DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V 6.3 V TO 50 V 10 nF to 47 F Product Specification - Feb 04, 2010 V.2 RoHS compliant & Halogen Free Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. Y5V 6.3 V to 50 V 2 14 SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP This specification describes Y5V series chip capacitors with leadfree terminations. All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. APPLICATIONS Consumer electronics, for example: - Tuners - Television receivers - Video recorders - All types of cameras - Mobile telephones FEATURES Supplied in tape on reel Nickel-barrier end termination RoHS compliant Halogen Free compliant CTC & 12NC YAGEO BRAND ordering code GLOBAL PART NUMBER ( PREFERRED ) CC XXX XXXX X X (1) Y5V (2) (3) X BB (4) (5) (1) SIZE - INCH BASED (METRIC) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) (2) TOLERANCE M = 20% Z = -20% to +80% (3) PACKING STYLE R = Paper/PE taping reel; Reel 7 inch K = Blister taping reel; Reel 7 inch P = Paper/PE taping reel; Reel 13 inch F = Blister taping reel; Reel 13 inch C = Bulk case (4) RATED VOLTAGE 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V (5) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 103 = 10 x 103 = 10,000 pF = 10 nF www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. Y5V 6.3 V to 50 V 3 14 PHYCOMP BRAND ordering codes GLOBAL PART NUMBER (preferred), PHYCOMP CTC (for North America) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER ( PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE handbook, full pagewidth 2 2 XX XX X X 9 X XX Capacitance value(1) Carrier type 50 = Blister (6.3 V) 55 = Paper/PE (6.3 V) 22 = Blister 38 = Paper/PE 54 = Bulk Tolerance 7 = 20% 8 = -20 to +80% Voltage 20 = 6.3 V 24 = 10 V 78 = 16 V 91 = 25 V 58 = 50 V Packaging(2) 1 = reel: 180 mm; 7" 5 = reel: 330 mm; 13" 4 = bulk case YNM0009 Size 8 = 0201 7 = 0402 6 = 0603 0 = 0805 1 = 1206 2 = 1210 (1) Please refer to "Last 2-digit of 12NC" in "CAPACITANCE RANGE & THICKNESS FOR Y5V" (2) Quantity on reel depends on thickness classification; see table 5 PHYCOMP CTC CODE ( FOR NORTH AMERICA ) Example: 12062F105M8BB0D 1206 2F 105 M Size code Temp. Char. Capacitance in pF Tolerance 0201 2F = Y5V 0402 0603 0805 1206 1210 8 Voltage Termination 101 = 100 pF; M = 20% 5 = 6.3 V the third digit Z = -20% to +80% 6 = 10 V signifies the 7 = 16 V multiplying factor: 8 = 25 V 0=x1 9 = 50 V 1 = x 10 2 = x 100 B B = NiSn B 0 D Packing Marking Range identifier 2 = 180 mm 0 = no marking D = Class 2 MLCC 7" Paper/PE 3 = 330 mm 13" Paper/PE B = 180 mm 7" Blister 3 = x 1,000 F = 330 mm 13" Blister 4 = x 10,000 P = Bulk case 5 = x 100,000 6 = x 1,000,000 www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. Y5V 6.3 V to 50 V 4 14 CONSTRUCTION The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminations and finally covered with a layer of plated tin (NiSn). The terminations are lead-free. A cross section of the structure is shown in Fig.1. terminations electrodes MLB457 ceramic material Fig. 1 Surface mounted multilayer ceramic capacitor construction DIMENSION Table 1 For outlines see fig. 2 TYPE L1 (mm) W (mm) 0201 0402 0603 0.6 0.03 1.0 0.05 0805 1206 1210 1812 OUTLINES T (MM) L2 / L3 (mm) L4 (mm) min. max. 0.3 0.03 0.10 0.20 0.20 0.5 0.05 0.20 0.30 0.40 1.6 0.10 0.8 0.10 0.20 0.60 0.40 2.0 0.10 (1) 1.25 0.10 (1) 2.0 0.20 (2) 1.25 0.20 (2) 0.25 0.75 0.55 3.2 0.15 (1) 1.6 0.15 3.2 0.20 (2) 1.6 0.20 (2) 3.2 0.20 (1) 0.20 (1) 3.2 0.30 (2) 4.5 0.20 (1) 4.5 0.40 (2) 2.5 (1) 2.5 0.30 (2) 3.2 0.20 Refer to table 2 to 4 For dimension see Table 1 min. W T L2 L4 L3 MBB211 L1 0.25 0.75 1.40 Fig. 2 Surface