ULN2003V12, ULN2003F12 Multi-Channel Relay and Inductive Load Sink Driver Description Pin Assignments The ULN2003V12 and ULN2003F12 are multi-channel sink drivers comprised of 7-channel and 4-channel output stages respectively. The ULN2003V12 sink driver features 7 low output impedance drivers that minimize on-chip power dissipation and an actual low power upgrade version for popular ULN2003A family in real applications. When driving a typical 12V relay coil, a ULN2003V12 will dissipate 12 times lower power compared to ULN2003A. ULN2003F12 is a lower power variant benefiting from fewer channel integration and a better fit for applications requiring only 4-channel drivers, such as driving low voltage stepping motors, etc. ( Top View ) IN1 1 The ULN2003V12 and ULN2003F12 both support 3.3V to 5V CMOS logic input interface, thus making it compatible to a wide range of micro-controllers and other logic interfaces, and also feature an improved input interface that minimizes the input DC current drawn from the external drivers. The input RC snubber circuit integrated at ULN2003V12 and ULN2003F12 improves the performance in noisy operating conditions, and the internal pull-down resistor at input stage helps allow input logic to be tri-stated. IN2 2 IN3 3 16 OUT1 15 OUT2 14 OUT3 IN4 4 13 OUT4 IN5 5 12 OUT5 11 OUT6 10 OUT7 IN6 6 7 GND 8 COM 9 SO-16 / TSSOP-16 (Top View) As shown in the Functional Diagram, each output of the ULN2003V12 and ULN2003F12 features an internal free-wheeling diode connected in a common-cathode configuration at the COM pin which provides flexibility of increasing current sink capability through combining several adjacent channels in parallel. Under typical conditions the ULN2003V12 can support up to 1.0A of load current when all 7channels are connected in parallel. IN1 1 10 OUT1 IN2 2 9 OUT2 IN3 3 8 OUT3 IN4 4 7 OUT4 GND 5 6 COM U-DFN3030-10 Features Applications * * * * * * * * * * * * * * 4- and 7-Channel High Current Sink Drivers Supports up to 20V Output Pull-up Voltage Low Output VOL of 0.6V (Typical) with * 100mA (Typ.) Current Sink per Channel at 3.3V Logic Input * 140mA (Typ.) Current Sink per Channel at 5.0V Logic Input Compatible to 3.3V and 5.0V Micro-Controllers and Logic Interface Internal Free-wheeling Diodes for Inductive Kick-back Protection Input Pull-down Resistors Allows Tri-Stating the Input Driver Input RC-Snubber to Eliminate Spurious Operation in Noisy Environments ESD: 4kV HBM, 1kV CDM Available in 16-Pin SOIC, 16-Pin TSSOP and 10-Pin DFN3030 packages Available in "Green" Molding Compound (No Br, Sb) Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Notes: Inputs Compatible with Popular Logic Types Relay Driver Applications Stepping Motor Applications Logic Level Shifter 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. ULN2003V12, ULN2003F12 Document number: DS37620 Rev. 1 - 2 1 of 8 www.diodes.com February 2015 (c) Diodes Incorporated ULN2003V12, ULN2003F12 Functional Diagram IN1 1 16 OUT1 IN2 2 15 OUT2 IN3 3 14 OUT3 IN4 4 13 OUT4 IN5 5 12 OUT5 IN6 6 11 OUT6 IN7 7 IN1 1 10 OUT1 IN2 2 9 OUT2 IN3 3 8 OUT3 IN4 4 7 OUT4 5 COM 10 OUT7 9 COM ULN2003F12 ULN2003V12 Pin Descriptions Pin Name Pin Number Description SO16 TSSOP16 DFN3030-10 IN1 ~ IN7 1~7 1~7 1~4 GND 8 8 5 Ground Reference Pin COM 9 9 6 Internal Free-Wheeling Diode Common Cathode Pin OUT7 ~ OUT1 10~16 10~16 7~10 Logic Input Pins IN1 through IN7 Channel Output Pins OUT7 through OUT1 Functional Block Diagram (Single Channel) ULN2003V12, ULN2003F12 Document number: DS37620 Rev. 1 - 2 2 of 8 www.diodes.com February 2015 (c) Diodes Incorporated ULN2003V12, ULN2003F12 Absolute Maximum Ratings (@TA = +25C, unless otherwise specified.) Symbol VIN Rating Parameter Pin2 IN1~IN7 to GND Voltage MIN MAX Unit -0.3 5.5 V VOUT Pins OUT1~OUT7 to GND Voltage 20 V VCOM Pin COM to GND Voltage 20 V Max GND-Pin Continuous Current (+100C <TJ < +125C) 700 mA Max GND-Pin Continuous Current (TJ < +100C) 1.0 A IGND PD JA JC ESD TJ TSTG Notes: Total Device Power Dissipation at TA = +85C Thermal Resistance Junction-to-Ambient (Note 6) Thermal Resistance Junction-to-Case (Note 7) 16 Pin - SOIC 16 Pin - TSSOP TBD TBD W W 10 Pin - DFN3030 TBD W 16 Pin - SOIC TBD 16 Pin - TSSOP TBD 10 Pin - DFN3030 TBD 16 Pin - SOIC 16 Pin - TSSOP TBD TBD 10 Pin - DFN3030 TBD C/W C/W HBM 4 kV CDM 1 kV Junction Temperature -55 150 C Storage Temperature -55 150 C 4. Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only. Functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 5. All voltage values are with respect to the emitter/substrate terminal E, unless otherwise noted. 6. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of +150C can affect reliability. 7. Maximum power dissipation is a function of TJ(max), JC, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TC)/JA. Operating at the absolute maximum TJ of +150C can affect reliability. Recommended Operating Conditions (@TA = +25C, unless otherwise specified.) Symbol Parameter VOUT Channel Off-Stage Output Pull-Up Voltage VCOM COM Pin Voltage IOUT(ON) TJ Per Channel Continuous Sink Current Document number: DS37620 Rev. 1 - 2 TYP Max Unit 16 V V 16 VINx = 3.3V 100(5) VINx = 5.0V -40 140(5) 125 Operating Junction Temperature ULN2003V12, ULN2003F12 Min 3 of 8 www.diodes.com mA C February 2015 (c) Diodes Incorporated ULN2003V12, ULN2003F12 Electrical Characteristics (@TA = +25C, unless otherwise specified.) Specified over the recommended junction temperature range T J = -40C to +125C and over recommended operating conditions unless otherwise noted. Typical values are at TJ = +25C. Parameter INPUTS IN1 THROUGH IN7 PARAMETERS Test conditions Min Typ. Max Unit VI(on) IN1~IN7 logic high input voltage VCE = 2V, IC = 300mA 1.65 V VI(OFF) IN1~IN7 logic low input voltage II = 250A, IC = 100mA 0.6 V II(ON) IN1~IN7 ON state input current IF = 350mA 12 25 uA II(OFF) IN1~IN7 OFF state input leakage 250 nA VINX = 3.3V, IOUTX = 20mA 0.12 0.15 VINX = 3.3V, IOUTX = 100mA 0.6 0.75 VINX = 5.0V, IOUTX = 20mA 0.09 0.11 OUTPUTS OUT1 THROUGH OUT7 PARAMETERS VOL(VCE-SAT) IOUT(ON) OUT1~OUT7 low-level output voltage OUT1~OUT7 ON-state continuous current at VOUTX = 0.6V IOUT(ON) OUT1~OUT7 OFF-state leakage current SWITCHING PARAMETERS tPHL OUT1~OUT7 logic high propagation delay tPLH OUT1~OUT7 logic low propagation delay tCHANNEL Channel to channel delay RPD IN1~IN7 input pull-down resistance IN1~IN7 input filter time constant COUT OUT1~OUT7 output capacitance FREE-WHEELING DIODE PARAMETERS VF Forward voltage drop IF-peak Diode peak forward current ULN2003V12, ULN2003F12 Document number: DS37620 Rev. 1 - 2 V VINX = 5.0V, IOUTX = 140mA 0.6 0.75 VINX = 3.3V, VOUTX = 0.6V 80 100 VINX = 5.0V, VOUTX = 0.6V 95 140 VINX = 0V, VOUTX = VCOM =16V 0.5 uA 50 70 ns 121 140 ns Over recommended operating conditions and with same test conditions on channels. 