190 30 VS-30EPH06PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 600 2.6 30 31 30 A, 200 A/us, 200 V 345 30 VS-30EPH06-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 600 2.6 30 31 30 A, 200 A/us, 200 V 345 30 VS-APH3006-F3 I Power Plastic Through Hole(1)(8) TO-247AC (mod) 600 2.60 30 36 30 A, 200 A/us, 200 V 280 30 VS-APH3006-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 600 2.60 30 36 30 A, 200 A/us, 200 V 280 30 VS-EPH3006-F3 I Power Plastic Through Hole(1)(8) TO-247AC (mod) 600 2.60 30 36 30 A, 200 A/us, 200 V 280 30 VS-EPH3006-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 600 2.60 30 36 30 A, 200 A/us, 200 V 280 30 VS-EPU3006-F3 I Power Plastic Through Hole(1)(8) TO-247AC (mod) 600 2.00 30 45 30 A, 200 A/us, 200 V 580 30 VS-EPU3006-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 600 2.00 30 45 30 A, 200 A/us, 200 V 580 30 VS-APU3006-F3 I Power Plastic Through Hole(1)(8) TO-247AC (mod) 600 2.00 30 45 30 A, 200 A/us, 200 V 580 30 VS-APU3006-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 600 2.00 30 45 30 A, 200 A/us, 200 V 580 30 VS-30CTH02-1PBF(A) I Power Plastic Through Hole(2)(6) TO-262 (I2PAK) 200 1.05 15 26 15 A, 200 A/us, 160 V 37 at R.T. 30 VS-30ETH06-1PBF I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 600 2.6 30 31 30 A, 200 A/us, 200 V 345 30 (A) VS-ETH3006-1-M3 I Power Plastic Through Hole TO-262 (I PAK) 600 2.6 30 26 30 A, 200 A/us, 200 V 280 30 VS-ETU3006-1-M3(A) I Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 600 2.00 30 45 30 A, 200 A/us, 200 V 580 (1)(6) Note: 1. Single die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 2 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free A. Automotive Grade Device available on request 41/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers FRED Pt(R) (Fast Recovery Epitaxial Diodes), continued IF(AV) (A) Package Device (5) Source (4) Family Type Typ trr at Typ Qrr at V(BR) Max VF at IF 25 C 125 C Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) 30 VS-30CTH02SxPBF(A) I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 200 1.05 15 26 15 A, 200 A/us, 160 V 37 at R.T. 30 VS-30ETH06SxPBF I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 2.6 30 31 30 A, 200 A/us, 200 V 345 30 VS-ETH3006Sx-M3(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 2.6 30 26 30 A, 200 A/us, 200 V 280 30 VS-ETU3006Sx-M3(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 2.00 30 45 30 A, 200 A/us, 200 V 580 60 VS-60CPU02-F I Power Plastic Through Hole(2)(8) TO-247AC 200 1.1 30 30 30 A, 200 A/us, 160 V 160 60 VS-60CPU02-N3(A) I Power Plastic Through Hole(2)(7) TO-247AC 200 1.1 30 30 30 A, 200 A/us, 160 V 160 60 VS-60CPH03PBF I 60 VS-60CPH03-N3(A) I 60 VS-60CPU04-F3 I 60 VS-60CPU04-N3(A) I Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) TO-247AC 300 1.25 30 39 30 A, 200 A/us, 200 V 214 TO-247AC 300 1.25 30 39 30 A, 200 A/us, 200 V 214 TO-247AC 400 1.30 30 65 30 A, 200 A/us, 200 V 874 TO-247AC 400 1.30 30 65 30 A, 200 A/us, 200 V 874 60 VS-60CPU06-F I TO-247AC 600 1.65 30 42 30 A, 200 A/us, 200 V 630 60 VS-60CPU06-N3(A) I Power Plastic Through Hole(2)(7) TO-247AC 600 1.65 30 42 30 A, 200 A/us, 200 V 630 60 VS-60APU02PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 200 1.08 60 28 60 A, 200 A/us, 160 V 220 60 VS-60APU02-N3(A) I Power Plastic Through Hole(1)(8) TO-247AC (mod) 200 1.08 60 28 60 A, 200 A/us, 160 V 220 60 VS-60APU04PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 400 1.25 60 85 60 A, 200 A/us, 200 V 1120 60 VS-60APU04-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 400 1.25 60 85 60 A, 200 A/us, 200 V 1120 60 VS-60APU06PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 600 1.68 60 81 60 A, 200 A/us, 200 V 1394 60 VS-60APU06-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 600 1.68 60 81 60 A, 200 A/us, 200 V 1394 60 VS-60EPU02PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 200 1.08 60 28 60 A, 200 A/us, 160 V 220 60 VS-60EPU02-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 200 1.08 60 28 60 A, 200 A/us, 160 V 220 60 VS-60EPU04PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 400 1.25 60 85 60 A, 200 A/us, 200 V 1120 60 VS-60EPU04-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 400 1.25 60 85 60 A, 200 A/us, 200 V 1120 Power Plastic Through Hole (2)(8) Note: 1. Single die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free A. Automotive Grade Device available on request 42/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers FRED Pt(R) (Fast Recovery Epitaxial Diodes), continued IF(AV) (A) Package Device Source (5) (4) Family Type Typ trr at Typ Qrr at V(BR) Max VF at IF 25 C 125 C Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) 60 VS-60EPU06PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 600 1.68 60 81 60 A, 200 A/us, 200 V 1394 60 VS-60EPU06-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 600 1.68 60 81 60 A, 200 A/us, 200 V 1394 80 VS-80EBU02(A) I Power Plastic Through Hole(1)(8) POWERTABTM 200 1.13 80 32 80 A, 200 A/us, 160 V 240 POWERTABTM 400 1.3 80 87 80 A, 200 A/us, 200 V 1300 TO-247AC 200 0.90 40 33 40 A, 200 A/us, 200 V 216 80 VS-80EBU04 I Power Plastic Through Hole 80 VS-80CPU02-F3 I Power Plastic Through Hole(2)(8) 80 VS-80CPU02-N3 I 80 VS-80CPH03-F3 I Power Plastic Through Hole(2)(8) 80 VS-80CPH03-N3(A) I Power Plastic Through Hole(2)(7) TO-247AC 300 1.25 40 41 40 A, 200 A/us, 200 V 265 150 VS-150EBU02(A) I Power Plastic Through Hole(1)(8) POWERTABTM 200 1.13 150 34 150 A, 200 A/us, 160 V 300 150 VS-150EBU04(A) I Power Plastic Through Hole(1)(8) POWERTABTM 400 1.3 150 93 150 A, 200 A/us, 200 V 1740 (A) (A) (1)(8) Power Plastic Through Hole (2)(7) Note: 1. Single die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide TO-247AC 200 0.90 40 33 40 A, 200 A/us, 200 V 216 TO-247AC 300 1.25 40 41 40 A, 200 A/us, 200 V 265 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free A. Automotive Grade Device available on request 43/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 HEXFRED(R) Package IF(AV) (A) Device(5) 4 VS-HFA04TB60PBF I 4 VS-HFA04TB60-N3 I Source(4) Family Type Power Plastic Through Hole(1)(8) TO-220AC 600 1.8 4 28 4 A, 200 A/us, 200 V 70 TO-220AC 600 1.8 4 28 4 A, 200 A/us, 200 V 70 4 VS-HFA04SD60SxPBF(A) I Power Plastic SMD(1)(3)(9) TO-252 (DPAK) 600 1.8 4 28 4 A, 200 A/us, 200 V 70 4 VS-HFA04SD60Sx-M3 I Power Plastic SMD TO-252 (DPAK) 600 1.8 4 28 4 A, 200 A/us, 200 V 70 4 A, 200 A/us, 200 V 70 (A) (A) Power Plastic Through Hole Typ trr at Typ Qrr at V(BR) Max VF at IF see setup see setup Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) (1)(7) (1)(3)(6) TO-263AB (D2PAK) 600 1.8 4 28 4 VS-HFA04TB60SxPBF(A) I Power Plastic SMD(1)(3)(6) 6 VS-HFA06TB120PBF I Power Plastic Through Hole(1)(8) TO-220AC 1200 3 6 53 6 A, 200 A/us, 200 V 233 6 VS-HFA06TB120-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 1200 3 6 53 6 A, 200 A/us, 200 V 233 6 VS-HFA06PB120PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 1200 3 6 53 6 A, 200 A/us, 200 V 233 6 VS-HFA06PB120-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 1200 3 6 53 6 A, 200 A/us, 200 V 233 6 VS-HFA06TB120SxPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 1200 3 6 53 6 A, 200 A/us, 200 V 233 8 VS-HFA08TA60CPBF I Power Plastic Through Hole(2)(8) TO-220AB 600 2.2 8 28 4 A, 200 A/us, 200 V 70 8 VS-HFA08TA60C-N3 I Power Plastic Through Hole(2)(7) TO-220AB 600 2.2 8 28 4 A, 200 A/us, 200 V 70 8 VS-HFA08TB60PBF I TO-220AC 600 1.7 8 37 8 A, 200 A/us, 200 V 124 8 VS-HFA08TB60-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 600 1.7 8 37 8 A, 200 A/us, 200 V 124 8 VS-HFA08PB60PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 600 1.7 8 37 8 A, 200 A/us, 200 V 124 8 VS-HFA08PB60-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 600 1.7 8 37 8 A, 200 A/us, 200 V 124 8 VS-HFA08SD60SxPBF(A) I Power Plastic SMD(1)(3)(9) TO-252 (DPAK) 600 1.7 8 37 8 A, 200 A/us, 200 V 124 8 VS-HFA08SD60Sx-M3 I Power Plastic SMD TO-252 (DPAK) 600 1.7 8 37 8 A, 200 A/us, 200 V 124 (A) (A) Power Plastic Through Hole (1)(8) (1)(3)(6) 8 VS-HFA08TA60CSxPBF(A) I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 8 VS-HFA08TB60SxPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 600 1.7 8 37 8 VS-HFA08TB120PBF I Power Plastic Through Hole(1)(8) TO-220AC 1200 3.3 8 63 8 A, 200 A/us, 200 V 335 8 VS-HFA08TB120-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 1200 3.3 8 63 8 A, 200 A/us, 200 V 335 8 VS-HFA08PB120PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 1200 3.3 8 63 8 A, 200 A/us, 200 V 335 8 VS-HFA08PB120-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 1200 3.3 8 63 8 A, 200 A/us, 200 V 335 Note: 1. Single die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 600 2.2 8 28 4 A, 200 A/us, 200 V 70 8 A, 200 A/us, 200 V 124 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free A. Automotive Grade Device available on request 44/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HEXFRED(R), continued IF(AV) (A) Package Device Source (5) (4) Typ trr at Typ Qrr at V(BR) Max VF at IF see setup see setup Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) Family Type TO-263AB (D2PAK) 1200 3.3 8 63 8 A, 200 A/us, 200 V 335 TO-247AC 1200 3.9 12 53 6 A, 200 A/us, 200 V 233 8 VS-HFA08TB120SxPBF(A) I Power Plastic SMD(1)(3)(6) 12 VS-HFA12PA120CPBF I Power Plastic Through Hole(2)(8) 12 VS-HFA12PA120C-N3 I TO-247AC 1200 3.9 12 53 6 A, 200 A/us, 200 V 233 15 VS-HFA15TB60PBF I Power Plastic Through Hole(1)(8) TO-220AC 600 1.7 15 42 15 A, 200 A/us, 200 V 241 15 VS-HFA15TB60-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 600 1.7 15 42 15 A, 200 A/us, 200 V 241 600 1.7 15 42 15 A, 200 A/us, 200 V 241 600 1.7 15 42 15 A, 200 A/us, 200 V 241 Power Plastic Through Hole(1)(6) TO-262 (I2PAK) 600 1.7 15 42 15 A, 200 A/us, 200 V 241 (A) Power Plastic Through Hole (2)(7) 15 VS-HFA15PB60PBF I Power Plastic Through Hole (1)(8) TO-247AC (mod) 15 VS-HFA15PB60-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 15 VS-HFA15TB60-1PBF(A) I 15 VS-HFA15TB60SxPBF(A) I Power Plastic SMD(1)(3)(6) 16 VS-HFA16TA60CPBF I Power Plastic Through Hole(2)(8) TO-263AB (D2PAK) 600 1.7 15 50 15 A, 200 A/us, 200 V 241 TO-220AB 600 2.1 16 37 8 A, 200 A/us, 200 V 124 TO-220AB 600 2.1 16 37 8 A, 200 A/us, 200 V 124 TO-247AC 600 2.1 16 37 8 A, 200 A/us, 200 V 124 TO-247AC 600 2.1 16 37 8 A, 200 A/us, 200 V 124 TO-263AB (D2PAK) 600 2.1 16 37 8 A, 200 A/us, 200 V 124 16 VS-HFA16TA60C-N3 I 16 VS-HFA16PA60CPBF I 16 VS-HFA16PA60C-N3 I 16 VS-HFA16TA60CSxPBF(A) I Power Plastic SMD(2)(3)(6) 16 VS-HFA16TB120PBF I Power Plastic Through Hole(1)(8) TO-220AC 1200 3 16 90 16 A, 200 A/us, 200 V 680 16 VS-HFA16TB120-N3(A) I Power Plastic Through Hole(1)(7) TO-220AC 1200 3 16 90 16 A, 200 A/us, 200 V 680 16 VS-HFA16PA120CPBF I TO-247AC 1200 4.3 16 63 8 A, 200 A/us, 200 V 335 16 VS-HFA16PA120C-N3(A) I Power Plastic Through Hole(2)(7) TO-247AC 1200 4.3 16 63 8 A, 200 A/us, 200 V 335 16 VS-HFA16PB120PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 1200 3 16 90 16 A, 200 A/us, 200 V 680 16 VS-HFA16PB120-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 1200 3 16 90 16 A, 200 A/us, 200 V 680 16 VS-HFA16TB120SxPBF(A) I Power Plastic SMD(1)(3)(6) TO-263AB (D2PAK) 1200 3 16 90 16 A, 200 A/us, 200 V 680 25 VS-HFA25TB60PBF I Power Plastic Through Hole(1)(8) TO-220AC 600 1.7 25 50 25 A, 200 A/us, 200 V 420 25 VS-HFA25TB60-N3 I Power Plastic Through Hole(1)(7) TO-220AC 600 1.7 25 50 25 A, 200 A/us, 200 V 420 25 VS-HFA25PB60PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 600 1.7 25 50 25 A, 200 A/us, 200 V 420 25 VS-HFA25PB60-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 600 1.7 25 50 25 A, 200 A/us, 200 V 420 (A) (A) (A) Power Plastic Through Hole (2)(7) Power Plastic Through Hole(2)(8) Power Plastic Through Hole (2)(7) Power Plastic Through Hole (2)(8) Note: 1. Single die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free A. Automotive Grade Device available on request 45/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Ultrafast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers HEXFRED(R), continued IF(AV) (A) Package Device Source (5) (4) Family Type TO-263AB (D2PAK) 600 1.7 25 50 25 A, 200 A/us, 200 V 420 TO-220AB 600 2 30 42 15 A, 200 A/us, 200 V 220 TO-220AB 600 2 30 42 15 A, 200 A/us, 200 V 220 TO-247AC 600 2 30 42 15 A, 200 A/us, 200 V 220 TO-247AC 600 2 30 42 15 A, 200 A/us, 200 V 220 600 2 30 42 15 A, 200 A/us, 200 V 220 25 VS-HFA25TB60SxPBF(A) I Power Plastic SMD(1)(3)(6) 30 VS-HFA30TA60CPBF I Power Plastic Through Hole(2)(8) 30 VS-HFA30TA60-N3 I 30 VS-HFA30PA60CPBF I 30 VS-HFA30PA60C-N3 I (A) (A) Typ trr at Typ Qrr at V(BR) Max VF at IF see setup see setup Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) Power Plastic Through Hole (2)(7) Power Plastic Through Hole(2)(8) Power Plastic Through Hole (2)(7) 30 VS-HFA30TA60CSxPBF(A) I Power Plastic SMD(2)(3)(6) TO-263AB (D2PAK) 30 VS-HFA30PB120PBF I Power Plastic Through Hole(1)(8) TO-247AC (mod) 1200 4.1 30 110 30 A, 200 A/us, 200 V 1540 30 VS-HFA30PB120-N3(A) I Power Plastic Through Hole(1)(7) TO-247AC (mod) 1200 4.1 30 110 30 A, 200 A/us, 200 V 1540 32 VS-HFA32PA120CPBF I Power Plastic Through Hole(2)(8) TO-247AC 1200 3.93 32 90 16 A, 200 A/us, 200 V 680 32 VS-HFA32PA120C-N3(A) I Power Plastic Through Hole(2)(7) TO-247AC 1200 3.93 32 90 16 A, 200 A/us, 200 V 680 50 VS-HFA50PA60CPBF I TO-247AC 600 2 50 50 25 A, 200 A/us, 200 V 420 50 VS-HFA50PA60C-N3(A) I TO-247AC 600 2 50 50 25 A, 200 A/us, 200 V 420 Power Plastic Through Hole (2)(8) Power Plastic Through Hole(2)(7) Note: 1. Single die device 2. Dual center-tapped device (VF limit at IF is per diode) 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free mould compound and RoHs compliant 7. Halogen free mould compound and RoHs compliant and totally lead free 8. RoHs compliant and totally lead free A. Automotive Grade Device available on request 46/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers I INNOVAT O L OGY Ultrafast Recover y Rectifiers AND TEC N HN Rectifiers O 19 62-2012 Ultrafast Avalanche Rated Sinterglass Diodes Part Number VR VRRM VRWM (V) IFAV (A) IFSM at tp = 10 ms (A) VF 25 C (V) At IF (A) IR at Tj 25 C (A) IR High Temp. (A) At Tj (C) BYT53A 50 1.9 50 1.1 1 5 200 150 - 55 175 BYT53B 100 1.9 50 1.1 1 5 200 150 - 55 BYT53C 150 1.9 50 1.1 1 5 200 150 - 55 BYT53D 200 1.9 50 1.1 1 5 200 150 BYT53F 300 1.9 50 1.1 1 5 200 150 Tj, TSTG Tj, TSTG t Max. Min. Max. rr (ns) (C) (C) ER (mJ) At IR (A) 50 20 1.0 175 50 20 1.0 175 50 20 1.0 - 55 175 50 20 1.0 - 55 175 50 20 1.0 BYT53G 400 1.9 50 1.1 1 5 200 150 - 55 175 50 20 1.0 BYV26A 200 1.0 30 2.5 1 5 100 150 - 55 175 30 10 1.0 BYV26B 400 1.0 30 2.5 1 5 100 150 - 55 175 30 10 1.0 BYV26C 600 1.0 30 2.5 1 5 100 150 - 55 175 30 10 1.0 BYV26D 800 1.0 30 2.5 1 5 100 150 - 55 175 75 10 1.0 BYV26E 1000 1.0 30 2.5 1 5 100 150 - 55 175 75 10 1.0 BYV27-50 50 2.0 50 1.07 3 1 150 165 - 55 175 25 20 1.0 BYV27-100 100 2.0 50 1.07 3 1 150 165 - 55 175 25 20 1.0 BYV27-150 150 2.0 50 1.07 3 1 150 165 - 55 175 25 20 1.0 BYV27-200 200 2.0 50 1.07 3 1 150 165 - 55 175 25 20 1.0 BYV27-600 600 2.0 50 1.35 3 5 150 150 - 55 175 40 10 0.4 BYV28-50 50 3.5 90 1.1 5 1 150 165 - 55 175 30 20 1.0 BYV28-100 100 3.5 90 1.1 5 1 150 165 - 55 175 30 20 1.0 BYV28-150 150 3.5 90 1.1 5 1 150 165 - 55 175 30 20 1.0 BYV28-200 200 3.5 90 1.1 5 1 150 165 - 55 175 30 20 1.0 BYV28-600 600 3.5 90 1.35 5 5 150 150 - 55 175 50 20 1.0 BYV98-50 100 4.0 70 1.1 5 10 200 150 - 55 175 35 20 1.0 BYV98-100 150 4.0 70 1.1 5 10 200 150 - 55 175 35 20 1.0 BYV98-150 150 4.0 70 1.1 5 10 200 150 - 55 175 35 20 1.0 BYV98-200 200 4.0 70 1.1 5 10 200 150 - 55 175 35 20 1.0 BYW178 800 3.0 80 1.9 3 1 20 100 - 55 175 60 20 0.4 SF1200 1200 1.0 30 3.4 1 5 50 125 - 55 175 75 10 0.4 SF1600 1600 1.0 30 3.4 1 5 50 125 - 55 175 75 10 0.4 SF4001 50 1.0 30 1.0 1 5 50 125 - 55 175 50 10 0.4 SF4002 100 1.0 30 1.0 1 5 50 125 - 55 175 50 10 0.4 SF4003 200 1.0 30 1.0 1 5 50 125 - 55 175 50 10 0.4 SF4004 400 1.0 30 1.0 1 5 50 125 - 55 175 50 10 0.4 SF4005 600 1.0 30 1.7 1 5 50 125 - 55 175 75 10 0.4 SF4006 800 1.0 30 1.7 