Bulletin No
L01 EB0
(Jan,2001)
Light Emitting Diodes
LED
How to Order
Specify a multiple of the standard minimum package quantity when placing an order (100 diodes/package).
For the ordering quantity of taped products, see pages 61 to 63.
When ordering taped products, add a taping number (TP[ ]) to the end of the product number. (See pages
61 to 63.)
●The information in this publication has been carefully checked and is believed to be accurate; how-
ever, no responsibility is assumed for inaccuracies.
●Sanken reserves the right to make changes without further notice to any products herein in the inter-
est of improvements in the performance, reliability, or manufacturability of its products. Before plac-
ing an order, Sanken advises its customers to obtain the latest version of the relevant information to
verify that the information being relied upon is current.
●Application and operation examples described in this catalog are quoted for the sole purpose of refer-
ence for the use of the products herein and Sanken can assume no responsibility for any infringement
of industrial property rights, intellectual property rights or any other rights of Sanken or any third
party which may result from its use.
●When using the products herein, the applicability and suitability of such products for the intended
purpose or object shall be reviewed at the users’responsibility.
●Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of
failure and defect of semiconductor products at a certain rate is inevitable. Users of Sanken products
are requested to take, at their own risk, preventative measures including safety design of the equip-
ment or systems against any possible injury, death, fires or damages to the society due to device
failure or malfunction.
●Sanken products listed in this catalog are designed and intended for the use as components in gen-
eral purpose electronic equipment or apparatus (home appliances, office equipment, telecommunica-
tion equipment, measuring equipment, etc.). Before placing an order, the user’s written consent to the
specifications is requested.
When considering the use of Sanken products in the applications where higher reliability is required
(transportation equipment and its control systems, traffic signal control systems or equipment, fire/
crime alarm systems, various safety devices, etc.), please contact your nearest Sanken sales repre-
sentative to discuss and obtain written confirmation of your specifications.
The use of Sanken products without the written consent of Sanken in the applications where ex-
tremely high reliability is required (aerospace equipment, nuclear power control systems, life support
systems, etc.) is strictly prohibited.
●Anti radioactive ray desigh is not considered for the products listed herein.
●This publication shall not be reproduced in whole or in part without prior written approval from
Sanken.
●Gallium arsenide is used in some of the products listed in this publication. These products are dan-
gerous if they are bur ned or smashed in the process of disposal. It is also dangerous to drink the
liquid or inhale the gas generated by such products when chemically disposed.
CAUTION/WARNING
1
Contents
■Product Designation............................................................... 2
■Selection Guide...................................................................... 4
■Product Index by Part Number............................................... 6
■Application Notes ................................................................... 8
■5
φ
Round Standard LED (With Stopper).............................. 10
SEL1010 Series
■5
φ
Round Standard LED ...................................................... 11
SEL1010M Series
■5
φ
Round Wide-directivity LED ............................................ 12
SEL1010XM Series
■5
φ
Round Narrow-directivity LED (Direct Mount) ................. 13
SEL1050M Series
■5
φ
Round Narrow-directivity LED......................................... 14
SEL1015 Series
■5
φ
Cylindrical LED................................................................ 15
SEL1011 Series
■4.6×5.6
φ
Egg-shaped LED................................................... 16
SEL1053M Series
■4
φ
Round Standard LED ...................................................... 17
SEL4010 Series
■4
φ
Round Wide-directivity LED (Direct Mount) .................... 18
SEL4014 Series
■3
φ
Round LED (Direct Mount).............................................. 19
SEL6010 Series
■3
φ
Round Wide-directivity LED (Direct Mount) .................... 20
SEL6014 Series
■3
φ
Round Narrow-directivity LED (Direct Mount) ................. 21
SEL6015 Series
■3
φ
Round Standard LED ...................................................... 22
SEL2010 Series
■3
φ
Round Narrow-directivity LED......................................... 23
SEL2015 Series
■3
φ
Cylindrical LED................................................................ 24
SEL2011 Series
■2
φ
Round Special-shaped LED............................................ 25
SEL4017 Series
■5
φ
Inverted-cone LED for surface illumination ..................... 26
SEL1013 Series
■3
φ
Inverted-cone
LED for surface illumination (Direct Mount)
.... 27
SEL6013 Series
■3
φ
Inverted-cone LED for surface illumination ..................... 28
SEL2013 Series
■Lamp Casings Inverted-cone LED for surface illumination .. 29
■3×5 Rectangular LED........................................................... 30
SEL1021 Series
■2.5×5 Rectangular LED........................................................ 31
SEL1022 Series
■2×5 Rectangular LED........................................................... 32
SEL1020 Series
■1×5 Rectangular LED........................................................... 33
SEL1024 Series
■2×4 Rectangular LED........................................................... 34
SEL4025 Series
■2×4 Rectangular LED (Direct Mount)................................... 35
SEL4026 Series
■4
φ
Bow-shaped LED ............................................................ 36
SEL4027 Series
■3.1
φ
Bow-shaped LED ......................................................... 37
SEL4028 Series
■3.1
φ
Bow-shaped LED (Direct Mount) ................................. 38
SEL4029 Series
■4
φ
Bow-shaped LED (Direct Mount) .................................... 39
SEL6027 Series
■5-mm Pitch Lead Rectangular LED (Direct Mount).............. 40
SEL5020 Series
■5-mm Pitch Lead 3
φ
Lens-type LED (Direct Mount) ............ 41
SEL5021 Series
■5-mm Pitch Lead Bow-shaped LED (Direct Mount) ............. 42
SEL5023 Series
■5-mm Pitch Lead Egg-shaped LED (Direct Mount).............. 43
SEL5055 Series
■5
φ
Round Standard Bicolor LED .......................................... 44
SML1016/10016 Series
■5
φ
Round Bicolor LED.......................................................... 45
SML10051 Series
■2.5×5 Rectangular Bicolor LED............................................ 46
SML10060 Series
■3.3×6 Rectangular Bicolor LED (Direct Mount).................... 47
SML70020 Series
■3.3×6 Bow-shaped Bicolor LED (Direct Mount) ................... 48
SML70023 Series
■Egg-shaped Bicolor LED (Direct Mount).............................. 49
SML70055 Series
■3×1.5 Surface Mount LED (Flat Lens) ................................. 50
SEC1001 Series
■3×1.5 Surface Mount LED (Inner Lens) ............................... 51
SEC1003 Series
■3×2.5 Bicolor Surface Mount LED (Flat Lens) ..................... 52
SEC2002 Series
■3×2.5 Bicolor Surface Mount LED (Inner Lens) ................... 53
SEC2004 Series
■5
φ
Round Infrared LED - ...................................................... 54
SID1010M Series
■5
φ
Round Infrared LED (Direct Mount) ................................ 55
SID1050M Series
■5
φ
Round Infrared LED ........................................................ 56
SID300/1003 Series
■3
φ
Round Infrared LED ........................................................ 57
SID2010 Series
■Characteristic Curves........................................................... 58
■Taping Specifications........................................................... 61
■List of Discontinued Products .............................................. 64
2
Product Designation
SEL
Single-color LED
1 1 10 RTP1
Lens color
(See next page)
Product type SEL: General-purpose single-color LED
SELU/SELS: Ultra-high-intensity single-color LED
Structure
1: 5
φ
type
2: 3
φ
type
4: 4
φ
type
5: 5 mm pitch lead type - Direct mount
6: 3
φ
type - Direct mount
Emitting color
(See next page) Taping number
(See taping list)
Ex:
SML
Bicolor LED
1 6 7 16 W N TP4
Product type SML: General-purpose bicolor LED
SMLU/SMLS: Ultra-high-intensity bicolor LED
Structure
1: 5
φ
type
7: Direct mount
Lens color
(See next page)
Emitting color
(See next page)
In case of single digit
2: Red/green
5: Deep red/pure green
8: Amber/green
Common
- : Common cathode
N: Common anode
Taping number
(See taping list)
Ex:
SEC
Surface Mount LEDs
1 1 0 1 C
Lens color
(See next page)
Product type SEC: General-purpose surface mount LED
SECU/SECS: Ultra-high-intensity surface mount LED
Emitting color
(See next page)
(Right-hand digit 0 for
single color LED)
Structure
1: Single color
2: Bilcolor Shape
1,2: Flat lens type
3,4: Inner lens type
Product type
Ex:
Shape
Shape
3
Product Designation
R Diffused red
W Diffused white
S Transparent red
C Clear
D Diffused orange
A Transparent orange
Y Diffused yellow
1
2
4
5
6
7
8
9
B
D
E
:
:
:
:
:
:
:
:
:
:
:
Deep red
Red
Green
Pure green
High-intensity red
Yellow
Amber
Orange
Blue
GaP
GaAsP
GaP
GaP
GaAlAs
GaP
GaAsP
GaAsP
GaN
700
630
560/558
555
660
570
610
587
430
Ultra-high-intensity red
Ultra-high-intensity yellow
Ultra-high-intensity amber
Ultra-high-intensity orange
Ultra-high-intensity light amber
Ultra-high-intensity pure green
Ultra-high-intensity blue
AlGaInP
AlGaInP
AlGaInP
AlGaInP
AlGaInP
InGaN
InGaN
635
572
615
590
600
525
470
Color code Standard type
Emitting color Chip
material
Peak
wavelength
(nm)
Ultra-high-intensity type
Emitting color
SID
Infrared LED (1)
1 0 10 C M TP7
Taping number
(See taping list)
Product type SID: Infrared
Structure
1: 5
φ
type
2: 3
φ
type
Chip type
0 : Standard (λP=940 nm)
K: High output (λP=940 nm)
G: High output (λP=850 nm)
Lens color
(See below)
Lead frame shape
- : Standard
M: Straight
Ex:
SID
Infrared LED (2)
303 C
TP18
Taping number
(See taping list)
Product type SID: Infrared
Lens color
(See below)
Ex:
K Transparent yellow
G Diffused green
E Transparent green
B Transparent blue
BR Transparent dark blue
BP Transparent Violet
BQ Transparent light dark blue
Lens color
Shape
Shape
Chip
material
Peak
wavelength
(nm)
4
Selection Guide
Single-color LEDs/Single-color surface mount LEDs
Emitting color and peak wavelength
Y...Supported
N...Not supported
★...Not supported
Shape
Color code⇒EED5447799B882261
Peak wavelength[nm]⇒430 470 525 555 558 560 570 572 587 590 600 610 615 630 635 660 700
Standard N SEL1010 OOOO OOOO10
N SEL1010M OOOO OO 11
5
φ
Wide directivity
N SEL1010XM OO O O 12
Narrow Y SEL1050M O*O*OO O OOO 13
directivity N SEL1015 O14
N SEL1011 OO O O O O 15
5.6×4.6
φ
Egg-shaped N SEL1053M OOO16
Round 4
φ
Standard N SEL4010 OOOO OO O17
Wide directivity
Y SEL4014 OOOO OO O18
Standard Y SEL6010 OOOO OO O19
Wide directivity
Y SEL6014 OOOOOOOO 20
3
φ
Narrow directivity
Y SEL6015 OOOO O 21
Standard N SEL2010 OO OO OO OO O O OO 22
Narrow directivity
N SEL2015 OOOO OO 23
N SEL2011 OO O24
2
φ
N SEL4017 OO O O O 25
5
φ
N SEL1013 OOOO OO 26
Inverted
3
φ
For surface Y SEL6013 OO 27
