F-219 IPL1-106-01-L-D-RE1-K IPL1-110-02-L-S-K-TR IPL1-105-02-L-D-K-TR IPL1-120-01-L-D-RA-K (2.54 mm) .100" IPL1 SERIES DISCRETE WIRE HEADER Mates with discrete wire cable assemblies Mates with: MMSD, MMSS, MMSDT, MMSST SPECIFICATIONS For complete specifications www.samtec.com?IPL1 Insulator Material: Natural LCP Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Operating Temp Range: -55 C to +125 C Voltage Rating: 675 VAC/954 VDC RoHS Compliant: Yes Keyed polarization Align & LatchTM -RE1 APPLICATION MMSD PROCESSING Lead-Free Solderable: Yes -S & -D (-02 Lead Style) SMT Lead Coplanarity: (0.10 mm) .004" max (02-05) (0.13 mm) .005" max (06-10)* (0.15 mm) .006" max (11-25)* *(.004" stencil solution may be available; contact IPG@samtec.com) -SH SMT Lead Coplanarity: (0.15 mm) .006" max (02-25)* *(.004" stencil solution may be available; contact IPG@samtec.com) IPL1 RECOGNITIONS 1 NO. PINS PER ROW For complete scope of recognitions see www.samtec.com/quality LEAD STYLE PLATING OPTION -01 = 10 " (0.25 m) Gold on contact, Matte Tin on tail = Through-hole -02 (Standard sizes) = Surface Mount FILE NO. E111594 -01. -02 & -RA = No. of positions x (2.54) .100 + (1.52) .060 -SH & -RE1 = No. of positions x (2.54) .100 + (4.06) .160 (8.76) .345 (7.04) .277 TAIL OPTION ROW OPTION -L 02, 03, 04, 05, 06, 08, 10, 12, 15, 16, 20, 25 Surface mount, right-angle, right-angle elevated and vertical through-hole (2.54 mm) .100" pitch IPL1-RE1 =Right-angle (-01 lead style only) = Single Row -SH = Single Row Horizontal (-02 lead style only) ALSO AVAILABLE -D = Double Row (MOQ Required) * Other sizes * With or without plug polarization * Guide post holes * Other platings * Weld tab -02-D (5.59) .220 (2.54) .100 (5.44) .214 -01-D (2.16) .085 -01-S -01-S-RE1 (1.02) .040 (8.13) .320 -02 -01 (8.26) .325 (2.16) .085 (2.54) .100 (0.64) .025 SQ -02-SH (2.03) .080 (3.05) .120 (6.35) .250 (7.62) .300 Note: Some lengths, styles and options are non-standard, non-returnable. (5.46) .215 (2.54) .100 01 02 (8.76) .345 (6.86) .270 (6.10) .240 02 =Keyed Polarization -RE1 01 (5.08) .200 -K = Tape & Reel (-02 lead style only) Comes with Polyimide Pick & Place Pad =Right-angle Elevated (-01 lead style only) (-K is a required callout) -02-S (9.58) .377 OPTION -TR -RA -S K (1.52) .060 (2.03) .080 (2.54) .100 -01-S-RA -RA -01-D-RA -01-D-RE1 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.