MINI-MELF-SMD | Applications LL4153 Silicon Diode Switching Used in general purpose applications, where a low current controlled forward characteristic and fast switching speed are important. BKC can produce generic equivalents to JAN/ TX/ TXV. and s level per _ MIL-S-19500/ 437 with intemal source control drawings. . Use HR, HRX, HRV or HRS suffixes for cost effective high reliability parts. Featu res e Six sigma quality e Metallurgically bonded e BKC's Sigma Bond plating for problem free solderability e Available in DO-35 package with approval to Mil-S-19500 / 437 LL-34/35 MINI-MELF SMD Package (DO-213AA) (nominal dimensions) Maximum Ratings Symbol Value Unit Peak inverse Voltage _@ 5uA & 0.1pA @ -55 C PIV 75 (Min.) Volts Average Rectified Current lav 150 mAmps Continuous Forward Current lec 300 mAmps Peak Surge Current (t,,,,= 1 Sec.) leak 0.25 Amp Power Dissipation Teng cep = 90 C Prt 500 mWatts Operating and Storage Temperature Range Topast -65 to +200 C Electrical Characteristics @ 25C Symbol Minimum Maximum Unit Forward Voltage Drop @ I, = 100 yA V; 0.49 0.55 Volts Forward Voltage Drop @ I, = 250 yA V, 0.53 0.59 Volts Forward Voltage Drop @ |= 1.0 mA V; 0.59 0.67 Volts Forward Voltage Drop @ |. = 2.0 mA V; 0.62 0.70 Volts Forward Voltage Drop @ |, = 10 mA V; 0.70 0.81 Volts Forward Voltage Drop @ |, = 20 mA V; 0.74 0.88 Volts a Reverse Leakage Current @V,=50V| |, "50 nA a Reverse Leakage Current @ V, = 50 V le 50 @ 150C pA ome Capacitance @ V,=O0V, f= imHz C. 2.0 pF om Reverse Recovery Time (note 1) t, 4.0 nSecs = Note 1: Per Method 4031-B with I, =I, = 10 mA, R, = 100 Ohms, C =3 Pf. = For equivalent MIL devices, use 1N4153UR-1 along with the appropriate HR, HRX, HRV or HRS suffix. The SMD DO-213AA also comes in a commercial and a military DO-35 leaded version (1N4153). BKC Semiconductors 6 Lake Street Incorporated Lawrence, MA USA 01841 Telephone (508) 681-0392 FAX (508) 681-9135