cone 3
φ
illumination N SEL2013 OOOO OOO28
3×5 N SEL1021 OO O O O 30
2.5×5 N SEL1022 OO O O O 31
Rectangular
2×5 N SEL1020 OO O O O O 32
1×5 N SEL1024 OOOO O O33
2×4 N SEL4025 OOOO OO 34
2×4 Y SEL4026 OO O O O 35
4
φ
N SEL4027 OO36
Bow shaped
3.1
φ
N SEL4028 OOOO O O O O 37
3.1
φ
Y SEL4029 OO O O O 38
4
φ
Y SEL6027 OO O 39
Rectangular Y SEL5020 OO O O OOO40
3
φ
Narrow directivity
Y SEL5021 OOOO OO 41
Bow-shaped Wide Y SEL5023 OO O OOOOOOOOOO 42
5.6×4.6
φ
directivity Y SEL5055 OO O 43
Surface Flat lens SMD SEC1001 OO OO O OO O O O OO 50
mount Inner lens SMD SEC1003 OOOO OO OOOOO 51
5 mm
pitch lead
Lens diameter
Feature
Direct mount
Series
Blue
Ultra-high-intensity blue
Ultra-high-intensity pure green
Pure green
Deep green
Green
Yellow
Ultra-high-intensity yellow
Orange
Ultra-high-intensity orange
Ultra-high-intensity light amber
Amber
Ultra-high-intensity amber
Red
Ultra-high-intensity red
High-intensity red
Deep red
Page
5
Selection Guide
Color code⇒54447977772745457
Peak wavelength[nm]⇒555 560 560 560 570 587 570 572 570 572 630 570 560 555 560 555 570
N SML1016/10016 OO OO 44
5
φ
Standard N SML10016N O44
Round N SML10051 O45
N SML10051N O45
5.6×4.6
φ
Egg-shaped Y SML70055 OOOOO 49
Y SML70055N O49
2.5×5N SML10060 OO 46
Rectangular
N SML10060N O46
3.3×6 Y SML70020 OOO 47
Bow-shaped Y SML70023 OOO OO 48
Surface Flat lens SMD SEC2002 OOO OOOO52
mount Inner lens SMD SEC2004 OO O OO53
Emitting color and peak wavelength
Chip type⇒GK0
Peak wavelength[nm]⇒850 940 940
N SID1010 OO 54
Round 5
φ
Y SID1050 O55
N SID300/1003 OO56
3
φ
N SID2010 OO 57
Bicolor LEDs/Bicolor surface mount LEDs
Infrared LED lamps
Color code⇒12896292289269457
Peak wavelength[nm]⇒700 630 610 587 660 630 590 635 630 615 587 630 660 587 560 555 570
Y...Supported
N...Not supported
Y...Supported
N...Not supported
Shape
Lens diameter
Feature
Direct mount
Series
Series
Page
Deep red
Red
Red
Red
Red
Amber
Orange
Orange
Orange
High-intensity red
High-intensity red
Ultra-high-intensity orange
Ultra-high-intensity red
Red
Ultra-high-intensity amber
Orange
green
Pure green
Yellow
Pure green
Pure green
Pure green
green
green
green
green
green
Yellow
Yellow
Yellow
Yellow
Yellow
Ultra-high-intensity yellow
Ultra-high-intensity yellow
Profile
Lens diameter
Direct mount
Series
High-output infrared
High-output infrared
Infrared
Page
6
Product Index by Part Number
SEC1101C 50
SEC1201C 50
SEC1203C 51
SEC1401C 50
SEC1401E-TG 50
SEC1403C 51
SEC1403E-TG 51
SEC1501C 50
SEC1503C 51
SEC1601C 50
SEC1603C 51
SEC1701C-YG 50
SEC1703C 51
SEC1801C 50
SEC1803C 51
SEC1901C 50
SEC1903C 51
SEC1E01C 50
SEC2422C 52
SEC2442C 52
SEC2462C 52
SEC2484C 53
SEC2492C 52
SEC2494C 53
SEC2552C 52
SEC2554C 54
SEC2592C 52
SEC2762C-YG 52
SEC2764C 53
SEC2774C 54
SECS1203C 51
SECS1803C 51
SECS1903C 51
SECU1D01C 50
SECU1E01C 50
SEL1110R 10
SEL1110S 10
SEL1110W 10
SEL1111R 15
SEL1120R 32
SEL1121R 30
SEL1124R 33
SEL1210R 10
SEL1210RM 11
SEL1210S 10
SEL1210SM 11
SEL1211R 15
SEL1213C 26
SEL1220R 32
SEL1222R 31
SEL1250RM 13
SEL1250SM 13
SEL1410E 10
SEL1410EM 11
SEL1410G 10
SEL1410GM 11
SEL1411G 15
SEL1413E 26
SEL1420G 32
SEL1421G 30
SEL1422G 31
SEL1424G 33
SEL1450EKM 13
SEL1450GM-YG 13
SEL1453CEMKT 16
SEL1510C 10
SEL1510CM 11
SEL1513E 26
SEL1550CM 13
SEL1610C 10
SEL1610W 10
SEL1615C 14
SEL1710K 10
SEL1710KM 11
SEL1710Y 10
SEL1711Y 15
SEL1713K 26
SEL1720Y 32
SEL1721Y 30
SEL1722K 31
SEL1722Y 31
SEL1724Y 33
SEL1810A 10
SEL1810AM 11
SEL1810D 10
SEL1810DM 11
SEL1811D 15
SEL1813A 26
SEL1820D 32
SEL1821D 30
SEL1822D 31
SEL1824D 33
SEL1850AM 13
SEL1850DM 13
SEL1910A 10
SEL1910AM 11
SEL1910D 10
SEL1910DM 11
SEL1911D 15
SEL1913K 26
SEL1920D 32
SEL1921D 30
SEL1922D 31
SEL1924D 33
SEL1950KM 13
SEL2110R 22
SEL2110S 22
SEL2110W 22
SEL2111R 24
SEL2210R 22
SEL2210S 22
SEL2210W 22
SEL2213C 28
SEL2215R 23
SEL2215S 23
SEL2410E 22
SEL2410G 22
SEL2411G 24
SEL2413E 28
SEL2413G 28
SEL2415E 23
SEL2415G 23
SEL2510C 22
SEL2510G 22
SEL2513E 28
SEL2515C 23
SEL2610C 22
SEL2613CS-S 28
SEL2710K 22
SEL2710Y 22
SEL2713K 28
SEL2715K 23
SEL2715Y 23
SEL2810A 22
SEL2810D 22
SEL2813A 28
SEL2815A 23
SEL2815D 23
SEL2910A 22
SEL2910D 22
SEL2911D 24
SEL2913K 28
SEL2915A 23
SEL2915D 23
SEL2E10C 22
SEL4110R 17
SEL4110S 17
SEL4114R 18
SEL4114S 18
SEL4117R 25
SEL4210R 17
SEL4210S 17
SEL4214R 18
SEL4214S 18
SEL4225C 34
SEL4225R 34
SEL4226C 35
SEL4226R 35
SEL4227C 36
SEL4228C 37
SEL4229R 38
SEL4410E 17
SEL4410G 17
SEL4414E 18
SEL4414G 18
SEL4417G 25
SEL4425E 34
SEL4425G 34
Part Number Page Part Number Page Part Number Page
7
Product Index by Part Number
SEL4426E 35
SEL4426G 35
SEL4427EP 36
SEL4428B-TG 37
SEL4428E 37
SEL4429E 38
SEL4510C 17
SEL4514C 18
SEL4525C 34
SEL4528C 37
SEL4628C-S 37
SEL4710K 17
SEL4710Y 17
SEL4714K 18
SEL4714Y 18
SEL4717Y 25
SEL4725K 34
SEL4725Y 34
SEL4726K 35
SEL4726Y 35
SEL4728K 37
SEL4729KH 38
SEL4810A 17
SEL4810D 17
SEL4814A 18
SEL4814D 18
SEL4817D 25
SEL4825A 34
SEL4825D 34
SEL4826A 35
SEL4826D 35
SEL4828A 37
SEL4829A 38
SEL4910A 17
SEL4910D 17
SEL4914A 18
SEL4914D 18
SEL4917D 25
SEL4925A 34
SEL4925D 34
SEL4926A 35
SEL4926D 35
SEL4928A 37
SEL4929A 38
SEL5220S 40
SEL5221S 41
SEL5223S 42
SEL5255S 43
SEL5420E 40
SEL5421E 41
SEL5423E 42
SEL5520C 40
SEL5521C 41
SEL5523C 42
SEL5620C 40
SEL5721C 41
SEL5723C 42
SEL5755C 43
SEL5820A 40
SEL5821A 41
SEL5823A 42
SEL5920A 40
SEL5921A 41
SEL5923A 42
SEL5955A 43
SEL5E23C 42
SEL6110R 19
SEL6110S 19
SEL6210R 19
SEL6210S 19
SEL6214S 20
SEL6215S 21
SEL6227S 39
SEL6410E 19
SEL6410G 19
SEL6413E 27
SEL6414E 20
SEL6414E-TG 20
SEL6415E 21
SEL6427EP 39
SEL6510C 19
SEL6510G 19
SEL6513C 27
SEL6514C 20
SEL6515C 21
SEL6710K 19
SEL6710Y 19
SEL6714K 20
SEL6714W 20
SEL6715C 21
SEL6810A 19
SEL6810D 19
SEL6814A 20
SEL6910A 19
SEL6910D 19
SEL6914A 20
SEL6914W 20
SEL6915A 21
SEL6927A 39
SELS5223C 42
SELS5823C 42
SELS5923C 42
SELS5B23C 42
SELS6B14C 20
SELU1210CXM 12
SELU1250CM 13
SELU1253CMKT 16
SELU1810CXM 12
SELU1853CMKT 16
SELU1D10CXM 12
SELU1D50CM 13
SELU1E10CXM 12
SELU1E50CM 13
SELU2710C 22
SELU2D10C 22
SELU2E10C 22
SELU5723C 42
SELU5823C 42
SELU5E20C 40
SELU5E23C 42
SID1003BQ 56
SID1010CM 54
SID1010CXM 54
SID1050CM 55
SID1G307C 56
SID1K10CM 54
SID1K10CXM 54
SID2010C 57
SID2K10C 57
SID303C 56
SID307BR 56
SID313BP 56
SML11516C 44
SML1216C 44
SML1216W 44
SML12451W 45
SML12460C 46
SML1516W 44
SML16716CN 44
SML16716WN 44
SML16751WN 45
SML16760CN 46
SML1816W 44
SML19416W 44
SML19460C 46
SML72420C 47
SML72423C 48
SML72755C 49
SML72923C 48
SML76755WN 49
SML78420C 47
SML78423C 48
SML79255C 49
SML79420C 47
SML79423C 48
SML79455C 49
SMLS79723C 48
SMLU72755C 49
SMLU78755C 49
Part Number Page Part Number Page Part Number Page
8
Sanken Electric’s light emitting diodes (LEDs) are all molded in
resin molds.
When using Sanken's LEDs, observe the following cautions:
■Heat resistance of mold resin
Since an LED must emit internally generated light with high
efficiency, a highly transparent resin is used for molding. To
ensure high transparency, the molding material must be free from
the additives(silica, glass fiber, and others) that are used to
improve the heat and moisture resistance of other semiconductor
components(such as transistors).
Since the resin used for LEDs generally has a low heat resistance,
the following cautions must be fully considered.
Never apply an external force, stress, or excess vibration to the
terminals (leads) at high temperature. The glass transition point of
the epoxy resin used in LEDs is about 120 to 130°C. Beyond this
temperature range, the coefficient of linear thermal expansion
becomes more than double that at room temperature, and the
100 500
Terminal load (g)
160
140
120
100
Disconnection temperature (°C)
10
8
6
4
2
0ABC
Fracture strength (kg)
Tensile direction
Tie-bar
cut
Application Notes
Fracture strength
Figure 1 Disconnection temperature - Terminal load
resin softens as well.
Under this condition, an external force or stress may budge the
terminals, and may result in disconnection of the internal wire.
Figure 1 shows reference data for the disconnection temperature
and terminal load for the SEL1010 Series.
●Do not apply heat beyond the absolute maximum rating of the
storage temperature (100°C for ordinary LEDs, 90°C for chip
LEDs). (For soldering, see the soldering conditions.)
■Mechanical strength
If an excessive mechanical force is applied between the lens resin
and the terminals, the lens resin or internal connections may be
damaged. The previous figure shows the fracture strength of the
SEL1000 Series according to the direction of the force applied to
the terminals. When aligning or forming the terminals after
soldering, do not bend or twist them with a force beyond the limits
shown in the diagram below.
■Forming
1.Be sure to form terminals before soldering.
2.When forming the terminals, hold tightly them at a point closer
to the lens resin than the forming position to prevent stress from
being applied between the lens resin and the terminals.
3.Form the terminals only below the tie-bar cuts(protruding part of
the terminals).
4.Make the forming pitch equal to the board hole pitch.
■Chemical resistance
For washing after soldering, the following chemicals are
recommended:
•Isopropyl alcohol
•Ethyl alcohol
In addition, keep the dip time within five minutes and work at room
temperature.
•Freon-substitute cleaning liquid
Depending on the constituents, the chemicals may discolor the
resin. Make sure that there will be no problems before use.
■Mounting method
Do not mount the LED in such a way that there is a residual stress
between the terminal and lens resin.
■Soldering
1. Mounting holes
The recommended PCB hole diameters are as follows:
Lead diameter PCB hole diameter
0.4×0.45mm
φ
0.9 to 1.0
0.5mm
φ
1.0 to 1.1
0.6mm
φ
1.0 to 1.2
9
Part surface temperature (°C)
Time
120 sec. 5 sec.
150max
240max
Standard
Manual contact mount insertion
Automatic contact mount insertion
Temperature
Iron bit: 320 to 340°C Iron bit: 320 to 340°C
Time 3 sec. or less 3 sec. or less
Temperature
Soldering Bath: 250±5°C Soldering Bath: 250±5°C
Preheat: 90°C (back of the PCB)
Soldering Bath: 250°C
Time 3 sec. or less 3 sec. or less 2 min. or less 3 sec. or less
5mm
1.6
1.6
2. Soldering conditions
●Lamp Type
■Overcurrent
Since an overcurrent may burn the LED, connect a protective
resistor in series to prevent a current in excess of 100 mA in the
case of a spontaneous pulse (excluding infrared LED).
■Contact mount LEDs
•Printed circuit board(PCB)
Single-faced PCBs are recommended. (Do not use through hole
types when using double-faced PCBs.) If chip components coexist
on the same board, insert the LEDs after curing the chip adhesive.
•Conditions of insertion
Keep the insertion pressure as low as possible. The T pattern of
Pana-sert is recommended for cut & clinch. When using the N
pattern, maximize the clinch angle on the anode side of the LED.
■
Moisture-proof packaging of Surface Mount LEDs
1. Influence of moisture absorption on resin of chip LEDs
•If the resin is unusually damp, solder dipping may cause interfacial
defoliation. This phenomenon, generally called "popcorn
5mm
Soldering
iron
Time
120 sec.
Room temperature 30 sec.
Pre-heating
120max
Hardening
of adhesive
150max
260max
Dip
5 sec.
Part surface temperature (°C)
Dip
Position
Position
Dip
Reflow
Soldering iron Iron bit temperature: 300°C max, 3 sec max
●Surface Mount Type
Bicolor SEC2002/2004
Series
Application Notes
Single-color SEC1001/1003
Series
•The heat resistance of the mold-resin of the direct mount type is almost equal to that of the standard type. Be careful not to apply a load when the LED is heated.
