M2000 series H2000 series VCXO 5.0V Full/Half size, Thru-hole, HCMOS/TTL Features RoHS Status 3/4 3/4 Frequency from 1 MHz to 175 MHz Start-up time is less than 5ms Applications 3/4 3/4 3/4 xDSL customer premise equipment Cable modems ATM/SONET/SDH Electrical Specifications Parameter Frequency Range Symbol F Condition Min 1 Typ Max 175 Unit MHz Frequency Stability F/F Operating Temperature at 25C 20 25 50 ppm First Year After First Year Aging 3 1 Operating Temperature Supply Voltage T 0 Vcc 4.5 Supply Current Icc Output Levels "0" Level, sinking 16mA "1" Level, sourcing 10mA Rise & Fall Times From 0.4 to (VDD-.4) V (Above 35 MHz) Input Impedance Control voltage Start-up Time Symmetry +70 C 5.0 5.5 V 30 45 0.4 mA VDD-0.4 2.5 15 @ VDD/2 15 4 2 1000 Ts Control Voltage Bandwidth ppm ppm/yr 150 V ns KOhm 5 ms 45/55 % KHz 75 South Street, Hopkinton, MA 01748 * 800-982-5737 * 508-497-6377 * FAX 508-435-5289 * www.valpeyfisher.com * RevA_1007 1 Note M2000 series H2000 series VCXO 5.0V Full/Half size, Thru-hole, HCMOS/TTL Environmental and Mechanical Conditions Parameter Shock Vibration Specification 1000 Gs, 0.35 ms, 1/2 sine wave, 3 shocks in each plane 10-2000 Hz of .06" d.a. or 20 Gs, whichever is less Humidity Resistant to 85 R.H. at 85C Gross Leak Each unit checked in 125C fluorocarbon Fine Leak Mass spectrometer leak rate less than 2 X 10-8 atm, cc/sec of helium Pins Kovar, nickel plated with 60/40 solder coat Bend Test Will withstand two bends of 90 from reference Header Steel, with nickel plate Case Stainless steel, type 304 Marking Printing is black epoxy ink or laser marked Resistance to Solvents MIL STD 202, Method 215 Center Frequency is Between Two Voltages DESCRIPTIONS M2001, H2001 M2002, H2002 M2003, H2003 M2004, H2004 M2005, H2005 M2006, H2006 M2007, H2007 Center Frequency is at 2.5V with 50 ppm stability M2021, H2021 M2022, H2022 M2023, H2023 M2031, H2031 M2032, H2032 Center Frequency is at 2.5V with 25 ppm stability M2033, H2033 175 ppm, min. deviation when using 0.3 to 10V control-voltage 75 ppm, min. deviation when using 0.3 to 4.0V control-voltage 175 ppm to 300 ppm deviation when using 0.3 to 10V control-voltage 125 ppm min. deviation when using 0.3 to 4.0V control-voltage 75 ppm to 300 ppm deviation when using 1.0 to 4.0V control-voltage, for use where the control voltage is 1 volt off both rails 150 ppm, min. deviation when using 0 to 5.0V rail-to-rail control-voltage 125 ppm to 250 ppm deviation when using 0.5 to 4.5V control-voltage 75 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with 50 ppm stability 100 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with 50 ppm stability 150 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with 50 ppm stability 75 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with 25 ppm stability 100 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with 25 ppm stability 150 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with 25 ppm stability 75 South Street, Hopkinton, MA 01748 * 800-982-5737 * 508-497-6377 * FAX 508-435-5289 * www.valpeyfisher.com * RevA_1007 2 M2000 series H2000 series VCXO 5.0V Full/Half size, Thru-hole, HCMOS/TTL Full size (M) Half size (H) Pin 1 Pin 1 Control Voltage Pin 7 Pin 4 Ground & Case Pin 8 Pin 5 Output Pin 14 Pin 8 +5.0V, VDD HOW TO ORDER M - "M" is full size DIL "H" is half size DIL 2 0 0 1 - FREQ. "2001" is model type G Leave blank for straight leads Add "G" for gullwig 75 South Street, Hopkinton, MA 01748 * 800-982-5737 * 508-497-6377 * FAX 508-435-5289 * www.valpeyfisher.com * RevA_1007 3 M2000 series H2000 series VCXO 5.0V Full/Half size, Thru-hole, HCMOS/TTL Frequency Deviation, ppm Frequency Deviation, ppm FREQUENCY VS. CONTROL VOLTAGE FOR TYPICAL DEVICES Control Voltage, Vc Fig. 2 M2001-40M Fig. 6 M2023-19.44 Frequency Deviation, ppm Frequency Deviation, ppm Control Voltage, Vc Control Voltage, Vc Control Voltage, Vc Fig. 4 M2007-16.777216M Fig. 3 M2002-12.352 75 South Street, Hopkinton, MA 01748 * 800-982-5737 * 508-497-6377 * FAX 508-435-5289 * www.valpeyfisher.com * RevA_1007 4