LXMG221W-0700030-D0 30W 700mA Dimmable LED Driver Module (R) TM P RODUCTION D ATASHEET * DESCRIPTION Low voltage dimming control is available when using the dedicated dimming control input leads, DIM(+) and DIM(-). The amplitude of the output LED string current will vary from 10% to 100% corresponding to a 1VDC to 10VDC signal on DIM(+) input following IEC 60929 Annex E.2.3. A minimum dim level of 10% shall be obtained with DIM(+) input shorted to DIM(-). * * * * * * * * * * * * * Energy Star Compliant > 50k Hour Life at 60C Constant Current Output 0 - 10VDC, PWM and POT Dimmable Suitable for Damp Locations IP66 Suitable for Plenum Locations Isolated Output, SELV High efficiency/Cool Running Universal AC Input UL, CUL, and CE Standards E337545 EU ROHS, REACH Compliant Full Protection: OVP, SCP, OTP, Maximum Power Limit Small Compact Size WWW . Microsemi .C OM The LXMG221W-0700030-D0 is a highly reliable 30W solid-state LED lighting driver module with a galvanic isolated output. It is compliant to Energy Star for commercial, industrial and residential applications. It is compatible with 50Hz and 60Hz AC power sources worldwide with standard voltages ranging from 120VAC +/- 10% to 277VAC +/- 10%. The output is a 700mA dimmable constant current source. It complies with UL, CUL and CE standards for safety standards and EMC. KEY FEATURES APPLICATIONS Worldwide Residential and Commercial LED Lighting Fixtures such as: * LED Down Lights PRODUCT HIGHLIGHT ORDER INFORMATION Part Number Input Voltage Output Voltage Range and Full Scale Current (IFS) LXMG221W-0700030-D0 120VAC to 277VAC; 47 to 63Hz 17V to 40V at 700mA Copyright (c) 2011 Rev. 1.0, 2012-04-17 Microsemi Analog Mixed Signal Group One Enterprise, Aliso Viejo, CA. 92656, 800-877-6458, 949-380-6100, Fax: 949-215-4996 Page 1 LXMG221W-0700030-D0 Photo is representative only, actual product may differ LXMG221W-0700030-D0 30W 700mA Dimmable LED Driver Module (R) TM P RODUCTION D ATASHEET ABSOLUTE MAXIMUM RATINGS WWW . Microsemi .C OM AC Input Voltage.....................................................................................................................................................0 to 305VAC DIM(+) (relative to DIM(-)) .................................................................................................................................. -20V to 42.4V DIM(+) Voltage (relative to OUTPUT(-)) ............................................................................................................. -20V to 42.4V Operating Humidity ........................................................................................................................ 5 to 95% (non-condensing) Input Power ........................................................................................................................................ 38W (Internally Limited) Output LED String Current ............................................................................................................. 810mA (Internally Limited) Output String Voltage ...................................................................................................................... 42.4V (Internally Limited) Output Power ...................................................................................................................................... 34W (Internally Limited) Case Storage Temperature Range ................................................................................................................... -40C to 105C Note: Exceeding these ratings could cause damage to the device. Currents are positive into, negative out of specified terminal. LED Output Current (mA) LED Output Current (mA) Typical Temperature Derating Curve 800 700 600 500 400 DIM(+) = 10V DIM(+) = 1V 300 200 100 Typical Supply Voltage Derating Curve 800 700 600 500 400 DIM(+) = 10V DIM(+) = 1V 300 200 100 0 0 30 15 0 15 30 45 60 75 90 90 120 150 180 210 240 270 300 Input Supply Voltage (VAC) Case Temperature (C) TYPICAL OPERATING CONDITIONS Parameter Symbol LED String Output Voltage Range OUT(-) Sink Current OUT(-)ISINK Min At full load current 17 At minimum load Current (Dimmed to 10%) 15 IFS Max 40 700 VDIM(+) VDIM(+)_PWM Typ Open Collector Drive VDIM(+)_DC Units V mA 0.95 10 V 200 1000 Hz 9.5 100 % Microsemi Analog Mixed Signal Group One Enterprise, Aliso Viejo, CA. 92656, 800-877-6458, 949-380-6100, Fax: 949-215-4996 Page 2 LXMG221W-0700030-D0 Linear DIM(+) Control Input Voltage Range DIM(+) Control PWM Frequency Range DIM(+) Control