DATA S H E E T MINIATURE SIGNAL RELAY ED2/EF2 SERIES Ultra-low power, compact and lightweight, High breakdown voltage, Surface mounting type DESCRIPTION NEC's new miniature signal relays, ED2/EF2 series, achieved 50 mW of ultra low power consumption. FEATURES TM Low power consumption (50 mW) TM Applicable for the surge voltage standard of FCC (1500 V, 10 x 160 s) and BELLCORE (2500 V, 2 x 10 s) TM Two types for through-hole mounting (ED2 series) and surface mounting (EF2 series) TM Variation of dense mounting type and/or long-joint-life type for latest SMT * Compatible configuration and terminal allocation with dense mounting type of EE2 series * Upgraded soldering joint reliability between the relay terminal and PCB by optimization of the terminal configuration; 20-year-joint-life under 35C-per-day-temperature-difference specified in IPC-SM-785 for telecommuication equipment APPLICATIONS Electronic switching systems, PBX, terminal equipment, telephone system, instrumental equipment. For Right Use of Miniature Relays DO NOT EXCEED MAXIMUM RATINGS. Do not use relays under exceeding conditions such as over ambient temperature, over voltage and over current. Incorrect use could result in abnormal heating, damage to related parts or cause burning. READ CAUTIONS IN THE SELECTION GUIDE. Read the cautions described in NEC's "Miniature Relays" (ER0046EJ) when you choose relays for your application. The information in this document is subject to change without notice. Document No. ER0304EJ2V0DS00 (2nd edition) Date Published February 1999 M Printed in Japan (c) 1997 ED2/EF2 SERIES DIMENSIONS AND PAD LAYOUTS (Unit : mm (inch)) 0.25 (0.01) 2.54 (0.100) 5.08 (0.20) 10- 0.8 (0.031) 2.54 (0.100) 4 x 2.54 (0.100) 2.54(0.100) 9.4(0.37) MAX. 5.08 2.54 2.54 2.54 (0.20)(0.10)(0.10)(0.10) 3.2 (0.13) 0.5 (0.02) Double coil latch 2 x 2.54(0.1) 8 - 0.8 (0.031) 7.5 (0.30) MAX. 15.0 (0.59) MAX. 2.54(0.1) Non-latch and Single coil latch 2 x 2.54(0.100) ED2 SERIES 5 x 2.54 (0.100) (Bottom fiew) Note. General tolerance : 0.2 (0.008) Dimensions in show basic size. NJ type : Leads-2.8 mm (0.110) Note. General tolerance : 0.1 (0.004) EF2 SERIES EF2-.. EF2-..NU EF2-..NUX 1.0(0.039) 7.5 MAX. (0.296) note2 7.5 MAX. (0.296) 15.0 MAX. (0.591) note2 5.08 (0.200) B 10.35 MAX. (0.408) 1.35 (0.053) 10.0 MAX. (0.394) 1.0 (0.039) A 15.0 MAX. (0.591) note2 5.08 (0.200) note2 5.08 (0.200) 9.5 (0.374) 2-2.54 (2-0.100) 5.08 (0.200) 5.08 (0.2) 9.0 (0.354) 2-2.54 (2-0.100) 3-2.54 (0.100) (Bottom view) EF2-..NUH EF2-..NUN 1.6 (0.063) note2 5.08 (0.200) 2-2.54 (2-0.100) 7.5 MAX. (0.296) 10.6 MAX. (0.418) 15.0 MAX. (0.591) 10.0 MAX. (0.394) 7.5 MAX. (0.296) 1.0 (0.039) 15.0 MAX. (0.591) note2 5.08 (0.200) 7.5 (0.295) 5.08 (0.200) 2-2.54 (2-0.100) 5.08 (0.200) 7.5 (0.295) Note 1. General torelance : 0.2 ( 0.008) Note 2. This pair of pins at the right end applies to double coil latch type only. 2 DATA SHEET ER0304EJ2V0DS00 Type EF2-.. EF2-..NU EF2-..NUX EF2-..NUH EF2-..NUN A 3.0 (0.118) 3.0 (0.118) 2.73 (0.107) 2.0 (0.079) 2.0 (0.079) B 7.29 (0.287) 7.29 (0.287) 7.02 (0.276) 6.29 (0.248) 6.29 (0.248) Note 1. General torelance : 0.1 ( 0.004) Note 2. This pair of pads at the right end applies to double coil latch type only. ED2/EF2 SERIES PIN CONFIGURATIONS (bottom view) ED2 SERIES 1 3 4 5 1 3 4 5 1 R S 12 Index mark of relay direction 10 9 8 4 5 6 S 12 Non-latch type (not energized position) 3 10 9 8 R 12 Single coil latch type (reset position) 10 9 8 7 Double coil latch type (reset position) S : Coil polarity of set (operate) R : Coil polarity of reset (release) EF2 SERIES 1 3 