SURFACE MOUNT DISPLAY P/N: KPDA03-102 Features SUPER BRIGHT GREEN Description 0.3 INCH DIGIT HEIGHT. The Super Bright Green source color devices are made LOW CURRENT OPERATION. with Gallium Phosphide Green Light Emitting Diode. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE :300PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB7940 REV NO: V.4 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 Selection Guide Part No. Dice KPDA03-102 Iv (ucd) @ 10mA Lens Type SUPER BRIGHT GREEN (GaP) WHITE DIFFUSED Description Min. Typ. 1200 5600 Common Anode, Rt. Hand Decimal Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Green D Dominant Wavelength 1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Green Units Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB7940 REV NO: V.4 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 4 Super Bright Green KPDA03-102 SPEC NO: DSAB7940 REV NO: V.4 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 4 KPDA03-102 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB7940 REV NO: V.4 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 4