PWM Duty Cycle Range Copyright (c) 2011 Rev. 1.0, 2012-04-17 VOUT(+) Test Conditions / Comment LXMG221W-0700030-D0 (R) TM 30W 700mA Dimmable LED Driver Module P RODUCTION D ATASHEET ELECTRICAL CHARACTERISTICS Parameter Input Voltage Input AC Current Peak Inrush Current Symbol Test Conditions / Comment Min VAC Line Frequency 47Hz to 63Hz 108 IAC 120VAC Input 0.265 IAC 240VAC Input 0.136 IAC 277VAC Input 0.121 IAC Measure at 277VAC Peak AC Line; Prior to first AC zero crossing 12 Measure at 277VAC Peak AC Line; After first AC zero crossing 0.6 Max Units 305 VAC A A Power Factor pf VAC = 120VAC and 277VAC, maximum load 0.9 Efficiency VAC = 120VAC and 277VAC, maximum load, after 30 minutes operation 88 T.H.D. VAC = 120VAC and 277VAC, maximum load Average Sink Current IOUT(-) VAC = 120VAC, 240VAC and 277VAC, full bright Line Regulation IOUT(-) VAC = 120VAC and 277VAC, maximum load Total Harmonic Distortion Typ WWW . Microsemi .C OM The following specifications apply over the recommended operating temperature of -20C to 60C and the full input voltage range. Except where noted, testing is performed at 25C, with 120VAC, 240VAC and 277VAC, VOUT = 37.5 2.5V, IOUT = IFS 5 PF 90 % 10 % 105 %IFS 1 %IFS 5.0 V Output Current Source 95 100 DC Controlled Dimming(Per IEC 60929, Annex E2.1 - 2.3) Dimming Control Voltage VDIM IFS Output Current IOUT(-) Dimming Control Current Maximum Brightness 9.5 Mid (50%) brightness 4.5 Minimum Brightness 0 4.75 1.05 Maximum current; VDIM = 10V 665 700 735 Mid Current ; VDIM = 4.75V 47.5 50 52.5 Minimum current; VDIM = 1V 8 10 12 1.19 1.25 1.37 150 200 mA %IFS ICONT The LED Driver sources DIM current mA Turn-on Time tSTART Cold Start to 90% IFS Turn-off Time tTURNOFF Full on to 10% IFS 100 IOUT(-) Turning Power On 10 %IFS 60 C Start up Operating ambient 1 Cold Start Temperature TAMBIENT Ambient implies air surrounding unit -30 TSTART Minimum cold start up temperature -30 VOUT(+) Relative to VOUT- ; IOUT- = 0 (open circuit); 41 41.2 42.4 VPK Just prior to thermal shutdown. 90 105 110 C C Protection OV threshold 1 Maximum case hot spot TSD The unit will operate continuously at full power in the operating ambient range. With an elevated ambient temperature, the unit will shut down prior to reaching a hot spot case temperature in excess of the specified maximum, when the unit cools approximately 8C it will recover. Copyright (c) 2011 Rev. 1.0, 2012-04-17 Microsemi Analog Mixed Signal Group One Enterprise, Aliso Viejo, CA. 92656, 800-877-6458, 949-380-6100, Fax: 949-215-4996 Page 3 LXMG221W-0700030-D0 Power On Overshoot mS LXMG221W-0700030-D0 30W 700mA Dimmable LED Driver Module (R) TM P RODUCTION D ATASHEET Safety & EMC Compliance UL 8750, UL1310 Class 2 WWW . Microsemi .C OM UL/CUL /CE Safety Canada: CAN/CSA-C22.2 No. 223 Class 2 EN 60598-1&2; 61347-1, EN61347-2-13 FCC Title 47, Part 15, Class B Conducted and Radiated Emission EN 55015; CISPR22 Class B Conducted emission (Mains and Dimming Terminals) EN 61000-3-2 Class C; ANSI C82.77 Power Factor and Harmonic Current Emissions EN 61000-3-3 Voltage Fluctuations and Flicker EN 61547 EN61000-4-2 Electrostatic Discharge Immunity EN61000-4-3 Radiated Susceptibility test EN61000-4-4 Electrical Fast Transient EN61000-4-5 Surge Immunity Test (2kV) EN61000-4-6 Conducted Susceptibility Immunity test EN61000-4-8 Power Frequency Magnetic Field Immunity EN61000-4-11 Voltage Dips and interruption immunity IEC 62384 Performance requirements for AC or DC supplied Control Gear for LED Modules IEEE C.62-41-1991 100kHz, 2kV ring wave per Energy Star (Pending) Energy Star Sound < 24dBA; Class A sound rating per Energy Star (at all DIMMING settings) (Pending) Life Expectancy 50,000 hours @ 100% duty at ambient temperature 60C and max load Environmental Standards EU RoHS, REACH LEAD DESCRIPTION Name Description INPUT TERMINAL LEADS (18AWG plenum rated) AC LINE Main Input Power Supply Line (120VAC to 277VAC) - Brown wire AC NEUTRAL Main Input Power Supply Neutral- Blue wire CONTROL TERMINAL LEADS (22 or 24 AWG plenum rated) DIM(+) Analog Dimming Input - Purple wire DIM(-) Dimming Return - Grey wire OUTPUT(+) LED String Anode Voltage (High Side) - Red wire OUTPUT(-) LED String Cathode Voltage (Low Side) - Yellow wire Copyright (c) 2011 Rev. 1.0, 2012-04-17 Microsemi Analog Mixed Signal Group One Enterprise, Aliso Viejo, CA. 92656, 800-877-6458, 949-380-6100, Fax: 949-215-4996 LXMG221W-0700030-D0 OUTPUT TERMINALS (18AWG plenum rated) Page 4 LXMG221W-0700030-D0 (R) TM 30W 700mA Dimmable LED Driver Module P