15 50 ns 210k 300k 390k VINX = 3.3V, Vpull-up = 12V, Rpull-up = 1k VINX = 3.3V, Vpull-up = 12V, Rpull-up = 1k mA VINX = 3.3V, VOUTX = 0.4V 9 ns 15 pF IF-peak = 140mA, VF = VOUTx -VCOM 1.2 V 140 mA 4 of 8 www.diodes.com February 2015 (c) Diodes Incorporated ULN2003V12, ULN2003F12 Performance Characteristics Output Current vs. Input Voltage (One Darlington) Output Current vs. Input Voltage (All Darlingtons in Parallel) 400 2.0 ULN2003V12 ULN2003F12 350 1.5 Output Current (A) 300 Output Current (mA) ULN2003V12 ULN2003F12 250 200 150 TA = 25 C 100 VOUT = 0.6 V O 50 1.0 0.5 O TA = 25 C VOUT = 0.6 V 0.0 0 -50 0 1 2 3 4 5 6 -0.5 0 1 2 Input Voltage (V) Output Current vs. Output Voltage 6 ULN2003F12 600 Output Current (mA) Output Current (mA) 5 700 ULN2003V12 600 500 400 O 300 TA = 25 C VIN = 3.3 V 200 VIN = 5.0 V 0.5 1.0 1.5 2.0 2.5 3.0 3.5 500 400 300 O 4.0 0 0.0 Output Voltage (V) ULN2003V12, ULN2003F12 Document number: DS37620 Rev. 1 - 2 TA = 25 C 200 VIN = 3.3 V VIN = 5.0 V 100 100 0 0.0 4 Output Current vs. Output Voltage 800 700 3 Input Voltage (V) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Output Voltage (V) 5 of 8 www.diodes.com February 2015 (c) Diodes Incorporated ULN2003V12, ULN2003F12 Performance Characteristics (Cont.) Output Current vs. Output Voltage Diode Forward Voltage vs. Diode Forward Current 2.5 1.4 O O TA = 25 C VIN = 0 V Diode Forward Voltage (V) Output Current (A) 2.0 VCOM = VCC 1.5 1.0 0.5 0.0 0 TA = 25 C 1.2 4 8 12 16 20 1.0 0.8 0.6 0.4 0.2 0.0 0 Output Voltage (V) 25 50 75 100 125 150 175 200 Diode Forward Current (mA) Diode Reverse Current vs. Diode Reverse Voltage 3.0 O TA = 25 C Diode Reverse Current (A) 2.5 2.0 1.5 1.0 0.5 0.0 -0.5 0 5 10 15 20 25 30 Diode Reverse Voltage (V) ULN2003V12, ULN2003F12 Document number: DS37620 Rev. 1 - 2 6 of 8 www.diodes.com February 2015 (c) Diodes Incorporated ULN2003V12, ULN2003F12 Ordering Information ULN2003 XXX XXX - X Device Device Package Packing V12 : 7 Channels F12 : 4 Channels S16 : SO-16 T16 : TSSOP-16 FN : U-DFN3030-10 7/13 : Tape & Reel Package Code Packaging (Note 11) S16 T16 FN SO-16 TSSOP-16 DFN3030-10 ULN2003V12S16-13 ULN2003V12T16-13 ULN2003F12FN-7 Note: 7"/13" Tape and Reel Part Number Suffix Quantity 2,500/Tape & Reel 2,500/Tape & Reel 3,000/Tape & Reel -13 -13 -7 8. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Marking Information (1) SO-16 and TSSOP-16 ( Top View ) 16 9 YY : Year : 08, 09,10~ WW : Week : 01~52; 52 represents 52 and 53 week XX : Internal Code Logo Part Number ULN2003XXX YY WW X X Device: V12 : 7 Channels F12 : 4 Channels 1 8 (2) DFN3030-10 ( Top View ) XX YW X ULN2003V12, ULN2003F12 Document number: DS37620 Rev. 1 - 2 XX : Identification Code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : Internal Code Part Number Package Identification Code ULN2003F12FN-7 DFN3030-10 A3 7 of 8 www.diodes.com February 2015 (c) Diodes Incorporated ULN2003V12, ULN2003F12 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2015, Diodes Incorporated www.diodes.com ULN2003V12, ULN2003F12 Document number: DS37620 Rev. 1 - 2 8 of 8 www.diodes.com February 2015 (c) Diodes Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Diodes Incorporated: ULN2003F12FN-7