mounted multilayer ceramic capacitor dimension 0.25 0.75 1.40 0.25 0.75 2.20 NOTE 1. Dimension for size 0805 to 1812, C < 1 F 2. Dimension for size 0805 to 1812, C 1 F www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. Y5V 6.3 V to 50 V 5 14 CAPACITANCE RANGE & THICKNESS FOR Y5V Table 2 Sizes from 0201 to 0402 CAP. Last 2-digit of 0201 12NC 6.3 V 10 nF 36 22 nF 41 47 nF 45 100 nF 49 220 nF 52 470 nF 58 1.0 F 63 2.2 F 67 4.7 F 72 10 F 76 22 F 81 47 F 85 0402 25 V 6.3 V 10 V 16 V 25 V 50 V 0.30.03 0.50.05 0.50.05 0.50.05 0.30.03 0.50.05 0.50.05 Table 3 Sizes from 0603 to 0805 CAP. Last 2-digit of 0603 12NC 6.3 V 10 nF 36 22 nF 41 47 nF 45 100 nF 49 220 nF 52 470 nF 58 1.0 F 63 2.2 F 67 4.7 F 72 10 F 76 22 F 81 47 F 85 0805 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 0.80.1 25 V 50 V 0.60.1 0.60.1 0.80.1 0.60.1 0.80.1 0.80.1 0.80.1 0.850.1 0.850.1 0.850.1 1.250.2 0.850.1 1.250.2 0.850.1 0.850.1 1.250.2 1.250.2 1.250.2 1.250.2 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-3 series is on request www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. Y5V 6.3 V to 50 V 6 14 CAPACITANCE RANGE & THICKNESS FOR Y5V Table 4 Sizes from 1206 to 1210 CAP. Last 2-digit of 1206 12NC 6.3 V 10 nF 36 22 nF 41 47 nF 45 100 nF 49 220 nF 52 470 nF 58 1.0 F 63 2.2 F 67 4.7 F 72 10 F 76 0.850.1 22 F 81 1.60.2 47 F 85 1210 10 V 16 V 25 V 50 V 0.60.1 0.60.1 0.850.1 0.850.1 10 V 16 V 25 V 1.50.1 1.50.1 1.50.1 1.60.2 1.60.2 0.850.1 0.850.1 1.150.1 1.60.2 6.3 V 1.60.2 1.60.2 2.00.2 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-3 series is on request www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. Y5V 6.3 V to 50 V 7 14 THICKNESS CLASSES AND PACKING QUANTITY Table 5 SIZE CODE THICKNESS CLASSIFICATION TAPE WIDTH QUANTITY PER REEL 0201 0.3 0.03 mm 0402 0603 0805 1206 O180 MM / 7 INCH O330 MM / 13 INCH Paper Blister Paper Blister QUANTITY PER BULK CASE 8 mm 15,000 --- 50,000 --- --- 0.5 0.05 mm 8 mm 10,000 --- 50,000 --- 50,000 0.8 0.1 mm 8 mm 4,000 --- 15,000 --- 15,000 0.6 0.1 mm 8 mm 4,000 --- 20,000 --- 10,000 0.85 0.1 mm 8 mm 4,000 --- 15,000 --- 8,000 1.25 0.2 mm 8 mm --- 3,000 --- 10,000 5,000 0.6 0.1 mm 8 mm 4,000 --- 20,000 --- --- 0.85 0.1 mm 8 mm 4,000 --- 15,000 --- --- 1.00 / 1.15 0.1 mm 8 mm --- 3,000 --- 10,000 --- 1.25 0.2 mm 8 mm --- 3,000 --- 10,000 --- 1.6 0.15 mm 8 mm --- 2,500 --- 10,000 --- 1.6 0.2 mm 8 mm --- 2,000 --- 10,000 --- 1210 0.6 / 0.7 0.1 mm 8 mm --- 4,000 --- 15,000 --- 0.85 0.1 mm 8 mm --- 4,000 --- 10,000 --- 1.15 0.1 mm 8 mm --- 3,000 --- 10,000 --- 1.15 0.15 mm 8 mm --- 3,000 --- 10,000 --- 1.25 0.2 mm 8 mm --- 3,000 --- --- --- 1.5 0.1 mm 8 mm --- 2,000 --- --- --- 1.6 / 1.9 0.2 mm 8 mm --- 2,000 --- --- --- 2.0 0.2 mm 8 mm --- 2,000 1,000 --- --- --- 2.5 0.2 mm 8 mm --- 1,000 500 --- --- --- 1.15 0.15 mm 12 mm --- 3,000 --- --- --- 1.25 0.2 mm 12 mm --- 3,000 --- --- --- 1.35 0.15 mm 12 mm --- 2,000 --- --- --- 1.5 0.1 mm 12 mm --- 2,000 --- --- --- 1.6 0.2 mm 12 mm --- 2,000 --- --- --- 2.0 0.2 mm 12 mm --- 2,000 --- --- --- 0.6 / 0.85 0.1 mm 12 mm --- 2,000 --- --- --- 1808 1812 1.15 0.1 mm 12 mm --- 1,500 --- --- --- 1.15 0.15 mm 12 mm --- 1,500 --- --- --- 1.35 0.15 mm 12 mm --- 1,000 --- --- --- 1.5 0.1 mm 12 mm --- 1,000 --- --- --- 1.6 0.2 mm 12 mm --- 1,000 --- --- --- 2.0 0.2 mm 12 mm --- 1,000 --- --- --- 2.5 0.2 mm 12 mm --- 500 50,000 --- --- www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. Y5V 6.3 V to 50 V 8 14 ELECTRICAL CHARACTERISTICS Y5V DIELECTRIC CAPACITORS; NISN TERMINATIONS Unless otherwise stated all electrical values apply at an ambient temperature of 201 C, an atmospheric pressure of 86 to 106 kPa, and a relative