4
PCB Relay G2RL
Next-generation PCB Relay Available in
24 Models
Low profile: 15.7 mm max. in height
Contains
no lead inside and features cadmium-free
contacts ensuring environment-friendly use.
Conforms to VDE0435 (VDE approval: C250
insulation grade for flux protection models; B400
insulation grade for fully sealed models), UL508
and CSA22.2.
Meets VDE0700 requirements for household
products according to VDE0110.
Clearance
and creepage distance: 10 mm/10 mm.
Tracking resistance: CTI>250
(Both standard and class F type)
UL1446 Class F Coil Insulation system available.
High sensitivity: 400 mW
RC
VDE
Ordering Information
Classification Enclosure
ti
Contact form
C ass ca o
c osu e
ratings SPST-NO SPDT DPST-NO DPDT
Standard General-purpose
Flux protection
G2RL-1A G2RL-1 G2RL-2A G2RL-2
S a da d
Ge e a u ose
Fully sealed
G2RL-1A4 G2RL-14 G2RL-2A4 G2RL-24
High-capacity
Flux protection
G2RL-1A-E G2RL-1-E --- ---
gcaacy
Fully sealed
G2RL-1A4-E G2RL-14-E --- ---
Class-F General-purpose
Flux protection
G2RL-1A-CF G2RL-1-CF G2RL-2A-CF G2RL-2-CF
C ass
Ge e a u ose
Fully sealed
G2RL-1A4-CF G2RL-14-CF G2RL-2A4-CF G2RL-24-CF
High-capacity
Flux protection
G2RL-1A-E-CF G2RL-1-E-CF --- ---
gcaacy
Fully sealed
G2RL-1A4-E-CF G2RL-14-E-CF --- ---
Rated coil voltage
Note:
When ordering, add the rated coil voltage to the model number
.
Example: G2RL-1A 12 VDC
Model Number Legend
G2RL-jjj-j-j
123 4 5
1. Number
of Poles
1:
1 pole
2:
2 poles
2. Contact Form
None: jPDT
A: jPST-NO
3.
Enclosure Ratings
None:
Flux protection
4:
Fully sealed
4. Classification
None:
General purpose
E:
High capacity (1 pole)
5.
Approved Standards
None: UL, CSA, VDE, UL Class B Insulation
CF:
UL, CSA, VDE, UL Class F Insulation
G2RL G2RL
5
Specifications
Coil Ratings
Rated
voltage
5 VDC
12 VDC 24 VDC 48 VDC
Rated current
80.0 mA 33.3 mA 16.7 mA 8.96 mA
Coil resistance
62.5
360
1,440
5,358
Must operate voltage
70% max. of the rated voltage
Must release voltage
10% min. of the rated voltage
Max. voltage
130% at 85
°
C of the rated voltage
Power consumption
Approx. 400 mW Approx. 430 mW
Note: The
rated current and coil resistance are measured at a coil temperature of 23
°
C with a tolerance of
±10%.
Contact Ratings
Number
of poles
1 pole
2 poles
Contact material
AgSnO2AgNi
Load
Resistive load (cos
φ=1)
Resistive load (cos
φ=1)
Rated load
12 A (16 A) at 250 V
AC
12 A (16 A) at 24 VDC
(See note 2.)
8 A at 250 V
AC
8 A at 30 VDC
(See note 2.)
Rated carry current
12 A (16 A)
(See note 2.)
8 A (70
°
C)/5 A (85
°C)
(See note 2.)
Max. switching voltage
440 V
AC, 300 VDC
Max. switching current
12 A (16 A) 8 A
Max. switching power
3,000 V
A (4,000 V
A)
2,000 V
A
Note: 1. Values
in parentheses are those for the high-capacity model.
2.
Contact your OMRON representative for the ratings on fully sealed models.
Characteristics
Item 1
pole
2 poles
Contact resistance
100 m
max.
Operate (set) time
15 ms max. (Approx. 7 ms typical)
Release (reset) time
5 ms max. (Approx. 2 ms typical)
Max. operating frequency
Mechanical:
18,000 operation/hr
Electrical:
1,800 operation/hr at rated load
Insulation resistance
1,000 M
min. (at 500 VDC)
Dielectric strength
5,000 V
AC, 1 min between coil and contacts
1,000 V
AC, 1 min between contacts of same polarity
5,000 V
AC, 1 min between coil and contacts
2,500 V
AC, 1 min between contacts of dif
ferent polarity
1,000 V
AC, 1 min between contacts of same polarity
Impulse withstand voltage
10 kV (1.2
50
µ
s) between coil and contact
V
ibration resistance
Destruction:
10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Malfunction:
10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Shock resistance
Destruction:
1,000 m/s
2
Malfunction: Energized:
100 m/s
2
Not energized: 100 m/s
2
Endurance (Mechanical)
20,000,000 operations (at 18,000 operations/hr)
Ambient temperature
Operating: –40°
C to 85
°
C (with no icing)
Storage: –40°
C to 85
°
C (with no icing)
Ambient humidity
5% to 85%
Weight
Approx. 12 g
Packaging
Standard: 20 relays/stick
Note: Values
in the above table are the initial values.
