1Description
Master with antenna for the WIN signal tower
wireless system
PSD-S WIN MA/UL
© PHOENIX CONTACT
Data sheet
The WIN (Wireless Information Network) wireless system is
an inexpensive, wireless-based machine data acquisition
system (MDA system).
It enables wireless transmission of signal statuses from sev-
eral signal towers and therefore central monitoring on the PC
of up to 50 different machines.
A master as receiving unit, at least one slave as wireless ele-
ment and software for displaying and evaluating the signal
statuses make up the wireless system.
The following is included in scope of supply:
– One master with antenna including accessories
–One USB cable
– Software CD with WIN software
The master is the receiving unit for the signals that are trans-
mitted by the slave.
The master is connected to the USB connection of a PC. You
can therefore display and evaluate received signal statuses
with the WIN software on the PC and store them in a data-
base.
WIN master features
– Use of the 915MHz frequency band
– Can operated parallel to other wireless applications
(e.g., WLAN, Bluetooth)
– Simultaneous detection of up to 50wireless elements
(slaves)
WIN software features
– License-free software for wireless monitoring of the ma-
chine park on the PC at a glance
– Scope of functions: monitoring of system statuses, trou-
bleshooting, wireless path diagnostics, productivity anal-
ysis for increasing machine efficiency and availability,
storing in a database
– Easy installation
– No programming knowledge required
– Error messages from the software can be sent via e-mail
NOTE:
This version of WIN is only approved for use in North America.
NOTE:
Do not use the WIN system for safety-related applications!
Make sure you always use the latest documentation.
It can be downloaded from the product at www.phoenixcontact.net/products.
8642_en_00 2013-02-04
PSD-S WIN MA/UL
8642_en_00 PHOENIX CONTACT 2
2Table of contents
1 Description .............................................................................................................................. 1
2 Table of contents ..................................................................................................................... 2
3 Ordering data .......................................................................................................................... 2
4 Technical data ......................................................................................................................... 3
5 Scope of supply....................................................................................................................... 4
6 Use limitation ........................................................................................................................... 5
6.1 FCC approval ..................................................................................................................... 5
6.2 IC approval ........................................................................................................................ 5
7 Safety notes............................................................................................................................. 5
8 Mounting the master................................................................................................................ 6
9 Master supply voltage.............................................................................................................. 6
10 Diagnostics.............................................................................................................................. 6
11 WIN software........................................................................................................................... 6
Description Type Order No. Pcs. / Pkt.
Master with antenna for the WIN signal tower wireless system, with USB in-
terface, voltage supply via USB interface, software CD, USB cable (3m),
four rubber feet and material for wall mounting of the master
PSD-S WIN MA/UL 2701664 1
3Ordering data
Additional product required Type Order No. Pcs. / Pkt.
Slave with C-UL-US approval for creating or extending the WIN signal
tower wireless system, 24VAC/DC, black
PSD-S WIN SL/UL 2701565 1
Set comprises Type Order No. Pcs. / Pkt.
Set with C-UL-US approval for the WIN signal tower wireless system, con-
sisting of one master with antenna, three slaves, software CD, USB cable
(3m), four rubber feet, and mounting material for wall mounting the master
PSD-S WIN SET-1MA-3SL/UL 2701563 1
Starter kit with C-UL-US approval for the WIN signal tower wireless system,
consisting of one master with antenna, three slaves, nine LED permanent
light elements (red, yellow, green), three connection elements, three
mounting feet with integrated tube, software CD, USB cable (3m), four rub-
ber feet, and mounting material for wall mounting the master
PSD-S WIN STARTERKIT/UL 2701564 1
Documentation Type Order No. Pcs. / Pkt.
User manual, German, wireless system for signal towers, only approved for
use in North America!
UM DE PSD-S WIN/UL - -
User manual, English, wireless system for signal towers, only approved for
use in North America!
UM EN PSD-S WIN/UL - -
User manual, French, wireless system for signal towers, only approved for
use in North America!
UM FR PSD-S WIN/UL - -
PSD-S WIN MA/UL
8642_en_00 PHOENIX CONTACT 3
4 Technical data
Dimensions (in mm)
Width 77 mm
Height 188 mm
Depth 117 mm
Note on dimensions Height and depth when antenna is perpendicular
34
117
77
17
3,5
15
80
42
30,5
188
General data
Material Acrylonitrile butadiene styrene (ABS)
Color black
Weight 106 g
Ambient temperature (operation) -20 °C ... 50 °C
Degree of protection IP20
Diagnostics / Message Wireless connection / LED
Electrical data of the master
Interfaces USB
Operating voltage 5 V DC (USB; only use USB cables with a maximum length of 3m.)