humidity of 63 to 67%. Table 6 VALUE DESCRIPTION Capacitance range 10 nF to 47 F 20% Capacitance tolerance -20% to +80% Dissipation factor (D.F.) 6.3 V 15% Exception: 0805 22 F 20% 10 V 12.5% Exception: 0402 680 nF; 0603 2.2 F; 0805 10 F; 16 V 1206 10 F 15% 20% 12.5% Exception: 0603 4.7 F 25 V 15% 9% Exception: 0201 10 nF Insulation resistance after 1 minute at Ur (DC) 12.5% Rins 10 G or Rins x Cr 500 seconds whichever is less Maximum capacitance change as a function of temperature (temperature characteristic/coefficient): Operating temperature range: +22% to -82% -30 C to +85 C www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors C C (%) General Purpose & High Cap. YNM0019 25 10 25 35 50 60 75 85 50 V 10 V Fig. 3 30 -5 20 55 70 T ( oC) 110 95 Fig. 4 Typical capacitance change as a function of temperature 6.3 V to 50 V YNM0020 15 C C (%) 0 100 Y5V 9 14 0 10 25 V 16 V 20 30 40 50 V DC (V) Typical capacitance change with respect to the capacitance at 1 V as a function of DC voltage at 20 C MBD078 2000 tan (x 10 4 ) 1500 1000 500 0 25 Fig. 5 0 25 50 75 100 T ( oC) Typical tan as a function of temperature SOLDERING RECOMMENDATION Table 7 SOLDERING METHOD SIZE 0402 0603 0805 1206 1210 Reflow 0.1 F 1.0 F 2.2 F 4.7 F Reflow only Reflow/Wave < 0.1 F < 1.0 F < 2.2 F < 4.7 F --- www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. Y5V 6.3 V to 50 V 10 14 TESTS AND REQUIREMENTS Table 8 Test procedures and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC 6038421/22 4.3 The capacitors may be mounted on printed-circuit boards or ceramic substrates No visible damage Visual inspection and dimension check 4.4 Any applicable method using x 10 magnification In accordance with specification Capacitance 4.5.1 Class 2: f = 1 KHz for C 10 F, measuring at voltage 1 Vrms at 20 C Within specified tolerance f = 120 Hz for C >10 F, measuring at voltage 0.5 Vrms at 20 C Dissipation factor (D.F.) 4.5.2 Class 2: f = 1 KHz for C 10 F, measuring at voltage 1 Vrms at 20 C In accordance with specification f = 120 Hz for C > 10 F, measuring at voltage 0.5 Vrms at 20 C Insulation resistance 4.5.3 At Ur (DC) for 1 minute In accordance with specification Temperature characteristic 4.6 Class 2: Between minimum and maximum temperature Y5V: -30 C to +85 C Normal Temperature: 20 C <General purpose series> C/C Class 2: Y5V: 22% to -82% <High Capacitance series> C/C Class 2: Y5V: 22% to -82% Adhesion 4.7 A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate Force size 0603: 5N size = 0402: 2.5N size = 0201: 1N www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. Y5V TEST TEST METHOD PROCEDURE REQUIREMENTS Bond strength of plating on end face IEC 6038421/22 Mounting in accordance with IEC 60384-22 paragraph 4.3 No visible damage Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 340 mm <General purpose series> 4.8 6.3 V to 50 V 11 14 C/C Class2: Y5V: 10% <High Capacitance series> C/C Class2: Y5V: 10% Resistance to soldering heat 4.9 Precondition: 150 +0/-10 C for 1 hour, then keep for 24 1 hours at room temperature Preheating: for size 1206: 120 C to 150 C for 1 minute Preheating: for size >1206: 100 C to 120 C for 1 minute and 170 C to 200 C for 1 minute Solder bath temperature: 260 5 C Dipping time: 10 0.5 seconds Recovery time: 24 2 hours Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned <General purpose series> C/C Class2: Y5V: 20% <High Capacitance series> C/C Class2: Y5V: 20% D.F. within initial specified value Rins within initial specified value Solderability 4.10 Preheated the temperature of 80 C to 140 C and maintained for 30 seconds to 60 seconds. The solder should cover over 95% of the