1 5 50 125 - 55 175 75 10 0.4 SF4007 100 1.0 30 1.7 1 5 50 125 - 55 175 75 10 0.4 SF5400 50 3.0 150 1.1 3 5 50 125 - 55 175 50 10 0.4 Note: ER = pulse energy in avalanche mode selector guide 47/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . I INNOVAT O L OGY Ultrafast Recover y Rectifiers AND TEC N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Ultrafast Avalanche Rated Sinterglass Diodes, continued Part Number VR VRRM VRWM (V) IFAV (A) IFSM at tp = 10 ms (A) VF 25 C (V) At IF (A) IR at Tj 25 C (A) IR High Temp. (A) At Tj (C) SF5401 100 3.0 150 1.1 3 5 50 125 - 55 175 SF5402 200 3.0 150 1.1 3 5 50 125 - 55 175 SF5403 300 3.0 150 1.1 3 5 50 125 - 55 SF5404 400 3.0 150 1.1 3 5 50 125 - 55 SF5405 500 3.0 150 1.7 3 5 50 125 SF5406 600 3.0 150 1.7 3 5 50 125 SF5407 800 3.0 150 1.7 3 5 50 SF5408 1000 3.0 150 1.7 3 5 50 Tj, TSTG Tj, TSTG t Max. Min. Max. rr (ns) (C) (C) ER (mJ) At IR (A) 50 10 0.4 50 10 0.4 175 50 10 0.4 175 50 10 0.4 - 55 175 75 10 0.4 - 55 175 75 10 0.4 125 - 55 175 75 10 0.4 125 - 55 175 75 10 0.4 Note: ER = pulse energy in avalanche mode selector guide 48/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers I INNOVAT O L OGY Standard and Fast Recover y Rectifiers AND TEC N HN Rectifiers O 19 62-2012 Standard Rectifiers are for low-frequency general purpose use in consumer applications. Typical reverse recovery times are approximately 2 s. These products are offered with forward current ratings of 0.25 A to 8 A and reverse voltages as high as 4000 V. They are available in plastic, glass, and Superectifier(R) constructions. IF(AV) (A) Device(1) Package Max VF at IF Family Type V(BR) Range (V) (V) (A) 0.25 GI250-1 to GI250-4 Superectifier Axial DO-204AL (DO-41) 1000 to 4000 3.5 0.25 0.25 GP02-20 to GP02-40 Superectifier Axial DO-204AL (DO-41) 2000 to 4000 3.0 1.0 0.5 GL34A to GL34J Superectifier SMD DO-213AA (MiniMELF) 50 to 600 1.2 / 1.3 0.5 0.8 GP08A to GP08J Superectifier Axial DO-204AL (DO-41) 50 to 600 1.3 0.8 1.0 1N3611GP to 1N3614GP and 1N3957GP Superectifier Axial DO-204AL (DO-41) 200 to 1000 1.0 1.0 1.0 1N4001 to 1N4007 Plastic Axial DO-204AL (DO-41) 50 to 1000 1.1 1.0 1.0 1N4001GP to 1N4007GP Superectifier Axial DO-204AL (DO-41) 50 to 1000 1.1 1.0 1.0 1N4245GP to 1N4249GP Superectifier Axial DO-204AL (DO-41) 200 to 1000 1.2 1.0 1.0 1N4383GP to 1N4385GP Superectifier Axial DO-204AC (DO-15) 200 to 600 1.0 1.0 1.0 1N4585GP and 1N4586GP Superectifier Axial DO-204AC (DO-15) 800 to 1000 1.0 1.0 1.0 1N5059GP to 1N5062GP Superectifier Axial DO-204AC (DO-15) 200 to 800 1.2 1.0 1.0 1N5614GP to 1N5622GP Superectifier Axial DO-204AC (DO-15) 200 to 1000 1.2 1.0 1.0 1N6478 to 1N6484 Superectifier SMD DO-213AB (MELF) 50 to 1000 1.1 1.0 1.0 BYM10-50 to BYM10-1000 Superectifier SMD DO-213AB (MELF) 50 to 1000 1.1 / 1.2 1.0 1.0 GF1A to GF1M Superectifier SMD DO-214BA (GF1) 50 to 1000 1.1 / 1.2 1.0 1.0 Gl1-1200GP to GI1-1600GP Superectifier Axial DO-204AC (DO-15) 1200 to 1600 1.1 1.0 1.0 GL41A to GL41Y Superectifier SMD DO-213AB (MELF) 50 to 1600 1.1 / 1.2 1.0 1.0 GP10A to GP10Y Superectifier Axial DO-204AL (DO-41) 50 to 1600 1.1 / 1.2 / 1.3 1.0 1.0 GP10AE to GP10YE Superectifier Axial DO-204AL (DO-41) 50 to 1000 1.1 / 1.2 / 1.3 1.0 1.0 GPP10A to GPP10M Plastic Axial(2) DO-204AL (DO-41) 50 to 1000 1.1 1.0 1.0 M100A to M100M Plastic Axial DO-204AL (DO-41) 50 to 1000 1.0 / 1.1 1.0 1.0 MPG06A to MPG06M Plastic Axial MPG06 50 to 1000 1.1 1.0 1.0 S1A to S1M Plastic SMD(2) DO-214AC (SMA) 50 to 1000 1.1 1.0 1.0 S1PB to S1PM Plastic SMD(2) DO-220AA (SMP) 100 to 1000 1.1 1.0 2.0 SA2B to SA2M Plastic SMD(2) DO-214AC (SMA) 100 to 1000 1.1 2.0 (2) 1.5 1N5391 to 1N5399 Plastic Axial DO-204AC (DO-15) 50 to 1000 1.4 1.5 1.5 1N5391GP to 1N5399GP Superectifier Axial DO-204AC (DO-15) 50 to 1000 1.4 1.5 1.5 BY448GP Superectifier Axial DO-204AC (DO-15) 1650 1.6 3.0 1.5 CGP15 Superectifier Axial DO-204AC (DO-15) 1400 1.1 1.0 1.5 DGP15 Superectifier Axial DO-204AC (DO-15) 1500 1.1 1.0 1.5 GP15A to GP15M Superectifier(R) Axial DO-204AC (DO-15) 50 to 1000 1.1 1.5 1.5 S07D SMF DO-219AB 200 1.1 1.0 1.5 S07G SMF DO-219AB 400 1.1 1.0 Note: 1. Bold text indicates new product "x" designates a number that indicates voltage or is part of a sequence "y" designates reverse voltage, where: A = 50 V, B = 100 V, C = 150 V, D = 200 V, F = 300 V, G = 400 V, H = 500 V, J = 600 V, K = 800 V, M = 1000 V, N = 1100 V, Q = 1200 V, T = 1300 V, V = 1400 V, W = 1500 V, and Y = 1600 V selector guide 2. Glass passivated die 49/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Standard and Fast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Standard Rectifiers, continued IF(AV) (A) Device(1) Package Family Type V(BR) Range (V) Max VF at IF (V) (A) 1.5 S07J SMF DO-219AB 600 1.1 1.0 1.5 S07M SMF DO-219AB 1000 1.1 1.0 2.0 SB2D to SB2M Plastic SMD(2) DO-214AA (SMB) 200 to 1000 1.15 2.0 2.5 BY228GP Superectifier(R) Axial DO-201AD 1500 1.6 2.5 3.0 1N5400 to 1N5408 Plastic Axial DO-201AD 50 to 1000 1.2 3.0 3.0 1N5624GP to 1N5627GP Superectifier Axial DO-201AD 200 to 800 1.0 3.0 3.0 BY251GP to BY255GP Superectifier Axial DO-201AD 200 to 1300 1.1 3.0 3.0 BY251P to BY255P Plastic Axial DO-201AD 200 to 1300 1.1 3.0 3.0 CGP30 Superectifier Axial DO-201AD 1400 1.2 3.0 3.0 DGP30 Superectifier Axial DO-201AD 1500 1.2 3.0 3.0 GP30A to GP30M Superectifier Axial DO-201AD 50 to 1000 1.1 / 1.2 3.0 3.0 GI500 to GI510 Plastic Axial DO-201AD 50 to 1000 1.1 9.4 3.0 P300A to P300M Plastic Axial DO-201AD 50 to 1000 1.2 3.0 3.0 S3A to S3M Plastic SMD DO-214AB (SMC) 50 to 1000 1.15 2.5 4.0 S4PB to S4PM Plastic SMD(2) TO-277A (SMPC) 100 to 1000 1.10 4.0 (2) (2) 5.0 S5A to S5M Plastic SMD DO-214AB (SMC) 50 to 1000 1.15 5.0 5.0 S5MS Plastic SMD(2) DO-214AB (SMC) 1000 1.15 5.0 5.0 S5PMS Plastic SMD TO-277A (SMPC) 1000 1.15 5.0 6.0 GI750 to GI758 Plastic Axial P600 50 to 800 0.90 / 0.95 6.0 6.0 GPP60A to GPP60G Plastic Axial(2) P600 50 to 400 1.1 6.0 6.0 P600A to P600M Plastic Axial P600 50 to 1000 0.9 / 1.0 6.0 8.0 NS8AT to NS8MT Plastic Power Pack(2) TO-220AC 50 to 1000 1.1 8.0 8.0 NSB8AT to NSB8MT Power Pack SMD(2) TO-263AB (D2PAK) 50 to 1000 1.1 8.0 8.0 NSF8AT to NSF8MT Isolated Power Pack ITO-220AC 50 to 1000 1.1 8.0 (2) (2) Note: 1. Bold text indicates new product "x" designates a number that indicates voltage or is part of a sequence "y" designates reverse voltage, where: A = 50 V, B = 100 V, C = 150 V, D = 200 V, F = 300 V, G = 400 V, H = 500 V, J = 600 V, K = 800 V, M = 1000 V, N = 1100 V, Q = 1200 V, T = 1300 V, V = 1400 V, W = 1500 V, and Y = 1600 V selector guide 2. Glass passivated die 50/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers I INNOVAT AND TEC O L OGY Standard and Fast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Standard Avalanche Rated Sinterglass Diodes Part Number VR VRRM VRWM (V) IFAV (A) IFSM at tp = 10 ms (A) VF 25 C (V) At IF (A) IR at Tj 25 C (A) IR High Temp. (A) At Tj (C) 1N5059 200 2.0 50 1.0 1.0 1 100 150 - 55 175 4 20 1.0 18 1N5060 400 2.0 50 1.0 1.0 1 100 150 - 55 175 4 20 1.0 18 1N5061 600 2.0 50 1.0 1.0 1 100 150 - 55 175 4 20 1.0 18 Tj, TSTG Tj, TSTG t Max. ER Min. Max. rr (ns) (mJ) (C) (C) At IR CD at (A) VR = 4 V 1N5062 800 2.0 50 1.0 1.0 1 100 150 - 55 175 4 20 1.0 18 BY448 1500 2.0 30 1.6 3.0 3 140 140 - 55 175(1) 2 10 0.4 - BY458 1200 2.0 30 1.6 3.0 3 140 140 - 55 175 2 10 0.4 - BY527 800 2.0 50 1.0 1.0 1 10 100 - 55 175 4 20 1.0 - (1) BYT51A 50 1.5 50 1.1 1.0 1 100 150 - 55 175 4 20 1.0 - BYT51B 100 1.5 50 1.1 1.0 1 100 150 - 55 175 4 20 1.0 - BYT51D 200 1.5 50 1.1 1.0 1 100 150 - 55 175 4 20 1.0 - BYT51G 400 1.5 50 1.1 1.0 1 100 150 - 55 175 4 20 1.0 - BYT51J 600 1.5 50 1.1 1.0 1 100 150 - 55 175 4 20 1.0 - BYT51K 800 1.5 50 1.1 1.0 1 100 150 - 55 175 4 20 1.0 - BYT51M 1000 1.5 50 1.1 1.0 1 100 150 - 55 175 4 20 1.0 - BYT62 2400 0.35 10 3.0 0.2 5 250 175 - 55 190(2) 5 60 1.0 - BY228 1500 3.0 50 1.5 5.0 5 140 140 - 55 175(1) 2 10 0.4 - BY228-13 1000 3.0 50 1.5 5.0 5 140 140 - 55 (1) 175 2 10 0.4 - BY228-15 1200 3.0 50 1.5 5.0 5 140 140 - 55 175(1) 2 10 0.4 - BYW52 200 2.0 50 1.0 1.0 1 10 100 - 