Inrush current 100 mA
Current consumption max. 100 mA
Wireless interface
Modulation type 2 FSK
Frequency range 913 Hz ... 917 Hz
Frequency band 915 MHz ISM band
Transmission power 10 dBm (at 50 Ohm)
Range 300 m, maximum
Transmission speed 38.4 kbps (can be adjusted via WIN software) , 76.8 kbps (default)
Wireless modules that can be connected Up to 50 (2701565 PSD-S WIN SL/UL)
PSD-S WIN MA/UL
8642_en_00 PHOENIX CONTACT 4
5 Scope of supply
Figure 1 Elements within the scope of supply
Key:
1Master
2USB cable
3CD with WIN software
4Fixing element 1 (screw to master; two screws included)
5Fixing element 2 (screw to the wall)
6Rubber feet
Approvals / conformities
Conforms with guidelines: FCC Part 15.249/IC: RSS-210 Issue 8, RSS-GEN Issue 4, RSS-102 Issue 4
For the latest approvals, please visit www.phoenixcontact.net/products.
Wireless licences
Country ID USA , Canada
PSD-S WIN MA/UL
8642_en_00 PHOENIX CONTACT 5
6Use limitation
6.1 FCC approval
FCC = Federal Communications Commission
This device complies with Part15 of the FCC regulations.
Operation is subject to the following two requirements:
1. This device may not cause harmful disturbances.
2. This device must withstand all disturbances received, in-
cluding disturbances which could lead to unintentional
operation.
Normally, the following FCC warning applies:
The user's permission to operate the equipment could be de-
clared void by making any changes or modifications to this
unit which are not expressly approved by the party responsi-
ble for compliance.
Contains: transmitter module FCC ID: ZGHWIN1
6.2 IC approval
This device complies with the RSS rule(s) of Industry Canada.
Operation is subject to the following two requirements:
1. This device may not cause harmful disturbances.
2. This device must withstand all disturbances received, in-
cluding disturbances which could lead to unintentional
operation.
Contains: transmitter module IC: 9619A-WIN1
7Safety notes
– Do not use the system for safety-related applications.
– Also please observe the documentation on the individual
elements of the signal tower (data sheets, package in-
serts) and the user manual regarding the wireless system
for signal towers.
– Use only with 24 V signal towers.
– Only a qualified electrician can connect the system.
– Only use power supply units with safe isolation and PELV
voltage (protection class2).
– This device does not replace personal protective equip-
ment (e.g.,protective goggles, foot protection, etc.).
– This system cannot eliminate the need for or replace pro-
tective machine equipment, a safety circuit, a protective
device, a safety regulation or supervision.
– Test this device and all protective machine equipment
and safety devices at the start of each shift to ensure that
it is functioning correctly.
– Always take the machines out of operation when replac-
ing worn parts.
– When guards are removed, always implement the “OS-
HA lock-out/tag-out” regulations.
NOTE:
This version of WIN is only approved for use in
North America.
CAUTION:
Observe the following safety notes when using
the WIN wireless system!
PSD-S WIN MA/UL
8642_en_00 6
PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany
www.phoenixcontact.com
8 Mounting the master
You can mount the master either on the wall or position it next
to the PC.
If you do not mount the master on the wall, stick the four rub-
ber feet provided to the four corners on the underside of the
master. They serve to protect against scratching and slipping.
If you mount the master on the wall, proceed as follows.
Figure 2 Mounting the master on the wall
•Screw the fixing element 1 to the master (fig. A). Use the
screws supplied.
•Screw the fixing element 2 to the wall (fig. B). The screws
are not supplied.
•Snap the master with fixing element 1 into fixing element
2 (fig. C).
9 Master supply voltage
The WIN master is supplied with voltage from the PC con-
nected to it via the USB connection of the PC.
10 Diagnostics
The status of the wireless connection is indicated by the LED
band that surrounds the master.
11 WIN software
The ideal wireless connection is achieved
when as few objects as possible influence the
WIN master and WIN slave.
B
C
A
Meaning Red LED Green LED
No wireless connection to the WIN
slave
X-
Wireless connection to at least
one WIN slave
-X
Please obtain information on the WIN software
from the corresponding User Manual.