Approved Standards
UL508 (File No. E41643)
Model Contact
form
Coil ratings Contact ratings
G2RL-1A SPST-NO
3 to 48 VDC
12 A at 250 V
AC (General use)
12 A t 24 VDC (R i ti )
G2RL-1 SPDT
3
to
48
VDC
12
A
at
250
V
AC
(General
use)
12 A at 24 VDC (Resistive)
G2RL-1A-E SPST
-NO (High capacity)
16 A at 250 V
AC (General use)
16 A t 24 VDC (R i ti )
G2RL-1-E
SPDT (High capacity)
16
A
at
250
V
AC
(General
use)
16 A at 24 VDC (Resistive)
G2RL-2A DPST-NO
8 A at 277 V
AC (General use)
8A t30VDC(R iti )
G2RL-2 DPDT
8
A
at
277
V
AC
(General
use)
8 A at 30 VDC (Resistive)
G2RL G2RL
6
CSA C22.2 (No. 14) (File No. LR31928)
Model Contact
form
Coil ratings Contact ratings
G2RL-1A SPST-NO
3 to 48 VDC
12 A at 250 V
AC (General use)
12 A t 24 VDC (R i ti )
G2RL-1 SPDT
3
to
48
VDC
12
A
at
250
V
AC
(General
use)
12 A at 24 VDC (Resistive)
G2RL-1A-E SPST
-NO (High capacity)
16 A at 250 V
AC (General use)
16 A t 24 VDC (R i ti )
G2RL-1-E
SPDT (High capacity)
16
A
at
250
V
AC
(General
use)
16 A at 24 VDC (Resistive)
G2RL-2A DPST-NO
8 A at 277 V
AC (General use)
8A t30VDC(R iti )
G2RL-2 DPDT
8
A
at
277
V
AC
(General
use)
8 A at 30 VDC (Resistive)
VDE0435 (Licence No. 119650)
Model Contact
form
Coil ratings Contact ratings
G2RL
1 pole
5, 12, 18, 22, 24, 48 VDC
12 A at 250 V
AC (cosφ=1)
12 A at 24 VDC (L/R=0 ms)
AC15:
3 A at 240 V
AC
DC13: 2.5 A at 24 VDC, 50 ms
1 pole (High capacity)
16 A at 250 V
AC (cosφ=1)
16 A at 24 VDC (L/R=0 ms)
AC15:
3 A at 240 V
AC (NO)
1.5 A at 240 V
AC (NC)
DC13: 2.5 A at 24 VDC (NO), 50 ms
2 poles
8 A at 250 V
AC (cosφ=1)
8 A at 24 VDC (L/R=0 ms)
AC15:
1.5 A at 240 V
AC
DC13: 2 A at 30 VDC, 50 ms
Engineering Data
DC resistive
load
AC resistive load
Maximum Switching Capacity
Switching Current (A)
Switching
voltage (V)
Ambient Temperature
vs Maximum Coil Voltage
Maximum Coil V
oltage (%)
Ambient
T
emperature (
°C)
Ambient Temperature
vs Rated Carry Current
Rated Carry Current (A)
Ambient
T
emperature (
°C)
G2RL-2A, G2RL-2
G2RL-1A-E, G2RL-1-E
G2RL-1A, G2RL-1
G2RL-1A, G2RL-1 G2RL-1A-E, G2RL-1-E G2RL-2A, G2RL-2
Switching
voltage (V)
Switching voltage (V)
Switching Current (A)
Switching Current (A)
Note: The maximum coil voltage refers to
the maximum value in a varying
range of operating power voltage,
not
a continuous voltage.
DC resistive
load
AC resistive load
DC resistive
load
AC resistive load
85
Note: Contact
your OMRON representative for the data on fully sealed models.
G2RL G2RL
7
Electrical Endurance Data
G2RL-1-E 16
A at 250 V
AC (cosφ=1)
30,000 operations min.
16 A at 24 VDC
30,000 operations min.
