REV CHANGE Drawn DATE DRN CHK 01/31/16 SJ T 3/16 HEX [4.76] THREAD 4-40 UNC 2B THRU 9/32 [7.14] NOTES: 1. Material : Aluminium 2. Finish : No Plating 3. ASME Y14.5M - 2009 4. All Drawing Dimensions are in Inches [mm] 5. Unless otherwise specified; Edge Breaks, Radii or Countersinks 0.005-0.015 95 Silvermine Rd.,Seymour CT 06483 Tel: 203-888-2133,Fax: 203-888-9860 This Drawing is the Property of RAF. It contains confidential, proprietary information that is RAF property. Do not disclose to or duplicate for others except as authorized by RAF. COMPONENT STANDOFFS TOLERANCES ALL DIMENSIONS ARE INCHES (UNLESS OTHERWISE SPECIFIED) METALLIC 2053T-440-AL LENGTHS </=: 6 INCHES 0.005 LENGTH >: 6 INCHES 0.010 DIAMETERS: 0.005 NON-METALLIC LENGTH: 0.010 DIAMETERS: 0.010 INTERNAL THREADS: MINIMUM THREAD DEPTH 3/16 HEX FEMALE STANDOFFS SCALE 7.00 SHEET 1 of 1