critical area of each termination Test conditions for lead containing solder alloy Temperature: 235 5 C Dipping time: 2 0.2 seconds Depth of immersion: 10 mm Alloy Composition: 60/40 Sn/Pb Number of immersions: 1 Test conditions for leadfree containing solder alloy Temperature: 245 5 C Dipping time: 3 0.3 seconds Depth of immersion: 10 mm Alloy Composition: SAC305 Number of immersions: 1 www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. TEST TEST METHOD PROCEDURE REQUIREMENTS Rapid change of temperature IEC 6038421/22 Preconditioning; 150 +0/-10 C for 1 hour, then keep for 24 1 hours at room temperature No visual damage 4.11 Y5V 6.3 V to 50 V 12 14 <General purpose series> C/C 5 cycles with following detail: 30 minutes at lower category temperature 30 minutes at upper category temperature Class2: Y5V: 20% <High Capacitance series> Recovery time 24 2 hours C/C Class2: Y5V: 20% D.F. meet initial specified value Rins meet initial specified value Damp heat with Ur load 4.13 1. Preconditioning, class 2 only: 150 +0/-10 C /1 hour, then keep for 24 1 hour at room temp 2. Initial measure: Spec: refer initial spec C, D, IR 3. Damp heat test: 500 12 hours at 40 2 C; 90 to 95% R.H. 1.0 Ur applied 4. Recovery: Class 2: 24 2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be precondition according to "IEC 60384 4.1" and then the requirement shall be met. No visual damage after recovery <General purpose series> C/C Class2: Y5V: 30% D.F. Class2: Y5V: 15% Rins Class2: Y5V: 500 M or Rins x Cr 25s whichever is less <High Capacitance series> C/C Class2: Y5V: 30% D.F. Class2: Y5V: 2 x initial value max Rins Class2: Y5V: 500 M or Rins x Cr 25s whichever is less www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. Y5V TEST TEST METHOD PROCEDURE REQUIREMENTS Endurance IEC 6038421/22 1. Preconditioning, class 2 only: No visual damage 4.14 150 +0/-10 C /1 hour, then keep for 24 1 hour at room temp 2. Initial measure: Spec: refer initial spec C, D, IR 3. Endurance test: Temperature: Y5V: 85 C Specified stress voltage applied for 1,000 hours: Applied 2.0 x Ur for general product. Applied 1.5 x Ur for high cap. product. 4. Recovery time: 24 2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be precondition according to "IEC 60384 4.1" and then the requirement shall be met. 6.3 V to 50 V 13 14 <General purpose series> C/C Class2: Y5V: 30% D.F. Class2: Y5V: 15% Rins Class2: Y5V: 1,000 M or Rins x Cr 50s whichever is less <High Capacitance series> C/C Class 2: Y5V: 30% D.F. Class 2: Y5V: 2 x initial value max Rins Class 2: Y5V: 1,000 M or Rins x Cr 50s whichever is less Voltage proof IEC 60384-1 4.6 Specified stress voltage applied for 1 minute Ur 100 V: series applied 2.5 Ur 100 V < Ur 200 V series applied (1.5 Ur + 100) 200 V < Ur 500 V series applied (1.3 Ur + 100) Ur > 500 V: 1.3 Ur I: 7.5 mA No breakdown or flashover www.yageo.com Feb 04, 2010 V.2 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. Y5V 6.3 V to 50 V 14 14 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 2 Feb 04, 2010 - - The statement of "Halogen Free" on the cover added Version 1 Nov 04, 2009 - - Ordering code updated - Dimension updated Version 0 Apr 15, 2009 - - New datasheet for general purpose and high capacitance Y5V series with RoHS compliant - Replace the "6.3V to 50V" part of pdf files: Y5V_6.3V_10V_9_Preliminary, Y5V_10V-to-50V_10_Preliminary, Y5V_16V_25V_50V_11 - Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2 and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2 - Define global part number - Description of "Halogen Free compliant" added - Test method and procedure updated www.yageo.com Feb 04, 2010 V.2