MADL-011023-14150T PIN Diode Limiter 10 MHz - 12 GHz Rev. V2 Features Functional Schematic 3 Terminal LPF Broadband Shunt Structure 10 MHz - 12 GHz Broadband Frequency >50 dBm Peak Power Handling >40 dBm CW Power Handling <0.2 dB Insertion Loss 20 dBm Flat Leakage Power Lead-Free 1.5 x 1.2 mm 6-lead TDFN Package RoHS* Compliant and 260oC Reflow Compatible Description N/C 1 6 N/C RFIN 2 5 RFOUT N/C 3 4 N/C The MADL-011023 is a PIN diode limiter assembled in a lead-free 1.5 x 1.2 mm 6-lead TDFN plastic package. This PIN diode limiter provides exceptional low and high signal frequency operation from 10 MHz to 12 GHz. This device is ideally suited for higher frequency and lower flat leakage limiter microwave circuit applications where compact and higher performance surface mount diode assemblies are required. 7 GND Top view Pin Configuration3 Ordering Information1,2 Pin No. Pin Name Description 1 N/C No Connection 2 RFIN RF Input 3 N/C No Connection Part Number Package 4 N/C No Connection MADL-011023-14150T 3000 piece reel 5 RFOUT RF Output MADL-011023-000SMB Sample board 6 N/C No Connection 7 Paddle4 Ground 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 3. MACOM recommends connecting unused package pins to ground. 4. The exposed pad centered on the package bottom must be connected to RF, DC, and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADL-011023-14150T PIN Diode Limiter 10 MHz - 12 GHz Rev. V2 Electrical Specifications: TA = +25C Parameter Test Conditions Units Min. Typ. Max. Insertion Loss P incident = -10 dBm, F = 750 MHz dB -- 0.05 0.10 Return Loss P incident = -10 dBm, F = 750 MHz dB -- 35 -- P1dB Input Compression Power F = 1 GHz dBm -- 8 -- C.W. Incident Power5 F = 1 GHz dBm -- 40 -- Peak Incident Power5 1 s, 1 % duty @ 1 GHz dBm -- 50 -- CW Flat Leakage Power F = 1 GHz dBm -- 20 -- Pulsed Flat Leakage Power 50 dBm, 1 s, 1 % duty @ 1 GHz dBm -- 26 -- Spike Leakage Power 50 dBm, 1 s, 1 % duty @ 1 GHz dBm -- 28 -- Spike Leakage Energy 50 dBm, 1 s, 1 % duty @ 1 GHz ergs -- 0.1 -- Recovery Time (1 dB of Insertion Loss) 50 dBm, 1 s, 1 % duty @ 1 GHz ns -- 100 -- Input 3rd Order Intermodulation Products (IIP3) F1 = 1.000 GHz, F2 = 1.010 GHz @ 0 dBm dBm -- 20 -- 5. Incident power ratings defined with 1.2:1 source VSWR and 1.2:1 max load VSWR. Absolute Maximum Ratings6,7 Parameter Absolute Maximum Peak Incident Power 1 s pulse, 1% duty @ +85C 48 dBm CW Incident Power @ +85C 37 dBm Junction Temperature 175C Operating Temperature -65C to +125C Storage Temperature -65C to +150C 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. MACOM does not recommend sustained operation near these survivability limits. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADL-011023-14150T PIN Diode Limiter 10 MHz - 12 GHz Rev. V2 PCB Layout PCB Schematic C1 C2 RFIN RFOUT L1 Handling Procedures Parts List Part Value Case Style C1, C2 ( DC Blocks ) 100 pF 0402 L1 (DC Return) 27 nH 0402 Please observe the following precautions to avoid damage: Static Sensitivity These devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Lead-Free 1.5 x 1.2 mm 6-Lead TDFN NOTES: 1. REFERENCE JEDEC MO-153-AB FOR ADDITIONAL DIMENSIONAL AND TOLERANCE INFORMATION. 2. ALL DIMENSIONS SHOWN AS INCHES/MM. Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADL-011023-14150T PIN Diode Limiter 10 MHz - 12 GHz Rev. V2 Typical Performance Curves @ +25C Return Loss vs. Frequency Insertion Loss vs. Frequency 0.0 0 -0.1 -10 -0.2 -20 -0.3 -30 -0.4 -40 -0.5 0 2 4 6 8 10 12 -50 0 2 Frequency (GHz) 8 10 12 Flat Leakage Power @ CW and Pulsed Power, RF Pulse Width = 1 s, Duty Cycle = 1% @ 4 GHz 30 30 25 25 20 20 15 15 10 Average Peak Power Average CW Power 5 0 6 Frequency (GHz) Flat Leakage Power @ CW and Pulsed Power, RF Pulse Width = 1 s, Duty Cycle = 1% @ 1 GHz 10 4 Average Peak Power Average CW Power 5 0 10 20 30 40 Input Power (dBm) 50 60 0 0 10 20 30 40 50 Input Power (dBm) 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 60 MADL-011023-14150T PIN Diode Limiter 10 MHz - 12 GHz Rev. V2 Applications Section Schematic of 3 Stage Limiter using MADL-011023-14150T and MADP-011029-14150T F = 1 - 8 GHz, PINC = 47 dBm CW, or 50 dBm, 10 s, 1 % duty cycle C1 C2 RFIN RFOUT D1 D2 L1 D3 Parts List8 Part PN Case Style Description Quantity D1 MADP-011029-14150T ODS-1415 Input PIN Diode 1 D2 MADL-011023-14150T ODS-1415 2nd Stage PIN Diode 1 D3 MADL-011023-14150T ODS-1415 3rd Stage PIN Diode 1 C1, C2 27 pF 0402 DC Block 2 L1 33 nH 0402 DC Return 1 8. Parts list is shown for 1 - 8 GHz operation. Component values can be scaled for various frequency bands. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support