55 175 4 20 1.0 - BYW53 400 2.0 50 1.0 1.0 1 10 100 - 55 175 4 20 1.0 - BYW54 600 2.0 50 1.0 1.0 1 10 100 - 55 175 4 20 1.0 - BYW55 800 2.0 50 1.0 1.0 1 10 100 - 55 175 4 20 1.0 - BYW56 1000 2.0 50 1.0 1.0 1 10 100 - 55 175 4 20 1.0 - BYW82 200 3.0 100 1.0 3.0 1 10 100 - 55 175 4 20 1.0 - BYW83 400 3.0 100 1.0 3.0 1 10 100 - 55 175 4 20 1.0 - BYW84 600 3.0 100 1.0 3.0 1 10 100 - 55 175 4 20 1.0 - BYW85 800 3.0 100 1.0 3.0 1 10 100 - 55 175 4 20 1.0 - BYW86 1000 3.0 100 1.0 3.0 1 10 100 - 55 175 4 20 1.0 - BYX82 200 2.0 50 1.0 1.0 1 25 100 - 55 175 4 - - - BYX83 400 2.0 50 1.0 1.0 1 25 100 - 55 175 4 - - - BYX84 600 2.0 50 1.0 1.0 1 25 100 - 55 175 4 - - - BYX85 800 2.0 50 1.0 1.0 1 25 100 - 55 175 4 - - - BYX86 1000 2.0 50 1.0 1.0 1 25 100 - 55 175 4 - - - S330D 1000 2.0 50 1.65 10.0 5 50 100 - 55 175 4 20 1.0 - Note: ER = pulse energy in avalanche mode 1. Tj = 140 C 2. Tj = 175 C selector guide 51/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Standard and Fast Recover y Rectifiers N HN Rectifiers O 19 62-2012 High-Voltage Standard Recovery Diodes - Plastics IF(AV) (A) Device(3)(5) Source(4) 8.0 VS-8EWS02SxPBF and VS-8EWS12SxPBF 8.0 Package Max VF at IF (V) (A) Family Type V(BR) Range (V) I Power Plastic SMD(2) TO-252 (DPAK) 800 - 1200 1.10 8.0 VS-8EWS02Sx-M3 and VS-8EWS12Sx-M3(6) I Power Plastic SMD(2) TO-252 (DPAK) 800 - 1200 1.10 8.0 8.0 VS-8EWS16SxPBF I Power Plastic SMD(2) TO-252 (DPAK) 1600 1.10 8.0 8.0 VS-8EWS16Sx-M3(6) I Power Plastic SMD(2) TO-252 (DPAK) 1600 1.10 8.0 10.0 VS-10ETS08PBF and VS-10ETS12PBF I Power Plastic Through Hole(2) TO-220AC 800 - 1200 1.10 10.0 10.0 VS-10ETS08-M3 and VS-10ETS12-M3(6) I Power Plastic Through Hole(2) TO-220AC 800 - 1200 1.10 10.0 10.0 VS-10ETS08FPPBF and VS-10ETS12FPPBF I Power Plastic Through Hole(2) TO-220AC FULL-PAK 800 - 1200 1.10 10.0 10.0 VS-10ETS08FP-M3 and VS-10ETS12FP-M3(6) I Power Plastic Through Hole(2) TO-220AC FULL-PAK 800 - 1200 1.10 10.0 10.0 VS-10ETS08SxPBF(6) to VS-10ETS12SxPBF(6) I Power Plastic SMD(2)(6) TO-263AB (D2PAK) 800 - 1200 1.10 10 20.0 VS-20ETS08PBF and VS-20ETS12PBF I Power Plastic Through Hole(2) TO-220AC 800 - 1200 1.10 20.0 20.0 VS-20ETS08-M3 and VS-20ETS12-M3(6) I Power Plastic Through Hole(2) TO-220AC 800 - 1200 1.10 20.0 20.0 VS-20ETS16PBF I Power Plastic Through Hole(2) TO-220AC 1600 1.10 20.0 20.0 VS-20ETS16-M3 I Power Plastic Through Hole TO-220AC 1600 1.10 20.0 20.0 VS-20ATS08PBF and VS-20ATS12PBF I Power Plastic Through Hole(2) TO-220AB 800 - 1200 1.10 20.0 20.0 VS-20ATS08-M3 and VS-20ATS12-M3(6) I Power Plastic Through Hole(2) TO-220AB 800 - 1200 1.10 20.0 20.0 VS-20ETS08FPPBF and VS-20ETS12FPPBF I Power Plastic Through Hole(2) TO-220AC FULL-PAK 800 - 1200 1.10 20.0 20.0 VS-20ETS08FP-M3 and VS-20ETS12FP-M3(6) I Power Plastic Through Hole(2) TO-220AC FULL-PAK 800 - 1200 1.10 20.0 20.0 VS-20ETS08SxPBF(6) to VS-20ETS12SxPBF(6) I Power Plastic SMD(2)(6) TO-263AB (D2PAK) 800 - 1200 1.10 20 25.0 VS-25ETS08SxPBF(6) to VS-25ETS12SxPBF(6) I Power Plastic SMD(2)(6) TO-263AB (D2PAK) 800 - 1200 1.14 25 40.0 VS-40EPS08PBF and VS-40EPS12PBF I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 800 - 1200 1.10 40.0 40.0 VS-40EPS08-M3 and VS-40EPS12-M3(6) I 800 - 1200 1.10 40.0 40.0 VS-40EPS16PBF I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 1600 1.14 40.0 40.0 VS-40EPS16-M3 I Power Plastic Through Hole TO-247AC modified (2 pins) 1600 1.14 40.0 60.0 VS-60EPS08PBF and VS-60EPS12PBF I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 800 - 1200 1.09 60.0 (6) (6) Note: 1. Dual center-tapped device (VF limit at IF is per diode) 2. Single die device 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (2) Power Plastic Through Hole(2) TO-247AC modified (2 pins) (2) 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free 52/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Standard and Fast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers High-Voltage Standard Recovery Diodes - Plastics, continued Package IF(AV) (A) Device(3)(5) Source(4) 60.0 VS-60EPS08-M3 and VS-60EPS12-M3(6) I 60.0 VS-60EPS16PBF I Power Plastic Through Hole(2) Family Type Power Plastic Through Hole(2) TO-247AC modified (2 pins) TO-247AC modified (2 pins) V(BR) Range (V) Max VF at IF (V) (A) 800 - 1200 1.09 60.0 1600 1.07 60.0 60.0 VS-60EPS16-M3 I Power Plastic Through Hole TO-247AC modified (2 pins) 1600 1.07 60.0 80.0 VS-80APS08PBF and VS-80APS12PBF I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 800 - 1200 1.17 80.0 80.0 VS-80APS08-M3 and VS-80APS12-M3(6) I 800 - 1200 1.17 80.0 80.0 VS-80APS16PBF I 80.0 VS-80APS16-M3(6) I (6) Note: 1. Dual center-tapped device (VF limit at IF is per diode) 2. Single die device 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide (2) Power Plastic Through Hole(2) TO-247AC modified (2 pins) Power Plastic Through Hole(2) TO-247AC modified (2 pins) Power Plastic Through Hole(2) TO-247AC modified (2 pins) 1600 1.17 80.0 1600 1.17 80.0 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free 53/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . INNOVAT O L OGY Standard and Fast Recover y Rectifiers Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I Rectifiers N HN O 19 62-2012 ESD Capability Rectifiers (Standard) Package Max VF at IF IF(AV) (A) Device(1)(3) Family 0.7 SE07PB to SE07PJ Plastic SMD(2) 1.0 SE10PB to SE10PJ Plastic SMD DO-220AA (SMP) 100 to 600 1.05 1.0 1.0 MSE1PB to MSE1PJ Plastic SMD(2) MicroSMP 100 to 600 1.10 1.0 1.5 SE15PB to SE15PJ Plastic SMD(2) DO-220AA (SMP) 100 to 600 1.05 1.5 Note: 1. Bold text indicates new product Reverse voltage, where: A = 50 V, B = 100 V, C = 150 V, D = 200 V, F = 300 V, G = 400 V, H = 500 V, J = 600 V 2. Oxide planar die selector guide (2) Type V(BR) Range (V) (V) (A) DO-220AA (SMP) 100 to 600 1.05 0.7 3. Accordance with IEC61000-4-2, Human body model (contact mode): > 8 kV, Human body model (air-discharge mode): >15 kV 54/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Standard and Fast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Fast Recovery Rectifiers are used for applications requiring reverse recovery times in the range of 100 ns to 750 ns. Typical uses are low-frequency SMPS, motor controllers, and electronic ballasts. These products are offered in axial, surface-mount, and power packages. IF(AV) (A) Device(1) 0.5 GHR16 Package Max VF at IF Family Type V(BR) Range (V) (V) (A) Trr (ns) Plastic Axial R-1 (Pho-flash diode) 1600 1.5 0.5 300 DO-213AA (MiniMELF) 50 to 600 1.3 0.5 150 to 250 0.5 RGL34A to RGL34K Superectifier(R) SMD 0.5 RGP02-12E to RGP02-20E Superectifier Axial DO-204AL (DO-41) 1200 to 2000 1.8 0.1 300 1.0 1N4933 to 1N4937 Plastic Axial DO-204AL (DO-41) 50 to 600 1.2 1.0 200 1.0 1N4933GP to 1N4937GP Superectifier Axial DO-204AL (DO-41) 50 to 600 1.2 1.0 200 1.0 1N4942GP to 1N4948GP Superectifier Axial DO-204AL (DO-41) 200 to 1000 1.3 1.0 150 to 500 1.0 1N5615GP to 1N5623GP Superectifier Axial DO-204AC (DO-15) 200 to 1000 1.2 1.0 150 to 500 1.0 BA157 to BA159 Plastic Axial DO-204AL (DO-41) 400 to 1000 1.3 1.0 150 to 500 1.0 BA157GP to BA159GP Superectifier Axial DO-204AL (DO-41) 400 to 1000 1.3 1.0 150 to 500 1.0 BYM11-50 to BYM11-1000 Superectifier SMD DO-213AB (MELF) 50 to 1000 1.3 1.0 150 to 500 1.0 GI810 to GI818 Superectifier Axial DO-204AC (DO-15) 50 to 1000 1.2 1.0 750 1.0 RGF1A to RGF1M Superectifier SMD DO-214BA (GF1) 50 to 1000 1.3 1.0 150 to 500 1.0 RGL41A to RGL41M Superectifier SMD DO-213AB (MELF) 50 to 1000 1.3 1.0 150 to 500 1.0 RGP10A to RGP10M Superectifier Axial DO-204AL (DO-41) 50 to 1000 1.3 1.0 150 to 500 1.0 RGP10AE to RGP10ME Superectifier Axial DO-204AL (DO-41) 50 to 1000 1.3 1.0 150 to 500 1.0 RMPG06A to RMPG06K Plastic Axial(2) MPG06 50 to 800 1.3 1.0 150 to 250 1.0 1.0 RS1A to RS1K (2) Plastic SMD DO-214AC (SMA) 50 to 800 1.3 1.0 150 to 500 RS1PB to RS1PJ Plastic SMD(2) DO-220AA (SMP) 100 to 600 1.3 1.0 150 to 250 1.0 SRP100A to SRP100K Plastic Axial DO-204AL (DO-41) 50 to 800 1.3 1.0 100 to 200 1.4 RS07B SMF DO-219AB 100 1.15 0.7 150 1.4 RS07D SMF DO-219AB 200 1.15 0.7 150 1.4 RS07G SMF