A6B273 8-Bit Latched, DMOS Power Driver Discontinued Product These parts are no longer in production The device should not be purchased for new design applications. Samples are no longer available. Date of status change: October 29, 2007 Recommended Substitutions: We recommend the A6B595 or A6801. NOTE: For detailed information on purchasing options, contact your local Allegro field applications engineer or sales representative. Allegro MicroSystems, Inc. reserves the right to make, from time to time, revisions to the anticipated product life cycle plan for a product to accommodate changes in production capabilities, alternative product availabilities, or market demand. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringements of patents or other rights of third parties which may result from its use. Data Sheet 26180.122b 6B273 8-BIT LATCHED DMOS POWER DRIVER 20 LOGIC SUPPLY 2 19 IN 8 IN 2 3 18 IN 7 OUT 1 4 17 OUT 8 OUT 2 5 16 OUT 7 OUT 3 6 15 OUT 6 OUT 4 7 14 OUT 5 IN 3 8 13 IN 6 IN 4 9 12 IN 5 GROUND 10 11 STROBE IN 1 VDD LATCHES 1 LATCHES CLEAR Dwg. PP-015-2A Note that the A6B273KA (DIP) and the A6B273KLW (SOIC) are electrically identical and share a common terminal number assignment. ABSOLUTE MAXIMUM RATINGS at TA = 25C Output Voltage, VO ............................... 50 V Output Drain Current, Continuous, IO .......................... 150 mA* Peak, IOM ................................... 500 mA Single-Pulse Avalanche Energy, EAS ................................................. 30 mJ Logic Supply Voltage, VDD .................. 7.0 V Input Voltage Range, VI ................................... -0.3 V to +7.0 V Package Power Dissipation, PD ........................................... See Graph Operating Temperature Range, TA ................................. -40C to +125C Storage Temperature Range, TS ................................. -55C to +150C * Each output, all outputs on. Pulse duration 100 s, duty cycle 2%. Caution: These CMOS devices have input static protection (Class 3) but are still susceptible to damage if exposed to extremely high static electrical charges. The A6B273KA and A6B273KLW combine eight (positive-edgetriggered D-type) data latches and DMOS outputs for systems requiring relatively high load power. Driver applications include relays, solenoids, and other medium-current or high-voltage peripheral power loads. The CMOS inputs and latches allow direct interfacing with microprocessor-based systems. Use with TTL may require appropriate pull-up resistors to ensure an input logic high. The DMOS output inverts the DATA input. All of the output drivers are disabled (the DMOS sink drivers turned OFF) with the CLEAR input low. The A6B273KA/KLW DMOS open-drain outputs are capable of sinking up to 500 mA. Similar devices with reduced rDS(on) are available as the A6273KA/KLW. The A6B273KA is furnished in a 20-pin dual in-line plastic package. The A6B273KLW is furnished in a 20-lead wide-body, small-outline plastic package (SOIC) with gull-wing leads for surfacemount applications. Copper lead frames, reduced supply current requirements, and low on-state resistance allow both devices to sink 150 mA from all outputs continuously, to ambient temperatures over 