4 5 1 3 4 5 1 R S Index mark of relay direction 12 10 9 8 4 5 6 S 12 Non-latch type (not energized position) 3 10 9 8 R 12 Single coil latch type (reset position) 10 9 8 7 Double coil latch type (reset position) S : Coil polarity of set (operate) R : Coil polarity of reset (release) MARKINGS (top view) 1 1 q Part number 2 2 ED2-5 w Manufacturer ED2-5NU e Country of origin r Date code 5 JAPAN 9717 JAPAN 5 9717 6 t Index mark of relay direction (pin No. 1, 12) 3 4 3 Standard type 4 y UL, CSA Marking UL recognized, CSA certified type (Under application for latch type) SAFETY STANDARD AND RATING UL Recognized CSA Certificated (UL508)* (CSA C22.2 No14) File No E73266 File No LR46266 30 Vdc, 1 A (Resistive) 110 Vdc, 0.3 A (Resistive) 125 Vac, 0.5 A (Resistive) * Spacing : UL114, UL478 DATA SHEET ER0304EJ2V0DS00 3 ED2/EF2 SERIES PERFORMANCE CHARACTERISTICS (Community) Contact Form Contact Ratings 2 Form c Maximum Switching Power 30 W (resistive) 62.5 VA (resistive) Maximum Switching Voltage 220 Vdc 250 Vac Maximum Switching Current 1A Maximum Carrying Current 2A Minimum Contact Ratings 10 mV.dc, 10 A *4 Initial Contact Resistance 50 m typ. (Initial) Contact Material Nominal Operating Power Silver alloy with gold alloy overlay Non-Latch Type 50 to 70 mW Single Coil Latch Type 30 to 80 mW Double Latch Type 50 to 80 mW Operate Time (Excluding Bounce) Approximately 3 ms Release Time (Excluding Bounce) Approximately 2 ms without diode Insulation Resistance 1000 M at 500 Vdc Between Open Contacts Breakdown Voltage 1000 Vac for one minute (1500 V surge, 10 x 160 s 1) Between Adjacent Contacts Between Coil and Contact Non-latch type and single-coil latch type 1500 Vac for one minute (2500 V surge, 2 x 10 s *2) Double-coil latch type 1000 Vac for one minute (1500 V surge, 10 x 160 s *1) Shock Resistance 735 m / s2 (75 G) (misoperating) 980 m / s2 (100 G) (destructive failure) Vibration Resistance 10 to 55 Hz at double amplitude of 3 mm (20 G) (misoperating) 10 to 55 Hz, double amplitude of 5 mm (30 G) (Destructive failure) Non-latch type (Additional "N"): -40 to +85C Ambient Temperature Non-latch type (Standard): -40 to +70C Latch type : -40 to +70C Coil Temperature Rise 7 degrees at nominal coil voltage (50 mW) No-load Running specifications Load Weight 1 x 108 *3 operations (Non-latch type) 1 x 107 operations (Latch type) 50 Vdc 0.1 A (resistive), 1 x 106 operations at 70C 10 Vdc 10 mA (resistive), 1 x 106 operations at 70C Approximately 2.2 grams 1 rise time : 10 s, fall time : 160 s 2 rise time : 2 s, fall time : 10 s 3 This shows a number of operation where it can be running by which a fatal is not caused, and number of operation by wich a stesdy characteristic is maintained is 1 x 107 times. 4 This value is a reference value in the resistive load. Minimum capacity changes depending on seitching frequency and enviroment temperature and the load. 4 DATA SHEET ER0304EJ2V0DS00 ED2/EF2 SERIES PART NUMBER SYSTEM ED2 - 9 S NU EF2 - 5 S NUH Feature Nil NU NUX NUH NUN Nil : Standard type NU : UL recognized, CSA certified type NJ : Trimed leads (UL recognized, CSA certified type) Latch type Nil : Non-latch type (Note 1) S : Single coil latch type T : Double coil latch type : Standard type : UL recognized, CSA certified type : High solder joint reliability (20 years) : Minimum footprint (7.5 x 15) : High solder joint reliability with minimum footprint Latch type Nil : Non-latch type (Note 2) S : Single coil latch type T : Double coil latch type Nominal coil voltage 1.5, 3, 4.5, 5, 6, 9, 12, 24 V Nominal coil voltage 1.5, 3, 4.5, 5, 6, 9, 12, 24 