Cutler-Hammer Molded Case Circuit Breakers 70 - 250 Amperes January 2001 12-33 Vol. 1, Ref. No. 10499) J-Frame Product Selection Table 12-56. Types JD, HJD and JDC Thermal-Magnetic Circuit Breakers with Interchangeable Trip Units Max. Cont. Amp Rating @40C Standard Interrupting Capacity 600V AC Rated 35 kAIC @ 480V AC High Interrupting Capacity 600V AC Rated 65 kAIC @ 480V AC Ultra High Interrupting Capacity Current Limiting 600V AC Rated 1 00 kAIC @ 480V AC Thermal Magnetic Trip Unit Only <i! Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals @ Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals '*' Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals <i' Catalog Number Price U.S.S Catalog Number Price U.S.S Catalog Number Price U.S.S Catalog Number Price U.S.S JD2070 JD2090 JD2100 JD2125 JD2150 JD2175 JD2200 JD2225 JD2250 2,160.00 2,160.00 2,160.00 2,160.00 2,160.00 2,160.00 2,160.00 2,160.00 2,325.00 HJD2070 HJD2090 HJD2100 HJD2125 HJD2150 HJD2175 HJD2200 HJD2225 HJD2250 3,200.00 3,200.00 3,200.00 3,200.00 3,200.00 3,200.00 3,200.00 3,200.00 4,460.00 JDC2070 JDC2090 JDC2100 JDC2125 JDC2150 JDC2175 JDC2200 JDC2225 JDC2250 3,975.00 3,975.00 3,975.00 3,975.00 3,975.00 3,975.00 3,975.00 3,975.00 5,210.00 JT2070T JT2090T JT2100T JT2125T JT2150T JT2175T JT2200T JT2225T JT2250T 449.00 TA250KB V 449.00 449.00 449.00 449.00 449.00 449.00 449.00 1,435.00 22.40 JD3070 JD3090 JD3100 JD3125 JD3150 JD3175 JD3200 JD3225 JD3250 2,605.00 2,605.00 2,605.00 2,605.00 2,605.00 2,605.00 2,605.00 2,605.00 2,805.00 HJD3070 HJD3090 HJD3100 HJD3125 HJD3150 HJD3175 HJD3200 HJD3225 HJD3250 3,770.00 3,770.00 3,770.00 3,770.00 3,770.00 3,770.00 3,770.00 3,770.00 4,915.00 JDC3070 JDC3090 JDC3100 JDC3125 JDC3150 JDC3175 JDC3200 JDC3225 JDC3250 4,915.00 4,915.00 4,915.00 4,915.00 4,915.00 4,915.00 4,915.00 4,915.00 6,040.00 JT3070T JT3090T JT3100T JT3125T JT3150T JT3175T JT3200T JT3225T JT3250T 595.00 TA250KB ft 595.00 595.00 595.00 595.00 , 595.00 595.00 595.00 1,710.00 22.40 JD4125 JD4150 JD4175 JD4200 JD4225 JD4250 3,310.00 3,310.00 3,310.00 3,310.00 3,310.00 4,420.00 HJD4125 HJD4150 HJD4175 HJD4200 HJD4225 HJD4250 5,550.00 5,550.00 5,550.00 5,550.00 5,550.00 6,830.00 JDC4125 JDC4150 JDC4175 JDC4200 JDC4225 JDC4250 7,280.00 7,280.00 7,280.00 7,280.00 7,280.00 8,560.00 JT3125T JT3150T JT3175T JT3200T JT3225T JT3250T 595.00 TA250KB i 595.00 595.00 595.00 595.00 1,710.00 22.40 Standard Terminals Only For Use with Stan dard or High or Ultra High Interrupting Frameis See Page 12-35 for Optional Terminals Catalog Number Price U.S.S 2-Pole 70 90 100 125 150 175 200 225 250 3-Pole 70 90 100 125 150 175 200 225 250 4-Pole1> 125 150 175 200 225 250 (c) (R) (R) (R) Individually packed. Fully rated neutral pole with no protection. Neutral is in right pole. Magnetic trip adjustable 5 - 1 0 times continuous ampere rating. Table 12-57. Types JD, HJD and JDC Thermal-Magnetic Circuit Breakers -- Frame Only Standard Interrupting Capacity 600V AC Rated 35 kAIC @ 480V AC High Interrupting Capacity 600V AC Rated 65 kAIC @ 480V AC Ultra High Interrupting Capacity Current Limiting 600V AC Rated 1 00 kAIC @ 480V AC Catalog Number Catalog Number Catalog Number Price U.S.S Price U.S.S Price U.S.S 2-Pole JD2250F 805.00 HJD2250F 2,655.00 JDC2250F 3,395.00 950.00 HJD3250F 3,040.00 JDC3250F 4,170.00 2,530.00 HJD4250F 4,940.00 JDC4250F 6,672.00 3-Pole JD3250F 4-Pole JD4250F Note: Instruction Leaflet/FRED Number 29C104 for Breaker; 29C603 for Thermal Magnetic Trip Unit Discount Symbol. CAT.200.01.T.E For more information contact Cutler-Hammer at: www.ch.cutler-hammer.com/catalog CB-2 F.T'N 12-2 Product Line Overview January 2001 Vol. 1, Ref. No. [0468] Product Line Description Cutler-Hammer Molded Case Circuit Breakers are designed to provide circuit protection for low voltage distribution systems. They are described by NEMA as, ". . . a device for closing and interrupting a circuit between separable contacts under both normal and abnormal conditions," and furthermore as, ". . . a breaker assembled as an integral unit in a supporting and enclosing housing of insulating material." The NEC describes them as, "A device designed to open and close a circuit by non-automatic means, and to open the circuit automatically on a predetermined overload of current, without injury to itself when properly applied within its rating." 