PROTECTIVE ENCAPSULANT 1010 Thin Film Chip Resistor PRECISION THIN FILM WRAPAROUND TERMINATIONS Standard Grade, Wraparound 99.6% ALUMINA PERFORMANCE CHARACTERISTICS 5.6W- 1.6MW 0.1%, 0.25%, 0.5%,1%, 2%, 5% 25, 50, 100 ppm 35C/W 500 mW 75 Volts CURRENT NOISE POWER DISSIPATION TEMPERATURE RISE (C) Resistance Range(1) Tolerances (2) TCR Thermal Resistance Maximum Power Maximum Voltage (1) Minimum resistance range at 0.1% tolerance is 100ohms. (2) +/- 0.05% limited availability - consult factory ENVIRONMENTAL PERFORMANCE (3) fiber epoxy board ceramic board POWER DISSIPATION (WATTS) 0.02% 0.02% 0.02% 0.02% 0.03% 0.03% See Chart Thermal Shock Low Temperature Operation Short-time Overload Resistance to Bonding Exposure Moisture Resistance High Temperature Exposure Life Test TYPICAL LIFE TEST PERFORMANCE POWER DERATING (3)Typical resistance change, test methods and criteria per MIL-PRF-55342. PART NUMBERING S 1010 C A 1001 F H B - TR PACKAGING CODE: - TR = Tape/Reel - W = Waffle Carrier (Default packaging is Bulk) TERMINATION FINISH: B: Sn60 over nickel barrier W: Gold TEMPERATURE CHARACTERISTIC TCR: E: 25 ppm H: 50 ppm K: 100 ppm TOLERANCE: B: 01% C: 0.25% D: 0.5% F: 1% G: 2% J: 5% RESISTANCE VALUE: Three or Four digits are used, with all leading digits significant. Four digits are used for 1% tolerance or lower; otherwise, three digits are used. The last digit specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values. Example: 5R6 is 5.6 ohms. PRODUCT DESIGNATION: A: Thin film on alumina TERMINATION TYPE: C: Wraparound termination SIZE CODE GRADE: S: Standard Production H: High Reliability (For Screening options, contact the factory) MECHANICAL INCHES Length Width Thickness Top Term Bottom Term Gap Approx. Weight .104 (.102 - .110) .098 (.096 - .104) .017 (.013 - .023) .015 (.010 - .020) .014 (.010 - .020) .076 (.072 - .080) 0.01005 grams MILLIMETERS 2.65 2.50 0.38 0.38 0.36 1.91 .134 MINIMUM RECOMMENDED MOUNTING PADS (INCHES) (2.60 - 2.80) (2.45 - 2.65) (0.33 - 0.58) (0.25 - 0.50) (0.25 - 0.51) (1.81 - 2.01) .104 .070 .032 "Specifications subject to change without notice." STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-1797 Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401 www.resistor.com 02/08/08