METALLIZED POLYPROPYLENE IGBT SNUBBER CAPACITORS 926 SERIES (R) The new 926 Series IGBT Snubber mounting configurations, voltages Capacitors were designed for AC and and capacitances for snubber capacitor pulse applications. A wide range of models not shown. Special designs rectangular epoxy case sizes are can be manufactured to meet any available with tinned copper lugs. existing or future requirement. For Wrap and fill design is also available specific information on your product on special order. needs, contact your local sales repre- Extended metallized polypropylene is used as the dielectric material. sentative or Electrocube directly. The potting material and endfills of Electrocube recognizes and supports Electrocube's capacitors meet or exceed the circuit design needs for specific the flammability requirements of UL94VO. Dimensional variations for all MFD values are available with the same volume to meet your design requirements. SPECIFICATIONS NOTES: For information regarding insulating sleeves, mountings, special terminals, non-standard leads, circuit connections and other hardware, please consult factory. For styles and ratings not shown, or for unusual requirements necessitated by special circuit applications (including higher IR or lower DF), consult the factory direct. All Electrocube film capacitors have endfills and tape that meet or exceed the flammability requirements of UL94V0. (R) % CAPACITANCE CHANGE TYPICAL DIELECTRIC CHARACTERISTIC CURVES % DISSIPATION FACTOR with 50% voltage derating. Dielectric Voltage Test: Will withstand the application of 150% rated DC voltage for a period not to exceed 1 minute at 25C; current limited to 5 mA. DC Life Test: Will withstand the application of 125% rated VDC at 85C for 1000 hours, with not more than 1 failure in 12 permitted; current limited to 5 mA. Dissipation Factor: Shall not exceed 0.1% at 25C. for values to 1 mfd; 0.2% for values over 1 mfd. Dielectric Absorption: Shall not exceed 0.1% at 25C. per MIL-C-19978. Acceptance Criteria: Measurement frequency for capacitance and dissipation factor shall be 1000 Hz for values less than 1 mfd and 120 Hz for values of 1.0 mfd and up. Self Inductance: The unique lead design and attachment, coupled with precision assembly create a series of parts that have maximum self inductance of 15 nh. Insulation Resistance: At rated voltage or 500V, whichever is less, units shall meet the minimum values below: INSULATION RESISTANCE (MEGOHMS TIMES MICROFARADS) Temperature: -55C to +85C at rated voltage; to +105C 3366 Pomona Blvd. * Pomona, CA 91768 * TEL: (909) 595-4037 * FAX: (909) 595-0186 e-mail: esales@electrocube.com * Internet: www.electrocube.com * (A: 5/00) METALLIZED POLYPROPYLENE IGBT SNUBBER CAPACITORS 926 SERIES (R) SERIES NO. 926B (R) DESCRIPTION FLAME RETARDANT IGBT SNUBBER CAPACITORS 3366 Pomona Blvd. * Pomona, CA 91768 * TEL: (909) 595-4037 * FAX: (909) 595-0186 e-mail: esales@electrocube.com * Internet: www.electrocube.com * (IR: 9/99) METALLIZED POLYPROPYLENE IGBT SNUBBER CAPACITORS 926B SERIES (R) EPOXY CASE RECTANGULAR * Interchangeable with Cornell Dubilier * High peak