12 So designed, Cutler-Hammer circuit breakers protect conductors against overloads and conductors and connected apparatus, such as motors and motor starters, against short circuits. In low voltage distribution systems, there are many varied applications of molded case circuit breakers. Cutler-Hammer offers the most comprehensive family of molded case circuit breakers in the industry. This family of circuit breakers includes: Thermal Magnetic Trip Breakers Electronic rms Trip Breakers Molded Case Switches Motor Circuit Protectors Current Limiting Breakers Special Application Breakers World Breakers Special Calibration All circuit breaker cases are molded from glass-polyester which does not support the growth of fungus. Any parts which are susceptible to the growth of fungus will require special treatment. 20% Adder 50C Calibration Add suffix V to Catalog Number for complete breaker, listed above, when ordering listed ampere ratings for breakers to be used in 50C ambients. Standards and Certifications Molded case circuit breakers are designed to conform with the following standards: Suffix J01 Fungus Treated $325. + 20% Adder Freeze-Tested Circuit Breakers The circuit breakers may be ordered with freeze testing. This option uses special lubrication and mechanical operation is verified at -40C. Suffix F01 Freeze Tested 20% Adder Marine Applications F-Frame circuit breakers can be supplied to meet the following marine specifications: U.S. Coast Guard CFR 46 ABS -- American Bureau of Shipping IEEE 45 These specifications generally require molded case circuit breakers to be supplied with 50C ambient calibration, special nameplating, and plug-in adapter kits. When plug-in adapter kits are used, no terminals need be supplied. Circuit breakers can also be supplied to meet UL489 Supplement SA (Marine Use) and UL489 Supplement SB (Naval Use). UL489 Supplement SA applies to vessels over 65 feet in length. Requirements include 40C ambient calibration, special labeling, and no use of aluminum conductors or terminals. Suffix H08 "Marine" Special non-UL-listed calibrations are available for certain ambient temperatures other than 40C and for frequencies other than 50/60 Hz or DC. Reduced interrupting ratings will apply for 400 Hz applications. Maximum thermal calibration is limited to 135A at 400 Hz. Suffix H01 400 Hz Moisture-Fungus Treatment 10% Adder UL 489 Supplement SB requires 50C ambient calibration, vibration testings, special nameplating and no use of aluminum conductors or terminals. Suffix H09 "Naval" 10% Adder Underwriters Laboratories, Inc., Standard UL489, Molded Case Circuit Breakers and Circuit Breaker Enclosures National Electrical Manufacturers Association Standards Publication No. AB1-1993, Molded Case Circuit Breakers Australian Standard AS 2184, Molded Case Circuit Breakers British Standards Institution Standard BS 4752: Part 1, Switchgear and Control Gear Part 1: Circuit Breakers Canadian Standards Association Standard C22.2 No. 5, Service Entrance and Branch Circuit Breakers International Electrotechnical Commission Recommendations IEC 157-1, Circuit Breakers Japanese T-Mark Standard Molded Case Circuit Breakers South African Bureau of Standards, Standard SABS 156, Standard Specification for Molded Case Circuit Breakers Swiss Electro-Technical Association Standard SEV 157-1, Safety Regulations for Circuit Breakers Union Technique de l'Electricite Standard NF C 63-120, Low Voltage Switchgear and Control Gear Circuit Breaker Requirements Verband Deutscher Elektrotechniker (Association of German Electrical Engineers) Standard