•When thermally curing the adhesive of chip components on the same board after LED mounting, keep the temperature of the curing oven below 120°C and the curing
time to less than 60 seconds. (For soldering a Surface Mount LED, see the soldering conditions.)
•When an LED is mounted by means of automatic contact mount insertion, note that soldering defects may occur depending on the conditions of insertion even under
the above conditions. phenomenon", occurs when a drastic temperature change causes
moisture in the resin to evaporate and to swell.
•Due to this defoliation, the efficiency of light emission might
worsen and the luminosity could lower.
2. Moisture-proof packaging
•Surface Mount LEDs are protected by a moisture-proof packaging
(baked on by Sanken) to minimize moisture absorption by the
resin before use.
•Aluminum laminates with high moisture resistance are used for
packaging.
•Silica gel packs are enclosed in each package to further improve
moisture-proof efficiency.
3. Storage after opening
•Once the package has been opened, solder dipping should be
carried out within seven days.
4. Handling of Remaining LED Chips
•If some Surface Mount LEDs have not been used, put them back
into the moisture-proof packaging, seal the package completely
and store it in a dry place.
■
Reference mounting pattern for Surface Mount LED (Unit: mm)
1.5min
2.22.2
1.7
2.22.2 0.9min
1.4 1.4
0.5min
10
Forward voltage
VF
Condition
(V) IF
typ max (mA)
2.0
1.75
1.9
1.9
1.9
2.0
2.0
2.0
SEL1110R
SEL1110W
SEL1110S
SEL1610W
SEL1610C
SEL1210R
SEL1210S
SEL1810D
SEL1810A
SEL1910D
SEL1910A
SEL1710Y
SEL1710K
SEL1410G
SEL1410E
SEL1510C
Part
Number
Lens color
Diffused red
Diffused white
Transparent red
Diffused white
Clear
Diffused red
Transparent red
Diffused orange
Transparent orange
Diffused orange
Transparent orange
Diffused yellow
Transparent yellow
Diffused green
Transparent green
Clear
Electrical Optical characteristics (Ta=25°C)
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
2.5
2.2
2.5
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
10
10
10
50
100
50
50
50
50
50
50
5
20
20
10
10
10
20
20
10
10
10
10
10
10
10
10
700
660
630
610
587
570
560
555
100
30
35
35
33
30
20
20
10
10
10
10
10
10
10
10
3
3
3
3
3
3
3
3
2.8
2.8
4.5
1000
1200
26
75
18
37
14
25
22
65
32
84
50
Directivity (Typical)External Dimensions
Diffuse lens Transparent lens
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL1010 Series
ø
5.6
±0.2
20.0min 5.0
±0.5
7.6
±0.2
20.0min 5.0
±0.5
7.6
±0.2
19.0min 0.8 (1.0)
19.0min 0.8 (1.0)
Cathode
Cathode
0.5
(2.54)
0.5
1.1max
0.8
(2.54)
0.5
1.1max
0.8
Resin heap 1.5max
ø
5.0
±0.2
ø
5.0
±0.2
ø
5.6
±0.2
0.5
Resin heap 1.5max
90°
60°
30°0°
90°
60°
30°
050100% 50 100% 90°
60°
30°0°
90°
60°
30°
050100% 50 100%
5
φ
Round Standard LED
(With Stopper)
SEL1010 Series
Chip
material
GaP
GaAlAs
GaAsP
GaP
Deep red
Red
Amber
Orange
Yellow
Green
Pure green
Emitting color
Tolerance: ±0.3
(Unit: mm)
(Other than GaAlAs chip)
(GaAlAs chip)
High-
intensity red
11
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
1.9
1.9
1.9
2.0
2.0
2.0
SEL1210RM
SEL1210SM
SEL1810DM
SEL1810AM
SEL1910DM
SEL1910AM
SEL1710KM
SEL1410GM
SEL1410EM
SEL1510CM
5
φ
Round Standard LED
SEL1010M Series
Diffused red
Transparent red
Diffused orange
Transparent orange
Diffused orange
Transparent orange
Transparent yellow
Diffused green
Transparent green
Clear
Electrical Optical characteristics (Ta=25°C)
36
75
18
37
19
34
65
30
84
50
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL1010 Series
2.5
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
10
50
50
50
50
50
50
3
3
3
3
3
3
20
10
10
10
20
20
630
610
587
570
560
555
10
10
10
10
10
10
35
35
33
30
20
20
10
10
10
10
10
10
Diffuse lens Transparent lens
ø
5.6
±0.2
23.0min1.0min 7.6
±0.2
Cathode
0.65max
Resin heap 1.5max
ø
5.0
±0.2
0.5
±0.1
0.5
±0.1
(1.0)
(2.54)
90°
60°
30°0°
90°
60°
30°
050100% 50 100% 90°
60°
30°0°
90°
60°
30°
050100% 50 100%
GaAsP
GaP
Red
Amber
Orange
Yellow
Green
Pure green
Tolerance: ±0.3
(Unit: mm)
12
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
2.0
3.3
SELU1210CXM
SELU1810CXM
SELU1D10CXM
SELU1E10CXM
5
φ
Round Wide-directivity LED
SEL1010XM Series
Clear
Clear
Clear
Clear
Electrical Optical characteristics (Ta=25°C)
280
570
2000
600
Directivity (Typical)External Dimensions
AlGaInP InGaN
Symbol Unit Rating Condition
AlGaInP InGaN
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV45
Top °C−
30 to +85
−
25 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL1010 Series
2.5
4.0
10
20
100
10
4
5
20
20
20
20
635
615
525
470
10
10
10
10
15
15
35
35
10
10
10
10
ø
5.6
±0.2
23.0min1.0min 6.9
±0.2
Cathode
0.65max
Resin heap 1.5max
ø
5.0
±0.2
(2.54)
0.5
±0.1
(1.0)
0.5
±0.1
AlGaInP
InGaN
–90°
–60°
–30°0
90°
60°
30°
100% 100% –90°
–60°
–30°0
90°
60°
30°
100% 100%
050 50 050 50
Tolerance: ±0.3
(Unit: mm)
Ultra-high-
intensity red
Ultra-high-
intensity amber
Ultra-high-intensity
pure green
Ultra-high-
intensity blue
13
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
5
φ
Round Narrow-directivity LED
(Direct Mount)
SEL1050M Series
Electrical Optical characteristics (Ta=25°C)
Directivity (Typical)External Dimensions
Transparent lens
Symbol Unit Rating Condition
GaP/GaAsP AlGaInP InGaN
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3 4 5
Top °C −30 to +85 −25 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL1050M Series
2.0
1.9
1.9
1.9
2.0
2.0
3.3
3.3
SELU1250CM
SEL1250SM
SEL1250RM
SEL1850AM
SEL1850DM
SEL1950KM
SEL1450EKM
SEL1450GM-YG
SEL1550CM
SELU1D50CM
SELU1E50CM
Clear
Transparent red
Diffused red
Transparent orange
Diffused orange
Transparent orange
Transparent green
Diffused green
Clear
Clear
Clear
900
75
48
90
60
96
190
120
72
6000
1850
2.5
2.5
2.5
2.5
2.5
2.5
4.0
4.0
10
10
10
10
10
10
20
20
100
50
50
50
50
50
10
10
4
3
3
3
3
3
5
5
20
20
20
20
20
20
20
20
635
630
610
587
560
555
525
470
10
10
10
10
10
10
10
10
15
35
35
33
20
20
35
35
10
10
10
10
10
10
10
10
0.5±0.1 Anode
Cathode
1.0min 21.0min 9.4±0.3
ø
5.0±0.2
Resin heap 0.8maxResin burr 0.3max
0.65
max
0.5±0.1
(2.54)
Red
Amber
Orange
Green
Pure green
AlGalnP
GaAsP
GaAsP
GaP
InGaN
–90°
–60°
–30°0
90°
60°
30°
100% 100%
050 50
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
Diffuse lens
Tolerance: ±0.3
(Unit: mm)
Ultra-high-intensity
pure green
Ultra-high-
intensity blue
Ultra-high-
intensity red
14
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
1.75
SEL1615C
5
φ
Round Narrow-directivity LED
SEL1015 Series
Clear
Electrical Optical characteristics (Ta=25°C)
700
Directivity (Typical)External Dimensions
SEL1015 Series
2.2 10 100 3 20 660 10 30 10
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
ø
5.6
±0.2
20.0min 5.5
±0.5
8.2
±0.2
19.0min 0.8 (1.0)
Cathode
0.5
±0.1
1.1max
0.8
Resin heap 1.5max
ø
5.0
±0.2
0.5
(2.54)
GaAIAs
Tolerance: ±0.3
(Unit: mm)
High-
intensity red
15
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
SEL1111R
SEL1211R
SEL1811D
SEL1911D
SEL1711Y
SEL1411G
5
φ
Cylindrical LED
SEL1011 Series
Diffused red
Diffused red
Diffused orange
Diffused orange
Diffused yellow
Diffused green
Electrical Optical characteristics (Ta=25°C)
1.4
12
8.0
8.0
13
30
External Dimensions
SEL1011 Series
10
20
10
10
10
20
700
630
610
587
570
560
10
10
10
10
10
10
100
35
35
33
30
20
10
10
10
10
10
10
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
2.0
1.9
1.9
1.9
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
10
50
50
50
50
50
50
3
3
3
3
3
3
ø
5.6±0.2 20.0min 5.0±0.5 7.9±0.2
19.0min 0.8 (1.0)
Cathode
0.5
(2.54)
0.5±0.1
1.1max
0.8
Resin heap 1.5max
ø
5.0±0.2
GaP
GaAsP
GaP
Deep red
Red
Amber
Orange
Yellow
Green
Tolerance: ±0.3
(Unit: mm)
16
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
SELU1253CMKT
SELU1853CMKT
SEL1453CEMKT
4.6
×
5.6
φ
Egg-shaped LED
SEL1053M Series
Electrical Optical characteristics (Ta=25°C)
200
450
140
Directivity (Typical)External Dimensions
AlGaInP
SEL1053M Series
20
20
20
635
615
560
10
10
10
15
15
20
10
10
10
Symbol Unit Rating Condition
GaP AlGaInP
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV34
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
2.0
2.0
2.0
2.5
2.5
2.5
10
10
10
100
100
50
4
4
3
AlGaInP
GaP
Clear
Clear
Transparent green
Green
–90°
–60°
–30°0
90°
60°
30°
100% 100% –90°
–60°
–30°0
90°
60°
30°
100% 100%
050 50 050 50
–90°
–60°
–30°0
90°
60°
30°
100% 100% –90°
–60°
–30°0
90°
60°
30°
100% 100%
050 50 050 50
GaP
Tolerance: ±0.3
(Unit: mm)
5.6±0.2
Resin burr 0.3max
4.6±0.2
1.0min 23.5min
Cathode
Anode 7.7±0.5
(2.54)
0.65max
4.7±0.2
5.7±0.2
2-0.5±0.1
0.5±0.1
Resin heap 1.5max
Ultra-high-
intensity red
Ultra-high-
intensity amber
17
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
2.0
1.9
1.9
1.9
2.0
2.0
2.0
SEL4110S
SEL4110R
SEL4210S
SEL4210R
SEL4810A
SEL4810D
SEL4910A
SEL4910D
SEL4710K
SEL4710Y
SEL4410E
SEL4410G
SEL4510C
4
φ
Round Standard LED
SEL4010 Series
Transparent red
Diffused red
Transparent red
Diffused red
Transparent orange
Diffused orange
Transparent orange
Diffused orange
Transparent yellow
Diffused yellow
Transparent green
Diffused green
Clear
Electrical Optical characteristics (Ta=25°C)
2.4
1.7
30
17
20
15
26
16
36
14
87
34
45
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL4010 Series
2.5
2.5
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
10
10
50
50
50
50
50
50
50
3
3
3
3
3
3
3
5
20
10
10
10
10
20
20
20
700
630
610
587
570
560
555
10
10
10
10
10
10
10
100
35
35
33
30
20
20
10
10
10
10
10
10
10
Diffuse lens Transparent lens
2.2
ø
4.8
0.4±0.1
(2.54)
0.45±0.1
1.1max
Resin heap 1.5max
Cathode
1.0min 25.5min 5.0±0.2
6.5±0.5
0.8 1.5
ø
4.0±0.2
90°
60°
30°0°
90°
60°
30°
050100% 50 100% 90°
60°
30°0°
90°
60°
30°
050100% 50 100%
Deep red
Red
Amber
Orange
Yellow
Green
Pure green
GaP
GaAsP
GaP
Tolerance: ±0.3
(Unit: mm)
18
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
4
φ
Round Wide-directivity LED
(Direct Mount)
SEL4014 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to 100
Absolute maximum ratings (Ta=25°C)
SEL4014 Series
2.0
1.9
1.9
1.9
2.0
2.0
2.0
SEL4114S
SEL4114R
SEL4214S
SEL4214R
SEL4814A
SEL4814D
SEL4914A
SEL4914D
SEL4714K
SEL4714Y
SEL4414E
SEL4414G
SEL4514C
Transparent red
Diffused red
Transparent red
Diffused red
Transparent orange
Diffused orange
Transparent orange
Diffused orange
Transparent yellow
Diffused yellow
Transparent green
Diffused green
Clear
Electrical Optical characteristics (Ta=25°C)
3.8
2.8
40
24
20
15
26
11
38
27
69
48
26
2.5
2.5
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
10
10
50
50
50
50
50
50
50
3
3
3
3
3
3
3
10
20
10
10
10
20
20
700
630
610
587
570
560
555
10
10
10
10
10
10
10
100
35
35
33
30
20
20
10
10
10
10
10
10
10
Diffuse lens Transparent lens
90°
60°
30°0°
90°
60°
30°
050100% 50 100% 90°
60°
30°0°
90°
60°
30°
050100% 50 100%
2.2
ø
4.8
(2.54)
0.45±0.1
0.65max