8 A at 250 V
AC (cosφ=0.4)
200,000 operation min. (Normally open side operation)
8 A at 30 VDC (L/R=7 ms)
10,000 operation min. (Normally open side operation)
G2RL-1
12 A at 250 V
AC (cosφ=1)
50,000 operations min.
12 A at 24 VDC
30,000 operations min.
5 A at 250 V
AC (cosφ=0.4)
150,000 operation min. (Normally open side operation)
5 A at 30 VDC (L/R=7 ms)
20,000 operation min. (Normally open side operation)
G2RL-2
8 A at 250 V
AC (cosφ=1)
30,000 operations min.
8 A at 30 VDC
30,000 operations min.
G2RL-1A-E
Pilot duty (A300), 250 V
AC
250,000 operations min.
Pilot duty (A300), 125 V
AC
150,000 operations min.
Note: The results shown reflect values measured using very severe test conditions i.e., Duty: 1 sec ON/1 sec OFF.
Electrical endurance will vary depending on the test conditions. Contact your OMRON representative if you require more detailed
information
for the electrical endurance under your test conditions.
Dimensions
Note:
All units are in millimeters unless otherwise indicated.
* Indicates
average
dimensions.
G2RL-1A, G2RL-1A4
Four,
1.3
±0.1 dia.
holes
Mounting Holes
(Bottom V
iew)
T
erminal Arrangement/
Internal Connection
(Bottom V
iew)
3
45
1(2.5)
Five,
1.3
±0.1 dia.
holes
Mounting Holes
(Bottom V
iew)
T
erminal Arrangement/
Internal Connection
(Bottom V
iew)
* Indicates
average
dimensions.
G2RL-1, G2RL-14
13
45
2(2.5)
Six,
1.3
±0.1 dia.
holes
Mounting Holes
(Bottom V
iew)
T
erminal Arrangement/
Internal Connection
(Bottom V
iew)
* Indicates
average
dimensions.
G2RL-1A-E, G2RL-1A4-E
4
5
3
6
1
8
(2.5)
G2RL G2RL
8
Eight,
1.3
±0.1 dia.
holes
Mounting Holes
(Bottom V
iew)
T
erminal Arrangement/
Internal Connection
(Bottom V
iew)
* Indicates
average
dimensions.
G2RL-1-E, G2RL-14-E
1
8
2
7
3
6
4
5
(2.5)
Six,
1.3
±0.1 dia.
holes
Mounting Holes
(Bottom V
iew)
T
erminal Arrangement/
Internal Connection
(Bottom V
iew)
* Indicates
average
dimensions.
G2RL-2A, G2RL-2A4
1
8
3
6
4
5
(2.5)
Eight,
1.3
±0.1 dia.
holes
Mounting Holes
(Bottom V
iew)
T
erminal Arrangement/
Internal Connection
(Bottom V
iew)
* Indicates
average
dimensions.
G2RL-2, G2RL-24
1
8
2
7
3
6
4
5
(2.5)
Precautions
Basic Information
Before actually committing any component to a mass-production
situation, OMRON strongly recommends situational testing, in as
close
to actual production
situations as possible. One reason is to
confirm
that the product will still perform as
expected after surviving
the
many handling and mounting processes involved in mass
pro
-
duction.
Also, even though OMRON relays are individually tested
a
number
of
times, and each meets strict requirements, a certain test
-
ing tolerance is permissible. When a high-precision product uses
many components, each depends upon the rated performance
thresholds
of the other components. Thus, the overall performance
tolerance may accumulate into undesirable levels. To avoid prob-
lems,
always conduct tests under the
actual application conditions.
General
To
maintain the initial characteristics of a relay
, exercise care that
it
is not dropped or mishandled. For the same reason, do not remove
the case of the relay; otherwise, the characteristics may degrade.
Avoid using the relay in an atmosphere containing sulfuric acid
(SO2), hydrogen sulfide (H2S), or other corrosive gases. Do not
continuously apply a voltage higher than the rated maximum volt-
age
to the relay
. Never try to operate the relay at a voltage and a cur
-
rent
other than those rated.
Do
not use the relay at temperatures higher
than that specified in the
catalog
or data sheet.
OMRON Corporation
Electronics
Components Company
C&C Components Division H.Q.
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
T
el: (81)75-344-7097/Fax: (81)75-344-7049
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To
convert millimeters into inches, multiply by 0.03937. T
o convert grams into ounces, multiply by 0.03527.
Cat. No. J117-E1-2 In the interest of product improvement, specifications are subject to change without notice.
Printed
in Japan
0301-1.5M (0999) (O)