Bulletin I27502 08/97 MT..KB SERIES THREE PHASE BRIDGE Power Modules Features Package fully compatible with the industry standard INT-A-pak power modules series 130 A 160 A High thermal conductivity package, electrically insulated case Outstanding number of power encapsulated components Excellent power volume ratio, outline for easy connections to power transistor and IGBT modules 4000 VRMS isolating voltage UL E78996 approved Description A range of extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and heavy duty applications. Major Ratings and Characteristics Parameters IO I2t Units 130 (160) 160 (200) A 85 (62) 85 (60) C @ 50Hz 1130 1430 A @ 60Hz 1180 1500 A @ 50Hz 6400 10200 A2s @ 60Hz 5800 9300 A2 s 64000 102000 A2s @ TC IFSM 130MT.KB 160MT.KB I2t VRRM range 800 to 1600 V TSTG range - 40 to 150 C TJ range - 40 to 150 C www.irf.com 1 130-160MT..KB Series Bulletin I27502 08/97 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number 130-160MT..KB Voltage Code V RRM , maximum repetitive peak reverse voltage V VRSM , maximum nonrepetitive peak rev. voltage V 80 800 900 100 1000 1100 120 1200 1300 140 1400 1500 160 1600 1700 I RRM max. @ TJ max. mA 10 Forward Conduction IO Parameter 130MT.KB 160MT.KB Units Conditions Maximum DC output current 130 (160) 160 (200) A 85 (62) 85 (60) C Maximum peak, one-cycle forward, 1130 1430 A non-repetitive surge current 1180 1500 t = 8.3ms reapplied 950 1200 t = 10ms 100% VRRM @ Case temperature IFSM I2 t Maximum I2 t for fusing 120 Rect conduction angle t = 10ms No voltage 1000 1260 64000 10200 5800 9300 t = 8.3ms reapplied 4500 7200 t = 10ms 100% VRRM t = 8.3ms reapplied A2 s t = 8.3ms reapplied t = 10ms No voltage Initial TJ = TJ max. 4100 6600 64000 102000 A2 s VF(TO)1 Low level value of threshold voltage 0.78 0.81 V VF(TO)2 High level value of threshold voltage 0.99 1.04 rf1 Low level value of forward slope resistance 4.59 3.52 rf2 High level value of forward slope resistance 4.17 3.13 VFM Maximum forward voltage drop 1.63 1.49 V Ipk = 200A, TJ = 25C, tp = 400s single junction VINS RMS isolation voltage 4000 4000 V TJ = 25C, all terminal shorted I2t Maximum I2 t for fusing t = 0.1 to 10ms, no voltage reapplied (16.7% x x IF(AV) < I < x IF(AV)), @ TJ max. (I > x IF(AV)), @ T J max. m (16.7% x x IF(AV) < I < x IF(AV)), @ TJ max. (I > x IF(AV)), @ T J max. f = 50Hz, t = 1s Thermal and Mechanical Specifications Parameter 130MT.KB 160MT.KB Units Conditions TJ Max. junction operating temperature range -40 to 150 C Tstg Max. storage temperature range -40 to 150 C RthJC Max. thermal resistance, junction to case 0.16 0.12 0.93 0.73 DC operation per junction 0.18 0.15 120 Rect condunction angle per module 1.08 RthCS Max. thermal resistance, case to heatsink K/W 0.88 DC operation per module 120 Rect condunction angle per junction 0.03 K/W Per module to heatsink 4 to 6 Nm to terminal 3 to 4 A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads. Mounting surface smooth, flat and greased T Mounting torque 10% wt Approximate weight 2 225 g www.irf.com 130-160MT..KB Series Bulletin I27502 08/97 Ordering Information Table Device Code 1 - 16 0 MT 160 1 2 3 4 K B 5 Current rating code: 13 = 130 A (Avg) 16 = 160 A (Avg) 2 - Three phase diodes bridge 3 - Essential part number 4 - Voltage code: Code x 10 = VRRM (See Voltage Ratings Table) 5 - Generation II Outline Table (without optional barriers) D A B C E F All dimensions in millimeters (inches) NOTE: To order the Optional Hardware see Bulletin I27900 www.irf.com 3 130-160MT..KB Series Bulletin I27502 08/97 Outline Table (with optional barriers) D A B C E F 1000 150 130MT..KB Series 140 130 120 120 (Rect) 110 100 90 80 70 60 50 100 TJ = 25C TJ = 150C 10 130MT..KB Series Per Junction 1 0 20 40 60 80 100 120 140 160 180 Total Output Current (A) Fig. 1 - Current Ratings Characteristics 4 Instantaneous Forward Current (A) Maximum Allowable Case Temperature (C) All dimensions in millimeters (inches) 0 1 2 3 4 5 Instantaneous Forward Voltage (V) Fig. 2 - Forward Voltage Drop Characteristics www.irf.com 130-160MT..KB Series Bulletin I27502 08/97 500 K/ W 0.3 K/W ta el -D R Maximum Total Power Loss (W) W K/ 300 05 0. 120 (Rect) 350 K/ W = 0.2 SA 0. 12 400 R th 130MT..KB Series TJ = 150C 450 250 0.5 K/W 0.7 K/W 200 150 1.5 K/W 100 50 0 0 20 40 60 80 100 120 140 160 0 Total Output Current (A) 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial TJ = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 900 800 700 600 500 400 130MT..KB Series 300 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Fig. 3 - Total Power Loss Characteristics 10 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 150C No Voltage Reapplied Rated VRRMReapplied 1100 1000 900 800 700 600 500 400 130MT..KB Series 300 200 0.01 200 1 1200 100 0.1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Pulse Train Duration (s) Fig. 4 - Maximum Non-Repetitive Surge Current Fig. 5 - Maximum Non-Repetitive Surge Current 150 1000 160MT..KB Series 140 Instantaneous Forward Current (A) Maximum Allowable Case Temperature (C) 1 130 120 120 (Rect) 110 100 90 80 70 60 50 100 TJ = 25C TJ = 150C 10 160MT..KB Series Per Junction 1 0 40 80 120 160 200 240 0 1 2 3 4 5 Total Output Current (A) Instantaneous Forward Voltage (V) Fig. 6 - Current Ratings Characteristics Fig. 7 - Forward Voltage Drop Characteristics www.irf.com 5 130-160MT..KB Series Bulletin I27502 08/97 160MT..KB Series TJ = 150C /W 05 0. /W K K/ W ta el -D 120 (Rect) 400 K = 0. 1 0. 15 A hS 500 Rt 0.2 K/ W 0.3 K/W 300 R Maximum Total Power Loss (W) 600 0.5 K/W 200 0.7 K/W 1.5 K/W 100 0 0 40 80 120 160 Total Output Current (A) 200 0 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) 1300 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Fig. 8 - Total Power Loss Characteristics At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial TJ = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 1200 1100 1000 900 800 700 600 500 160MT..KB Series 400 10 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 150C No Voltage Reapplied Rated VRRM Reapplied 1400 1300 1200 1100 1000 900 800 700 600 500 160MT..KB Series 400 300 0.01 300 1 1500 100 0.1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Pulse Train Duration (s) Fig. 9 - Maximum Non-Repetitive Surge Current Transient Thermal Impedance Z thJC (K/W) 1 Fig. 10 - Maximum Non-Repetitive Surge Current 10 Steady State Value RthJC = 0.93 K/W RthJC = 0.73 K/W 1 130MT..KB Series (DC Operation) 160MT..KB Series 0.1 Per Junction 0.01 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 11 - Thermal Impedance ZthJC Characteristic 6 www.irf.com