LL Series Aluminum Electrolytic Capacitors (Low Leakage Current) MERITEK FEATURES Standard low leakage current series Suitable for Hi-Fi pre-amplifiers and TV oscillation loop circuits. SPECIFICATIONS Item Characteristic Operating Temp Range - 40 ~ +85C Rated Working Voltage 10 ~ 63VDC Capacitance Tolerance (120Hz 20C) Leakage Current 20%(M) +30%/ -10% (Q) I 0.004CV or 0.4 (A) (20C) Under 1k resister series and rated voltage applied Whichever is greater after 1 minute Surge Voltage I : Leakage Current (A) C : Rated Capacitance(F) V : Working Voltage (V) W.V. 10 16 25 35 50 63 (20C) S.V. 13 20 32 44 63 79 Dissipation Factor ( tan ) (120Hz 20C) W.V. 10 16 25 35 50 63 tan 0.20 0.16 0.14 0.12 0.10 0.10 Low Temperature Stability Load Life Shelf Life Impedance ratio at 120Hz Rated Voltage (V) 10 16 25 35 50 63 -25C / +20C 4 4 4 4 4 4 -40C / +20C 8 8 8 8 8 8 After 2000 hours application of W.V. and +85C ripple current value , the capacitor shall meet the following limits. ( DC + ripple peak voltage rated working voltage ) Capacitance Change 15% of initial. Dissipation Factor 150% of initial specified value Leakage Current initial specified value At +85C no voltage application after 1000 hours the capacitor shall meet the limits for load life characteristics. ( with voltage treatment ) PART NUMBER SYSTEM DIMENSIONS (mm) LL 16V 221 M TR 10x20 Meritek Series Rated Voltage Rated Capacitance Express in micro farad(uF), First two digits are significant figures, Third digit denotes number of zeros. `R' denotes decimal point for values less than 10uF Tolerance M - 20%, Q - +30/-10% Package Code TA TR Tape & Ammo Tape & Reel Blank Case size - (D) Diameter x (L) Length in mm (Optional) D F d a 5 2.0 0.5 1.5 6.3 2.5 0.5 1.5 8 3.5 0.6 1.5 10 5.0 0.6 1.5 12.5 5.0 0.6 1.5 Rev. 7 Aluminum Electrolytic Capacitors LL Series (Low Leakage Current) MERITEK CASE SIZE & MAX RIPPLE CURRENT Case size Max. ripple current V Cap. (uF) Item 4.7 10 22 33 47 100 220 330 470 1000 V Cap. (uF) Item 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 10 16 DxL R.C. DxL 5x11 6.3x11 6.3x11 8x11.5 10x16 10x20 12.5x20 12.5x25 65 90 110 180 310 420 500 810 5x11 6.3x11 6.3x11 8x11.5 10x12.5 10x20 12.5x20 12.5x20 R.C. 38 65 110 140 170 300 490 DxL 5x11 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 8x11.5 10x12.5 10x16 10x16 12.5x20 35 DxL 5x11 6.3x11 8x11.5 10x12.5 10x12.5 10x20 12.5x25 : DxL : mA(rms) (mm) 85C 120Hz 25 R.C. 48 80 100 140 210 390 470 560 DxL 5x11 6.3x11 8x11.5 8x11.5 10x12.5 10x16 12.5x20 12.5x25 R.C. 6 9 11 13 19 29 35 48 80 130 170 210 330 DxL 5x11 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 8x11.5 10x16 10x16 10x20 12.5x25 50 R.C. 36 60 100 130 160 250 410 560 63 R.C. 6 9 11 13 19 29 35 48 80 140 170 230 360 All blank voltage on sleeve marking is the same voltage as "" point to. Rev. 7