85C. FEATURES 50 V Minimum Output Clamp Voltage 150 mA Output Current (all outputs simultaneously) 5 Typical rDS(on) Low Power Consumption Replacements for TPIC6B273N and TPIC6B273DW Selection Guide Part Number Pb-free* Package Packing A6B273KLW-T A6B273KLWTR-T Yes Yes 20-pin SOICW 20-pin SOICW 37 per tube 1000 per reel RJA (C/W) 70 70 RJC (C/W) 17 17 *Pb-based variants are being phased out of the product line. Some variants cited in this footnote are in production but have been determined to be LAST TIME BUY or NOT FOR NEW DESIGN. This classification indicates that sale of this device is currently restricted to existing customer applications. The variants should not be purchased for new design applications because obsolescence in the near future is probable. Samples are no longer available. Status change for LAST TIME BUY: October 31, 2006. Deadline for receipt of LAST TIME BUY orders: April 27, 2007. These variants include: A6B273KLW and A6B273KLWTR. Status change for NOT FOR NEW DESIGN: May 1, 2006. These variants include: A6B273KA. 6B273 8-BIT LATCHED DMOS POWER DRIVER ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS LOGIC SYMBOL 2.5 1 R 11 C1 2.0 SU FF IX 1.5 'A ', R J A = SU FF IX 'LW ', R 1.0 55 C /W JA = 90 C /W 0.5 0 25 50 75 100 125 AMBIENT TEMPERATURE IN C 150 2 1D 4 3 1D 5 8 1D 6 9 1D 7 12 1D 14 13 1D 15 18 1D 16 19 1D 17 Dwg. FP-046-1A Dwg. GS-004B VDD OUT IN Dwg. EP-010-16 Dwg. EP-063 LOGIC INPUTS DMOS POWER DRIVER OUTPUT FUNCTION TABLE CLEAR L H H H Inputs STROBE X L INX OUTX X H L X H L H R L = Low Logic Level H = High Logic Level X = Irrelevant R = Previous State 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 W Copyright (c) 2002 Allegro MicroSystems, Inc. 6B273 8-BIT LATCHED DMOS POWER DRIVER FUNCTIONAL BLOCK DIAGRAM IN 1 D OUT 1 C1 STROBE CLR IN2 LOGIC SUPPLY IN 3 D OUT 2 C1 V DD CLR D OUT 3 C1 CLR IN 4 D OUT 4 C1 CLR IN5 D OUT 5 C1 CLR IN6 D OUT 6 C1 CLR IN 7 D OUT 7 C1 CLR IN8 D OUT 8 C1 CLEAR CLR GROUND (ACTIVE LOW) Dwg. FP-016-2 www.allegromicro.com 6B273 8-BIT LATCHED DMOS POWER DRIVER RECOMMENDED OPERATING CONDITIONS over operating temperature range Logic Supply Voltage Range, VDD ............... 4.5 V to 5.5 V High-Level Input Voltage, VIH ............................ 0.85VDD Low-level input voltage, VIL ................................. 0.15VDD ELECTRICAL CHARACTERISTICS at TA = +25C, VDD = 5 V, tir = tif 10 ns (unless otherwise specified). Limits Characteristic Logic Supply Voltage Output Breakdown Voltage Off-State Output Current Static Drain-Source On-State Resistance Symbol Test Conditions Min. Typ. Max. Units VDD Operating 4.5 5.0 5.5 V V(BR)DSX IO = 1 mA 50 -- -- V VO = 40 V, VDD = 5.5 V -- 0.1 5.0 A VO = 40 V, VDD = 5.5 V, TA = 125C -- 0.15 8.0 A IO = 100 mA, VDD = 4.5 V -- 4.2 5.7 IO = 100 mA, VDD = 4.5 V, TA = 125C -- 6.8 9.5 IO = 350 mA, VDD = 4.5 V (see note) -- 5.5 8.0 IDSX rDS(on) Nominal Output Current ION VDS(on) = 0.5 V, TA = 85C -- 90 -- mA Logic Input Current IIH VI = VDD = 5.5 V -- -- 1.0 A IIL VI = 0, VDD = 5.5 V -- -- -1.0 A tPLH IO = 100 mA, CL = 30 pF -- 150 -- ns tPHL IO = 100 mA, CL = 30 pF -- 90 -- ns Output Rise Time tr IO = 100 mA, CL = 30 pF -- 200 -- ns Output Fall Time tf IO = 100 mA, CL = 30 pF -- 200 -- ns IDD(OFF) VDD = 5.5 V, Outputs off -- 20 100 A IDD(ON) VDD = 5.5 V, Outputs on -- 150 300 A Prop. Delay Time Supply Current Typical Data is at VDD = 5 V and is for design information only. NOTE -- Pulse test, duration 100 s, duty cycle 2%. