IPSU Series
Industrial Pressure Transducer - Ceramic
The IPSU series is The probe uses asuitable for use in a wide range of industrial applications.
piezo-resistive sens , within a stainless steel housingceramic or giving excellent media compatibility
The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving
stable electronics for ., especially industrial applications
Each device is temperature compensated, calibrated and supplied with a traceable serial number
and calibration certificate.
Accuracy < 0. % FS BFSL
±
25
Pressure ranges from vacuum to +5800psi
(Custom ranges available on request)
Piezo-resistive thick film ceramic sensor
Stainless steel body
Various outputs including mV, Volts and mA.
Performance
Accuracy (Non-Linearity <±0. % / FS (BFSL)& Hysteresis) 25
Setting Errors (offsets) 2-wire Zero & Full Scale, <±0.5% / FS
3-wire Zero & Full Scale, <±0.5% / FS
4-wire Zero & Full Scale, <±0.5% / FS
@ 10 Volts
Electrical Protection
Supply reverse polarity No damage/no function
Electromagnetic compatibility CE Compliant
Mechanical Stability
Shock 100g / 11s
Vibration 10g RMS (20 - 2000Hz)
Temperatures & Thermal Effects
Media 4Temperature - 0ºC to +135ºC
Ambient Temperature -20ºC to +80ºC
Storage temperature - 0ºC to +125ºC4
Compensated temperature range +20ºC to +80ºC
Thermal Zero Shift (TZS) <±0.04% /FS/ºC
Thermal Span Shift <±0.015% /ºC
Material Specifications
Housing Stainless Steel303
“O” ring seals Viton
Diaphragm Ceramic Al O 96%
23
Media wetted parts Housing & connection, “O” ring seal,
diaphragm
Weight Approx 100g3.5oz ( )
Installation position Any
Operational Life > 100x 10 cycles
6
Insulation resistance > 50MOhms at 50Vdc
Pressure Ranges and Passive mV/V Outputs
Nominal Pressure, Gauge, 1 0 50 1 00 0 00psi 15 30 75 50 30 7 5 375 60
Compound range psi -15 to 0 -15 to 30 -15 to 75 -15 to 1235 -15 to 285 -15 to 360
Permissible Overpressure 1 0 0 0 1 00 00 00 0psi 30 60 5 30 60 5 30 60 975
Burst Pressure 5 50 1 0 50 500 0psi 60 7 180 375 7 80 37 7 975
www.cynergy3.com
© 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO
9001
CERTIFIED
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
T
Telephone +44 (0) 1202 897969
Email:sales@cynergy3.com
Output Signals and Supply Voltages
Wire system Output Supply Voltage Connection sPin No
2-wire 4-20mA 9-32Vdc +ve Supply -ve Supply GroundPin 1 Pin 2 Earth Pin
3-wire 0-5Vdc -32Vdc +ve Supply -ve Supply9 Pin 1 Pin 2
+ve Output GroundPin 3 Earth Pin
4-wire (amplified) +ve Supply -ve Supply10mV/V (ratiometric) 3-12Vdc Pin 1 Pin 2
+ve Output -ve OutputPin 3 Earth Pin