Resin heap 0.8max
1.0min 24.5min 5.0±0.2
ø
4.0±0.2
(1.5)
0.4±0.1
Cathode
Deep red
Red
Amber
Orange
Yellow
Green
Pure green
GaP
GaAsP
GaP
Tolerance: ±0.3
(Unit: mm)
19
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
2.0
1.9
1.9
1.9
2.0
2.0
2.0
SEL6110S
SEL6110R
SEL6210S
SEL6210R
SEL6810A
SEL6810D
SEL6910A
SEL6910D
SEL6710K
SEL6710Y
SEL6410E
SEL6410G
SEL6510C
SEL6510G
3
φ
Round LED
(Direct Mount)
SEL6010 Series
Transparent red
Diffused red
Transparent red
Diffused red
Transparent orange
Diffused orange
Transparent orange
Diffused orange
Transparent yellow
Diffused yellow
Transparent green
Diffused green
Clear
Diffused green
Electrical Optical characteristics (Ta=25°C)
3.9
2.6
41
18
22
9.6
22
11
37
11
90
30
42
9.6
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL6010 Series
2.5
2.5
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
10
10
50
50
50
50
50
50
50
3
3
3
3
3
3
3
10
20
10
10
10
20
20
700
630
610
587
570
560
555
10
10
10
10
10
10
10
100
35
35
33
30
20
20
10
10
10
10
10
10
10
Diffuse lens Transparent lens
Deep red
Red
Amber
Orange
Yellow
Green
Pure green
GaP
GaAsP
GaP
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
3.5
0.8±0.2
4.0±0.2
0.4±0.1
23.0min1.0min 5.5±0.5
(1.7) 3.5±0.1
(2.54)
ø
3.1±0.1
4.4
0.45±0.1
0.65max
Resin heap
0.8max
Cathode
Tolerance: ±0.3
(Unit: mm)
20
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3
φ
Round Wide-directivity LED
(Direct Mount)
SEL6014 Series
Directivity (Typical)External Dimensions
SEL6014 Series
1.9
1.9
2.0
1.9
2.0
2.0
2.0
SEL6214S
SEL6814A
SELS6B14C
SEL6914A
SEL6914W
SEL6714K
SEL6714W
SEL6414E
SEL6414E-TG
SEL6514C
Transparent red
Transparent orange
Clear
Transparent orange
Diffused white
Transparent yellow
Diffused white
Transparent green
Transparent green
Clear
Electrical Optical characteristics (Ta=25°C)
18
9.0
120
8.0
5.0
66
30
42
18
12
2.5
2.5
2.5
2.5
2.5
2.5
2.5
20
10
20
10
20
20
20
630
610
600
587
570
560
558
555
Transparent lens
Red
Amber
Orange
Yellow
Green
Deep green
Pure green
GaAsP
AlGaInP
GaAsP
GaP
10
10
10
10
10
10
10
50
50
100
50
50
50
50
3
3
4
3
3
3
3
10
10
10
10
10
10
10
35
35
15
33
30
20
20
10
10
10
10
10
10
10
3.5
0.8±0.2
4.0±0.2
0.4±0.1
23.0min1.0min 4.5±0.5
(1.6) 2.5±0.1
(2.54)
ø
3.5
4.4
0.45±0.1
0.65max
Resin heap
0.8max
Cathode
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
Tolerance: ±0.3
(Unit: mm)
Symbol Unit Rating Condition
GaAsP/GaP AlGaInP
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3 4
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
Ultra-high-intensity
light amber
21
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
1.9
1.9
2.0
2.0
2.0
SEL6215S
SEL6915A
SEL6715C
SEL6415E
SEL6515C
3
φ
Round Narrow-directivity LED
(Direct Mount)
SEL6015 Series
Transparent red
Transparent orange
Clear
Transparent green
Clear
Electrical Optical characteristics (Ta=25°C)
45
60
90
81
44
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL6015 Series
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
50
50
50
50
50
3
3
3
3
3
20
20
20
20
20
630
587
570
560
555
10
10
10
10
10
35
33
30
20
20
10
10
10
10
10
Transparent lens
Red
Orange
Yellow
Green
Pure green
GaAsP
GaP
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
3.5 5.5
0.8±0.2
4.0±0.2
0.4±0.1
23.0min1.0min (1.7) 3.5±0.1
(2.54)
ø
3.1±0.1
4.4
0.45±0.1
0.65max
Resin heap
0.8max
Resin burr
0.3max
Cathode mark
Cathode
Tolerance: ±0.3
(Unit: mm)
22
3
φ
Round Standard LED
SEL2010 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
GaP GaAsP GaAlAs AlGaInP InGaN GaN
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 70 f=1kHz, tw≤100
µ
s
VRV345
Top °C−30 to +85 −25 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL2010 Series
Electrical Optical characteristics (Ta=25°C)
Diffuse lens Transparent lens
1.7
ø
3.8
0.4
0.4
1.0min
1.0min
25.8min 3.5
±0.1
25.8min
3.5
±0.1
(1.3)
(1.3)
0.45
±0.1
0.65max
Resin heap 1.5max
0.45
±0.1
0.65max
Resin heap 1.5max
ø
3.1
±0.1
ø
3.1
±0.1
Cathode
Cathode
(2.54)(2.54)
1.7
ø
3.8
90°
60°
30°0°
90°
60°
30°
050100% 50 100% 90°
60°
30°0°
90°
60°
30°
050100% 50 100%
Tolerance: ±0.3
(Unit: mm)
(Other than GaAlAs chip)
(GaAlAs)
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
2.0
1.75
1.9
1.9
1.9
2.0
2.0
2.0
2.0
3.3
3.8
SEL2110S
SEL2110R
SEL2110W
SEL2610C
SEL2210S
SEL2210R
SEL2210W
SEL2810A
SEL2810D
SEL2910A
SEL2910D
SELU2710C
SEL2710K
SEL2710Y
SEL2410E
SEL2410G
SEL2510C
SEL2510G
SELU2D10C
SELU2E10C
SEL2E10C
Transparent red
Diffused red
Diffused white
Clear
Transparent red
Diffused red
Diffused white
Transparent orange
Diffused orange
Transparent orange
Diffused orange
Clear
Transparent yellow
Diffused yellow
Transparent green
Diffused green
Clear
Diffused green
Clear
Clear
Clear
4.0
1.8
1.8
350
40
15
15
22
9.0
16
8.0
270
40
14
77
20
43
8.2
1200
400
60
Deep red
Red
Amber
Orange
Yellow
Green
Pure green
Blue
GaP
GaAlAs
GaAsP
AlGaInP
GaP
InGaN
GaN
2.5
2.2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
4.0
4.8
10
10
10
10
10
10
10
10
10
20
20
50
100
50
50
50
100
50
50
50
10
10
3
3
3
3
3
4
3
3
3
5
5
10
20
20
10
10
20
10
20
20
20
20
20
700
660
630
610
587
572
570
560
555
525
470
430
10
10
10
10
10
10
10
20
10
10
10
10
100
30
35
35
33
15
30
20
20
35
35
65
10
10
10
10
10
10
10
10
10
10
10
10
High-
intensity red
Ultra-high-
intensity yellow
Ultra-high-intensity
pure green
Ultra-high-
intensity blue
23
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3
φ
Round Narrow-directivity LED
SEL2015 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL2015 Series
1.9
1.9
1.9
2.0
2.0
2.0
SEL2215S
SEL2215R
SEL2815A
SEL2815D
SEL2915A
SEL2915D
SEL2715K
SEL2715Y
SEL2415E
SEL2415G
SEL2515C
Transparent red
Diffused red
Transparent orange
Diffused orange
Transparent orange
Diffused orange
Transparent yellow
Diffused yellow
Transparent green
Diffused green
Clear
Electrical Optical characteristics (Ta=25°C)
45
38
80
60
81
53
130
110
110
72
52
2.5
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
10
50
50
50
50
50
50
3
3
3
3
3
3
20
10
10
10
20
20
630
610
587
570
560
555
10
10
10
10
10
10
35
35
33
30
20
20
10
10
10
10
10
10
Diffuse lens Transparent lens
Red
Amber
Orange
Yellow
Green
Pure green
GaAsP
GaP
1.55
ø
3.8
0.4
±0.1
1.0min 25.4min 4.0
±0.1
(1.3)
(2.54)
0.45±0.1
0.65max
Resin heap 1.5max
ø
3.1
±0.1
Cathode
90°
60°
30°0°
90°
60°
30°
050100% 50 100% 90°
60°
30°0°
90°
60°
30°
050100% 50 100%
Tolerance: ±0.3
(Unit: mm)
24
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
2.0
1.9
2.0
SEL2111R
SEL2911D
SEL2411G
3
φ
Cylindrical LED
SEL2011 Series
Diffused red
Diffused orange
Diffused green
Electrical Optical characteristics (Ta=25°C)
0.7
3.3
18
External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL2011 Series
2.5
2.5
2.5
10
10
10
50
50
50
3
3
3
10
10
20
700
587
560
10
10
10
100
33
20
10
10
10
Deep red
Orange
Green
GaP
GaAsP
GaP
1.7
ø
3.8
0.4±0.1
(2.54)
1.0min 25.8min 4.2±0.1
(1.3)
0.45±0.1
0.65max
Resin heap 1.5max
ø
3.1±0.1
Cathode
Tolerance: ±0.3
(Unit: mm)
25
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
2
φ
Round Special-shaped LED
SEL4017 Series
External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL4017 Series
2.0
1.9
1.9
2.0
2.0
SEL4117R
SEL4817D
SEL4917D
SEL4717Y
SEL4417G
Diffused red
Diffused orange
Diffused orange
Diffused yellow
Diffused green
Electrical Optical characteristics (Ta=25°C)
1.1
7.5
7.5
14
16
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
50
50
50
50
50
3
3
3
3
3
10
10
10
20
20
700
610
587
570
560
10
10
10
10
10
100
35
33
30
20
10
10
10
10
10
Deep red
Amber
Orange
Yellow
Green
1.0min 23.0min 8.0±0.2
(1.5) 4.0±0.1
4.0±0.2
4.4±0.2
2.5±0.2
ø
2.0±0.1
(2.54)
0.45±0.1
0.65max
Resin heap 1.5max
0.4±0.1
Cathode
C1.0
Tolerance: ±0.3
(Unit: mm)
GaP
GaAsP
GaP
26
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
5
φ
Inverted-cone LED for surface illumination
SEL1013 Series
Directivity (Typical)External Dimensions
SEL1013 Series
(Unit: mm)
1.9
1.9
1.9
2.0
2.0
2.0
SEL1213C
SEL1813A
SEL1913K
SEL1713K
SEL1413E
SEL1513E
Clear
Transparent orange
Transparent light orange
Transparent yellow
Transparent green
Transparent light green
Electrical Optical characteristics (Ta=25°C)
2.5
2.5
2.5
2.5
2.5
2.5
Red
Amber
Orange
Yellow
Green
Pure green
10
10
10
10
10
10
3
3
3
3
3
3
7.0
8.0
8.0
15
12
5.0
20
20
20
20
20
20
630
610
587
570
560
555
35
35
33
30
20
20
GaAsP
GaP
50
50
50
50
50
50
10
10
10
10
10
10
10
10
10
10
10
10
Tolerance: ±0.3
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to 85
Tstg °C−30 to 100
Absolute maximum ratings (Ta=25°C)
ø
5.6±0.2 20.0min 5.0±0.5 5.8±0.2
19.0min 0.8 (1.0)
0.5
0.5±0.1
1.1max
0.8
Resin heap 1.5max
ø
4.9±0.2
Cathode
(2.54)
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
27
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3
φ
Inverted-cone LED for surface illumination
(Direct Mount)
SEL6013 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL6013 Series
Tolerance: ±0.3
(Unit: mm)
SEL6413E
SEL6513C
Electrical Optical characteristics (Ta=25°C)
14
5.0 20
20 560
555 10
10 20
20 10
10
2.0
2.0 2.5
2.5 10
10 50
50 3
3
GaP
Transparent green
Clear
Green
Pure green
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
23.0min 4.51.0min
3.5 2.5±0.1
(1.7)
0.45±0.1
0.8±0.2
4.0±0.2
4.4
0.65max
Resin heap 0.8max
Resin burr 0.3max
ø
3.5±0.1
(2.54)
0.4±0.1
Cathode
28
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3
φ
Inverted-cone LED for surface illumination
SEL2013 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL2013 Series
Tolerance: ±0.3
(Unit: mm)
1.7
1.9
1.9
1.9
2.0
2.0
2.0
SEL2613CS-S
SEL2213C
SEL2813A
SEL2913K
SEL2713K
SEL2413E
SEL2413G
SEL2513E
Transparent light red
Clear
Transparent orange
Transparent light yellow
Transparent yellow
Transparent green
Diffused green
Transparent green
Electrical Optical characteristics (Ta=25°C)
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Red
Amber
Orange
Yellow
Green
Pure green
10
10
10
10
10
10
10
3
3
3
3
3
3
3
80
7.0
8.0
8.0
17
14
12
5.0
20
20
20
20
20
20
20
660
630
610
587
570
560
555
30
35
35
33
30
20
20
GaAlAs
GaAsP
GaP
100
50
50
50
50
50
50
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1.7
3.8
±0.1
0.4
(2.54)
1.0min 25.8min 2.6
±0.1
(1.3)
0.45
±0.1
0.65max
0.45
±0.1
0.65max
Resin heap 1.5max
Resin burr 0.3max
ø
3.1
±0.1
ø
3.1
±0.1
Cathode
0.4
±0.1
1.7
3.8
±0.1
0.4
(2.54)
1.0min 25.8min 2.6
±0.1
(1.3)
Resin heap 1.5max
Resin burr 0.3max
Cathode
0.4
±0.1
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
(Other than GaAlAs chip)
(GaAlAs)
High-
intensity red
29
The following three types of standard lamp casings are provided for the area-illuminating LED (SEL1013 Series):
SEL9100 Casing (Illuminating area: 6.5 × 16.0)
SEL9101 Casing (Illuminating area: 10.0 × 14.0)
SEL9104 Casing (Illuminating area: 7.0 × 18.0)
These casings have tabs to assist positioning during printed wiring board mounting.