DO-219AB 400 1.15 0.7 150 1.4 RS07J SMF DO-219AB 600 1.15 0.7 250 1.4 RS07K SMF DO-219AB 800 1.3 1.0 300 1.5 BYG21K and BYG21M Plastic SMD(2) DO-214AC (SMA) 800 to 1000 1.5 / 1.6 1.0 / 1.5 120 1.5 BYG24D to BYG24J Plastic SMD DO-214AC (SMA) 200 to 600 1.15 / 1.25 1.0 / 1.5 140 1.5 RGP15A to RGP15M Superectifier Axial DO-204AC (DO-15) 50 to 1000 1.3 1.5 150 to 500 1.5 RS2A to RS2K Plastic SMD(2) DO-214AA (SMB) 50 to 800 1.3 1.5 150 to 500 2.0 BY296P to BY299P Plastic Axial DO-201AD 100 to 800 1.3 3.0 500 2.5 RGP25A to RGP25M Superectifier Axial DO-201AD 50 to 1000 1.3 2.5 150 to 500 3.0 BY396P to BY399P Plastic Axial DO-201AD 100 to 800 1.25 3.0 500 (2) 3.0 GI850 to GI856 Plastic Axial DO-201AD 50 to 600 1.25 3.0 200 3.0 GI910 to GI917 Plastic Axial DO-201AD 50 to 800 1.25 3.0 750 3.0 RGP30A to RGP30M Superectifier Axial DO-201AD 50 to 1000 1.3 3.0 150 to 500 (R) Note: 1. Bold text indicates new product 2. Glass passivated die selector guide 55/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Standard and Fast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Fast Recovery Rectifiers, continued IF(AV) (A) Device(1) 3.0 Package V(BR) Range (V) Max VF at IF (V) (A) Trr (ns) Family Type RS3A to RS3K Plastic SMD(2) DO-214AB (SMC) 50 to 800 1.3 2.5 150 to 500 3.0 SRP300A to SRP300K Plastic Axial DO-201AD 50 to 800 1.3 3.0 100 to 200 5.0 BY500-100 to BY500-800 Plastic Axial DO-201AD 100 to 800 1.35 5.0 200 5.0 GI820 to GI828 Plastic Axial P600 50 to 800 1.1 5.0 200 6.0 SRP600A to SRP600K Plastic Axial P600 50 to 800 1.3 6.0 100 to 200 8.0 BY229-200 to BY229-800 Plastic Power Pack(2) TO-220AC 200 to 800 1.85 20.0 145 8.0 BY229X-200 to BY229X-800 Isolated Power Pack ITO-220AC 200 to 800 1.85 20.0 145 8.0 BY229B-200 to BY229B-800 Power Pack SMD(2) TO-263AB (D2PAK) 200 to 800 1.85 20.0 145 (2) Note: 1. Bold text indicates new product 2. Glass passivated die selector guide 56/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Standard and Fast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Fast Soft Recovery Rectifiers Package IF(AV) (A) Device(3)(5) 8.0 VS-8EWF02SxPBF to VS-8EWS06SxPBF 8.0 Source(4) Typ trr at Typ Qrr at V(BR) Max VF at IF see setup see setup Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) Family Type I Power Plastic SMD(2) TO-252 (DPAK) 200 600 1.2 8 140 8 A, 25 A/us 0.25 VS-8EWF02Sx-M3 to VS-8EWS06Sx-M3(6) I Power Plastic SMD(2) TO-252 (DPAK) 200 600 1.2 8 140 8 A, 25 A/us 0.25 8.0 VS-8EWF10SxPBF and VS-8EWS12SxPBF I Power Plastic SMD(2) TO-252 (DPAK) 1000 1.3 1200 8 270 8 A, 25 A/us 1 8.0 VS-8EWF10Sx-M3 and VS-8EWS12Sx-M3(6) I Power Plastic SMD(2) TO-252 (DPAK) 1000 1.3 1200 8 270 8 A, 25 A/us 1 10.0 VS-10ETF02PBF to VS-10ETF06PBF I Power Plastic Through Hole(2) TO-220AC 200 600 1.2 10 145 10 A, 25 A/us 0.32 10.0 VS-10ETF02-M3(6) to VS-10ETF06-M3(6) I Power Plastic Through Hole(2) TO-220AC 200 600 1.2 10 145 10 A, 25 A/us 0.32 10.0 VS-10ETF10PBF and VS-10ETF12PBF I Power Plastic Through Hole(2) TO-220AC 1000 1.33 1200 10 310 10A , 25 A/us 1.05 10.0 VS-10ETF10-M3(6) and VS-10ETF12-M3(6) I Power Plastic Through Hole(2) TO-220AC 1000 1.33 1200 10 310 10 A, 25 A/us 1.05 10.0 VS-10ETF02FPPBF to VS-10ETF06FPPBF I Power Plastic Through Hole(2) TO-220AC FULL-PAK 200 600 1.2 10 145 10 A, 25 A/us 0.32 10.0 VS-10ETF02FP-M3(6) to VS-10ETF06FP-M3(6) I Power Plastic Through Hole(2) TO-220AC FULL-PAK 200 600 1.2 10 145 10 A, 25A /us 0.32 10.0 VS-10ETF10FPPBF and VS-10ETF12FPPBF I Power Plastic Through Hole(2) TO-220AC FULL-PAK 1000 1.33 1200 10 310 10 A, 25 A/us 1.05 10.0 VS-10ETF10FPPBF(6) and VS-10ETF12FPPBF(6) I Power Plastic Through Hole(2) TO-220AC FULL-PAK 1000 1.33 1200 10 310 10 A, 25 A/us 1.05 10.0 VS-10ETF02SxPBF(6) to VS-10ETF06SxPBF(6) I Power Plastic SMD(2)(6) TO-263AB (D2PAK) 200 600 1.2 10 145 10 A, 25 A/us 0.32 10.0 VS-10ETF10SxPBF(6) and VS-10ETF12SxPBF(6) I Power Plastic SMD(2)(6) TO-263AB (D2PAK) 1000 1.33 1200 10 310 10 A, 25 A/us 1.05 20.0 VS-20ETF02PBF to VS-20ETF06PBF I Power Plastic Through Hole(2) TO-220AC 200 600 1.3 20 160 20 A, 100 A/us 1.25 20.0 VS-20ETF02-M3(6) to VS-20ETF06-M3(6) I Power Plastic Through Hole(2) TO-220AC 200 600 1.3 20 160 20 A, 100 A/us 1.25 20.0 VS-20ETF08PBF to VS-20ETF12PBF I Power Plastic Through Hole(2) TO-220AC 800 1.31 1200 20 400 20 A, 25 A/us 1.7 20.0 VS-20ETF08-M3(6) to VS-20ETF12-M3(6) I Power Plastic Through Hole(2) TO-220AC 800 1.31 1200 20 400 20 A, 25 A/us 1.7 Note: 1. Dual center-tapped device (VF limit at IF is per diode) 2. Single die device 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free 57/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Standard and Fast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Fast Soft Recovery Rectifiers, continued IF(AV) (A) Package Device (3)(5) Source (4) Family Type Typ trr at Typ Qrr at V(BR) Max VF at IF see setup see setup Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) 20.0 VS-20ETF02FPPBF to VS-20ETF06FPPBF I Power Plastic Through Hole(2) TO-220AC FULL-PAK 200 600 1.3 20 160 20 A, 100 A/us 1.25 20.0 VS-20ETF02FP-M3(6) to VS-20ETF06FP-M3(6) I Power Plastic Through Hole(2) TO-220AC FULL-PAK 200 600 1.3 20 160 20 A, 100 A/us 1.25 20.0 VS-20ETF10FPPBF and VS-20ETF12FPPBF I Power Plastic Through Hole(2) TO-220AC FULL-PAK 1000 1.31 1200 20 400 20 A, 25 A/us 1.7 20.0 VS-20ETF10FP-M3(6) and VS-20ETF12FP-M3(6) I Power Plastic Through Hole(2) TO-220AC FULL-PAK 1000 1.31 1200 20 400 20 A, 25 A/us 1.7 20.0 VS-20ETF02SxPBF(6) to VS-20ETF06SxPBF(6) I Power Plastic SMD(2)(6) TO-263AB (D2PAK) 200 600 1.3 20 160 20 A, 100 A/us 1.25 20.0 VS-20ETF08SxPBF(6) to 20ETF12SxPBF(6) I Power Plastic SMD(2)(6) TO-263AB (D2PAK) 800 1.31 1200 20 400 20 A, 25 A/us 1.7 30.0 VS-30APF02PBF to VS-30APF06PBF I Power Plastic Through Hole(2) TO-247AC 200 1.41 600 30 160 20 A, 100 A/us 1.25 30.0 VS-30APF02-M3(6) to VS-30APF06-M3(6) I Power Plastic Through Hole(2) TO-247AC 200 1.41 600 30 160 20 A, 100 A/us 1.25 30.0 VS-30EPF02PBF to VS-30EPF06PBF I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 200 1.41 600 30 160 20 A, 100 A/us 1.25 30.0 VS-30EPF02-M3(6) to VS-30EPF06-M3(6) I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 200 1.41 600 30 160 20 A, 100 A/us 1.25 30.0 VS-30APF10PBF and VS-30APF12PBF I Power Plastic Through Hole(2) TO-247AC 1000 1.41 1200 30 450 30 A, 25 A/us 2.16 30.0 VS-30APF10-M3(6) and VS-30APF12-M3(6) I Power Plastic Through Hole(2) TO-247AC 1000 1.41 1200 30 450 30 A, 25 A/us 2.16 30.0 VS-30EPF10PBF and VS-30EPF12PBF I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 1000 1.41 1200 30 450 30 A, 25 A/us 2.16 30.0 VS-30EPF10-M3(6) and VS-30EPF12-M3(6) I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 1000 1.41 1200 30 450 30 A, 25 A/us 2.16 40.0 VS-40EPF02PBF to VS-40EPF06PBF I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 200 1.25 600 40 180 40 A, 25 A/us 0.5 40.0 VS-40EPF02-M3(6) to VS-40EPF06-M3(6) I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 200 1.25 600 40 180 40 A, 25 A/us 0.5 Note: 1. Dual center-tapped device (VF limit at IF is per diode) 2. Single die device 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free 58/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Standard and Fast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Fast Soft Recovery Rectifiers, continued IF(AV) (A) Package Device (3)(5) Source (4) Family Type Typ trr at Typ Qrr at V(BR) Max VF at IF see setup see setup Range setup (V) (V) (A) (ns) (nC) (IF, diF/dt, VR) 40.0 VS-40EPF10PBF and VS-40EPF12PBF I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 1000 1.4 1200 40 450 10 A, 25 A/us 1.8 40.0 VS-40EPF10-M3(6) and VS-40EPF12-M3(6) I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 1000 1.4 1200 40 450 10 A, 25 A/us 1.8 60.0 VS-60APF02PBF to VS-60CPF06PBF I Power Plastic Through Hole(2) TO-247AC 200 600 1.3 60 180 60 A, 25A /us 0.5 60.0 VS-60APF02-M3(6) to VS-60CPF06-M3(6) I Power Plastic Through Hole(2) TO-247AC 200 600 1.3 60 180 60 A, 25 A/us 0.5 60.0 VS-60EPF02PBF to VS-60EPF06PBF I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 200 600 