volts ED2 series EF2 series (UL, CSA : Under application for latch type) Note 1. There are two specification in operate voltage of Non-latch type relay. Additional "N" type Standard type Part Number Must Operate Voltage ED2-*NU -*NJ 75% ED2- 80% : Nominal coil voltage Note 2. There are two specification in operate voltage of Non-latch type relay. Additional "N" type Standard type Part Number Must Operate Voltage ED2-*NU -*NUX -*NUH -*NUN 75% EF2- 80% : Nominal coil voltage DATA SHEET ER0304EJ2V0DS00 5 ED2/EF2 SERIES NOMINAL LINEUP (Community) Non-latch Type (Standard) at 20C Must Operate Voltage (Vdc) Must Release Voltage (Vdc) Nominal operate power (mW) 45 1.2 0.15 50 3 180 2.4 0.3 50 4.5 405 3.6 0.45 50 5 500 4 0.5 50 6 720 4.8 0.6 50 Nominal Coil Voltage (Vdc) 1.5 Coil Resistance () 10 % 9 1473 7.2 0.9 55 12 2400 9.6 1.2 60 24 8229 19.2 2.4 70 Must Operate Voltage (Vdc) Must Release Voltage (Vdc) Nominal operate power (mW) Non-latch Type (Additional "N") Nominal Coil Voltage (Vdc) 1.5 Coil Resistance () 10 % at 20C 45 1.13 0.15 50 3 180 2.25 0.3 50 4.5 405 3.38 0.45 50 5 500 3.75 0.5 50 6 720 4.5 0.6 50 9 1473 6.75 0.9 55 12 2400 9 1.2 60 24 8229 18 2.4 70 Must Operate Voltage (Vdc) Must Release Voltage (Vdc) Nominal operate power (mW) 75 1.2 1.2 30 3 300 2.4 2.4 30 4.5 675 3.6 3.6 30 5 833 4 4 30 6 1200 4.8 4.8 30 Single-Coil Latch Type Nominal Coil Voltage (Vdc) 1.5 6 at 20C Coil Resistance () 10 % 9 2700 7.2 7.2 30 12 4800 9.6 9.6 30 24 7200 19.2 19.2 80 DATA SHEET ER0304EJ2V0DS00 ED2/EF2 SERIES Double-Coil Latch Type at 20C Nominal Coil Voltage (Vdc) Coil Resistance () 10 % 1.5 3 4.5 5 6 9 12 24 Must Operate Voltage (Vdc) Must Release Voltage (Vdc) S 45 1.2 - R 45 - 1.2 S 180 2.4 - R 180 - 2.4 S 405 3.6 - R 405 - 3.6 S 500 R 500 - S 720 4.8 - R 720 - 4.8 S 1620 7.2 - R 1620 - 7.2 S 2880 9.6 - R 2880 - 9.6 S 7200 R 7200 4 Nominal operate power (mW) 50 50 50 - 50 4 19.2 50 50 50 - - 80 19.2 Recommended coil voltage with ambient temperature Non latch typ (Additional "N") Latch typ 150 - 40% / 45 deg 110% 100 90 95% 80 + 20% / 65 deg 70 75% 60 50 - 40 A ratio of nominal coil voltage (%) A ratio of nominal coil voltage (%) 150 - 40% / 30 deg 110% 100 +10% / 50 deg 90 95% 80 85% 70 60 73% 50 57% - 40 0 20 40 60 80 - 40 Ambient temperature (C) - 40 0 20 40 60 80 Ambient temperature (C) DATA SHEET ER0304EJ2V0DS00 7 ED2/EF2 SERIES TYPICAL PERFORMANCE DATA Coil Temperature Rise Breakdown Voltage Cumulative Distribution(%) Coil Temperature Rise(deg) 20 15 10 5 0 50 100 150 Applied Power(mW) at 20C 99.99 99.9 99 95 90 80 60 40 20 10 5 Between adjacent contacts Between coil and contacts Between open contacts 1 0.1 0.01 1 2 200 Operate Time 3 4 5 Breakdown Voltage(KV,AC) Release Time without diode 2 Bounce Time at Operate 0 50 100 150 Applied Power(mW) 200 0 50 10 20 30 40 50 60 70 80 90 100 Contact Resistance(m) 150 200 4 Release Time 2 Bounce Time at Release 0 50 100 150 200 Applied power(mW) Transfer Time DC Load(resistive) AC Load(resistive) 1.0 0.5 0.4 0.3 0.2 99.99 99.9 99 95 90 80 60 40 20 10 5 1 0.1 0.01 0 30 100 200 Switching Voltage(V) 8 100 Release Time with diode Switching Capacity Switching Capacity(A) Bounce Time at Release Applied Power(mW) Make contact Break contact 2.0 Release Time 1 Cumulative Distribution(%) Cumulative Distribution(%) 1 0.1 0.01 0 2 250 Contact Resistance 99.99 99.9 99 95 90 80 60 40 20 10 5 Release Time or Bounce Time at Release(ms) 4 Release Time or Bounce Time at Release(ms) Operate Time or Bounce Time at Operate(ms) Operate Time DATA SHEET ER0304EJ2V0DS00 At operate At release 