TECHNICAL CHARACTERISTICS
MATERIALS AND FINISHES:
Insulator: Glass-filled DAP per ASTM-
D-5948 Type SDG-F. Gray color
is standard.
Fixed Contacts: Precision machined copper alloy,
gold flash over nickel. Other
finishes are available
upon request.
MECHANICAL CHARACTERISTICS:
Contacts:
Size 20 Fixed: Male contact, 1.02 mm [0.040
inch] mating diameter.
Female contact, open entry
is standard. “Closed Entry”
available on solder cup
termination for high reliability
applications.
Contact Retention
in Connector Insert: 44.5 N [10 Ibs.], minimum.
Contact Termination : Solder cup - 1.17 mm [0.046 inch]
hole diameter for 0.5mm2
[20 AWG] wire maximum.
Straight and right angle (90º)
printed board mount - 0.64 mm
[0.025 inch] termination diameter.
Locking Systems: Friction.
Polarization: Gender positioning of contacts.
Mechanical Operations:
Open Entry Contacts: 500 operations per IEC 60512-5.
Closed Entry Contacts: 1,000 operations per IEC 60512-5.
ELECTRICAL CHARACTERISTICS:
Contact Current Rating: 7.5 amperes, maximum.
Initial Contact Resistance: 0.010 ohms, maximum.
Flash over Voltage: 2000 VAC (rms).
Test Voltage: 1200 VAC (rms).
Insulation Resistance: 5 G ohms, minimum.
Clearance and Creepage: 0.97 mm [0.038 inch], minimum.
Working Voltage: 300 VAC (rms).
CLIMATIC CHARACTERISTICS:
Temperature Range: -55°C to +125°C.
Damp Heat, Steady State: 21 days
3
3
3
3
3
3
3
3
3
3
3
3
Catalog C-022 Rev. A
High Reliability
Size 20 fixed contacts, 7.5 amperes
Low Profile, countersink side mounting holes.
Connectors can be “stacked” side by side.
Male and female contacts can be configured
within individual connectors to provide
polarization and coding (keying) options.
Terminations include solder cup, straight and right
angle (90°) printed board mount.
Visit our web site for the latest catalog updates and supplements at http://www.connectpositronic.com/products/55/Utility/catalogs/
UL Recognized:
• UL File # E49351
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
GF / GFPL SERIES
PROFESSIONAL QUALITY UTILITY CONNECTORS
FIXED CONTACT / LOW PROFILE Positronic Industries
connectpositronic.com
Utility
Connectors
4.37 [0.172]
8.69 [0.342] 3.18 [0.125]
1.57 [0.062]
11.13 [0.438]
5.54 [0.218]
7.14 [0.281]
A B
Ø2.36 [Ø0.093] Panel shown for
reference only
4.37 [0.172]
8.69 [0.342]3.18 [0.125]
1.57 [0.062]
11.13 [0.438]
5.54 [0.218]
7.14 [0.281]
A B
Ø2.36 [Ø0.093]
Panel shown for
reference only
4.37 [0.172]
8.69 [0.342] 3.18 [0.125]
1.57 [0.062]
11.13 [0.438]
5.54 [0.218]
7.14 [0.281]
A C
Ø2.36 [Ø0.093] Panel shown for
reference only
4.37 [0.172]
8.69 [0.342]3.18 [0.125]
1.57 [0.062]
11.13 [0.438]
5.54 [0.218]
7.14 [0.281]
A C
Ø2.36 [Ø0.093]
Panel shown for
reference only
B D
6.35 [0.250] 6.35 [0.250]
B D
INSULATOR DIMENSIONS
MALE OR FEMALE CONTACTS MAY BE POPULATED IN ANY POSITION
RIGHT PANEL MOUNTED *1
RIGHT PANEL MOUNTED *1
LEFT PANEL MOUNTED *1
LEFT PANEL MOUNTED *1
GF 2-POLE
GF 4-POLE
SOLDER CUP TERMINATION
CODE SC
STRAIGHT SOLDER PRINTED BOARD MOUNT TERMINATION
CODE DS3, DS4, DS5 AND DS6
CONTACT
CODE L O.A.L.