1.3 60 180 60 A, 25 A/us 0.5 60.0 VS-60EPF02-M3(6) to VS-60EPF06-M3(6) I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 200 600 1.3 60 180 60 A, 25 A/us 0.5 60.0 VS-60APF10PBF and VS-60APF12PBF I Power Plastic Through Hole(2) TO-247AC 1000 1.4 1200 60 480 60 A, 25 A/us 2.7 60.0 VS-60APF10-M3(6) and VS-60APF12-M3(6) I Power Plastic Through Hole(2) TO-247AC 1000 1.4 1200 60 480 60 A, 25 A/us 2.7 60.0 VS-60EPF10PBF and VS-60EPF12PBF I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 1000 1.4 1200 60 480 60 A, 25 A/us 2.7 60.0 VS-60EPF10-M3(6) and VS-60EPF12-M3(6) I Power Plastic Through Hole(2) TO-247AC modified (2 pins) 1000 1.4 1200 60 480 60 A, 25 A/us 2.7 80.0 VS-80APF02PBF to VS-80EPF06PBF I Power Plastic Through Hole(2) TO-247AC 200 1.25 600 80 190 40 A, 25 A/us 0.5 80.0 VS-80APF02-M3(6) to VS-80EPF06-M3(6) I Power Plastic Through Hole(2) TO-247AC 200 1.25 600 80 190 40 A, 25 A/us 0.5 80.0 VS-80APF10PBF and VS-80EPF12PBF I Power Plastic Through Hole(2) TO-247AC 1000 1.35 1200 80 480 80 A, 25 A/us 2.1 80.0 VS-80APF10-M3(6) and VS-80EPF12-M3(6) I Power Plastic Through Hole(2) TO-247AC 1000 1.35 1200 80 480 80 A, 25 A/us 2.1 85.0 VS-85EPF12 POWERTABTM 1200 1.36 85 480 85 A, 25 A/us 2.1 Power Plastic Through Hole(2) Note: 1. Dual center-tapped device (VF limit at IF is per diode) 2. Single die device 3. x designates tube or tape&reel version on SMD products none = tube TR = tape and reel centered (for DPAK only) TRL = tape and reel left oriented TRR = tape and reel right oriented selector guide 4. Source: I = formerly International Rectifier Diode unit 5. Bold text indicates new product 6. Halogen free 59/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers I INNOVAT O L OGY Standard and Fast Recover y Rectifiers AND TEC N HN Rectifiers O 19 62-2012 Fast Avalanche Rated Sinterglass Diodes Part Number VR VRRM VRWM (V) IFAV (A) IFSM at tp = 10 ms (A) VF 25 C (V) At IF (A) IR at Tj 25 C (A) IR High Temp. (A) At Tj (C) BY203-12S 1200 0.25 20 2.4 0.2 2 - - - 55 175(1) BY203-16S 1600 0.25 20 2.4 0.2 2 - - - 55 175 (1) BY203-20S 2000 0.25 20 2.4 0.2 2 - - - 55 175(1) BY268 1400 0.8 20 1.25 0.4 2 15 100 - 55 BY269 1600 0.8 20 1.25 0.4 2 15 100 - 55 Tj, TSTG Tj, TSTG t Max. Min. Max. rr (ns) (C) (C) ER (mJ) At IR (A) 300 10 0.4 300 10 0.4 300 10 0.4 175 400 10 0.4 175 400 10 0.4 BYT52A 50 1.4 50 1.3 1.0 5 150 150 - 55 175 200 10 0.4 BYT52B 100 1.4 50 1.3 1.0 5 150 150 - 55 175 200 10 0.4 BYT52D 200 1.4 50 1.3 1.0 5 150 150 - 55 175 200 10 0.4 BYT52G 400 1.4 50 1.3 1.0 5 150 150 - 55 175 200 10 0.4 BYT52J 600 1.4 50 1.3 1.0 5 150 150 - 55 175 200 10 0.4 BYT52K 800 1.4 50 1.3 1.0 5 150 150 - 55 175 200 10 0.4 BYT52M 1000 1.4 50 1.3 1.0 5 150 150 - 55 175 200 10 0.4 BYT54A 50 1.25 30 1.5 1.0 5 150 150 - 55 175 100 10 0.4 BYT54B 100 1.25 30 1.5 1.0 5 150 150 - 55 175 100 10 0.4 BYT54D 200 1.25 30 1.5 1.0 5 150 150 - 55 175 100 10 0.4 BYT54G 400 1.25 30 1.5 1.0 5 150 150 - 55 175 100 10 0.4 BYT54J 600 1.25 30 1.5 1.0 5 150 150 - 55 175 100 10 0.4 BYT54K 800 1.25 30 1.5 1.0 5 150 150 - 55 175 100 10 0.4 BYT54M 1000 1.25 30 1.5 1.0 5 150 150 - 55 175 100 10 0.4 BYV12 100 1.5 40 1.5 1.0 5 150 150 - 55 175 300 10 0.4 BYV13 400 1.5 40 1.5 1.0 5 150 150 - 55 175 300 10 0.4 BYV14 600 1.5 40 1.5 1.0 5 150 150 - 55 175 300 10 0.4 BYV15 800 1.5 40 1.5 1.0 5 150 150 - 55 175 300 10 0.4 BYV16 1000 1.5 40 1.5 1.0 5 150 150 - 55 175 300 10 0.4 BYV37 800 2.0 50 1.1 1.0 5 150 150 - 55 175 300 10 0.4 BYV38 1000 2.0 50 1.1 1.0 5 150 150 - 55 175 300 10 0.4 BYW32 200 2.0 50 1.1 1.0 5 150 150 - 55 175 200 10 0.4 BYW33 300 2.0 50 1.1 1.0 5 150 150 - 55 175 200 10 0.4 BYW34 400 2.0 50 1.1 1.0 5 150 150 - 55 175 200 10 0.4 BYW35 500 2.0 50 1.1 1.0 5 150 150 - 55 175 200 10 0.4 BYW36 600 2.0 50 1.1 1.0 5 150 150 - 55 175 200 10 0.4 1N5417 200 3 100 1.1 3 1 20 100 - 55 175 100 20 1 1N5418 400 3 100 1.1 3 1 20 100 - 55 175 100 20 1 BYW172D 200 3 100 1.1 3 1 20 100 - 55 175 100 20 1 BYW172F 300 3 100 1.1 3 1 20 100 - 55 175 100 20 1 BYW172G 400 3 100 1.1 3 1 20 100 - 55 175 100 20 1 Note: ER = pulse energy in avalanche mode 1. Tj = 150 C selector guide 60/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Standard and Fast Recover y Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Fast Avalanche Rated Sinterglass Diodes, continued Part Number VR VRRM VRWM (V) IFAV (A) IFSM at tp = 10 ms (A) VF 25 C (V) At IF (A) IR at Tj 25 C (A) IR High Temp. (A) At Tj (C) BYM36A 200 3 65 1.6 3 5 100 150 - 55 175 BYM36B 400 3 65 1.6 3 5 100 150 - 55 175 Tj, TSTG Tj, TSTG t Max. Min. Max. rr (ns) (C) (C) ER (mJ) At IR (A) 100 20 1 100 20 1 BYM36C 600 3 65 1.6 3 5 100 150 - 55 175 100 20 1 BYM36D 800 2.9 65 1.78 3 5 100 150 - 55 175 150 20 1 BYM36E 1000 2.9 65 1.78 3 5 100 150 - 55 175 150 20 1 BYT56A 50 3 80 1.4 3 5 150 150 - 55 175 100 10 0.4 BYT56B 100 3 80 1.4 3 5 150 150 - 55 175 100 10 0.4 BYT56D 200 3 80 1.4 3 5 150 150 - 55 175 100 10 0.4 BYT56G 400 3 80 1.4 3 5 150 150 - 55 175 100 10 0.4 BYT56J 600 3 80 1.4 3 5 150 150 - 55 175 100 10 0.4 BYT56K 800 3 80 1.4 3 5 150 150 - 55 175 100 10 0.4 BYT56M 1000 3 80 1.4 3 5 150 150 - 55 175 100 10 0.4 BYT77 800 3 100 1.2 3 5 150 150 - 55 175 250 10 0.4 BYT78 1000 3 100 1.2 3 5 150 150 - 55 175 250 10 0.4 BYW72 200 3 100 1.1 3 5 150 150 - 55 175 200 10 0.4 BYW73 300 3 100 1.1 3 5 150 150 - 55 175 200 10 0.4 BYW74 400 3 100 1.1 3 5 150 150 - 55 175 200 10 0.4 BYW75 500 3 100 1.1 3 5 150 150 - 55 175 200 10 0.4 BYW76 600 3 100 1.1 3 5 150 150 - 55 175 200 10 0.4 Note: ER = pulse energy in avalanche mode 1. Tj = 150 C selector guide 61/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers AND TEC I INNOVAT O L OGY Bridge Rectifiers N HN Rectifiers O 19 62-2012 Bridge Rectifiers are essential for any electronic equipment which requires full wave rectification of an AC power source. The bridge rectifier is comprised of four separate rectifier components configured into a "bridge" arrangement in a single package. Vishay manufactures a complete line of bridge rectifiers including fast recovery, surfacemount, and single in-line types. IF(AV) (A) Device(1) Source(2) 1.2 1KAB10E to 1KAB100E Package Family Type V(BR) Range (V) I Single Phase Rectifier Bridge KAB Max VF at IF (V) (A) 50 - 1000 1.1 1.2 KBB 50 - 1000 1.1 1.9 1.9 2KBB05 to 2KBB100 I Single In-Line Phase Rectifier Bridge 2 2KBP005 to 2KBP10 I Single In-Line Phase Rectifier Bridge KBP 50 - 1000 1.0 1.0 3 KBPC1005 to KBPC110 I Single Phase Rectifier Bridge KBPC 50 - 1000 1.1 1.5 6 KBPC6005 to KBPC610 I Single Phase Rectifier Bridge KBPC 50 - 1000 1.2 3.0 8 KBPC8005 to KBPC810 I Single Phase Rectifier Bridge KBPC 50 - 1000 1.0 3.0 25 GBPC2502A to GBPC2512A I GBPC with fast-on lugs GBPC25A 200 - 1200 1.1 25 25 GBPC2502W to GBPC2512W I GBPC with wire leads GBPC25W 200 - 1200 1.1 25 Single Phase Fully-Controlled Bridge PACE-PAK (D-19) 400 - 1200 1.35 79 25 P131 to P135 I 25 26MB05A to 26MB160A I Single Phase Rectifier Bridge MB (D-34) 50 - 1600 1.25 40 PACE-PAK (D-19) 400 - 1200 1.35 79 25 P121 to P125 I Single Phase Semi-Controlled Bridge Doubler 25 P101 to P105(4)(5) I Single Phase Semi-Controlled Bridge Common Cathode PACE-PAK (D-19) 400 - 1200 1.35 79 25 26MT10 to 26MT160 I Three Phase Bridge MT (D-63) 100 - 1600 1.26 40 35 GBPC3502A to GBPC3512A I GBPC with Fast-On Lugs GBPC35A 200 - 1200 1.1 35 35 GBPC3502W to GBPC3512W I GBPC with Wire Leads GBPC35W 200 - 1200 1.1 35 35 36MB05A to 36MB160A I Single Phase Rectifier Bridge MB (D-34) 50 - 1600 1.3 55 35 36MT10 to 36MT160 I Three Phase Bridge MT (D-63) 100 - 1600 1.19 40 PACE-PAK (D-19) 400 - 1200 1.4 126 40 P431 to P435 I Single Phase Fully-Controlled Bridge 40 P421 to P425 I Single Phase Semi-Controlled Bridge Doubler PACE-PAK (D-19) 400 - 1200 1.4 126 40 P401 to P405(4)(5) I Single Phase Semi-Controlled Bridge Common Cathode PACE-PAK (D-19) 400 - 1200 1.4 126 40 40MT160KPBF I Three Phase Bridge MTK (Screwable) 1600 2.0 100 45 40MT160PBPBF and 40MT160PAPBF I Three Phase Bridge MTP..PA and MTP..PB 1600 1.45 40 50 54MT80KPBF to 54MT160KPBF I Three Phase AC Switch MTK (Screwable) 800 - 1600 