Lamp Casings Inverted-cone LED for surface illumination
SEL9100 Lamp Casing SEL9101 Lamp Casing
Design examples of reflective surface
(The figures below show design examples of the reflective surface
of the housing.)
Example of 7 × 10 mm Example of 8 × 16 mm
●The standard housing is designed to accept an area-illuminating LED press-fit from the rear.●
5.2
5.22.5 1.6 4.5 12
6.516.5
8.5
16.0
12.0
8.0
18.0
1.0
3.01.8
4.5
Cathode side
2.5 1.6 4.5 15.5 5.2
10.0
12.0
20.0
12.0
5.2
14.0
16.0
8.0
1.0
3.0
1.8
4.5
Cathode side
5.2
18.0
20.0
5.2
2.5 1.6 4.5 7.0
20.0 9.0
17.0
8.0
1.0
3.0
1.8
4.5
Cathode side
16.0
8.0
8.0
3.0
16.0 Reflective surface Reflective surface
7.0
8.0
3.0
SEL9104 Lamp Casing
30
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3
×
5 Rectangular LED
SEL1021 Series
External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL1021 Series
Tolerance: ±0.3
(Unit: mm)
2.0
1.9
1.9
2.0
2.0
SEL1121R
SEL1821D
SEL1921D
SEL1721Y
SEL1421G
Diffused red
Diffused orange
Diffused orange
Diffused yellow
Diffused green
Electrical Optical characteristics (Ta=25°C)
0.9
3.0
3.8
7.0
12
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
50
50
50
50
50
3
3
3
3
3
10
10
10
10
20
700
610
587
570
560
10
10
10
10
10
100
35
33
30
20
10
10
10
10
10
Deep red
Amber
Orange
Yellow
Green
GaP
GaAsP
GaP
±0.1
±0.2
±0.2
5.0
0.8
0.5
±0.5
±0.2
1.5
±0.2
3.0
3.8
0.8
6.0
(2.0)
0.5
1.1max
Resin heap 1.5max
Resin burr 0.3max
6.0
20.0min
(2.54)
1.0min
±0.2
Cathode mark
±0.1
Cathode
31
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
2.5
×
5 Rectangular LED
SEL1022 Series
External Dimensions
SEL1022 Series
(Unit: mm)
1.9
1.9
1.9
2.0
2.0
SEL1222R
SEL1822D
SEL1922D
SEL1722Y
SEL1722K
SEL1422G
Diffused red
Diffused orange
Diffused orange
Diffused yellow
Transparent yellow
Diffused green
Electrical Optical characteristics (Ta=25°C)
9.0
4.8
4.5
7.8
12
7.2
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
50
50
50
50
50
3
3
3
3
3
20
10
10
10
20
630
610
587
570
560
10
10
10
10
10
35
35
33
30
20
10
10
10
10
10
Red
Amber
Orange
Yellow
Green
GaAsP
GaP
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
Tolerance: ±0.3
20.0min
(2.54)
5.0±0.5 9.0±0.2 4.0±0.2
19.0min 0.8 (1.0) 2.5±0.15
0.5±0.1
1.1max
0.8
5.0±0.2
Cathode 3.0±0.15
32
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL1020 Series
2
×
5 Rectangular LED
SEL1020 Series
(Unit: mm)
SEL1120R
SEL1220R
SEL1820D
SEL1920D
SEL1720Y
SEL1420G
Diffused red
Diffused red
Diffused orange
Diffused orange
Diffused yellow
Diffused green
Electrical Optical characteristics (Ta=25°C)
0.9
4.8
3.0
3.8
7.0
11
10
20
10
10
10
20
700
630
610
587
570
560
10
10
10
10
10
10
100
35
35
33
30
20
10
10
10
10
10
10
2.0
1.9
1.9
1.9
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
10
50
50
50
50
50
50
3
3
3
3
3
3
GaP
GaAsP
GaP
Deep red
Red
Amber
Orange
Yellow
Green
Tolerance: ±0.3
6.06.020.0min1.0min
2.8
5.0
Cathode
(2.54)
2.0
Cathode mark
±0.2
±0.2±0.5
Resin heap 1.5max
(2.0)
±0.2
0.5±0.1
1.1max
±0.2
0.5±0.1
0.8
Resin burr 0.3max
33
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
1
×
5 Rectangular LED
SEL1024 Series
External Dimensions
SEL1024 Series
(Unit: mm)
2.0
1.9
1.9
2.0
2.0
SEL1124R
SEL1824D
SEL1924D
SEL1724Y
SEL1424G
Diffused red
Diffused orange
Diffused orange
Diffused yellow
Diffused green
Electrical Optical characteristics (Ta=25°C)
0.5
4.0
3.0
6.0
15
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
50
50
50
50
50
3
3
3
3
3
10
10
10
10
20
700
610
587
570
560
10
10
10
10
10
100
35
33
30
20
10
10
10
10
10
Deep red
Amber
Orange
Yellow
Green
GaP
GaAsP
GaP
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
Tolerance: ±0.3
±0.1
±0.15 ±0.2
0.8
±0.2
±0.5
1.0min
4.5
4.5
3.2
±0.2
±0.1
Resin burr 0.3min
1.1max
Resin heap 1.5max
4.0
4.9
8.5
1.0
2.8
19.0min
0.5 0.5
(2.54)
0.8
Cathode
34
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
2
×
4 Rectangular LED
SEL4025 Series
External Dimensions
SEL4025 Series
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
(Unit: mm)
1.9
1.9
1.9
2.0
2.0
2.0
SEL4225C
SEL4225R
SEL4825A
SEL4825D
SEL4925A
SEL4925D
SEL4725K
SEL4725Y
SEL4425E
SEL4425G
SEL4525C
Clear
Diffused red
Transparent orange
Diffused orange
Transparent orange
Diffused orange
Transparent yellow
Diffused yellow
Transparent green
Diffused green
Clear
Electrical Optical characteristics (Ta=25°C)
12
5.4
5.4
4.0
4.5
4.0
13
5.0
20
10
6.6
2.5
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
10
50
50
50
50
50
50
3
3
3
3
3
3
20
10
10
10
20
20
630
610
587
570
560
555
10
10
10
10
10
10
35
35
33
30
20
20
10
10
10
10
10
10
Red
Amber
Orange
Yellow
Green
Pure green
GaAsP
GaP
Tolerance: ±0.3
±0.2
Resin burr 0.3max
±0.2
4.0
±0.1
0.4 ±0.1
(2.54)
0.45
0.65max
4.3
Resin heap 0.8max
±0.2
2.0
1.0min
2.3 5.023.0min
Cathode
35
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
2
×
4 Rectangular LED
(Direct Mount)
SEL4026 Series
External Dimensions
SEL4026 Series
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
(Unit: mm)
1.9
1.9
1.9
2.0
2.0
SEL4226C
SEL4226R
SEL4826A
SEL4826D
SEL4926A
SEL4926D
SEL4726K
SEL4726Y
SEL4426E
SEL4426G
Clear
Diffused red
Transparent orange
Diffused orange
Transparent orange
Diffused orange
Transparent yellow
Diffused yellow
Transparent green
Diffused green
Electrical Optical characteristics (Ta=25°C)
12
10
5.4
4.5
6.0
4.5
14.0
8.6
20
14
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
50
50
50
50
50
3
3
3
3
3
20
10
10
10
20
630
610
587
570
560
10
10
10
10
10
35
35
33
30
20
10
10
10
10
10
Red
Amber
Orange
Yellow
Green
GaAsP
GaP
Tolerance: ±0.3
±0.2
±0.2
Resin burr 0.3max
4.0
±0.1
0.4 0.45
0.65max
±0.1
(2.54)
4.3
Resin heap 0.8max
±0.2
2.0
1.0min
2.3 21.0min 7.0
Cathode
36
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
4
φ
Bow-shaped LED
SEL4027 Series
Directivity (Typical)
External Dimensions
SEL4027 Series
(Unit: mm)
1.9
2.0
SEL4227C
SEL4427EP
Clear
Transparent green
Electrical Optical characteristics (Ta=25°C)
15
19
2.5
2.5 10
10 50
50 3
320
20 630
560 10
10 35
20 10
10
Red
Green
GaAsP
GaP
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
Tolerance: ±0.3
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
0.45±0.1
0.4±0.1
0.65max
Resin heap 0.8max
1.0min 23.0min 5.0±0.2
4.0±0.2
Cathode
2.0±0.1
(2.54)
37
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3.1
φ
Bow-shaped LED
SEL4028 Series
Directivity (Typical)
External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL4028 Series
Tolerance: ±0.3
(Unit: mm)
SEL4628C-S
SEL4228C
SEL4828A
SEL4928A
SEL4728K
SEL4428E
SEL4428B-TG
SEL4528C
Clear
Clear
Transparent orange
Transparent orange
Transparent yellow
Transparent green
Transparent dark blue
Clear
Electrical Optical characteristics (Ta=25°C)
200
27
14
14
30
63
18
30
20
20
10
10
10
20
20
20
660
630
610
587
570
560
558
555
10
10
10
10
10
10
10
10
30
35
35
33
30
20
20
20
10
10
10
10
10
10
10
10
1.7
1.9
1.9
1.9
2.0
2.0
2.0
2.0
2.2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
10
10
10
100
50
50
50
50
50
50
50
3
3
3
3
3
3
3
3
GaAlAs
GaAsP
GaP
Red
Amber
Orange
Yellow
Green
Deep green
Pure green
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
(2.54)
4.0
±0.2
2.0
±0.1
±0.2
Resin heap 0.8max
Resin burr 0.3max
5.023.5min1.0min
0.4
±0.1
0.65max
0.45
±0.1
Cathode
3.1
φ
±0.2
High-
intensity red
38
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3.1
φ
Bow-shaped LED
(Direct Mount)
SEL4029 Series
Directivity (Typical)
External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL4029 Series
Tolerance: ±0.3
(Unit: mm)
SEL4229R
SEL4829A
SEL4929A
SEL4729KH
SEL4429E
Diffused red
Transparent orange
Transparent orange
Transparent yellow
Transparent green
Electrical Optical characteristics (Ta=25°C)
21
18
18
60
60
20
10
10
10
20
630
610
587
570
560
10
10
10
10
10
35
35
33
30
20
10
10
10
10
10
1.9
1.9
1.9
2.0
2.0
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
50
50
50
50
50
3
3
3
3
3
GaAsP
GaP
Red
Amber
Orange
Yellow
Green
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
0.45
0.65max
Resin heap 0.8max
1.0min 20.5min 8.0±0.2
3.1±0.2
Cathode
3.0
(1.0)
3.5±0.2
2.4
4.2
(2.54)
0.4±0.1
39
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
4
φ
Bow-shaped LED
(Direct Mount)
SEL6027 Series
Directivity (Typical)
External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL6027Series
(Unit: mm)
SEL6227S
SEL6927A
SEL6427EP
Transparent red
Transparent orange
Transparent green
Electrical Optical characteristics (Ta=25°C)
14
10
26
20
10
20
630
587
560
10
10
10
35
33
20
10
10
10
1.9
1.9
2.0
2.5
2.5
2.5
10
10
10
50
50
50
3
3
3
GaAsP
GaP
Red
Orange
Green
Tolerance: ±0.3
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
±0.2
±0.2
Resin burr 0.3max
4.0
±0.1
0.4 0.45
0.65max
(2.54)
±0.1
0.8
4.4
4.0
±0.2
±0.2
Resin heap 0.8max
±0.2
2.0
1.0min
2.1 4.6
4.9
23.0min
Cathode
40
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
5-mm Pitch Lead Rectangular LED
(Direct Mount)
SEL5020 Series
Directivity (Typical)External Dimensions
SEL5020Series
(Unit: mm)
1.7
1.9
1.9
1.9
2.0
2.0
3.3
SEL5620C
SEL5220S
SEL5820A
SEL5920A
SEL5420E
SEL5520C
SELU5E20C
Clear
Transparent red
Transparent orange
Transparent orange
Transparent green
Clear
Clear
Electrical Optical characteristics (Ta=25°C)
2.2
2.5
2.5
2.5
2.5
2.5
4.0
Red
Amber
Orange
Green
Pure green
10
10
10
10
10
10
10
3
3
3
3
3
3
5
100
20
12
12
20
6.0
60
20
20
20
20
20
20
10
660
630
610
587
560
555
470
30
35
35
33
20
20
35
GaAIAs
GaAsP
GaP
InGaN
50
50
50
50
50
50
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Symbol Unit Rating Condition
GaP/GaAsP/GaAlAs InGaN
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3 5
Top °C−30 to +85 −25 to +80
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
6.2
1.4
3.6
(5.0)
4.2
±0.5
23.0min1.0min
4.2
±0.5
23.0min1.0min
6.0
±0.2
6.0
±0.2
0.5
±0.1
0.65max
Resin heap 0.8max
Resin heap 0.8max
Resin burr 0.3max
Resin burr 0.3max
Cathode
Cathode
3.3
±0.2
0.5
±0.1
3.3
±0.2
0.5
±0.1
Cathode mark
Cathode mark
0.5
±0.1
0.65max
6.2
1.4
3.6
(5.0)
90°
60°
30°0°
90°
60°
30°
050100% 50 100% 90°
60°
30°0°
90
°
60°
30°
050100% 50 100%
Tolerance: ±0.3(Other than GaAlAs chip)
(GaAlAs)
High-
intensity red
Ultra-high-
intensity blue
41
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
5-mm Pitch Lead 3
φ
Lens-type LED
(Direct Mount)
SEL5021 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL5021Series
Tolerance: ±0.3
(Unit: mm)
1.9
1.9
1.9
2.0
2.0
2.0
SEL5221S
SEL5821A
SEL5921A
SEL5721C
SEL5421E
SEL5521C
Transparent red
Transparent orange
Transparent orange
Clear
Transparent green
Clear
Electrical Optical characteristics (Ta=25°C)
2.5
2.5
2.5
2.5
2.5
2.5
Red
Amber
Orange
Yellow
Green
Pure green
10
10
10
10
10
10
3
3
3
3
3
3
35
60
60
90
95
35
20
20
20
20
20
20
630
610
587
570
560
555
35
35
33
30
20
20
GaAsP
GaP
50
50
50
50
50
50
10
10
10
10
10
10
10
10
10
10
10
10
6.2
1.4
3.6
(5.0)
5.8±0.5
23.0min1.0min 3.9
6.0±0.2
0.5+0.1
0.65max
Resin heap 0.8max
Cathode mark
Cathode
0.5±0.1
3.2±0.2
ø
3.0±0.2
Resin burr 0.3max
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
42
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
5-mm Pitch Lead Bow-shaped LED