and RMS current capability * Low inductance * 85C. ambient temperature * Competitive pricing * Custom configurations available; Style SCD * Mounts directly to the IGBT module * Low loss polypropylene dielectric * Meets or exceeds flammability requirements of UL94VO CDE PART NUMBER SCD474K601A3-[ SCD684K601A3-[ SCD105K601A3-[ SCD155K601A3-[ SCD205K601A3-[ SCD335K601A3-[ SCD475K601A3-[ SCD474K102D3-[ SCD684K102D3-[ SCD105K102D3-[ SCD155K102D3-[ SCD205K102D3-[ SCD224K122A3-[ SCD334K122A3-[ SCD474K122A3-[ SCD684K122A3-[ SCD105K122A3-[ SCD155K122A3-[ SCD205K122A3-[ SCD305K122C3-[ SCD224K162A3-[ SCD334K162A3-[ SCD474K162A3-[ SCD684K162A3-[ SCD105K162A3-[ SCD155K162A3-[ SCD205K162A3-[ SCD224K202A3-[ SCD334K202A3-[ SCD474K202A3-[ SCD684K202A3-[ SCD105K202A3-[ ELECTROCUBE PART NUMBER ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] 926B06474K-[ 926B06684K-[ 926B06105K-[ 926B06155K-[ 926B06205K-[ 926B06335K-[ 926B06475K-[ 926B10474K-[ 926B10684K-[ 926B10105K-[ 926B10155K-[ 926B10205K-[ 926B12224K-[ 926B12334K-[ 926B12474K-[ 926B12684K-[ 926B12105K-[ 926B12155K-[ 926B12205K-[ 926B12305K-[ 926B16224K-[ 926B16334K-[ 926B16474K-[ 926B16684K-[ 926B16105K-[ 926B16155K-[ 926B16205K-[ 926B20224K-[ 926B20334K-[ 926B20474K-[ 926B20684K-[ 926B20105K-[ ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] please consult factory CAP F VDC VAC 0.47 0.68 1.00 1.50 2.00 3.30 4.70 0.47 0.68 1.00 1.50 2.00 0.22 0.33 0.47 0.68 1.00 1.50 2.00 3.00 0.22 0.33 0.47 0.68 1.00 1.50 2.00 0.22 0.33 0.47 0.68 1.00 600 600 600 600 600 600 600 1000 1000 1000 1000 1000 1200 1200 1200 1200 1200 1200 1200 1200 1600 1600 1600 1600 1600 1600 1600 2000 2000 2000 2000 2000 330 330 330 300 300 400 400 500 500 500 500 500 580 580 580 580 580 580 580 580 630 630 630 630 630 630 630 630 630 630 630 630 dV/dt ESR Arms (V/s) Ipk(A) mW (55C) 250 250 200 150 150 300 250 700 500 400 400 400 650 650 500 500 500 400 400 400 650 650 650 650 500 400 400 800 800 600 600 600 118 170 200 225 300 825 1175 329 340 400 600 800 143 215 235 340 500 600 800 1200 143 215 306 442 500 600 800 176 264 282 408 600 9 7 5 4 3 5 4 8 7 5 3 5 19 13 10 7 5 4 4 5 19 12 10 7 6 5 5 19 13 10 8 6 9.2 11.5 14.0 17.1 20.7 35.0 46.2 12.1 14.4 17.5 22.4 26.2 7.9 10.0 12.0 15.1 18.5 23.9 30.1 39.7 7.9 10.0 12.6 15.3 19.5 25.6 30.6 8.2 10.5 13.0 16.1 21.3 DIMENSIONS (inches) W L H 0.970 1.140 1.140 1.140 1.270 1.500 1.825 1.140 1.140 1.140 1.370 1.500 0.970 1.140 1.140 1.370 1.370 1.500 1.825 3.000 0.970 1.140 1.270 1.370 1.500 1.650 1.750 0.970 1.140 1.350 1.500 1.825 1.850 1.850 1.850 1.850 1.775 2.050 2.225 1.850 1.850 1.850 1.775 2.050 1.850 1.850 1.850 1.775 1.775 2.050 2.225 2.475 1.850 1.850 1.775 1.775 2.050 2.700 2.625 1.850 1.850 2.200 2.050 2.225 0.950 1.050 1.050 1.050 1.400 1.500 1.975 1.050 1.050 1.050 1.400 1.500 0.950 1.050 1.050 1.400 1.400 1.500 1.975 1.500 0.950 1.050 1.400 1.400 1.500 1.500 1.825 0.950 1.050 1.200 1.500 1.975 Specify [-1] or [-2] as per P* on dimensional drawing above. (R) 3366 Pomona Blvd. * Pomona, CA 91768 * TEL: (909) 595-4037 * FAX: (909) 595-0186 e-mail: esales@electrocube.com * Internet: www.electrocube.com * (A: 5/00)