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 6B273 8-BIT LATCHED DMOS POWER DRIVER TIMING REQUIREMENTS 50% INx t su(D) 50% t h(D) t su(D) t h(D) 50% STROBE t PLH t PHL 90% OUTPUTx 10% tr tf Dwg. WP-036-1 Input Active Time Before Strobe (Data Set-Up Time), tsu(D) .............................................. 20 ns Input Active Time After Strobe (Data Hold Time), th(D) ................................................... 20 ns Input Pulse Width, tw(D) ....................................................... 40 ns Input Logic High, VIH ................................................ 0.85VCC Input Logic Low, VIL ................................................. 0.15VCC TEST CIRCUITS +15 V 10.5 INPUT 200 mH tav IAS = 500 mA IO DUT OUT VO V(BR)DSX VO(ON) Dwg. EP-066 EAS = IAS x V(BR)DSX x tAV/2 www.allegromicro.com Single-Pulse Avalanche Energy Test Circuit and Waveforms 6B273 8-BIT LATCHED DMOS POWER DRIVER TERMINAL DESCRIPTIONS Terminal No. Terminal Name Function 1 CLEAR When (active) LOW, all latches are reset and all outputs go HIGH (turn OFF). 2 IN1 CMOS data input to a latch. When strobed, the output then inverts the data input (IN1 = HIGH, OUT1 = LOW). 3 IN2 CMOS data input to a latch. When strobed, the output then inverts the data input (IN2 = HIGH, OUT2 = LOW). 4 OUT1 Current-sinking, open-drain DMOS output. 5 OUT2 Current-sinking, open-drain DMOS output. 6 OUT3 Current-sinking, open-drain DMOS output. 7 OUT4 Current-sinking, open-drain DMOS output. 8 IN3 CMOS data input to a latch. When strobed, the output then inverts the data input (IN3 = HIGH, OUT3 = LOW). 9 IN4 CMOS data input to a latch. When strobed, the output then inverts the data input (IN4 = HIGH, OUT4 = LOW). 10 GROUND Reference terminal for all voltage measurements. 11 STROBE A CMOS dynamic input to all latches. Data on each INx terminal is loaded into its associated latch on a low-to-high STROBE transition. 12 IN5 CMOS data input to a latch. When strobed, the output then inverts the data input (IN5 = HIGH, OUT5 = LOW). 13 IN6 CMOS data input to a latch. When strobed, the output then inverts the data input (IN6 = HIGH, OUT6 = LOW). 14 OUT5 Current-sinking, open-drain DMOS output. 15 OUT6 Current-sinking, open-drain DMOS output. 16 OUT7 Current-sinking, open-drain DMOS output. 17 OUT8 Current-sinking, open-drain DMOS output. 18 IN7 CMOS data input to a latch. When strobed, the output then inverts the data input (IN7 = HIGH, OUT7 = LOW). 19 IN8 CMOS data input to a latch. When strobed, the output then inverts the data input (IN8 = HIGH, OUT8 = LOW). 20 LOGIC SUPPLY (VDD) The logic supply voltage (typically 5 V). 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 6B273 8-BIT LATCHED DMOS POWER DRIVER A6B273KA Dimensions in Inches (controlling dimensions) 20 0.014 0.008 11 0.430 MAX 0.280 0.240 0.300 BSC 1 0.070 0.045 0.100 1.060 0.980 10 0.005 BSC MIN 0.210 MAX 0.150 0.115 0.015 MIN 0.022 0.014 Dwg. MA-001-20 in Dimensions in Millimeters (for reference only) 20 0.355 0.204 11 10.92 MAX 7.11 6.10 7.62 BSC 1 1.77 1.15 2.54 26.92 24.89 BSC 10 0.13 MIN 5.33 MAX 3.81 2.93 0.39 MIN 0.558 0.356 NOTES: 1. 