MBR10H100CT, MBRF10H100CT & MBRB10H100CT Series Vishay Semiconductor New Product Dual High-Voltage Schottky Rectifiers Rev. Voltage 90 to 100V Forward Current 10A ITO-220AB (MBRF10H90CT, MBRF10H100CT) 0.188 (4.77) 0.172 (4.36) 0.405 (10.27) 0.383 (9.72) 0.110 (2.80) 0.100 (2.54) TO-220AB (MBR10H90CT, MBR10H100CT) 0.175 (4.44) 0.154 (3.91) 0.370 (9.40) 0.360 (9.14) 0.055 (1.39) 0.045 (1.14) 0.148 (3.74) 0.676 (17.2) 0.646 (16.4) 0.600 (15.5) 0.580 (14.5) 0.113 (2.87) 0.103 (2.62) 0.350 (8.89) 0.330 (8.38) PIN 1 3 2 0.145 (3.68) 0.135 (3.43) 0.410 (10.41) 0.390 (9.91) 1 PIN 2 0.350 (8.89) 0.330 (8.38) 0.635 (16.13) 0.625 (15.87) 3 0.560 (14.22) 0.530 (13.46) PIN 1 0.110 (2.79) 0.100 (2.54) PIN 1 PIN 2 PIN 3 CASE PIN 2 0.560 (14.22) 0.530 (13.46) 0.037 (0.94) 0.027 (0.69) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.022 (0.55) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) Dimensions in inches and (millimeters) 0.035 (0.90) 0.028 (0.70) 0.110 (2.80) 0.100 (2.54) 0.060 (1.52) PIN 3 0.105 (2.67) 0.104 (2.65) 0.096 (2.45) 0.191 (4.85) 0.171 (4.35) 0.603 (15.32) 0.573 (14.55) 1.148 (29.16) 1.118 (28.40) 0.160 (4.06) 0.140 (3.56) 0.095 (2.41) 0.131 (3.39) DIA. 0.122 (3.08) 0.140 (3.56) DIA. 0.130 (3.30) 0.185 (4.70) 0.415 (10.54) MAX. TO-263AB (MBRB10H90CT, MBRB10H100CT) 0.205 (5.20) 0.195 (4.95) 0.42 (10.66) 0.411 (10.45) 0.190 (4.83) 0.380 (9.65) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) 0.245 (6.22) MIN K Mounting Pad Layout TO-263AB 0.33 (8.38) 0.055 (1.40) 0.360 (9.14) 0.047 (1.19) 0.320 (8.13) 0.63 (17.02) 0.624 (15.85) 1 K 2 0.591 (15.00) 0-0.01 (0-0.254) 0.110 (2.79) 0.090 (2.29) 0.037 (0.940) 0.027 (0.686) 0.08 (2.032) 0.24 (6.096) 0.12 (3.05) 0.105 (2.67) 0.095 (2.41) 0.021 (0.53) PIN 1 0.014 (0.36) PIN 2 0.205 (5.20) K - HEATSINK 0.140 (3.56) 0.110 (2.79) 0.195 (4.95) Mechanical Data Features * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Dual rectifier construction, positive center tap * Metal silicon junction, majority carrier conduction * Low power loss, high efficiency * Guardring for overvoltage protection * For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Document Number 88668 24-Apr-03 Case: JEDEC TO-220AB, ITO-220AB & TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250C/10 seconds, 0.25" (6.35mm) from case Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08oz., 2.24g www.vishay.com 1 MBR10H100CT, MBRF10H100CT & MBRB10H100CT Series Vishay Semiconductors formerly General Semiconductor Maximum Ratings (TC = 25C unless otherwise noted) Parameter Symbol MBR10H90CT MBR10H100CT Unit Maximum repetitive peak reverse voltage VRRM 90 100 V Working peak reverse voltage VRWM 90 100 V Maximum DC blocking voltage VDC 90 100 V Maximum average forward rectified current Total device at TC = 105C Per leg IF(AV) 10 5 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg IFSM 150 A Peak repetitive reverse current per leg at tp = 2s, 1KHZ IRRM 0.5 A Voltage rate of change (rated VR) dv/dt 10,000 V/s TJ, TSTG -65 to +175 C Operating junction and storage temperature range (1) 4500 3500 (2) 1500 (3) V Symbol Value Unit 5.0A, TJ = 25C 5.0A, TJ = 125C 10A, TJ = 25C 10A, TJ = 125C VF 0.76 0.61 0.85 0.71 V TJ = 25C TJ = 100C IR 3.5 4.5 A mA RMS Isolation voltage (MBRF type only) from terminals to heatsink with t = 1 second, RH 30% VISOL Electrical Characteristics (TC = 25C unless otherwise noted) Parameter Maximum instantaneous forward voltage per leg(4) at at at at IF = IF = IF = IF = Maximum reverse current per leg at working peak reverse voltage (Note 4) Thermal Characteristics (TC = 25C unless otherwise noted) Parameter Typical thermal resistance per leg Symbol MBR MBRF MBRB RJC 2.2 4.2 2.2 Unit C/W O Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset (2) Clip mounting (on case), where leads do overlap heatsink (3) Screw mounting with 4-40 screw, where washer diameter is 4.9 mm (0.19") (4) Pulse test: 300s pulse width, 1% duty cycle Ordering Information Product Case Package Code Package Option MBR10H90CT, MBR10100CT TO-220AB 45 Anti-Static tube, 50/tube, 2K/carton MBRF10H90CT, MBRF10100CT ITO-220AB 45 Anti-Static tube, 50/tube, 2K/carton MBRB10H90CT, MBRB10100CT TO-263AB 31 45 81 13" reel, 800/reel, 4.8K/carton Anti-Static tube, 50/tube, 2K/carton Anti-Static 13" reel, 800/reel, 4.8K/carton www.vishay.com 2 Document Number 88668 24-Apr-03 MBR10H100CT, MBRF10H100CT & MBRB10H100CT Series Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (T A = 25C unless otherwise noted) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Leg Fig. 1 - Forward Derating Curve Per Leg 175 Peak Forward Surge Current (A) Average Forward Current (A) 6.0 5.0 4.0 3.0 2.0 1.0 150 125 100 75 50 25 0 0 25 50 75 100 125 150 175 1 10 100 Case Temperature (C) Number of Cycles at 60 HZ Fig. 3 - Typical Instantaneous Forward Characteristics Per Leg Fig. 4 - Typical Reverse Characteristics Per Leg 10000 100 TJ = 175C 1000 IR -- Instantaneous Reverse Current (A) IF -- Instantaneous Forward Current (A) TJ = TJ max. 8.3ms Single Half Sine-Wave (JEDEC Method) TJ = 150C 10 1.0 TJ = 125C TJ = 100C 0.1 TJ = 25C 0.1 0.3 0.5 0.7 125C 100 100C 10 1 25C 0.1 TJ = - 40C 0.01 TJ = 150C 0.9 0.01 0 1.1 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 6 - Typical Transient Thermal Impedance Per Leg Fig. 5 - Typical Junction Capacitance Per Leg 100 Transient Thermal Impedance (C/W) Junction Capacitance (pF) 1000 100 10 10 1 0.1 0.1 1 10 Reverse Voltage (V) Document Number 88668 24-Apr-03 100 0.01 0.1 1 10 t -- Pulse Duration (sec.) www.vishay.com 3