(Direct Mount)
SEL5023 Series
Directivity (Typical)External Dimensions
SEL5023Series
Tolerance: ±0.3
(Unit: mm)
1.9
1.9
1.9
2.0
2.0
2.0
4.0
SEL5223S
SEL5823A
SEL5923A
SEL5723C
SEL5423E
SEL5523C
SEL5E23C
Transparent red
Transparent orange
Transparent orange
Clear
Transparent green
Clear
Clear
Electrical Optical characteristics (Ta=25°C)
2.5
2.5
2.5
2.5
2.5
2.5
4.8
Red
Amber
Orange
Yellow
Green
Pure green
Blue
10
10
10
10
10
10
10
3
3
3
3
3
3
5
25
35
35
60
40
13
20
20
20
20
20
20
20
20
630
610
587
570
560
555
430
35
35
33
30
20
20
65
GaAsP
GaP
GaN
50
50
50
50
50
50
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
2.0
2.0
2.0
2.0
2.0
2.0
3.6
SELS5223C
SELS5823C
SELU5823C
SELS5B23C
SELS5923C
SELU5723C
SELU5E23C
Clear
Clear
Clear
Clear
Clear
Clear
Clear
●Ultra-high-intensity series
2.5
2.5
2.5
2.5
2.5
2.5
4.0
Red
Amber
Amber
Light amber
Orange
Yellow
Blue
10
10
10
10
10
10
10
4
4
4
4
4
4
5
100
130
185
135
145
155
110
20
20
20
20
20
20
10
635
615
615
600
590
572
470
15
15
15
15
15
15
35
AIGaInP
InGaN
100
100
100
100
100
100
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Symbol Unit Rating Condition
GaP/GaAsP AlGaInP InGaN GaN
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 70 f=1kHz, tw≤100
µ
s
VRV3 4 5
Top °C−30 to +85 −25 to +80
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
6.2
1.4
3.6
(5.0)
5.8±0.5
23.0min1.0min 3.9
0.5+0.1
0.65max
Resin heap 0.8max
Resin burr 0.3max
Cathode mark
Cathode
0.5±0.1
3.6±0.2
6.0±0.2
3.1
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
43
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
5-mm Pitch Lead Egg-shaped LED
(Direct Mount)
SEL5055 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV3
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL5055Series
Tolerance: ±0.3
(Unit: mm)
SEL5255S
SEL5955A
SEL5755C
Electrical Optical characteristics (Ta=25°C)
35
25
140
20
20
20
630
587
570
10
10
10
35
33
30
10
10
10
1.9
1.9
2.0
2.5
2.5
2.5
10
10
10
50
50
50
3
3
3
GaAsP
GaP
Transparent red
Transparent orange
Clear
Red
Orange
Yellow
23.0min (0.3)
1.0min
0.65max
6.2
±0.2
(5.0)
5.6
±0.2
4.55
±0.2
4.65
±0.2
7.3
±0.5
0.5
±0.1
0.5
±0.1
Resin heap 0.8max
Resin burr 0.3max
Cathode
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
44
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV4
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL1016/10016Series
5
φ
Round Standard Bicolor LED
SML1016/10016 Series
(Unit: mm)
2.0
2.0
2.0
2.0
1.9
2.0
1.9
2.0
1.9
2.0
1.9
2.0
SML11516C
SML1516W
SML1216C
SML1216W
SML1816W
SML19416W
Clear
Diffused white
Clear
Diffused white
Diffused white
Diffused white
Absolute maximum ratings (Ta=25°C)
●Common cathode (Internal wiring diagram 1)
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Deep red
Pure green
Deep red
Pure green
Red
Green
Red
Green
Amber
Green
Orange
Green
10
10
10
10
10
10
10
10
10
10
10
10
4
4
4
4
4
4
4
4
4
4
4
4
15
50
6.0
20
65
90
60
60
50
60
45
60
20
20
20
20
20
20
20
20
20
20
20
20
700
555
700
555
630
560
630
560
610
560
587
560
100
20
100
20
35
20
35
20
35
20
33
20
GaP
GaP
GaP
GaP
GaAsP
GaP
GaAsP
GaP
GaAsP
GaP
GaAsP
GaP
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1.7
2.4
1.7
2.4
SML16716CN
SML16716WN
Clear
Diffused white
●Common anode (Internal wiring diagram 2)
2.2
3.0
2.2
3.0
Yellow
Yellow
10
10
10
10
4
4
4
4
100
140
50
70
20
20
20
20
660
570
660
570
30
30
30
30
GaAIAs
GaP
GaAIAs
GaP
10
10
10
10
10
10
10
10
10
10
10
10
1.0min 17.0min 10.6
±0.5
1.5min
2.0
±0.5
7.6
±0.2
1.0
0.5
±0.1
ø
5.8±0.2
(2.54)(2.54)
Resin heap 1.5max
Resin burr 0.3max
ø
5.0±0.2
1.2
0.8
3
–
0.5
±0.1
0.65max
90°
60°
30°0°AB
90°
60°
30°
050100% 50 100%
Tolerance: ±0.3
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
Internal wiring
diagram 1 Internal wiring
diagram 2
AB AB
90°
60°
30°0°AB
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
Transparent
Diffused white
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
High-
intensity red
High-
intensity red
45
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
5
φ
Round Bicolor LED
SML10051 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV4
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SEL10051Series
(Unit: mm)
1.9
2.0
SML12451W
Diffused white
Electrical Optical characteristics (Ta=25°C)
●Common cathode (Internal wiring diagram 1)
2.5
2.5
Red
Green 10
10 4
440
60 20
20 630
560 35
20
GaAsP
GaP
10
10 10
10 10
10
1.7
2.4
SML16751WN
Diffused white
●Common anode (Internal wiring diagram 2)
2.2
3.0Yellow 10
10 4
450
60 20
20 660
570 30
30
GaAlAs
GaP
10
10 10
10 10
10
Resin heap1.5max
17.0min
(2.0)
0.5
±0.1
(2.54)(2.54)
3
–
0.5
±0.1
0.65max
3
–
0.5
±0.1
Resin burr 0.3max
1.0min 1.5min
ø
5.0
±0.2
9.6
±0.2
11.6
±0.5
0.8 1.2
90°
60°
30°0°AB
90°
60°
30°
050100% 50 100%
Tolerance: ±0.3
A
B
A
B
Internal wiring
diagram 1 Internal wiring
diagram 2
AB AB
High-
intensity red
46
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
1.9
2.0
1.9
2.0
SML12460C
SML19460C
2.5
×
5 Rectangular Bicolor LED
SML10060 Series
Clear
Clear
Electrical Optical characteristics (Ta=25°C)
●Common cathode (Internal wiring diagram 1)
10
25
15
25
Directivity (Typical)External Dimensions
SEL10060Series
2.5
2.5
2.5
2.5
10
10
10
10
4
4
4
4
20
20
20
20
630
560
587
560
10
10
10
10
35
20
35
20
10
10
10
10
GaAsP
GaP
GaAsP
GaP
Red
Green
Orange
Green
(Unit: mm)
10
10
10
10
1.7
2.4
SML16760CN
Clear
●Common anode (Internal wiring diagram 2)
2.2
3.0Yellow 10
10 4
430
40 20
20 660
570 30
30
GaAlAs
GaP
10
10 10
10 10
10
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV4
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
0.8
Resin heap 1.5ma
x
0.5
±0.1
5.2
(2.54)(2.54)
Resin burr 0.3max
5.0
±0.2
3
–
0.5
±0.1
0.65max
3
–
0.5
±0.1
2.8
1.2
(2.0)
2.5
±0.2
1.0min
1.5min 17.0min 7.0
±0.5
5.0
±0.2
Tolerance: ±0.3
90°
60°
30°0°AB
90°
60°
30°
050100% 50 100% 90°
60°
30°0°
90°
60°
30°
050100% 50 100%
A
B
A
B
A
B
Internal wiring
diagram 1 Internal wiring
diagram 2
AB AB
High-
intensity red
47
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3.3
×
6 Rectangular Bicolor LED
(Direct Mount)
SML70020 Series
Directivity (Typical)External Dimensions
SEL70020Series
(Unit: mm)
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV4
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
1.9
2.0
1.9
2.0
1.9
2.0
SML72420C
SML78420C
SML79420C
Clear
Clear
Clear
Electrical Optical characteristics (Ta=25°C)
●Common cathode
2.5
2.5
2.5
2.5
2.5
2.5
Red
Green
Amber
Green
Orange
Green
10
10
10
10
10
10
4
4
4
4
4
4
15
20
10
20
10
20
20
20
20
20
20
20
630
560
610
560
587
560
35
20
35
20
33
20
GaAsP
GaP
GaAsP
GaP
GaAsP
GaP
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
3.920.0min1.0min
3.3
0.5+0.1
6.0±0.2
6.2
1.5min
3.6
(2.54)
(2.54)
0.5±0.1
0.65max
Resin heap 1.5max
Resin burr 0.3max
90°
60°
30°0°AB
90°
60°
30°
050100% 50 100% 90°
60°
30°0°
90°
60°
30°
050100% 50 100%
Tolerance: ±0.3
A
B
A
B
A
B
AB
Internal wiring
diagram
48
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3.3
×
6 Bow-shaped Bicolor LED
(Direct Mount)
SML70023 Series
Directivity (Typical)External Dimensions
SEL70023Series
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV4
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
(Unit: mm)
1.9
2.0
1.9
1.9
1.9
2.0
2.0
2.0
1.9
2.0
SML72423C
SML72923C
SML78423C
SMLS79723C
SML79423C
Clear
Clear
Clear
Clear
Clear
Electrical Optical characteristics (Ta=25°C)
●Common cathode
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Red
Green
Red
Orange
Amber
Green
Yellow
Orange
Green
10
10
10
10
10
10
10
10
10
10
4
4
4
4
4
4
4
4
4
4
25
35
25
25
25
35
150
40
25
35
20
20
20
20
20
20
20
20
20
20
630
560
630
587
610
560
590
570
587
560
35
20
35
33
35
20
15
30
33
20
GaAsP
GaP
GaAsP
GaAsP
GaAsP
GaP
AlGaInP
GaP
GaAsP
GaP
10
10
10
10
10
10
100
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
3.920.0min1.0min
3.1
±0.2
0.5
±0.1
6.0
±0.2
6.2
1.5min
3.6
(2.54)
(2.54)
0.5
±0.1
0.65max
Resin heap 1.5max
Resin burr 0.3max
3.6
±0.2
5.8
±0.5
90°
60°
30°0°
BA
90°
60°
30°
050100% 50 100% 90°
60°
30°0°
90°
60°
30°
050100% 50 100%
Tolerance: ±0.3
A
B
A
B
A
B
A
B
A
B
AB
Internal wiring
diagram
Ultra-high-
intensity orange
49
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
Egg-shaped Bicolor LED
(Direct Mount)
SML70055 Series
External Dimensions
SEL70055Series
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 100 f=1kHz, tw≤100
µ
s
VRV4
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
(Unit: mm)
2.0
2.0
1.9
2.0
2.0
2.0
1.9
2.0
1.9
2.0
SMLU72755C
SML72755C
SMLU78755C
SML79255C
SML79455C
Clear
Clear
Clear
Clear
Clear
Electrical Optical characteristics (Ta=25°C)
●Common cathode (Internal wiring diagram 1)
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Red
Yellow
Orange
Red
Orange
Green
10
10
10
10
10
10
10
10
10
10
4
4
4
4
4
4
4
4
4
4
160
170
45
75
280
170
40
45
45
75
20
20
20
20
20
20
20
20
20
20
635
572
630
570
615
572
587
630
587
560
15
15
35
30
15
15
33
35
33
20
AIGaInP
AIGaInP
GaAsP
GaP
AIGaInP
AIGaInP
GaAsP
GaAsP
GaAsP
GaP
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1.7
2.4
SML76755WN
Diffused white
●Common anode (Internal wiring diagram 2)
2.2
3.0Yellow 10
10 4
450
50 20
20 660
570 30
30 GaAlAs
GaP
10
10 10
10 10
10
Tolerance: ±0.3
20.0min (0.3)1.0min 1.5min
(2.54)
(2.54)
0.65max
6.2
±0.2
5.6
±0.2
4.55
±0.2
4.65
±0.2
7.3
±0.5
0.5
±0.1
0.5
±0.1
Reisin heap 0.8max
Reisin burr 0.3max
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
BA
90°
60°
30°
050100% 50 100%
Directivity (Typical)
A
B
A
B
A
B
A
B
A
B
A
B
Internal wiring
diagram 1 Internal wiring
diagram 2
AB AB
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
BA
90°
60°
30°
050100% 50 100%
Transparent
Diffused white
High-
intensity red
Ultra-high-
intensity yellow
Ultra-high-
intensity yellow
Ultra-high-
intensity amber
Ultra-high-
intensity red
50
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3
×
1.5 Surface Mount LED
(Flat Lens)
SEC1001 Series
Directivity (Typical)External Dimensions
SEC1001Series
Tolerance: ±0.3
(Unit: mm)
Symbol Unit Rating Condition
GaP/GaAsP/GaAlAs GaN/InGaN
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 70 f=1kHz, tw≤100
µ
s
VRV4 5
Top °C−30 to +85 −25 to +80
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
2.0
1.7
1.9
1.9
1.9
2.0
2.0
2.0
2.0
3.3
3.3
3.9
SEC1101C
SEC1601C
SEC1201C
SEC1801C
SEC1901C
SEC1701C-YG
SEC1401C
SEC1401E-TG
SEC1501C
SECU1D01C
SECU1E01C
SEC1E01C
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Transparent green
Clear
Clear
Clear
Clear
Electrical Optical characteristics (Ta=25°C)
2.5
2.2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
4.0
4.0
4.8
Deep red
Red
Amber
Orange
Yellow
Green
Deep green
Pure green
Blue
10
10
10
10
10
10
10
10
10
20
20
20
4
4
4
4
4
4
4
4
4
5
5
5
1.5
100
10
16
13
25
22
11
8.0
150
50
6.0
20
20
20
20
20
20
20
20
20
20
20
20
700
660
630
610
587
570
560
558
555
525
470
430
100
30
35
35
33
30
20
20
20
35
35
65
GaP
GaAlAs
GaAsP
GaP
InGaN
GaN
100
100
100
100
100
100
100
100
100
10
10
10
10
10
10
10
10
10
10
10
10
20
20
20
10
10
10
10
10
10
10
10
10
20
20
20
1.5
3.0
Cathode
mark
2.0
1.5
0.9 (0.5)
1.4
Resin P.C.B.
