BY500-100 thru BY500-800 Vishay General Semiconductor Soft Recovery Fast-Switching Plastic Rectifier FEATURES * Fast switching for high efficiency * Low forward voltage drop * Low leakage current * High forward surge capability * Solder dip 260 C, 40 s * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC DO-201AD TYPICAL APPLICATIONS For use in medium frequency rectification of switching mode power supplies, inverters, converters, TV sanning, Ultrasonic-system, speed controlled DC motors, low RF interference and freewheeling diode circuit. (Note: These devices are not Q101 qualified.) PRIMARY CHARACTERISTICS IF(AV) 5.0 A VRRM 100 V to 800 V IFSM 200 A trr 200 ns IR 10 A VF 1.35 V TJ max. 125 C MECHANICAL DATA Case: DO-201AD, molded epoxy body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL BY500-100 BY500-200 BY500-400 BY500-600 BY500-800 UNIT Maximum repetitive peak reverse voltage VRRM 100 200 400 600 800 V Maximum RMS voltage VRMS 70 140 280 420 560 V Maximum DC blocking voltage VDC 100 200 400 600 800 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TL = 45 C IF(AV) 5.0 A Peak forward surge current 10ms single half sine-wave superimposed on rated load at TA = 25 C IFSM 200 A Maximum repetitive peak forward surge IFRM 10 A TJ - 50 to + 125 C TSTG - 50 to + 150 C Operating junction temperature range Storage temperature range Document Number: 88544 Revision: 10-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 BY500-100 thru BY500-800 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage SYMBOL 5.0 A Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance 4.0 V, 1 MHz BY500-400 BY500-600 BY500-800 UNIT 1.35 V IR 10 1.0 A mA trr 200 ns IRM(REC) 2.0 A CJ 28 pF Maximum reverse recovery time (1) IF = 1.0 A, VR = 30 V, dI/dt = 50 A/s, Irr = 10 % IRM BY500-200 VF TA= 25 C TA= 100 C Maximum reverse recovery current BY500-100 THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance (1) BY500-100 BY500-200 BY500-400 RJA BY500-600 BY500-800 22 UNIT C/W Note: (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length with both leads to heat sink ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE BY500-400-E3/54 1.1 54 1400 13" diameter paper tape and reel BY500-400-E3/73 1.1 73 1000 Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 1000 0.375" (9.5 mm) Lead Length TL = Lead Temperature 5.0 0.8 x 0.8 x 0.04" (20 x 20 x 1 mm) Copper Heatsinks 4.0 TA = Ambient Temperature 3.0 Resistive or Inductive Load 2.0 P.C.B. Mounted on 0.2 x 0.2" (5.5 mm) Copper Pads 0.375" (9.5 mm) Lead Length 1.0 0 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 6.0 Non-Repetitive 100 Repetitive TA = 25 C 10 ms Single Half Sine-Wave At Rated Load 10 0 20 40 60 80 100 120 140 1 100 10 Temperature (C) Number of Cycles at 50 Hz Figure 1. Forward Current Derating Curves Figure 2. Maximum Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88544 Revision: 10-Apr-08 BY500-100 thru BY500-800 Vishay General Semiconductor 100 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 1 TJ = 25 C Pulse Width = 300 s 1 % Duty Cycle 0.1 0.01 0.4 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 10 5 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1 2.0 100 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance Instantaneous Reverse Current (A) 10 TJ = 100 C 1 TJ = 50 C 0.1 TJ = 25 C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-201AD 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) DIA. Document Number: 88544 Revision: 10-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1