2.68 150 55 53MT80KPBF to 53MT160KPBF I Full-Controlled Three Phase Bridge MTK (Screwable) 800 - 1600 2.68 150 55 51MT80KPBF to 51MT160KPBF I Negative Half-Controlled Three Phase Bridge MTK (Screwable) 800 - 1600 2.68 150 Note: 1. Bold text indicates new product 2. Source: I = formerly International Rectifier Diode unit 3. VF limits are per diode 4. Voltage suppressor available (identified by suffix "K") selector guide 5. With both voltage suppression and freewheeling diode available (identified by sufix "KW") 62/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Bridge Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Bridge Rectifiers, continued Type V(BR) Range (V) Max VF at IF Family (V) (A) I Positive Half-Controlled Three Phase Bridge MTK (Screwable) 800 - 1600 2.68 150 60MT80KPBF to 60MT160KPBF I Three Phase Bridge MTK (Screwable) 800 - 1600 1.75 100 70 70MT80KPBF to 70MT160KPBF I Three Phase Bridge MTK (Screwable) 800 - 1600 1.6 100 75 70MT160PBPBF and 70MT160PAPBF I Three Phase Bridge MTP..PA and MTP..PB 1600 1.45 70 75 100MT160PBPBF and 100MT160PAPBF I Three Phase Bridge MTP..PA and MTP..PB 1600 1.51 100 90 93MT80KPBF to 93MT160KPBF I Full-Controlled Three Phase Bridge MTK (Screwable) 800 - 1600 1.65 150 90 113MT80KPBF to 113MT160KPBF I Full-Controlled Three Phase Bridge MTK (Screwable) 800 - 1600 1.57 150 90 91MT80KPBF to 91MT160KPBF I Negative Half-Controlled Three Phase Bridge MTK (Screwable) 800 - 1600 1.65 150 90 111MT80KPBF to 111MT160KPBF I Negative Half-Controlled Three Phase Bridge MTK (Screwable) 800 - 1600 1.57 150 90 92MT80KPBF to 92MT160KPBF I Positive Half-Controlled Three Phase Bridge MTK (Screwable) 800 - 1600 1.65 150 90 112MT80KPBF to 112MT160KPBF I Positive Half-Controlled Three Phase Bridge MTK (Screwable) 800 - 1600 1.57 150 90 94MT80KPBF to 94MT160KPBF I Three Phase AC Switch MTK (Screwable) 800 - 1600 1.55 150 90 90MT80KPBF to 90MT160KPBF I Three Phase Bridge MTK (Screwable) 800 - 1600 1.6 150 IF(AV) (A) Device(1) Source(2) 55 52MT80KPBF to 52MT160KPBF 60 Package 100 104MT80KPBF to 104MT160KPBF I Three Phase AC Switch MTK (Screwable) 800 - 1600 1.53 150 110 110MT80KPBF to 110MT160KPBF I Three Phase Bridge MTK (Screwable) 800 - 1600 1.4 150 130 130MT80KPBF to 130MT160KPBF I Three Phase Bridge MTK (Screwable) 800 - 1600 1.63 200 160 160MT80KPBF to 160MT160KPBF I Three Phase Bridge MTK (Screwable) 800 - 1600 1.49 200 200 200MT40KPBF I Three Phase Bridge MTK (Screwable) 400 1.4 200 Note: 1. Bold text indicates new product 2. Source: I = formerly International Rectifier Diode unit 3. VF limits are per diode 4. Voltage suppressor available (identified by suffix "K") selector guide 5. With both voltage suppression and freewheeling diode available (identified by sufix "KW") 63/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Bridge Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Bridge Rectifiers, continued IF(AV) (A) Device(1) Package Type V(BR) Range (V) (2) Family Max VF at IF(5) (V) (A) 0.5 MB2M, MB4M, and MB6M Mini-Bridge MBM 200 - 600 1.0 0.4 0.5 B2M, B4M, and B6M Mini-Bridge(2) MBM 200 - 600 1.0 0.5 (2) 0.5 MB2S, MB4S, and MB6S Mini-Bridge (SMD) MBS (TO-269AA) 200 - 600 1.0 0.4 0.5 B2S, B4S and B6S Mini-Bridge (SMD)(2) MBS (TO-269AA) 200 - 600 1.0 0.5 0.5 RMB2S and RMB4S Recovery Mini-Bridge (SMD) MBS (TO-269AA) 200 - 400 1.25 0.4 0.9 BxxC800DM Dual In-Line(2) DFM 65 - 600 1.0 0.9 0.9 B40C800G to B380C800G WOG(2) WG 65 - 600 1.0 0.9 1.0 B40C1000G to B380C1000G WOG(2) WG 65 - 600 1.0 1.0 (2) DFM 50 - 1000 1.1 1.0 DFM 50 - 1000 1.1 1.0 (2) (2) 1.0 DF005M to DF10M Dual In-Line 1.0 DF005MA to DF10MA Dual In-Line(2) 1.0 DF005S to DF10S Dual In-Line (SMD) DFS 50 - 1000 1.1 1.0 1.0 DF005SA to DF10SA Dual In-Line (SMD)(2) DFS 50 - 1000 1.1 1.0 1.0 EDF1AM to EDF1DM Ultrafast Dual In-Line DFM 50 - 200 1.05 1.0 1.0 EDF1AS to EDF1DS Ultrafast Dual In-Line (SMD) 1.5 3N246 to 3N252 Single In-Line(2) 1.5 B40C1500G to B380C1500G WOG(2) WG 65 - 600 1.0 1.5 1.5 DF15005S to DF1510S Dual In-Line (SMD)(2) DFS 50 - 1000 1.1 1.5 1.5 DFL15005S to DFL1510S Low-Profile DIL (SMD)(2) L-DFS 50 - 1400 1.1 1.5 1.5 G2SB20, G2SB60, and G2SB80 Single In-Line(2)(4) GBL 200 - 800 1.0 0.75 1.5 G2SBA20, G2SBA60, and G2SBA80 Single In-Line(2)(4) GBL 200 - 800 1.0 0.75 1.5 KBP005M to KBP10M Single In-Line(2) KBPM 50 - 1000 1.0 / 1.3 1.0 / 1.57 1.5 W005G to W10G WOG(2) WG 50 - 1000 1.0 1.0 2.0 2KBP005M to 2KBP10M Single In-Line(2) KBPM 50 - 1000 1.1 3.14 2.0 2W005G to 2W10G WOG(2) WG 50 - 1000 1.1 2.0 2.0 3N253 to 3N259 Single In-Line(2) KBPM 50 - 1000 1.1 3.14 3.0 GBPC1005 to GBPC110 GBPC with Wire Leads(2) GBPC1 50 - 1000 1.0 1.5 3.0 3KBP005M to 3KBP08M Single In-Line(2) KBPM 50 - 800 1.05 3.0 4.0 G3SBA20S, G3SBA60, and G3SBA80 Single In-Line with Mounting Hole(2)(4) GBU 200 - 800 1.0 2.0 4.0 GBL005 to GBL10 Single In-Line(2) GBL 50 - 1000 1.0 4.0 4.0 GBLA005 to GBLA10 Single In-Line GBL 50 - 1000 1.0 4.0 4.0 GBU4A to GBU4M Single In-Line with Mounting Hole(2) GBU 50 - 1000 1.0 4.0 (2)(3) (2)(3) (2) DFS 50 - 200 1.05 1.0 KBPM 50 - 1000 1.0 / 1.3 1.0 / 1.57 4.0 KBL005 to KBL10 Single In-Line KBL 50 - 1000 1.1 4.0 4.0 KBU4A to KBU4M Single In-Line with Mounting Hole KBU 50 - 1000 1.0 4.0 6.0 GBPC6005 to GBPC610 GBPC with Wire Leads(2) GBPC6 50 - 1000 1.0 3.0 6.0 GBU6A to GBU6M Single In-Line with Mounting Hole(2) GBU 50 - 1000 1.0 6.0 6.0 G5SBA20, G5SBA60, and G5SBA80 Single In-Line with Mounting Hole GBU 200 - 800 1.05 3.0 Note: 1. Bold text indicates new product 2. Glass passivated die 3. trr = 50ns max. for EDF1 types selector guide (2)(4) 4. Japanese electrical specifications 5. VF limits are per diode 64/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Bridge Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Bridge Rectifiers, continued IF(AV) (A) Device(1) 6.0 Package Max VF at IF(5) Type V(BR) Range (V) GSIB620 to GSIB680 (2) Single In-Line with Mounting Hole GSIB-5S 200 - 800 0.95 3.0 6.0 GSIB620N, GISB640N, GSIB660N, GSIB680N Single In-Line with Mounting Hole(2) GSIB-5S 200 - 800 0.95 3.0 6.0 GSIB6A20 to GSIB6A80 Single In-Line with Mounting Hole(2) GSIB-5S 200 - 800 1.0 3.0 6.0 GSIB6A20N, GISB6A40N, GSIB6A60N, GSIB6A80N Single In-Line with Mounting Hole(2) GSIB-5S 200 - 800 1.0 3.0 6.0 KBU6A to KBU6M Single In-Line with Mounting Hole KBU 50 - 1000 1.0 6.0 6.0 VSIB620 to VSIB680 (2) Single In-Line with Mounting Hole GSIB-5S 200 - 800 0.95 3.0 6.0 VSIB6A20 to VSIB6A80 Single In-Line with Mounting Hole(2) GSIB-5S 200 - 800 1.0 3.0 8.0 GBU8A to GBU8M Single In-Line with Mounting Hole GBU 50 - 1000 1.0 8.0 8.0 KBU8A to KBU8M Single In-Line with Mounting Hole KBU 50 - 1000 1.0 8.0 10 BU1006 to BU1010 Single In-Line with Mounting Hole(2) BU 600 - 1000 1.05 5.0 10 BU1006A to BU1010A Single In-Line with Mounting Hole(2) BU 600 - 1000 1.1 5.0 10 VSIB10A20 to VSIB10A80 Single In-Line with Mounting Hole GSIB-5S 200 - 800 1.0 5.0 12 BU1206 to BU1210 Single In-Line with Mounting Hole(2) BU 600 - 1000 1.05 6.0 12 GBPC12005 to GBPC1210 GBPC with Fast-On Lugs(2) GBPC12-35 50 - 1000 1.1 6.0 12 GBPC12005W to GBPC1210W GBPC with Wire Leads GBPC12-35W 50 - 1000 1.1 6.0 15 BU1506 to BU1510 Single In-Line with Mounting Hole(2) BU 600 - 1000 1.05 7.5 15 GBPC15005 to GBPC1510 GBPC with Fast-On Lugs(2) GBPC12-35 50 - 1000 1.1 7.5 15 GBPC15005W to GBPC1510W GBPC with Wire Leads(2) GBPC12-35W 50 - 1000 1.1 7.5 15 GSIB1520 to GSIB1580 (2)(4) Single In-Line with Mounting Hole GSIB-5S 200 - 800 0.95 7.5 15 GSIB1520N, GSIB1540N, GSIB1560N, GSIB1580N Single In-Line with Mounting Hole(2)(4) GSIB-5S 200 - 800 0.95 7.5 15 GSIB15A20 to GSIB15A80 Single In-Line with Mounting Hole(2)(4) GSIB-5S 200 - 800 1.05 7.5 15 GSIB15A20N, GSIB15A40N, GSIB15A60N, GSIB15A80N Single In-Line with Mounting Hole(2)(4) GSIB-5S 200 - 800 1.05 7.5 15 VSIB1520 to VSIB1580 Single In-Line with Mounting Hole(2)(4) GSIB-5S 200 - 800 0.95 7.5 15 VSIB15A20 to VSIB15A80 Single In-Line with Mounting Hole GSIB-5S 200 - 800 1.0 7.5 20 BU2006 to BU2010 Single In-Line with Mounting Hole(2) BU 600 - 1000 1.05 10.0 20 GSIB2020 to GSIB2080 Single In-Line