Sign In SHOP BLOG LEARN FORUMS 0 Items VIDEOS PROTOTYPING / WIRING / 2-PIN WIRE JOINTS (3-PACK) 2-Pin Wire Joints (3pack) PRODUCT ID: 3786 IN STOCK ADD TO CART 1 1-9 10-99 100+ ADD TO WISHLIST DESCRIPTION DESCRIPTION These are the easiest way possible to connect two wires - no if's, and's, or butt's! Well, actually, these are often referred to as wire butts 'cause you 'butt' two wires together (hey we didn't come up with the name!) Butt seriously folks! OK, so despite the humor, these are really handy. If you want to quickly prototype some wiring, skip the soldering and use these 2-pin Wire Joints! These connectors are super handy when your LED strip project requires interfacing bare wires, or maybe you want to extend some motor wires. Or really anything. Simply open the apertures by pressing on the curved arm, insert the wire into the mounting hole, and release the arm to ensure a snug, firm fit. These wire joints are big enough for a range of wire gauges - we tried 30 thru 16 AWG. Both solid and stranded core will work. Come in a pack of 3, just like most magical things! TECHNICAL DETAILS Diagram MAY WE ALSO SUGGEST... Snap-action 5-Wire Block Connector (12-28 AWG) - Cold Splice Wire Tap (UB) 10 pack Terminal block - 4 pin EuroStyle Terminal Block - 3-pin 3.5mm - pack of 5! Power Distribution Bus - 7 x 6mm diameter solid brass Cold 2-Wire Splice (UY) - 10 pack Snap-action 3-Wire Block Connector (12-28 AWG) - Terminal Block - 2-pin 3.5mm - pack of 5! Terminal Blocks - Various Sizes Pig-Tail Cables - 0.1" 2-pin 4 Pack DISTRIBUTORS CONTACT SUPPORT DISTRIBUTORS EDUCATORS JOBS EXPAND TO SEE DISTRIBUTORS "Premature optimization is the root of all evil" - Donald Knuth FAQ SHIPPING & RETURNS TERMS OF SERVICE PRIVACY & LEGAL ABOUT US ENGINEERED IN NYC Adafruit (R) 4.9