DS3 2.36
[0.093]
17.37
[0.684]
DS4 3.18
[0.125]
18.19
[0.716]
DS5 3.96
[0.156]
18.97
[0.747]
DS6 4.75
[0.187]
19.79
[0.779]
13.43 [0.529]
19.05 [0.750]
Ø1.02±0.03
[0.040±0.001]
Ø1.17 [0.046] I.D.
L
O.A.L.
5.62 [0.221]
Ø1.02±0.03
[0.040±0.001]
Ø0.64 [0.025]
Typical part number:
GF1M1FASCL
Typical part number:
GF1M1FADS3L
Typical part number:
GF1M1FBSCR
Typical part number:
GF1M1FBDS3R
NOTE: *1 When viewing the connector from the rear with the “A” contact position down, the panel on the left dictates “L” Code while the panel on the right
dictates “R” code. See ordering information page “Step 5”.
GF / GFPL SERIES
PROFESSIONAL QUALITY UTILITY CONNECTORS
FIXED CONTACT / LOW PROFILE
Positronic Industries
connectpositronic.com
Utility
Connectors
2DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
A B
Panel shown for
reference only
Ø1.02±0.03
[0.040±0.001]
3.18 [0.125]
6.99 [0.275]
2.79 [0.110]
Nominal
Ø0.64 [0.025]
A B
Panel shown for
reference only
Ø1.02±0.03
[0.040±0.001]
3.18 [0.125]
2.79 [0.110]
Nominal
Ø0.64 [0.025]
B D
Panel shown for
reference only
Ø1.02±0.03
[0.040±0.001]
3.18 [0.125]
6.99 [0.275]
2.79 [0.110]
Nominal
Ø0.64 [0.025]
A C
Panel shown for
reference only
Ø1.02±0.03
[0.040±0.001]
3.18 [0.125]
2.79 [0.110]
Nominal
Ø0.64 [0.025]
A C
B D
6.99 [0.275]
VERTICAL PANEL MOUNTED *1
VERTICAL PANEL MOUNTED *1
HORIZONTAL PANEL MOUNTED
HORIZONTAL PANEL MOUNTED
GFPL 2-POLE
GFPL 4-POLE
RIGHT ANGLE (90°) PRINTED BOARD MOUNT TERMINATION
AVAILABLE IN VERTICAL OR HORIZONTAL MOUNTS
UNIQUE FEATURES
GF and GFPL connectors can be “STACKED” in building block fashion to create custom configurations.
Typical part number: GFPL2M000RV Typical part number: GFPL2M000H
Typical part number: GFPL2M2FAC0RV Typical part number: GFPL2M2FCD0H
NOTE: *1 When viewing the connector from the rear with the “A” contact position down, the panel on the left dictates “L” code while the panel on the right
dictates “R” code. See ordering information page “Step 5”.
NOTE:
Positronic
recommends the
use of a #2 82°
countersunk screw.
GF / GFPL SERIES
PROFESSIONAL QUALITY UTILITY CONNECTORS
FIXED CONTACT / LOW PROFILE Positronic Industries
connectpositronic.com
Utility
Connectors
3
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
ORDERING INFORMATION - CODE NUMBERING SYSTEM
ORDERING INFORMATION - CODE NUMBERING SYSTEM
Specify Complete Connector By Selecting An Option From Step 1 through 5.
Specify Complete Connector By Selecting An Option From Step 1 through 5.
STEP 12345-6
EXAMPLE GF 3M1F A DS5 L -14
STEP 1 - BASIC SERIES
GF - Solder cup or straight printed
board mount termination
STEP 2 - QUANTITY AND
GENDER OF CONTACTS
4 POLE INSULATOR
4M0 - 4 Male, No Female.
4F0 - 4 Female, No Male.