Anode
Cathode
1.6 0.6
1.3
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
High-
intensity red
Ultra-high-intensity
pure green
Ultra-high-
intensity blue
51
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3
×
1.5 Surface Mount LED
(Inner Lens)
SEC1003 Series
Directivity (Typical)External Dimensions
SEC1003Series
Tolerance: ±0.3
(Unit: mm)
1.7
1.9
1.9
1.9
1.9
1.9
1.9
2.0
2.0
2.0
2.0
SEC1603C
SECS1203C
SEC1203C
SECS1803C
SEC1803C
SECS1903C
SEC1903C
SEC1703C
SEC1403C
SEC1403E-TG
SEC1503C
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Transparent green
Clear
Electrical Optical characteristics (Ta=25°C)
2.2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Red
Amber
Orange
Yellow
Green
Deep green
Pure green
10
20
10
3
10
3
10
10
10
10
10
4
4
4
4
4
4
4
4
4
4
4
150
100
15
10
20
10
15
35
33
15
10
20
20
20
3
20
3
20
20
20
20
20
660
635
630
615
610
590
587
570
560
558
555
30
35
35
35
35
35
33
30
20
20
20
GaAlAs
AlGaInP
GaAsP
AlGaInP
GaAsP
AlGaInP
GaAsP
GaP
100
100
100
10
100
10
100
100
100
100
100
10
20
10
3
10
3
10
10
10
10
10
10
20
10
3
10
3
10
10
10
10
10
1.5
3.0
2.0
1.7
1.4 (0.5)0.9
1.6 0.6
1.3
Lens Resin Anode
Cathode
Cathode
mark
P.C.B.
ø
1.0
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 70 f=1kHz, tw≤100
µ
s
VRV4
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
Ultra-high-
intensity amber
Ultra-high-
intensity red
Ultra-high-
intensity orange
High-
intensity red
52
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3
×
2.5 Bicolor Surface Mount LED
(Flat Lens)
SEC2002 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 70 f=1kHz, tw≤100
µ
s
VRV4
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
Tolerance: ±0.3
(Unit: mm)
2.0
1.7
2.0
1.7
2.0
1.9
2.0
1.9
2.0
1.9
2.0
2.0
2.0
2.0
SEC2762C-YG
SEC2462C
SEC2422C
SEC2492C
SEC2592C
SEC2442C
SEC2552C
Electrical Optical characteristics (Ta=25°C)
2.5
2.2
2.5
2.2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Yellow
Green
Green
Red
Green
Orange
Pure green
Orange
Green
Green
Pure green
Pure green
10
10
10
10
10
10
10
10
10
10
10
10
10
10
4
4
4
4
4
4
4
4
4
4
4
4
4
4
20
20
20
20
20
10
20
10
5.0
10
20
20
5.0
5.0
20
20
20
20
20
20
20
20
20
20
20
20
20
20
570
660
560
660
560
630
560
587
555
587
560
560
555
555
30
30
20
30
20
35
20
33
20
33
20
20
20
20
GaP
GaAlAs
GaP
GaAlAs
GaP
GaAsP
GaP
GaAsP
GaP
GaAsP
GaP
GaP
GaP
GaP
100
100
100
100
100
100
100
100
100
100
100
100
100
100
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
SEC2002Series
Clear
Clear
Clear
Clear
Clear
Clear
Clear
2.5
1.5
3.0
2.0
1.5
1.4±0.1
1.01.0
0.90.6±0.1
P.C.B.
Anode
Cathode
Cathode
mark 0.9 (0.5)
Resin 90°
60°
30°0°
90°
60°
30°
050100% 50 100%
A
B
A
B
A
B
A
B
A
B
A
B
A
B
AB
Internal wiring
diagram
High-
intensity red
High-
intensity red
53
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Lens color
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Intensity
IV
Condition
(mcd) IF
typ (mA)
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Chip
material
Emitting color
3
×
2.5 Bicolor Surface Mount LED
(Inner Lens)
SEC2004 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 30
∆IFmA/°C−0.45 Above 25°C
IFP mA 70 f=1kHz, tw≤100
µ
s
VRV4
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
Tolerance: ±0.3
(Unit: mm)
SEC2004Series
2.0
1.7
2.0
1.9
2.0
1.9
2.0
2.0
2.0
2.0
SEC2764C
SEC2484C
SEC2494C
SEC2774C
SEC2554C
Electrical Optical characteristics (Ta=25°C)
2.5
2.2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Yellow
Green
Amber
Green
Orange
Yellow
Yellow
Pure green
Pure green
10
10
10
10
10
10
10
10
10
10
4
4
4
4
4
4
4
4
4
4
50
50
30
20
30
20
50
50
10
10
20
20
20
20
20
20
20
20
20
20
570
660
560
610
560
587
570
570
555
555
30
30
20
35
20
33
30
30
20
20
GaP
GaAlAs
GaP
GaAsP
GaP
GaAsP
GaP
GaP
GaP
GaP
100
100
100
100
100
100
100
100
100
100
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Clear
Clear
Clear
Clear
Clear
2.5
1.5
0.8
1.8
3.0
2.0
1.5
1.4±0.1
1.01.0
0.90.6±0.1
Lens
P.C.B.
Anode
Cathode
Cathode
mark 0.9 (0.5)
Resin 90°
60°
30°0°
90°
60°
30°
050100% 50 100%
A
B
A
B
A
B
A
B
A
B
AB
Internal wiring
diagram
High-
intensity red
54
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Optical Power
Ie
(mW/sr)
typ
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Dimension A
(mm)
Lens color
Condition
5
φ
Round Infrared LED
SID1010M Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 150
∆IFmA/°C−1.33 Above 25°C
IFP mA 1000 f=1kHz, tw≤10
µ
s
VRV5
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SID1010Series
Tolerance: ±0.3
(Unit: mm)
SID1010CM
SID1K10CM
SID1010CXM
SID1K10CXM
Electrical Optical characteristics (Ta=25°C)
130
200
60
110
940
940
940
940
50
50
50
50
50
50
50
50
50
50
50
50
1.3
1.3
1.3
1.3
1.5
1.5
1.5
1.5
50
50
50
50
10
10
10
10
5
5
5
5
GaAs
Clear
Clear
Clear
Clear
(Constant
voltage)
VCC=3V
R=2.2Ω
ø
5.6±0.2 23.0min1.0min A
Cathode
0.65max
Resin heap 1.5max
Resin burr 0.3max
ø
5.0±0.2
0.5±0.1
0.5±0.1
(1.0)
(2.54)
0.5±0.1
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
SID1010M Series SID1010XM Series
7.6 ±0.2
6.9 ±0.2
Chip
material
55
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Optical Power
Ie
(mW/sr)
typ
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Lens color
Condition Chip
material
5
φ
Round Infrared LED
(Direct Mount)
SID1050M Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 150
∆IFmA/°C−1.33 Above 25°C
IFP mA 1000 f=1kHz, tw≤10
µ
s
VRV5
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SID1050Series
Tolerance: ±0.3
(Unit: mm)
SID1050CM
Electrical Optical characteristics (Ta=25°C)
250 940 50 50 501.3 1.5 50 10 5
GaAs
Clear
0.5±0.1
Anode
Cathode
1.0min 21.0min 9.4±0.3
ø
5.0±0.2
Resin heap 0.8max
Resin burr 0.3max
0.65
max
0.5±0.1
0.5±0.1
(2.54)
(Constant voltage)
VCC=3V, R=2.2Ω
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
56
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Optical Power
Ie
(mW/sr)
typ
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Dimension A
(mm)
Lens color
Condition Chip
material
5
φ
Round Infrared LED
SID300/1003 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 150
∆IFmA/°C−1.33 Above 25°C
IFP mA 1000 f=1kHz, tw≤10
µ
s
VRV5
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SID300/1003Series
Tolerance: ±0.3
(Unit: mm)
SID303C
SID313BP
SID1003BQ
SID307BR
SID1G307C
Electrical Optical characteristics (Ta=25°C)
80
130
180
200
50
940
940
940
940
850
50
50
50
50
50
50
50
50
50
40
50
50
50
50
50
1.3
1.3
1.3
1.3
1.5
1.5
1.5
1.5
1.5
1.8
50
50
50
50
50
10
10
10
10
10
5
5
5
5
5
GaAs
Clear
Transparent light purple
Transparent light navy blue
Transparent dark navy blue
Clear
5.6
24.0min 8.5±0.5
Anode
(2.54)
0.6±0.1
1.1max
0.85+0.1
Resin heap 1.5max
0.6±0.1
0.6±0.1
Resin burr 0.3max
ø4.8±0.2
Cathode
2.0min (0.8)A
(Constant
voltage)
VCC=3V
R=2.2Ω
IF=50mA
SID303C SID313BP
SID1003BQ SID307BR
SID1G307C
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
3.0 ±0.5
3.6 ±0.5
4.2 ±0.5
57
Forward voltage
VF
Condition
(V) IF
typ max (mA)
Part
Number
Reverse current
IR
Condition
(
µ
A) VR
max (V)
Optical Power
Ie
(mW/sr)
typ
Peak wavelength
λP
Condition
(nm) IF
typ (mA)
Spectrum half width
∆λ
Condition
(nm) IF
typ (mA)
Lens color
Condition Chip
material
3
φ
Round Infrared LED
SID2010 Series
Directivity (Typical)External Dimensions
Symbol Unit Rating Condition
IFmA 150
∆IFmA/°C−1.33 Above 25°C
IFP mA 1000 f=1kHz, tw≤10
µ
s
VRV5
Top °C−30 to +85
Tstg °C−30 to +100
Absolute maximum ratings (Ta=25°C)
SID2010Series
Tolerance: ±0.3
(Unit: mm)
SID2010C
SID2K10C
Electrical Optical characteristics (Ta=25°C)
7.0
14 940
940 50
50 50
50 50
50
1.3
1.3 1.5
1.5 50
50 10
10 5
5
GaAs
Clear
Clear
IF=50mA
IF=50mA
1.7
ø
3.8
0.4
1.0min 25.8min 3.5±0.1
(1.3)
0.45±0.1
0.65max
Resin burr 0.3max
Resin heap 1.5max
ø
3.1±0.1
Cathode
(2.54)
0.4±0.1
90°
60°
30°0°
90°
60°
30°
050100% 50 100%
58
Characteristic Curves
Spectral distribution
Light color
Chip material
Peak Wavelength(nm)
qUltra-high-intensity blue InGaN 470
w
Ultra-high-intensity pure green
InGaN 525
e
Ultra-high-intensity yellow
AlGaInP 572
r
Ultra-high-intensity orange
AlGaInP 590
t
Ultra-high-intensity light amber
AlGaInP 600
y
Ultra-high-intensity amber
AlGaInP 615
uUltra-high-intensity red AlGaInP 635
Light color
Chip material
Peak Wavelength(nm)
qBlue GaN 430
wPure green GaP 555