RODUCTION D ATASHEET CONDITIONS OF ACCEPTABILITY The input and output leads are 18 AWG, rated min. 300V, 105C, VW-1. The suitability of the leads shall be determined in each end-use application. The leads are suitable for field wiring, except for when installed with alternate lead colors below, are suitable for factory wiring only. The polymeric housing is rated V-0 and has been subjected to a ball-impact and mold stress relief tests. The need for a suitable enclosure shall be considered in the end product. The component has been evaluated for dry and damp locations, where the humidity conditioning and dielectric tests were conducted per UL 8750. WWW . Microsemi .C OM The components have been judged on the basis of the required spacings in the Standard for Class 2 Power Units, UL 1310. The maximum temperature measured on housing outside surface was 56C during the Temperature Test when shifted to Ambient Temperature 40C. The temperature test was conducted without potting compound. The necessity for repeating the Temperature Test shall be determined in each end use application. A proper mechanical, electrical and fire enclosure shall be provided in the end-use application that is in compliance with all the applicable requirements of the end-use application. Testing was on a 20 A branch circuit. If used on a branch circuit greater than this, additional testing may be necessary. The LED driver is rated as noted in the Electrical Ratings Table above, and the outputs comply with the requirements for Class 2. The need for additional evaluation shall be considered in the end product if used beyond these ratings. The LED driver is provided with dimmer leads for connecting an external dimmer. The leads colors are shown as below. The dimmer circuit is considered as Class 2 circuit. The routing of the Dimming leads shall be determined in the end use application. Lead Function Color AC LINE BROWN AC NEUTRAL BLUE OUTPUT(+) RED OUTPUT(-) YELLOW DIM(-) GRAY DIM(+) PURPLE LXMG221W-0700030-D0 Copyright (c) 2011 Rev. 1.0, 2012-04-17 Microsemi Analog Mixed Signal Group One Enterprise, Aliso Viejo, CA. 92656, 800-877-6458, 949-380-6100, Fax: 949-215-4996 Page 5 LXMG221W-0700030-D0 30W 700mA Dimmable LED Driver Module (R) TM P RODUCTION D ATASHEET TYPICAL CHARACTERISTIC CHARTS 25C WWW . Microsemi .C OM DIM(+) INPUT vs OUTPUT CURRENT and LED STRING VOLTAGE @ VIN = 240VAC 40 600 500 30 400 300 20 Output Current 200 LED String Voltage 10 100 0 LED String Voltage (V) Output Current (mA) 700 0 0 1 2 3 4 5 6 7 8 9 10 DIM(+)(V) Power Factor vs Output Power 1 Power Factor 0.9 0.8 PF @ 120VAC 0.7 PF @ 240Vac 0.6 PF @ 277Vac 0.5 0 3 6 9 12 15 18 21 24 27 30 Output Power (Watts) Efficiency Vs Output Power 90 Efficiency (%) LXMG221W-0700030-D0 88 86 84 Efficiency @ 120VAC 82 Efficiency @ 240VAC 80 Efficiency @ 277VAC 78 0 3 6 9 12 15 18 21 24 27 30 Output Power (Watts) Copyright (c) 2011 Rev. 1.0, 2012-04-17 Microsemi Analog Mixed Signal Group One Enterprise, Aliso Viejo, CA. 92656, 800-877-6458, 949-380-6100, Fax: 949-215-4996 Page 6 LXMG221W-0700030-D0 TM (R) 30W 700mA Dimmable LED Driver Module P RODUCTION D ATASHEET APPLICATION INFORMATION WWW . Microsemi .C OM MECHANICAL DRAWING 5.5 mm 8.8 mm 3.5 mm R 1.75 mm 29.2 0.3mm 40 mm LXMG221W-0700030-D0 5.50 All dimensions are in millimeters Wire length is 210mm 10mm, stripped 12mm 5mm UL1015 AWG#18 16/30 stranded 105C Input & Output wires; AWG#22 or 24 stranded Control wires, all wires tinned. Please insure the wire nuts are installed correctly to prevent intermittent operation. Connecting the AC input to Control or Output wires will result in damage to the module. Copyright (c) 2011 Rev. 1.0, 2012-04-17 Microsemi Analog Mixed Signal Group One Enterprise, Aliso Viejo, CA. 92656, 800-877-6458, 949-380-6100, Fax: 949-215-4996 Page 7 LXMG221W-0700030-D0 TM (R) 30W 700mA Dimmable LED Driver Module P RODUCTION D ATASHEET NOTES WWW . Microsemi .C OM LXMG221W-0700030-D0 PRODUCTION DATA - Information contained in this document is proprietary to Microsemi and is current as of publication date. This document may not be modified in any way without the express written consent of Microsemi. Product processing does not necessarily include testing of all parameters. Microsemi reserves the right to change the configuration and performance of the product and to discontinue product at any time. Copyright (c) 2011 Rev. 1.0, 2012-04-17 Microsemi Analog Mixed Signal Group One Enterprise, Aliso Viejo, CA. 92656, 800-877-6458, 949-380-6100, Fax: 949-215-4996 Page 8