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 Transfer Time(ms) ED2/EF2 SERIES 40 30 20 10 0 -10 -20 -30 -40 Drift of Release Voltage(%) Drift of Operate Voltage(%) Magnetic Interference (ED2 Relay) Max. Min. II I III IV V VI 40 30 20 10 0 -10 -20 -30 -40 Max. Min. II I III OFF ON ON Layout I Layout II Layout III ON OFF ON OFF ON OFF VI OFF OFF Layout IV Mounting Layout mm(inch) Sample Layout V V 2.54 (0.1) OFF ON , , , , , , ON IV Layout Layout Layout VI Mechanical Life at 70C, 50 operation/sec Operate Voltage Release Voltage Operate Voltage or Release Voltage(V) 4 3 2 1 0 1 1000 Contact Resistance(m) 5 2 3 4 10 5 Number of Operations(x10 operations) 500 at 70C, 50 operations/sec Make contact Break contact 300 200 100 50 30 20 10 0 DATA SHEET ER0304EJ2V0DS00 1 2 3 5 10 5 Number of Operations(x10 operations) 9 ED2/EF2 SERIES TUBE PACKAGE (ED2, EF2) Dimension of Package (Unit : mm) 35 pieces / Tube Material : Polyvinyl chloride (anti-static treated) 543 1 15.5 0.3 (0.5 t) (4.8) 11.9 0.3 (2.4) ( ) Reference Outline of Package Rubber stopper (Red) Rubber stopper (Green) Index Mark TAPE PACKAGE (EF2) Embossed carrying tape 1.5 (0.054) 16.0(0.63) 4.0(0.157) 0.4 (0.016) 2.2 (0.087) 15.5 (0.610) 2.0(0.079) Top cover tape A 11.5 (0.453) 24.0(0.945) Reel TAPE DIMENSION mm (inch) 1.75(0.069) APPEARANCE B A EF2- Max.10.9 EF2-NU (0.429) EF2-NUX EF2-NUH Max.11.1 EF2-NUN (0.437) Relay orientation mark and tape carrying direction. Orientation mark Orientation mark Tape carrying direction Carrying tape type Part number 10 L EF2-***-L DATA SHEET ER0304EJ2V0DS00 R EF2-****-R B 10.0 (0.394) 8.0 (0.315) ED2/EF2 SERIES SOLDERING TEMPERATURE CONDITION Through-hole mounting type (ED2) q Automatic soldering * Preheating : 100C max. 1 minute max. * Solder temperature : 250C max. * Solder time : 10 seconds max. w Manual soldering * Solder temperature : 350C max. * Solder time : 3 seconds max. Surface mounting type (EF2) IRS Method T max.; 235 Temperature (C) 200 175 150 30 sec. 80 sec. 200 sec. Time VPS Method Temperature (C) T max.; 215 200 max. 165 max. 100 max. Time 60 sec. max. 60 sec. 90 sec. max. Note: 1. Temperature profile shows printed circuit board surface temperature on the relay terminal portion. 2. Check the actual soldering condition to use other method except above mentioned temperature profiles. DATA SHEET ER0304EJ2V0DS00 11 ED2/EF2 SERIES GUIDE TO APPLICATIONS 1. When connecting coils, refer to the pin configuration to prevent misoperation or malfunction. 2. The latch type relay should be initialized at the appointed position (set or reset position) when using, and should be energized or deenergized to the specified polarity to avoid wrong operations by reversed contact state. 3. Ultrasonic cleaning is not recommended to keep contact performance reliable. Alcohol based solvents are available as proper solvents. 4. Pressurized stress on the relay cover may affect reliable operation. 5. Minimum contact load of the relay is 10 mVdc, 10 A. This value is a reference value in the resistance load. Minimum capacity changes depending on switching frequency and environment temperature and the load. 12 DATA SHEET ER0304EJ2V0DS00 ED2/EF2 SERIES DATA SHEET ER0304EJ2V0DS00 13 ED2/EF2 SERIES 14 DATA SHEET ER0304EJ2V0DS00 ED2/EF2 SERIES DATA SHEET ER0304EJ2V0DS00 15 ED2/EF2 SERIES No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its electronic components, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC electronic component, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and antifailure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product.