19-4397; Rev 0; 12/08 MAX9928 Evaluation Kit The MAX9928 evaluation kit (EV kit) provides a proven design to evaluate the MAX9928 uni-/bidirectional, highside, current-sense amplifier, which offers precision accuracy specifications of V OS < 400V and gain error < 1.0%. This EV kit demonstrates the MAX9928 in an ultrasmall, 1mm x 1.5mm x 0.6mm, 6-bump UCSPTM package. The MAX9928 is also available in an 8-pin MAX(R), but that package is not compatible with this EV kit. The MAX9928 EV kit PCB comes with a MAX9928FABT+ installed, which is the 5A/mV gain version. The MAX9928 EV kit can also be used to evaluate the MAX9928T, MAX9929F, and MAX9929T (2A/mV, 50V/V, and 20V/V, respectively). This EV kit can also evaluate the MAX4372 in a footprint-compatible UCSP package. Contact the factory for free samples of the pin-compatible MAX9928TABT+, MAX9929FABT+, or MAX9929TABT+ devices. Features o Precision Real-Time Current Monitoring o -0.1V to +28V Input Common-Mode Range o Evaluates MAX9928, MAX9929, and MAX4372 o VOS < 0.4mV; Gain Error < 1% o SIGN Bit to Show Charge/Discharge Current Flow o Lead(Pb)-Free and RoHS Compliant o Proven PCB Layout o Fully Assembled and Tested Ordering Information PART TYPE MAX9928EVKIT+ EV Kit +Denotes lead(Pb)-free and RoHS compliant. Component List DESIGNATION QTY CIN, COUT 0 Not installed, capacitors (0603) C3 1 0.1F 10%, 50V X7R ceramic capacitor (0603) Murata GRM188R71H104K 1 1F 10%, 50V X5S ceramic capacitor (0603) Taiyo Yuden UMK107C5105KA C4 DESCRIPTION DESIGNATION QTY DESCRIPTION RIN1, RIN2 0 0.1 1%, 1/2W sensing resistor (1206) Vishay/Dale WSL1206R1000FEB18 Not installed, resistors--short ROUT 1 10k 1% resistor (0603) U1 1 Precision current-sense amplifier (6 UCSP) Maxim MAX9928FABT+ -- 1 PCB: MAX9928 Evaluation Kit+ RSENSE 1 Component Suppliers SUPPLIER PHONE WEBSITE Murata Electronics North America, Inc. 770-436-1300 www.murata-northamerica.com Taiyo Yuden 800-348-2496 www.t-yuden.com Vishay 402-563-6866 www.vishay.com Note: Indicate that you are using the MAX9928 when contacting these component suppliers. UCSP is a trademark and MAX is a registered trademark of Maxim Integrated Products, Inc. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 Evaluates: MAX9928/MAX9929/MAX4372 General Description Evaluates: MAX9928/MAX9929/MAX4372 MAX9928 Evaluation Kit Quick Start Detailed Description of Hardware Recommended Equipment The MAX9928 evaluation kit (EV kit) provides a proven design to evaluate the MAX9928 uni-/bidirectional, high-side, current-sense amplifier, which offers precision accuracy specifications of VOS < 400V and gain error < 1.0%. Before beginning, the following equipment is needed: * MAX9928 EV kit * 5V/10mA DC power supply * 12V/1A DC power supply * An electronic load capable of sinking 800mA (e.g., HP 6060B) * Two digital voltmeters Procedure The MAX9928 EV kit is fully assembled and tested. Follow the steps below to verify board operation. Caution: Do not turn on the power supply or the electronic load until all connections are completed. 1) Connect the positive terminal of the 5V supply to the VCC pad. Connect the negative terminal of the 5V supply to the GND pad. 2) Connect the positive terminal of the 12V supply to the RS+ pad. Connect the negative terminal of the 12V supply to the GND pad. 3) Set the electronic load to sink 500mA. 4) Connect the electronic load's positive terminal to the RS- pad and the negative terminal to the GND pad. 5) Connect the first voltmeter across the OUT and the GND pads. 6) Connect the second voltmeter across the SIGN and the GND pads. 7) Turn on the power supplies. 8) Turn on the electronic load. 9) Verify that the OUT voltmeter reading is approximately 2.5V and the SIGN voltmeter is approximately 5V. Take care not to load the internal 1M pullup resistor on the SIGN pin when measuring this voltage. 2 Output Voltage Calculation The MAX9928 EV kit is installed with a MAX9928FABT+, which has a gain of 5A/mV. The current-sense resistor (RSENSE) value is 0.1 with 1% tolerance. The VOUT is given by: VOUT = ILOAD x RSENSE x Gm x ROUT where Gm is the gain and ILOAD is the current load applied to the device. Vary ROUT to change the effective voltage gain. Applying VCC and VRS+ Supply Voltages The normal operating range for VCC is 2.5V to 5.5V for MAX9928/MAX9929. The normal operating range for VCC is 2.7V to 28V for MAX4372. The normal input common-mode range at VRS+ and VRS- is -0.1V to +28V for MAX9928/MAX9929. The MAX4372 operates with an input range of 0V to 28V, but the total OUT error at 0V can be up to 28%. Measuring the Load Current The load current is measured as a voltage drop (VSENSE) across an external sense resistor. This voltage is then amplified by the current-sense amplifier and presented as a current at its output pin and converted to a voltage by ROUT. Like all differential amplifiers, the output voltage has two components of error: an offset error and a gain error. The offset error affects accuracy at small V SENSE and a gain error affects accuracy at large VSENSE. By minimizing both offset and gain errors, accuracy can be optimized over a wide dynamic range. _______________________________________________________________________________________ MAX9928 Evaluation Kit The MAX9928 and MAX9929 have a digital SIGN output to indicate the direction of the load current flow (charge vs. discharge current for a battery). To evaluate current flowing in the opposite direction, swap the position of the 12V supply and the electronic load (connect the 12V supply to RS- and connect the electronic load to RS+). Verify that the OUT voltmeter still reads approximately 2.5V and the SIGN voltmeter has changed to 0V. Evaluating MAX9929 or MAX4372 The MAX9929 and MAX4372 are voltage output devices with an internal 10k R OUT resistor. When evaluating these devices, leave the MAX9928 EV kit ROUT open. Refer to the MAX9928/MAX9929 IC data sheet and/or the MAX4372 IC data sheet for more information. Figure 1. MAX9929F EV Kit Schematic _______________________________________________________________________________________ 3 Evaluates: MAX9928/MAX9929/MAX4372 Evaluating SIGN Output for MAX9928/MAX9929 Evaluates: MAX9928/MAX9929/MAX4372 MAX9928 Evaluation Kit Figure 2. MAX9928 EV Kit Component Placement Guide-- Component Side Figure 3. MAX9928 EV Kit PCB Layout--Component Side Figure 4. MAX9928 EV Kit PCB Layout--Solder Side Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 4 ___________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2008 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Maxim Integrated: MAX9928EVKIT+