VDE 0660, Low Voltage Switchgear and Control Gear, Circuit Breakers Conformance with these standards satisfies most local and international codes, assuming user acceptability and simplified application. Molded case circuit breakers equal or exceed Federal Specification Classification W-C-375b requirements for the particular class associated with the circuit breaker frame being considered. Note: For further information, see Circuit Breaker, CD-ROM SA.74A.01.T.E. For more information contact Cutler-Hammer at: www.ch.cutler-hammer.com/catalog CAT.200.01.T.E Cutler-Hammer Molded Case Circuit Breakers 70 - 250 Amperes January 2001 12-31 Vol. 1, Ref. No. [0497] J-Frame J-Frame Contents Description Page Product Description . . . . . . . . Technical Data and Specifications . . . . . . . . 12-31 Dimensions/Weights . . . . . . . Product Selection . . . . . . . . . . 12-32 12-32 Product Description * All J-Frame Circuit Breakers are HACR rated. * J-Frame circuit breakers are available as individual components (Frame, Trip Unit, Terminals), or factory assembled complete breakers. J-Frame circuit breakers with noninterchangeable trip units are suitable for reverse feed use. 12-31 Typical J-Frame Circuit Breaker Technical Data and Specifications Table 12-50. UL489 Interrupting Capacity Ratings Circuit Breaker Type Number of Poles JOB JD 2,3 2,3,4 2,3,4 2,3,4 HJD JDC , I, x' '* Interrupting Capacity (Symmetrical Amperes) (kA) Volts AC (50/60 Hz) Volts DC 240 480 600 65 65 100 200 35 35 65 100 18 18 25 35 125 -- 250 '>? 500(R) 10 10 -- 22 22 (c) 2-pole circuit breaker or two outside poles of 3-pole circuit breaker. @ Time constant is 3 milliseconds minimum at 10 kA and 8 milliseconds minimum at 22 kA. (R) 8 milliseconds time constant. Table 12-51. IEC157-1 (PI) Interrupting Capacity Ratings Circuit Breaker Type Number of Poles JD HJD JDC 2,3,4 2,3,4 2,3,4 Interrupting Capacity (Symmetrical Amperes) (kA) Volts AC (50/60 Hz) Volts DC 240 380 415 65 35 65 100 35 100 200 65 100 600 125 250 (R)t -- -- 10 22 22 (R) 2-pole circuit breaker or two outside poles of 3-pole circuit breaker. (R) Time constant is 3 milliseconds minimum at 10 kA and 8 milliseconds minimum at 22 kA. -*M<S- . <?k. * ~t y CAT.200.01.T.E For more information contact Cutler-Hammer at: www.ch.cutler-hammer.com/catalog E:T*M Cutler-Hammer Molded Case Circuit Breakers 70 - 250 Amperes 12-32 January 2001 Vol. 1, Ref. No. [0498] J-Frame Dimensions/Weights Table 12-52. Dimensions in Inches (mm) Number of Poles Width Height 2,3 4.125(105) 5.5(140) 10 (255) 10 (254) 4 | Depth 4.063 (103) 4.063(103) Table 12-53. Approximate Shipping Weight in Lbs. (Kg) Breaker Type Complete Breaker Frame Only Trip Unit Number of Poles 3 2 4 2 3 4 2 3 4 JOB JD 11.25(5.103) 11.25(5.103) 12.5 (5.670) 12.5(5.670) 13.25(6.010) 9 (4.082) 10(4.536) 10.5 (4.763) 2 (.907) 2 (.907) 2.25(1.021) HJD JDC 11.25(5.103) 12.25(5.557) 12.5 (5.670) 13.5(6.124) 13.25(6.010) 14.25 (6.470) 9 (4.082) 10 (4.536) 10 (4.536) 11 (4.990) 10.5(4.763) 11.5(5.217) 2 (.907) 2 (.907) 2 (.907) 2 (.907) 2.25(1.021) 2.25(1.021) Product Selection This information is presented only as an aid to understanding Catalog Numbers. It is not to be used to build Catalog Numbers for circuit breakers or trip units. Table 12-54. Circuit Breaker/Frame Catalog Numbering System Circuit Breaker/ Frame Ampere Rating Suffix C F K V W X Y = Non-aluminum Terminals = Frame Only = High Magnetic Molded Case Switch = 50C Calibration = Without Terminals = Load Side Terminals Only = Line Side Terminals Only Table 12-55. Trip Unit Catalog Numbering System JT 3 250 T T ._ Trip Unit Type _, ... . Number of Poles 2 = 2 Poles 3 = 3 Poles 4 = 4 Poles Trip Unit Rating/ Plug Ampere Rating 070 090 100 125 150 175 200 225 Suffix T = Trip Unit Thermal-Magnetic Fixed Thermal Adj. Magnetic V = 50C Calibration (Thermal-Magnetic Trip Units Only) 250 E:T*N For more information contact Cutler-Hammer at: www.ch.cutler-hammer.com/catalog CAT.200.01.T.E