with Mounting Hole(2)(4) GSIB-5S 200 - 800 1.1 10.0 20 GSIB2020N, GSIB2040N, GSIB2060N, GSIB2080N Single In-Line with Mounting Hole(2)(4) GSIB-5S 200 - 800 1.1 10 20 VSIB2020 to VSIB2080 Single In-Line with Mounting Hole(2)(4) GSIB-5S 200 - 800 1.0 10.0 25 BU2506 to BU2510 Single In-Line with Mounting Hole(2) BU 600 - 1000 1.05 12.5 25 GBPC25005 to GBPC2510 GBPC with Fast-On Lugs(2) GBPC12-35 50 - 1000 1.1 12.5 25 GBPC25005W to GBPC2510W GBPC with Wire Leads(2) GBPC12-35W 50 - 1000 1.1 12.5 25 GSIB2520 to GSIB2580 GSIB-5S 200 - 800 1.05 12.5 Note: 1. Bold text indicates new product 2. Glass passivated die 3. trr = 50ns max. for EDF1 types selector guide Family (2) (2) (2) (2)(4) Single In-Line with Mounting Hole (2)(4) (V) (A) 4. Japanese electrical specifications 5. VF limits are per diode 65/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . AND TEC I INNOVAT O L OGY Bridge Rectifiers N HN Rectifiers O 19 62-2012 Rectifiers - Worldwide Leader in Power Rectifiers Bridge Rectifiers, continued IF(AV) (A) Device(1) 25 Package Max VF at IF(5) Family Type V(BR) Range (V) GSIB2520N, GSIB2540N, GSIB2560N, GSIB2580N Single In-Line with Mounting Hole(2)(4) GSIB-5S 200 - 800 1.05 12.5 25 VSIB2520 to VSIB2580 Single In-Line with Mounting Hole(2)(4) GSIB-5S 200 - 800 1.0 12.5 30 PB3006 to PB3010 Single In-Line with Mounting Hole PB 600 - 1000 1.10 15.0 35 GBPC35005 to GBPC3510 GBPC with Fast-On Lugs(2) GBPC12-35 50 - 1000 1.1 17.5 35 GBPC35005W to GBPC3510W GBPC with Wire Leads(2) GBPC12-35W 50 - 1000 1.1 17.5 35 PB3506 to PB3510 Single In-Line with Mounting Hole(2) PB 600 - 1000 1.10 17.5 40 PB4006 to PB4010 (2) Single In-Line with Mounting Hole PB 600 - 1000 1.10 20.0 45 PB5006 to PB5010 Single In-Line with Mounting Hole(2) PB 600 - 1000 1.10 22.5 Note: 1. Bold text indicates new product 2. Glass passivated die 3. trr = 50ns max. for EDF1 types selector guide (2) (V) (A) 4. Japanese electrical specifications 5. VF limits are per diode 66/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers SMPC (TO-277A) SMP (DO-220AA) MicroSMP SMF SMA (DO-214AC) D2PAK (TO-263AB) DPAK (TO-252) ITO-220AC IPAK (TO-251) TO-220AB TO-220AC TO-247AC FbPLSA540QNC011-SV edonA 1 TO-247AD TO-220AB I INNOVAT * * * * * * TO-218 TO-220AC 1 3 Anode 2 Anode 2 1 Common cathode * * * * TO-220FPAC Two common-cathode diodes Ultrafast reverse recovery Ultrafast reverse recovery cur Low forward voltage drop Low leakage current Optimized for power conver SMPS applications Up to 175 C operating junctio Compliant to RoHS directive 2 Designed and qualified for ind Halogen-free according to IEC ITO-220AB DESCRIPTION MBS (TO-269AA) DFM DFS The 70CRU04 integrates two s ultrafast recovery rectifiers configuration. The planar struc platinum doping life-time contro current shape, together with th ruggedness and reliability chara thus intended for high frequen switching energy is designed no of the total energy, such as in th welding machines, SMPS, extremely optimized stored cha reduce both over-dissipation in snubbers) and EMI/RFI. 38 ns DFLS GBPCT IF(AV) at TC = 116 C 2 x 35 A VR 400 V KBPM LS-8-16-D ABSOLUTE MAXIMUM RATINGS YRAMMUS TCUDORP )VA(FI GBL V 5S R 3S D-38 CITSIRETCARAHC DNA SGNITAR ROJAM CITSIRETCARAHC PARAMETER SYMBOL 2KBB M D-72 Continuous forward current per diode IF(AV) TC = 116 C Single pulse forward current per diode IFSM TC = 25 C PD TC = 100 C Operating junction and storage temperatures )VA(FI TEST CONDITIONS VR D-44 Cathode to anode voltage Maximum power dissipation per module LOBMYS mrofevaw ralugnatceR TJ, TStg - 55 MRRV enis s 5 = pt MSF I )gel rep( C 521 = JT ,kpA 55 FV egnaR D-34 JT ELECTRICAL SPECIFICATIONS PER DIODE (TJ = 25 C unless otherwise spec D63 MTK MTP PARAMETER PB Breakdown voltage, blocking voltage SYMBOL GBU VBR, VR S GNITA R E GA TLOV RETEMARAP Forward voltage VF egatlov esrever CD mumixaM egatlov esrever kaep gnikrow mumixaM PowerTab(R) WOG KBU KBL Reverse leakage current IR Junction capacitance CT GBPC-W TEST CONDITIONS IR = 100 A BU Document Number: 94510 Revision: 09-Jun-09 32149 :rebmuN tnemucoD 01-rpA-61 :noisiveR - IF = 35 A, TJ = 175 C - VR = VR rated - TJ = 150 C, VR = VR rated - VR = 400 V - GBPC For technical questions, contact: diodes-tech@vishay.com SOD-64 P600 DO-204AC DO-204AL MPG06 67/69 400 IF = 35 A, TJ = 125 C SOD-57 selector guide MIN. IF = 35 A * Pb containing terminations are not RoHS compliant, exemptions may apply tpmexe ,tnailpmoc SHoR ton era snoitanimret gniniatnoc bP * itseuq lacinhcet roF ITO-220AB FEATURES Base common cathode 2 trr D-61 MS-8-16-D V 54 W RV TO-220FPAC PRODUCT SUMMARY A 55 x 2 RV Ultrafast Rectifier, 2 x 35 A FRED PtTM FbPMSA540QNC011-SV esaB nommoc edohtac BMYS SMC (DO-214AB) 8-16-D 2 1 edonA nommoC 1 edohtac 1 SMB (DO-214AA) FbPA540QNC011-SV 2 1 edonA nommoC 1 edohtac 3 onA 2 62-2012 Vishay Hig esaB nommoc edohtac 3 onA 2 19 Rectifier Packages hcS noitareneG weN 3 onA 2 AND TEC O L OGY Featured Product Information N HN Rectifiers O VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . Rectifiers - Worldwide Leader in Power Rectifiers I INNOVAT AND TEC O L OGY Featured Product Information N HN Rectifiers O 19 62-2012 Sample Package Construction Superectifier(R) SINTERGLASS RECTIFIER The glass passivated rectifier is a hermetically sealed, diffused junction rectifier with unsurpassed operating and surge capabilities at high temperatures. An extremely pure, specially developed glass applied in direct contact with the silicon junction, creates an ideal cavity-free passivating medium. Glass rectifiers are offered in standard, fast, and ultrafast types. The Superectifier is exactly that: a super rectifier. This highly-reliable and cost-effective rectifier is the result of a combination of patented technologies. No other 0.25 A to 3.0 A rectifiers of any kind -- plastic, glass, or metal -- can match the Superectifier combination of features that result from Vishay's unique glass-plastic construction. Superectifier products are offered in standard, fast, and ultrafast types for both axial and surface mounting. Moly Slug Solid Brazed Contacts at Temperature > 600 C Solid Brazing, Low Resistance, Excellent Surge Capabilities, Brazed Temperature > 600 C Plated Copper Leads Opaque Cavity-free Passivation Glass (Hermetically Sealed) Silicon Avalanche Mesa Die Completely Encapsulated Brazed Construction Opaque Cavity-free Silicon Die Passivation Glass (Hermetically Sealed) Copper Wires (With Iron Core) Plated Surface Moly Slug UL Recognized Flame-Retardant Molding Compound (UL94V-0) ITO-220AB Vishay offers the TO-220 power package with either the heat sink exposed or with an isolated body, as shown below. Chip Jumper Single Plated Copper Leads UL Recognized Flame-Retardant Molding Compound (UL94V-0) selector guide 68/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n terte c h n o l o g y, I n c . 19 Rectifiers - Worldwide Leader in Power Rectifiers AND TEC O L OGY INNOVAT I N HN Rectifiers O 62-2012 Worldwide Sales Contacts The Americas EUROPE United states Germany Vishay Americas One Greenwich Place Shelton, CT 06484 United States Ph: +1-402-563-6866 Fax: +1-402-563-6296 Vishay Electronic GmbH Dr.-Felix-Zandman-Platz 1 95100 Selb Germany Ph: +49-9287-71-0 Fax: +49-9287-70435 Asia france singapore Vishay intertechnology Asia Pte Ltd. 37A Tampines Street 92 #07-00 Singapore 528886 Ph: +65-6788-6668 Fax: +65-6788-0988 Vishay S.A. 199, bd de la madelEine 06003 nice, cedex 1 France Ph: +33-4-9337-2727 Fax: +33-4-9337-2726 p.r. China united kingdom Vishay China Co., Ltd. 15D, Sun Tong Infoport Plaza 55 Huai Hai West Road Shanghai 200030 P.R. China PH: +86-21-5258 5000 FAX: +86-21-5258 7979 Vishay Ltd. Suite 6C, Tower House St. Catherine's Court Sunderland Enterprise Park Sunderland SR5 3XJ UNITED KINGDOM Ph: +44-191-516-8584 Fax: +44-191-549-9556 japan VISHAY JAPAN CO., LTD. Shibuya Prestige Bldg. 4F 3-12-22, Shibuya Shibuya-ku Tokyo 150-0002 Japan Ph: +81-3-5466-7150 fax: +81-3-5466-7160 selector guide 69/69 VMN-SG2125-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000