2. 3. 4. Exact body and lead configuration at vendor's option within limits shown. Lead spacing tolerance is non-cumulative. Lead thickness is measured at seating plane or below. Supplied in standard sticks/tubes of 18 devices. www.allegromicro.com Dwg. MA-001-20 mm 6B273 8-BIT LATCHED DMOS POWER DRIVER A6B273KLW Dimensions in Inches (for reference only) 20 11 0.0125 0.0091 0.419 0.394 0.2992 0.2914 0.050 0.016 0.020 0.013 1 2 0.050 3 0.5118 0.4961 0 TO 8 BSC 0.0926 0.1043 Dwg. MA-008-20 in 0.0040 MIN. Dimensions in Millimeters (controlling dimensions) 20 11 0.32 0.23 10.65 10.00 7.60 7.40 1.27 0.40 0.51 0.33 1 2 1.27 3 13.00 12.60 BSC 0 TO 8 2.65 2.35 0.10 MIN. Dwg. MA-008-20 mm NOTES: 1. Exact body and lead configuration at vendor's option within limits shown. 2. Lead spacing tolerance is non-cumulative. 3. Supplied in standard sticks/tubes of 37 devices or add `TR' to part number for tape and reel. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 6B273 8-BIT LATCHED DMOS POWER DRIVER The products described here are manufactured under one or more U.S. patents or U.S. patents pending. Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current. Allegro products are not authorized for use as critical components in life-support devices or systems without express written approval. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use. www.allegromicro.com 6B273 8-BIT LATCHED DMOS POWER DRIVER POWER INTERFACE DRIVERS Function Output Ratings* Part Number SERIAL-INPUT LATCHED DRIVERS 8-Bit (saturated drivers) 8-Bit 8-Bit 8-Bit 8-Bit 8-Bit (constant-current LED driver) 8-Bit (constant-current LED driver) 8-Bit (DMOS drivers) 8-Bit (DMOS drivers) 8-Bit (DMOS drivers) -120 mA 350 mA 350 mA 350 mA 350 mA 75 mA 120 mA 250 mA 350 mA 100 mA 50 V 50 V 80 V 50 V 80 V 17 V 24 V 50 V 50 V 50 V 5895 5821 5822 5841 5842 6275 6277 6595 6A595 6B595 10-Bit (active pull-downs) -25 mA 60 V 5810-F and 6810 12-Bit (active pull-downs) -25 mA 60 V 5811 75 mA 17 V 6276 20-Bit (active pull-downs) -25 mA 60 V 5812-F and 6812 32-Bit (active pull-downs) 32-Bit 32-Bit (saturated drivers) -25 mA 100 mA 100 mA 60 V 30 V 40 V 5818-F and 6818 5833 5832 16-Bit (constant-current LED driver) PARALLEL-INPUT LATCHED DRIVERS 4-Bit 350 mA 50 V 5800 8-Bit 8-Bit 8-Bit (DMOS drivers) 8-Bit (DMOS drivers) -25 mA 350 mA 100 mA 250 mA 60 V 50 V 50 V 50 V 5815 5801 6B273 6273 SPECIAL-PURPOSE DEVICES Unipolar Stepper Motor Translator/Driver Addressable 8-Bit Decoder/DMOS Driver Addressable 8-Bit Decoder/DMOS Driver Addressable 8-Bit Decoder/DMOS Driver Addressable 28-Line Decoder/Driver 1.25 A 250 mA 350 mA 100 mA 450 mA 50 V 50 V 50 V 50 V 30 V 5804 6259 6A259 6B259 6817 * Current is maximum specified test condition, voltage is maximum rating. See specification for sustaining voltage limits. Negative current is defined as coming out of (sourcing) the output. Complete part number includes additional characters to indicate operating temperature range and package style. Internal transient-suppression diodes included for inductive-load protection. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000