3M1F - 3 Male, 1 Female.
3F1M - 3 Female, 1 Male.
2M2F - 2 Male, 2 Female.
2 POLE INSULATOR
2M0 - 2 Male, No Female.
2F0 - 2 Female, No Male.
1M1F - 1 Male,1 Female.
STEP 3 - POSITION OF POLARIZING CONTACT
0 All contacts same gender
A, B, C, D Specify polarizing position(s) of contact(s) for
the second gender specified in Step 2 above.
EXAMPLES:
GF4M00DS3R No specification needed.
GF1M1FASCL Specifies “A” position of the female contact.
GF2M2FCDSCL Specifies “C” and “D” positions of the female contact.
STEP 4 - CONTACT TERMINATION TYPE
SC - Solder cup. For closed entry design, add ‘CE” in Step 6.
DS3 - Solder, Straight printed board mount with 2.36 [0.093] tail
length.
DS4 - Solder, Straight printed board mount with 3.18 [0.125] tail
length.
DS5 - Solder, Straight printed board mount with 3.96 [0.156] tail
length.
DS6 - Solder, Straight printed board mount with 4.75 [0.187] tail
length.
STEP 6 - SPECIAL OPTIONS
CE - Closed entry contacts on female
solder cup terminations
-14 - 0.000030 [0.76] gold over nickel.
Contact Technical Sales for special
options.
STEP 5 - MOUNTING OPTIONS
L - Left panel mount.
R - Right panel mount.
STEP 12345-6
EXAMPLE GFPL 2M2F AB 0 H -14
STEP 1 - BASIC SERIES
GFPL - Right angle (90°) printed
board mount termination
STEP 2 - QUANTITY AND
GENDER OF CONTACTS
4 POLE INSULATOR
4M0 - 4 Male, No Female.
4F0 - 4 Female, No Male.
3M1F - 3 Male, 1 Female.
3F1M - 3 Female, 1 Male.
2M2F - 2 Male, 2 Female.
2 POLE INSULATOR
2M0 - 2 Male, No Female.
2F0 - 2 Female, No Male.
1M1F - 1 Male, 1 Female.
STEP 3 - POSITION OF POLARIZING CONTACT
0 All contacts same gender
A, B, C, D Specify polarizing position(s) of contact(s) for
the second gender specified in Step 2 above.
STEP 4 - CONTACT TERMINATION TYPE
0 - Right angle (90°) printed board mount.
STEP 6 - SPECIAL OPTIONS
-14 - 0.000030 [0.76] gold over nickel.
Contact Technical Sales for special
options.
STEP 5 - MOUNTING OPTIONS
LV - Left panel vertical mount.
RV - Right panel vertical mount.
H - Horizontal mount.
POSITRONIC ASIA PTE LTD.
3014A Ubi Road 1 #07-01 • Singapore 408703
Telephone 65 6842 1419 • Fax 65 6842 1421
singapore@connectpositronic.com
POSITRONIC INDUSTRIES, S.A.S.
Zone Industrielle d’Engachies • 46 Route d’Engachies
France 32020 Auch Cedex 9
Telephone 33 5 6263 4491 • Fax 33 5 6263 5117
contact@connectpositronic.com
POSITRONIC INDUSTRIES, INC.
423 N Campbell Avenue • PO Box 8247 • Springfield, MO 65801
Tel 417 866 2322 • Fax 417 866 4115 • Toll Free 800 641 4054
info@connectpositronic.com
GF / GFPL SERIES
PROFESSIONAL QUALITY UTILITY CONNECTORS
FIXED CONTACT / LOW PROFILE
Positronic Industries
connectpositronic.com
Utility
Connectors
EXAMPLES:
GFPL4M000RV No specification needed.
GFPL3M1FA0H Specifies “A” position of the female contact.
GFPL2M2FCD0LV Specifies “C” and “D” positions of the female contact.
G F S E R I E SG F P L S E R I E S
w w w . c o n n e c t p o s i t r o n i c . c o m