eGreen/deep green GaP 560/558
rYellow GaP 570
tOrange GaAsP 587
yAmber GaAsP 610
uRed GaAsP 630
iHigh-intensity red GaAlAs 660
oDeep red GaP 700
●Ultra-high-intensity type
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0 380
Relative emission intensity
400 420 440
q wer t y u i o
460 480 500 520 540 560 580 600
Wavelength [nm]
620 640 660 680 700 720 740 760 780 800
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0 380
Relative emission intensity
400 420 440
qwertyu
460 480 500 520 540 560 580 600
Wavelength [nm]
620 640 660 680 700 720 740 760 780 800
●Standard type
59
Characteristic Curves
■ Relative intensity - IF characteristic
0.1
1
0.011 100
10
10
Relative intensity
Forward current IF [mA]
0.1
1
0.011 100
10
10
Relative intensity
Forward current IF [mA]
0.1
1
0.011 100
Forward current IF [mA]
Deep red
Green/yellow
Relative intensity
10
10
0.1
1
0.011 100
10
10
Amber/orange
Red
Forward current IF [mA]
Relative intensity
0.1
1
0.011 100
10
10
Relative intensity
Forward current IF [mA]
GaP GaAsP GaAlAs
GaN AlGaInP InGaN
0.1
1
0.011 100
10
10
Forward current [mA]
Relative intensity
■ IF - VF characteristic
GaP GaAsP GaAlAs
GaN AlGaInP InGaN
100
10
1
Forward current IF [mA]
2.4 2.6
Forward voltage VF [V]
1.6 1.8 2.0 2.2
100
10
1
1.6 1.8 2.0 2.2 2.4 2.6
Forward current IF [mA]
Forward voltage VF [V]
100
10
1
1.6 1.8 2.22.0 2.4 2.6
Forward current IF [mA]
Forward voltage VF [V]
100
10
1
1.6 2.4 3.2 4.0 4.8
Forward current IF [mA]
Forward voltage VF [V]
100
10
1
1.6 1.8 2.0 2.2 2.4 2.6
Orange
Yellow
Amber Light amber
Forward current IF [mA]
Forward voltage VF [V]
Red
100
10
1
1.6 2.4 3.2 4.0 4.8
Forward current IF [mA]
Forward voltage VF [V]
60
Characteristic Curves
IFP - Ie characteristic VFP - IFP characteristic
0.1
1
0.01
0.0011 100 1000
Pulse forward current IFP [mA]
Relative optical output Ie
100
10
10
Pulse width = 1ms
Duty≤10%
1000
1
1.0 1.8 2.01.6
Pulse forward voltage VFP [V]
Pulse forward current IFP [mA]
100
10
1.41.2
Pulse width = 1ms
Duty≤10%
10
0.1
–30 75 8550
Ambient temperature Ta (°C)
Relative optical output Ie
5
2
1
0.2
0.5
250
IF=50mA
1000
2000
1001
1s
500ms
50 10010
Duty ratio D (%)
Acceptable forward pulse current I
FP
(mA)
5
100ms
50ms
10ms
5ms
1ms
PW=10 s
µ
1000
2000
10010 100 1m 10m 100m 1
Pulse width PW (s)
Forward pulse current IFP (mA)
D=10%
D=20%
D=50%
D=1%
D=2%
D=5%
µµ
00 80 10060
Ambient temperature Ta (°C)
Acceptable forward current IF (mA)
120
40
20
80
100
60
4020
750 850 950
1.0
0.8
0.6
0.4
0.2
0900
Wavelength λ (nm)
800 1000
Optical output (Relative value)
Ie - Ta characteristic
IFP - DR characteristic IFP - PW characteristic IF - Ta characteristic
Spectral distribution
■ Infrared LED
61
Taping Specifications
H
1
5.0
2.54
H
0
Lamp Types
1.Straight type
5.0
H
0
2. Forming (5 mm pitch) type
Forming standard shapeStraight standard shape
(5 mm pitch lead) Bicolor straight standard shapeStraight standard shape
5.0
H
0
Taping compatibility table
TP1 TP2 TP3 TP6 TP7 TP8 TP19 TP4 TP5 TP15 TP16 TP17 TP18 TH8F
TH10D TH12E
4.5 7.5 6.0 3.5 5.0 9.0 7.4 17.0 20.5 20.5 19.0 23.5 25.0
SEL1010
OO OO
2500 10
SEL1010M
OOO OOO
2500 11
SEL1010XM
OOO OOO
2500 12
SEL1050M
OOO OOO O
2500 13
SEL1015
OO OO
2500 14
SEL1011
OO OO
2500 15
SEL1053M 2500 16
SEL4010
OO OO
3000 17
SEL4014
OOO OOO O
3000 18
SEL6010
Use SEL2010 OOO
4000 19
SEL6014
OO OO O
4000 20
SEL6015
Use SEL2015 O
4000 21
SEL2010
OOO OOO
4000 22
SEL2015
OOO OOO
4000 23
SEL2011
OOO OOO
4000 24
SEL4017
OOO OOO
4000 25
SEL1013
OO OO
2500 26
SEL6013
Use SEL2013 O
4000 27
SEL2013
OOO OOO
4000 28
SEL1021
OO OO
2500 30
SEL1022
OO OO
2500 31
SEL1020
OO OO
3000 32
SEL1024
OO OO
3000 33
SEL4025
OOO OOO
6000 34
SEL4026
OOO OOO O
6000 35
SEL4027
OOO OOO
6000 36
SEL4028
OOO OOO
6000 37
SEL4029
OOO OOO
6000 38
SEL6027
Use SEL4027 O
6000 39
SEL5020
OO
4000 40
SEL5021
O
4000 41
SEL5023
O
4000 42
SEL5055
O
4000 43
SML1016/10016
O
2500 44
SML10051
O
2500 45
SML10060
O
6000 46
SML70020
O
4000 47
SML70023
O
4000 48
SML70055
O
3000 49
SID1010
OOO OOO
2500 54
SID1050
OOO OOO O
2500 55
SID300/1003
OOO
2000 56
SID2010 3000 57
Taping shape (unit: mm)
Taping No.⇒
H1 or H0 dimension
⇒
Forming (5 mm pitch) type
* The package contents for taping with holder are 1200.
With holder*Series name Straight type
Package
contents
Page
62
Features
• This taping format saves the customer the trouble of attaching a holder.
• Any available inserter can be used with the 5 mm lead pitch radial taping.
See the previous page for the product names and package contents (standard per box).
TH12E
12.7
±1.0
6.0
7.5
6.35
±0.5
±2.0
18.0
+1.0
–0.5
17.5
+1.0
–0.5
MAX 11
9.0
±0.5
ø
4.0
±0.2
Holder
Tape
Marking (Black)
MIN
0.3
0.45
±0.1
3.85
±0.5
±2.0
(Po)
12.7
±0.2
0.4
±0.1
MIN 13.0
29.5
+1.0
–0.5
Paperboard
Product tilt
5.0
±0.5
0.7
±0.2
4.0
12.7±1.0
6.35±0.5
±2.0
18.0+1.0
–0.5 17.5+1.0
–0.5
MAX 11
9.0±0.5
ø
4.0±0.2
Holder
Marking (Black)
MIN
0.3
0.7±0.2
0.45±0.1
3.85±0.5
±2.0
(Po)12.7±0.2
0.4±0.1
MIN 13.0
27.5+1.0
–0.5
5.0±0.5
6.0
7.5
4.0
Tape
Paperboard
Product tilt
12.7
±1.0
(P)
6.35
±0.5
(t)
0.7
±0.2
6.0
0.5
8.4
6.0
4.0
13min
18.0
+1.0
–0.5
18.0
±1
11.0max
9.0
±0.5
(P0)
12.7
±0.2
ø
4.0
±0.2
Tape
Marking (black)
0.3min
5.0
±0.5
7.2
8.0
0
±2.0
0
±2.0
Product tilt
(P
2
)
Cathode
Paperboard
TH10D
TH8F Po: The cumulative pitch error is ±1.0 mm per 20.
Dimensional tolerance: ±0.3
Unit: mm
Taping Specifications
Taping with holder
63
Taping Specifications
0.2±0.05
Cathode
ø
1.5+0.1
0
1.9 4.0 2.0±0.05 4.0
3.5±0.05 1.75
8.0
0.2±0.05
Cathode
ø
1.5+0.1
0
1.9 4.0 2.0±0.05 4.0
3.5±0.05 1.75
8.0
ø180
+0
2.0±0.2
Label
Label
Rank
ø60
+1
ø22
–3
–0
ø10
30°
P/N, Manufacturing
Date Code No, Q’ ty
11.4
±1.0
9.0
±0.3
General tolerance: ±0.2
ø13
±0.2
H
0
Chip type
Reel specificationsSingle-color SEC1001/1003 Series
Bicolor SEC2002/2004 Series
Package contents: 3000
64
Part Number Substitute
SEL1112R SEL4117R
SEL1120RKT SEL1120R
SEL1123R SEL1124R
SEL1131R −
SEL1132R −
SEL1134R −
SEL1142R −
SEL1213CM SEL1213C
SEL1215R −
SEL1310E SEL1410E
SEL1310G SEL1410G
SEL1311G SEL1411G
SEL1312G SEL4417G
SEL1320G SEL1420G
SEL1321G SEL1421G
SEL1323G SEL1424G
SEL1324G SEL1424G
SEL1331G −
SEL1332G −
SEL1334G −
SEL1342G −
SEL1420GW −
SEL152R −
SEL1650CM −
SEL1723Y SEL1724Y
SEL1731Y −
SEL1742Y −
SEL1820W −
SEL1823D SEL1824D
SEL1842D −
SEL1915C −
SEL1923D SEL1924D
SEL1942D −
SEL1E10CM SELU1E10CXM/SELU1E50CM
SEL2111W −
SEL2111W −
SEL2215RM SEL2215R
SEL2310E SEL2410E
SEL2310G SEL2410G
SEL2311G SEL2411G
SEL2710E −
SEL2915DM SEL2915D
SEL3110R SEL2110R/SEL6210R
SEL3110S SEL2110S/SEL6210S
SEL3210R SEL2210R/SEL6210R
SEL3210S SEL2210S/SEL6210S
SEL3213C SEL2213C
SEL3410E SEL2410E/SEL6410E
SEL3410G SEL2410G
SEL3413E SEL2413E
Part Number Substitute
SEL3510C SEL2510C/SEL6510C
SEL3510G SEL2510G/SEL6510G
SEL352G −
SEL3710K SEL2710K/SEL6710K
SEL3710Y SEL2710Y/SEL6710Y
SEL3713K SEL2713K
SEL3810A SEL2910A/SEL6810A
SEL3810D SEL2910D/SEL6810D
SEL3813A SEL2813A
SEL3910A SEL2910A/SEL6910A
SEL3910D SEL2910D/SEL6910D
SEL3913K SEL2913K
SEL3E10C SELU2E10C
SEL4110RT SEL4110R
SEL4210RT SEL4210R
SEL4225RM SEL4225R
SEL4310E SEL4410E
SEL4310G SEL4410G
SEL4425GM SEL4425G
SEL4427E SEL4427EP
SEL4725CM −
SEL4814W −
SEL550ST −
SEL650ST −
SEL8301A −
SEL8302A −
SEL8701Y −
SEL8701YB −
SID1010BXM −
SID1010CM2 −
SID1H10CXM −
SID1K10CM2 −
SID1K10CM2 −
SLH30 −
SLH50 −
SLS34 −
SLS36 −
SLS54 −
List of Discontinued Products
Bulletin No
L01 EB0
(Jan,2001)
CMYK
Sanken Electric Co.,Ltd.
1-11-1 Nishi -Ikebukuro,Toshima-ku, Tokyo
PHONE: 03-3986-6164
FAX: 03-3986-8637
TELEX: 0272-2323(SANKEN J)
Overseas Sales Offices
Asia
Sanken Electric Singapore Pte.Ltd.
150 Beach Road,#14-03 The Gateway West,
Singapore 0718
PHONE: 291-4755
FAX: 297-1744
Sanken Electric Hong Kong Co.,Ltd.
1018 Ocean Centre, Canton Road,
Kowloon, Hong Kong
PHONE: 2735-5262
FAX: 2735-5494
TELEX: 45498 (SANKEN HX)
Sanken Electric Korea Co.,Ltd.
SK Life B/D 6F,
168 Kongduk-dong, Mapo-ku, Seoul, 121-705, Korea
PHONE: 82-2-714-3700
FAX: 82-2-3272-2145
North America
Allegro MicroSystems,Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615, U.S.A.
PHONE: (508)853-5000
FAX: (508)853-7861
Europe
Allegro MicroSystems Europe Limited.
Balfour House, Churchfield Road,
Walton-on-Thames, Surrey KT12 2TD, U.K.
PHONE: 01932-253355
FAX: 01932-246622
PRINTED in JAPAN H1-L01EB0-0101040ND
